chapter 2 introduction to sketchup and 3d models … cooperative extension 229 chapter 2...
TRANSCRIPT
UNH Cooperative Extension 229
CHAPTER 2 Introduction to SketchUp
and 3D Models in Google
Earth
In this unit, we will use SketchUp to explore building 3D models and Google Earth to
view spatial data. SketchUp is a deceptively simple, extremely powerful tool for cre-
ating, viewing, and modifying 3D designs. SketchUp was designed to offer the ele-
gance and spontaneity of hand drawing with the speed and flexibility of digital
media. SketchUp functions somewhat like a CAD program, however, CAD applica-
tions are designed specifically for representing concrete information where as
SketchUp is used for exploration and design of concepts and ideas.
1. Open SketchUp
a) To open SketchUp double-click the GOOGLE SKETCHUP icon
on the desktop. If an icon is not present, use the Start Menu
instead. Usually, SketchUp can be found if you Click the
START BUTTON, select PROGRAMS, then GOOGLE SKETCHUP
6, then GOOGLE SKETCHUP.
Introduction to SketchUp and 3D Models in Google Earth
230 UNH Cooperative Extension
2. Elements of the SketchUp Interface
The SketchUp window should look similar to the one shown below.
NOTE: SketchUp’s interface is very easy to customize. If your interface looks different,
it may be because another user has previously changed the SketchUp settings on your
computer. Don’t worry about any minor differences, but ask an instructor if you can’t find
the features discussed below.
NOTE: When installing or running SketchUp and Google Earth for the first time, Startup
tips may appear when each program is opened.
Large Tool
Set
Status Bar
Title BarMenu Bar
Drawing Area
Standard Toolbars
Value Control Box
UNH Cooperative Extension231
3. Open An Existing SketchUp Document
a) From the FILE menu, choose OPEN... .
b) Browse to C:\CommunityMapping2007\SketchUp\UNHexample.skp, and
click OPEN.
Throughout the course of this workshop, you will work through the steps of creating
a similar 3D model. While SketchUp can be quick to learn and easy to use, there
are many tools and advanced techniques that are beyond the scope of this
workshop. This workshop will simply demonstrate how to extract image data from
Google Earth for use in SketchUp, how to build a 3D model using this data in
SketchUp, and how to display that model in Google Earth.
4. Navigating Within the SketchUp Interface
The SketchUp interface can be customized much like ArcMap or most windows
programs. The various toolbars can be moved and docked into whatever
configuration is comfortable to the user. In this exercise we’ll review some of the
basic tools for navigating within SketchUp.
a) Within the Large Tool set, usually on the left of the interface,
there are a number of navigating tools. They should look like
the tools shown to the right. Move the mouse over each of
the tools and look in the lower left corner of the status bar, a
description of each tool should be displayed.
b) Click on each tool and try navigating around the model.
TIP: Use the scroll wheel on the mouse to zoom in and out. If the mouse is set up to
accept the scroll wheel as a third button, you can click and hold down the scroll wheel
and use it to orbit around the model. If you click and hold the scroll wheel and then click
and hold the left mouse button, you will be able to pan around the model.
c) The Views toolbar, shown to the right, can be used to
quickly move to different preset views around the model.
Again, move the mouse over each of the tools and look in
the lower left corner of the interface to see a description of
their functions. Try clicking on each tool to see the different
views.
Introduction to SketchUp and 3D Models in Google Earth
232 UNH Cooperative Extension
5. Opening Google Earth, Panning and Zooming to a
Desired Area
SketchUp can be used to model just about anything from machine parts to buildings.
Any model built in SketchUp can be exported to Google Earth. Since we are
modeling buildings, we can use imagery from Google Earth to assist us. While
Google Earth can be quick to learn and easy to use, there are many tools and
advanced techniques that are beyond the scope of this workshop. For the purpose
of this exercise, we will only be going over how to navigate in Google Earth and how
to get an image into SketchUp.
a) To open Google Earth double-click the GOOGLE EARTH icon
on the desktop. If an icon is not present, use the Start Menu
instead. Usually, Google Earth can be found if you Click the
START BUTTON, select PROGRAMS, then GOOGLE EARTH, then
LAUNCH GOOGLE EARTH
b) When Google Earth launches, it should look similar to this:
Table of
Title BarNavigation Tools
Contents
Menu Bar
SearchTools
UNH Cooperative Extension233
c) In the FLY TO search tool type “Durham, NH.” This will zoom us to the area
needed for this project.
d) Use the mouse and Navigation tools to Zoom in closer. Pan to the area
needed for the exercise. Click and hold the left mouse button to orbit the
Earth, use the scroll wheel to zoom.
Tilt Control Zoom Control
Rotate
Control
Pan Controls
Introduction to SketchUp and 3D Models in Google Earth
234 UNH Cooperative Extension
TIP: Place the mouse cursor over an area you want to zoom to and double click the left
mouse button, Google Earth will automatically zoom in a fixed amount to the desired
area.
e) Once you have a good feel for the Navigation tools, move to the area shown
below. Make sure you are at the same extent and that N is facing up.
UNH Cooperative Extension235
6. Importing Google Earth Imagery Into SketchUp
a) Keeping Google Earth open, go back to SketchUp and start a new document
by going to the FILE menu, choose NEW... .
b) Use the Google toolbar to import the image to
SketchUp. Click on the Get Current View
icon on the tool bar
c) After a few moments, you will see that SketchUp has automatically imported
the image from Google Earth. It should look something like this:
NOTE: SketchUp may momentarily minimize while it is importing the image, this is nor-
mal. SketchUp should maximize again after it is finished. If it doesn’t, simply maximize
the SketchUp window yourself. All imagery imported from Google Earth comes into
SketchUp as a black and white image.
Introduction to SketchUp and 3D Models in Google Earth
236 UNH Cooperative Extension
7. Drawing in SketchUp
After the Google Earth image has been imported to SketchUp, we can start building
our model from the features in the image. To do this, we will use some of the basic
drawing tools found in the Large Tool Set. Before we can draw effectively, however,
we need to first understand the Axes in SketchUp. Within the SketchUp drawing
area you should see a blue, a green and a red line converging at the axes origin
point, these are known as the SketchUp axes.
It is important to orient the axes to the image so that they help us keep everything square
in the model.
a) Use the axes tool to move the axes origin point to a desired location, usually
the corner of a building.
UNH Cooperative Extension237
b) Once the axes tool has been placed on the corner of the building the origin
point will stay on the corner but the axes will rotate as you move the mouse. At
this point, you will need to orient the direction the red and green axes should
go.
c) First is the red axis. Move the mouse parallel to the building so that the red
axis is in the direction parallel to the building. Left mouse click to set the red
axis in that direction.
d) Do the same with the green axis, only this time make the green axis perpendic-
ular to the red axis but parallel to the other side of the building. It should look
something like this:
e) Now that the axes are in place, we can start to draw the foot print of our
building. The axes will help us to keep our lines square to each other. You will
see as you begin to draw that the LINE TOOL will actually snap or stick to the
blue, green and red axes when the tool is near them. This snapping or sticking
will be important when you begin to draw a line.
Introduction to SketchUp and 3D Models in Google Earth
238 UNH Cooperative Extension
f) Let’s begin by using some tools from the
Large tool set. We won’t be using all of
these tools. Most of them will be fairly
obvious in their function.
g) Left mouse click the LINE TOOL and move
the mouse to the origin of your axes. You
should see a dialog box appear that says
“Origin”. Left mouse click at that point, this
is the begining of the line.
h) Move in the direction of the green axis. If
you stay on or near the green axis, the line
you are drawing will snap to the axis. On
the green axis, left mouse click on the
opposite corner of the building.
i) Move the mouse in the direction of the red
axis to the opposite corner of the origin
point. Left mouse click on the corner and
continue around the rest of the building.
You should see a polygon form once you have completed the building foot-
print.
NOTE: The polygon may appear fractured by the image. This is due to the terrain that
was brought in by SketchUp from Google Earth. This will be corrected in the next few
steps.
Line
Tool
Arc
Tool
Tool
Eraser
Push/Pull
Tool
Tool
Tool
Tool
Tool
Tool
Select
Rectangle
Circle
Move
Rotate
Paint bucket
Tool
UNH Cooperative Extension239
j) Use the PUSH/PULL TOOL to raise the building to its proper height. The Push/
Pull Tool only works on faces of polygons.
k) Select the Push/Pull tool and move the mouse to the center of the polygon.
The face should change and have a dot pattern over it.
l) Left mouse click on the face and move the mouse forward, the face should be
pulled upward.
TIP: When creating models using the Push/Pull tool you may find the need to raise a
building to a specific height; this can be achieved by simply entering the desired value
with the keyboard. To do this click on a face with the Push/Pull tool and start to push or
pull the face in the direction you wish to go. Without clicking the mouse again, type in the
desired height on the keyboard (the value will show up in VCB (value control box)). Hit
enter. The face should now be pushed or pulled to the distance previously entered.
m) Try repeating the last few steps to create the other rectangular building in the
image. Remember to reorient the axes to the other building. Try using the
rectangle tool to speed up creating the building footprint.
Introduction to SketchUp and 3D Models in Google Earth
240 UNH Cooperative Extension
8. Creating Photorealistic Buildings
So far we have learned to build simple models using Google Earth Imagery and the draw-
ing tools. Now we will learn to create photorealistic buildings using photographs taken in
the field.
a) We will begin by bringing an existing SketchUp file into our model. Leaving the
current model open, go to the FILE menu, then choose IMPORT.
b) Change the file type to SketchUp files. Browse to
C:\CommunityMapping2007\SketchUp\Babcock.skp, and click OPEN. A
message will pop up asking if you want to place the file yourself, click Yes.
c) Move the imported SketchUp file relatively close to the location of the building.
It doesn’t need to be exact for the moment but make sure the model is on the
face of the Google Earth image (a pop up message will appear saying “On
face in group”)
d) Once the imported model has been placed close to where you want it, go to
the WINDOW menu and click on OUTLINER. A window will pop up.
e) Right click the Google Earth Snapshot and from the list click on UNLOCK. Right
click on Google Earth Snapshot again and select HIDE. You should see the
Google Earth Image disappear. Close the Outliner window.
f) In the drawing area, right click on the model that was just imported. Select
EXPLODE from the list.
g) Go to the WINDOW menu and click on OUTLINER. A window will pop up. Right
click on the Google Earth Snapshot and from the list click UNHIDE. You should
see the Google Earth Image reappear.
h) Right click on Google Earth Snapshot again and select LOCK. Close the Out-
liner window.
i) Orbit or pan the model so that you can easily select everything in the
imported model. Click on the SELECT TOOL in the large tool set.
Drag a box with the Select tool over the imported model. This will
select everything associated with the imported model.
TIP: If you left mouse click quickly three times on any entity in the imported model, it will
also select everything. Left mouse clicking two times on an entity in the model will select
everything touching that entity. For example, if you click twice on a face, it will select the
face and the lines outlining the face.
j) Once everything in the imported model has been selected, use the
MOVE TOOL to move the model to the exact location you want over the
image.
UNH Cooperative Extension241
k) Use the Push/Pull tool to raise the building 60’ (remember, Pull the building up
in the blue axis direction, type 60’, and hit enter)
l) Your model should look something like this:
Introduction to SketchUp and 3D Models in Google Earth
242 UNH Cooperative Extension
m) Now that we have our imported model raised to the correct height, we can
paste photos of the building onto the sides of the model. Orbit and pan so that
your view of the model looks like this:
n) Go to the FILE menu, then choose IMPORT. Change the file type to All Sup-
ported Image Types. Browse to
C:\CommunityMapping2007\SketchUp\Babcock2.jpg.
o) Click on the radio button “Use as Texture” on the right hand side of the window
under the preview and click OPEN.
UNH Cooperative Extension243
p) You see that SketchUp has automatically brought in the image and
selected the PAINT BUCKET TOOL to help you paste the image on the
side of the building.
q) Move the mouse to the lower left corner of the wall you are facing and try to
snap the tool to the corner (make sure you are on the face of the wall). When
you have it snapped click on this corner to lock the picture in place.
TIP: You can zoom in and out with the scroll wheel on the mouse to get the positioning
of the image just right. Remember that when using this technique it will zoom in and out
from the point that you have the cursor located at. Do not try to select any other tool until
you have placed the image otherwise it will be lost.
r) Once you have the lower left corner of the image snapped to the lower left cor-
ner of the wall on the model, move the cursor to the upper right corner of the
wall on the model and click to snap the picture to that corner. Your model
should look like this:
Introduction to SketchUp and 3D Models in Google Earth
244 UNH Cooperative Extension
s) Once the image has been placed onto the wall, we need to reposition the
image so that the wall in the image matches up to the wall in our model. Right
mouse click on the image, select TEXTURE from the list, and then POSITION.
t) Four push pins should appear on the corners of the image. Once the pins
have appeared, right mouse click on the image again and select FIXED PINS
from the list. This will uncheck Fixed pins and allow you to move the pins
where you need them.
u) Single left mouse click on one of the pins. This should allow you to move the
pin to another part of the image. Move the pin to the corner of the building in
the image that matches up with the corner it belongs to on the model.
v) Repeat this for the remaining pins.
UNH Cooperative Extension245
w) Now that a pin has been placed in each corner of the wall on the image, it is
time to move the pins back to the corner of the wall on the model. Doing this
will match the image to the model.
x) Left mouse click on a pin (be sure to hold the mouse button down on the pin).
Drag the pin to the appropriate corner in the model.
y) The snapping function in SketchUp should help you to snap the pin to the wall
corner in the model. The image will appear to stretch and distort as you move
the pin to the corner. Move the remaining pins in the same way. The wall in
the image should be positioned to the wall in the model once you have repos-
tioned all of the pins.
Introduction to SketchUp and 3D Models in Google Earth
246 UNH Cooperative Extension
z) After the pins have been positioned properly, press enter on the keyboard.
The portion of the image containing the wall of the building should be clipped
to the wall in the model.
aa) Try placing some of the other pictures in the same way onto the model.
UNH Cooperative Extension247
ab) The rest of the areas can be filled in with textures.
Left mouse click on the paint bucket tool in the
Large tool set. You will see a window appear that
says Materials.
ac) Click on the down arrow to see a drop down
menu of different materials and textures. Select
Brick and Cladding from the list.
ad) Click the first brick pattern called BRICK_ANTIQUE.
ae) With Brick_Antique selected as the texture, go
back to the model and use the Paint bucket tool to
“paint” other sections. Simply click on a face or
wall to paint it.
Introduction to SketchUp and 3D Models in Google Earth
248 UNH Cooperative Extension
9. Exporting to Google Earth
a) Now that our model is built, we need to get it back to Google Earth. Go to the
FILE menu, then choose EXPORT, then 3D MODEL.
b) Make sure the export type is set to Google Earth 4 (.kmz). Name the file and
save it in an appropriate place (C:\CommunityMapping2007\SketchUp\).
c) Click the Export button to export the model. After viewing the export statistics,
click okay.
d) Reopen Google Earth if it is not already open. Go to the FILE menu, then
choose OPEN. Browse to where you saved your model, select it and click
OPEN.
e) Google Earth should automatically zoom to where your model is on the Earth.
UNH Cooperative Extension249
Introduction to SketchUp and 3D Models in Google Earth
250 UNH Cooperative Extension