chapter - 1 :...
TRANSCRIPT
189
CHAPTER - 1 : BIBLIOGRAPHY
[1] P. J. Ward, H. V. Atkinson, P. R. G. Anderson, L. G. Elias, B. Garcia, L. Kahlen and
J-M. Rodriguez-Ibabe, “Semi-solid processing of novel MMCs based on
hypereutectic aluminium-silicon alloys” Acta Materialia, Vol. 44, No. 5, 1996,
pp.1717-1727.
[2] C. M. Ward-Close, L. Chandrasekaran, J. G. Robertson, S. P. Godfrey and D. P.
Murgatroyde, “Advances in the fabrication of titanium metal matrix composite”,
Materials Science and Engineering A, Vol. 263, No. 2, 1999, pp. 314-318.
[3] Yoshiaki Shimizu, Toshiyasu Nishimura and Iwao Matsushima, “Corrosion
resistance of Al-based metal matrix composites”, Materials Science and Engineering
A, Vol. 198, No.1-2, 1995, pp.113-118.
[4] C. Chen and F. Mansfeld, “Corrosion protection of an Al 6092/SiCp metal matrix
composite”, Journal Corrosion Science, Vol.39, No.6, 1997, pp.1075-1082.
[5] D. J. Blackwood, A. W. C. Chua, K. H. W. Seah, R. Thampuran and S. H. Teoh ,
“Corrosion behaviour of porous titanium–graphite composites designed for surgical
implants”, Corrosion Science, Vol. 42, No.3, 2000, pp. 481-503.
[6] F. E. Kennedy, A. C. Balbahadur and D. S. Lashmore “The friction and wear of Cu-
based silicon carbide particulate metal matrix composites for brake applications”,
Wear, Vol. 203-204, 1997, pp.715-721.
[7] H. Akbulut, M. Durman and F. Yilmaz, “Dry wear and friction properties of -Al2O3
short fiber reinforced Al-Si (LM 13) alloy metal matrix composites”, Wear, Vol.
215, No.1-2, 1998, pp.170-179.
[8] Hans Berns, “Comparison of wear resistant MMC and white cast iron”, Wear,
190
Vol.254, No.1-2, 2003, pp.47-54.
[9] H. Z. Wang, S. Q. Wu and S. C. Tjong, “Mechanical and wear behavior of an Al/Si
alloy metal-matrix composite reinforced with aluminosilicate fiber”, Composites
Science and Technology, Vol.56, No. 11, 1996, pp.1261-1270.
[10] L. Weber, J. Dorn and A. Mortensen “On the electrical conductivity of metal matrix
composites containing high volume fractions of non-conducting inclusions”, Acta
Materialia, Vol. 51, No.11, 2003, pp.3199-3211.
[11] J. Koráb, P. Štefánik, Š. Kavecký, P. Šebo and G. Korb, “Thermal conductivity of
unidirectional copper matrix carbon fibre composites”, Composites Part A: Applied
Science and Manufacturing, Vol. 33, No.4, 2002, pp.577-581.
[12] J. LLorca, “High temperature fatigue of discontinuously-reinforced metal–matrix
composites”, International Journal of Fatigue, Vol.24, No. 2-4, 2002, pp.233-240.
[13] Z. Y. Ma and S. C. Tjong, “The high-temperature creep behaviour of 2124
aluminium alloys with and without particulate and SiC-whisker reinforcement”,
Composites Science and Technology, Vol.59, No.5, 1999, pp. 737-747.
[14] S. C. Tjong and Z. Y. Ma, “The high-temperature creep behaviour of aluminium-
matrix composites reinforced with SiC, Al2O3 and TiB2 particles”, Composites
Science and Technology, Vol.57, No.6, 1997, pp.697-702.
[15] Everett R.K., Arsenault R.J., “Metal Matrix composites: processing and interfaces”,
Academic press, 1991
[16] Everett R.K., Arsenault R.J., “Metal Matrix composites: mechanism and properties”,
Academic press, 1991
[17] Zhonghao Jiang, Jianshe Lian, Dezhuang Yang, Shangli Dong, “An analytical study
191
of the influence of thermal residual stresses on the elastic and yield behaviors of
short fiber-reinforced metal matrix composites ” Materials Science and Engineering,
A248, 1998, pp.256–275.
[18] T.S. Arjun, P. Thakur, H. Vaidya, K. Singh, D.K. Dwivedi, Sliding wear and friction
behaviour of Al–18% Si–0.5% Mg alloy, J. Mater. Process. Technol. 152 (2004)
323–328.
[19] M. Acilar, F. Gul, Effect of the applied load, sliding distance and oxidation on the
dry sliding wear behaviour of Al–10Si/SiCp composites produced by vacuum
infiltration technique, Mater. Des. 25 (2004) 209–217.
[20] A.K. Prasada Rao, Karabi Das, B.S. Murthy, M. Chakraborty, Effect of grain
refinement on wear properties of Al and Al–7Si alloy, Wear 257 (2004) 148–153.
[21] K.G. Basavakumar, P.G. Mukunda,M.Chakraborty, Influence of grain refinement
and modification on dry sliding wear behaviour of Al–7Si and Al–7Si–2.5Cu cast
alloys, J. Mater. Process. Technol. 186 (2007) 236–245.
[22] A.K. Dey, P. Poddar, K.K. Singh, K.L. Sahoo, Mechanical and wear properties of
rheocast and conventional gravity die cast A356 alloy, Mater. Sci. Eng. A 435/436
(2006) 521–529.
[23] D. Casellas, A. Beltran, J.M. Prado, A. Larson, A. Romero, Microstructural effects
on the dry wear resistance of powder metallurgy Al–Si alloys, Wear 257 (2004)
730–739.
[24] K.V. Ojha, A. Tomar, D. Singh, G.C. Kaushal, Shape, microstructure and wear of
spray formed hypoeutectic Al–Si alloys, Mater. Sci. Eng. A 487 (2008) 591–596.
[25] G. Meijer, F. Ellyin, and Z. Xia, “Aspects of residual thermal stress/strain in particle
192
reinforced metal matrix composites”, Composites: Part B, Vol.31, 2000, pp.29–37.
[26] G.K. Hu, G.J. Weng, “Influence of thermal residual stresses on the composite
macroscopic behavior”, Mechanics of Materials, Vol.27, 1998, pp.229–240.
[27] Kurmura T. and King J.E., “Residual stress effect on crack initiation and growth in
Al/SiC MMCs,” Proceeding of the Fourth European conference on residual
stresses, June, 4-6,1996, Vol. 1, pp.499-508.
[28] S. Mukherjee, C. R. Ananth, and N. Chandra, “Effect of residual stresses on the
interfacial fracture behavior of metal-matrix composites”, Composites Science and
Technology, Vol.57, 1999, pp.1501-1512.
[29] Lu. J., Miège, B., Flavenot, J.F., and Thery, S., “Study on the effect of surface
treatment on the residual stress gradient in silicon carbide(SiC) reinforeced
aluminium metal matrix composites”, Journal of Composites Technology and
Research, JCTRER, Vol.12, 1990
[30] J. Li, J. Lu, M. Perrin, M. Ceretti, and A. Lodini, “Study of residual stress in cold-
rolled 7075 Al-SiC whisker-reinfored composites by x-ray and neutron diffraction”.
Journal of Composites Technology & Research. Vol.17, No.3, 1995, pp.194-198.
[31] J. Li, J. Lu, M. Perrin, M. Ceretti, and A. Lodini, “Study of residual stress in a metal
matrix composite by neutron diffraction and X-ray diffraction method”, Proceedings
of the SEM spring conference, SEM, Grand rapids, June 1995, pp.745-750.
[32] C.Oman Nonga, J. Lu, H.P.Lieurade, J.F. Flavenot, and C, Bathias, “Grenaillage de
précontrainte étude paramétrique dans le cas de composites a matrice metallique Al-
SiCw”, Materiaux composites à matrice métallique, Oct. 1993, pp.49-56.
[33] C.Oman Nonga, J. Lu, H.P.Lieurade, and J.F. Flavenot, “The Influence of residual
193
stresses and surface finish on the fatigue resistance of metal matrix composites”,
ICRS-5, June, 16-18, 1997, Linkoping, Sweden, pp.95-100.
[34] C.Oman Nonga, J. Lu, H.P.Lieurade, J.F. Flavenot, and C, Bathias, “Study of
residual stress produced in metal matrix composite Al-SiCw by shot peening”, The
5th
international conference on shot peening, 13-17, September, 1993, pp.290-299.
[35] C.Oman Nonga, J. Lu, H.P. Lieurade, and J.F. Flavenot, “ Residual stresses induced
by different manufacturing techniques and their effect on the fatigue behaviour of
the metal matrix composites Al2 O3”, Proceedings of the SEM spring conference,
SEM, Grand rapids, June 1995, pp.751-757.
[36] C.Oman Nonga, “Influence combinée des contraintes residuelles et de l‟état de
surface sur le comportement monotone et cyclique des matériaux composites a
matrice métallique”, PhD thesis, 1994
[37] Eric Hanus, and Torsten Ericsson, “Effect of pressure rolling on the residual stress
state of a particulate-reinforced metal matrix composite”, Material Science and
Engineering, A190, 1995, pp.155-163.
[38] Eric Hanus, and Torsten Ericsson, “Influence of fout-point bending fatigue on the
residual stress state of a pressure-rolled, particulate-reinforced methal matrix
composite”, Material Science and Engineering, A194, 1995, pp.147-156.
[39] L. Liao, D. Lai, and J. Lu, “Influence of surface treatment on the fatigue life of a
SiCp/Al composite”, Mat-Tec 96, pp.149-156.
[40] Tohriyama S., Kumano M., and Hisamatsu S., “Influence of peening in the fatigue
life of SiC reinforced aluminum”, Proceeding of the Fourth International conference
on shot peening, pp.307-316.
194
[41] Zong BY, Derby B. Characterization of microstructural damage during plastic strain
of a particulate-reinforced metal matrix composite at elevated temperature. J Mater
Sci 1996;31:297–303.
[42] D. Retraint and J. Lu, “Study of residual stress distribution by the combination of
three techniques in an aluminium based MMC”, Materials Science Forum,
Vols.347-349, 2000, pp.498-503.
[43] B. Reynier, P. Handmar, and J.M. Sprauel, “Macro-residual-stresses induced by the
shot peening of heterogeneous materials: Evaluation by X-ray diffraction”, ICRS-5,
June 16-18, 1997, Linkoping, Sweden, pp.101-106.
[44] Kim WJ, Lee YS, Moon SJ, Hong SH. High strain rate superplasticity in powder
metallurgy aluminium alloy 6061 + 20 vol% SiCp composite with relatively large
particle size. Mater Sci Technol 2000;16(6):675–80.
[45] Couturier L, Lieurade H P, Flavenot J F, and Lu Jian, “Fatigue strength behaviour of
metal matrix composites”, Mecanique Industrielle et Materiaux, 1997, Vol.50, No.3,
pp.116-121.
[46] Cook C.R., Yun D.L. and Hunt W.H., “System optimization for squeeze cast
composites”, International symposium on advances in cast reinforced metal matrix
composites, 1988, Chicago, pp.195-204.
[47] B.W. Chua, L. Lu, M.O. Lai, “Influence of SiC particles on mechanical properties of
Mg based composite ” Composite Structures, Vol.47, 1999, pp.595-601.
[48] William C. Harrigan Jr., “Commercial processing of metal matrix composites”,
Materials Science and Engineering, A244, 1998, pp.75–79.
[49] T. Weissgarber, B.F. Kieback, Mat. Sci. Forum 343–346 (2000) 275
195
[50] B.Q. Han, K.C. Chan, “Superplastic deformation mechanisms of particulate
reinforced aluminium alloy matrix composites”, Materials Science and Engineering,
A212, 1996, pp.256-264.
CHAPTER - 2 : BIBLIOGRAPHY
[1] S.F. Moustafa, Z. Abdel-Hamid, and A.M. Abd-Elhay, “Copper matrix SiC and
Al2O3 particulate composites by powder metallurgy technique”, Materials
Letters,Vol. 53, 2002, pp.244–249.
[2] Kuen-Ming Shu, G.C. Tu, “The microstructure and the thermal expansion
characteristics of Cu/SiCp composites”, Materials Science and Engineering, A00,
2002, pp.1-12.
[3] Osman Yilmaz, Mustafa Aksoy, “The effects of production parameters on the
electrical receptivity of Cu/M7C3-M23C6 MMCs”, Journal of Materials Processing
Technology, 110, 2001, pp.177-181.
[4] J. H. Tweed, “Manufacture of 2014 aluminium reinforced with SiC particulate by
vacuum hot pressing”, Materials Science and Engineering A, Vol.135, No. 30, 1991,
pp.73-76.
[5] N. Popovska, H. Gerhard, D. Wurm, S. Poscher, G. Emig and R. F. Singer,
“Chemical vapor deposition of titanium nitride on carbon fibres as a protective layer
in metal matrix composites”, Materials and Design, Vol.18, No.4-6, 1997, pp. 239-
242.
[6] J. P. A. Löfvander, F. -C Dary , U. Ruschewitz and C. G. Levi, “Evolution of a
metastable FCC solid solution during sputter deposition of Ti-Al-B alloys”,
Materials Science and Engineering A, Vol.202, No.1-2, 1995, pp.188-192.
196
[7] S. Skolianos, “Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg
alloy”, Materials Science and Engineering A, Vol.210, No.1-2, pp. 76-82.
[8] G. Kang C. and H. Seo Y, “The influence of fabrication parameters on the
deformation behaviour of the preform of metal-matrix composites during the
squeeze-casting processes”, Journal of Materials Processing Technology, Vol.61,
No.3, 1996, pp.241-249.
[9] J. Vicens, M. Chédru and J. L. Chermant, “New Al–AlN composites fabricated by
squeeze casting: interfacial phenomena”, Composites Part A: Applied Science and
Manufacturing, Vol.33, No.10, 2002, pp. 1421-1423.
[10] Afonso CRM, Kiminami CS, Bolfarini C, et al. “Microstructural characterizatin of
spray deposited Al-Y-Ni-Co-Zr alloy and Al-Y-Ni-Co-Zr+SiCp metal matrix
composite” Material Science Forum, Vol.403, 2002, pp.95-100.
[11] J. T. Lin, D. Bhattacharyya and C. Lane, “Machinability of a silicon carbide
reinforced aluminium metal matrix composite”, Wear, Vol.181-183, Part 2 , 1995,
pp.883-888.
[12] Ü. Cöcenand and K. Önel, “The production of Al-Si alloy-SiCp composites via
compocasting: Some microstructural aspects”, Materials Science and Engineering A,
Vol.221, No.1-2, 1996, pp.187-191.
[13] J.W. Kaczmar, K. Pietrzak, and W. Wlosiński, “The production and application of
metal matrix composite materials”, Journal of Materials Processing Technology,
Vol.106, 2000, pp.58-67.
[14] S.C. Tjong, Z.Y. Ma, “Microstructural and mechanical characteristics of in situ
metal matrix composites”, Materials Science and Engineering, Vol.29, 2000, pp.49-
197
113.
[15] Z. Y. Ma, S. C. Tjong and L. Gen, “In-situ Ti-TiB metal–matrix composite prepared
by a reactive pressing process”, Scripta Materialia, Vol.42, No.4, 2000, pp.367-373.
[16] C. Raghunath, M. S. Bhat and P. K. Rohatgi, “In situ technique for synthesizing Fe-
TiC composites”, Scripta Metallurgica et Materialia, Vol.32, No.4, 1995, pp.577-
582.
[17] Schajer G S. “Measurement of non-uniform residual stresses using the hole drilling
method, part I-stresses calculation procedures”, J. Eng. Mater. Technol. Vol.110,
No.4, 1988, pp.338-343.
[18] G. Bartos, K. Xia, in: Proceedings of the Fourth International Conference on Semi
Solid Processing of Alloys and Composites, University of Sheffield, UK, 1996, p.
290.
[19] M.P. Kenney, J.A. Courtois, et al., Metal Handbooks: Casting, 9th
ed., vol. 15, ASM
International, Metals Park, OH, USA, 1998, p. 331.
[20] D. Brabazon, D.J. Browne, A.J. Carr, J.C. Healy, in: Proceedings of the Fifth
International Conference on Semi-Solid Processing of Alloys and Composites, 2000,
p. 21
[21] T. Witulski, A. Winkelmann, G. Hirt, in: Proceedings of the Fourth International
Conference on Semi-Solid Processing of Alloys and Composites, University of
Sheffield, UK, 1996, p. 242.
[22] W. Wang, F. Ajersch, in: Proceedings of the International Symposium on Advances
in Production and Fabrication of Light Metals and MMC, Alta., Edmonton, Canada,
1992, p. 629.
198
[23] Hashim J, Looney L, Hashmi MSJ. Particle distribution in cast metal matrix
composites – Part I. J Mater Process Technol 2002;123(2):251–7.
[24] Prangnell PB, Barnes SJ, Withers PJ, Roberts SM. The effect of particle distribution
on damage formation in particulate reinforced metal matrix composites deformed in
compression. Mater Sci Eng A 1996;220(1–2):41–56.
[25] Yotte S, Breysse D, Riss J, Ghosh S. Cluster characterisation in a metal matrix
composite. Mater Charact 2001;46(2–3):211–9.
[26] Doel TJA, Bowen P. Tensile properties of particulate reinforced metal matrix
composites. Composites Part A 1996;27 A:655–65.
[27] Bindumadhavan PN, Chia TK, Chandrasekaran M, Wah Heng Keng, Lam Loh Nee,
Prabhakar O. Effect of particle-porosity clusters on tribological behavior of cast
aluminum alloy A356- SiCp metal matrix composites. Mater Sci Eng A 2001;315(1–
2): 217–26.
[28] Hong SJ, Kim HM, Huh D, Suryanarayana C, Chun BS. Effect of clustering on the
mechanical properties of SiC particulate reinforced aluminium alloy 2024 metal
matrix composites. Mater Sci Eng 2003; A347:198–204.
[29] Llorca J. Fatigue of particle- and whisker-reinforced metal-matrix composites. Progr
Mater Sci 2002; 47(3):283–353.
[30] Manoharan M, Lewandowski JJ. Crack initiation and growth toughness of an
aluminum metal-matrix composite. Acta Metall et Mat 1990;38(3):489–96.
[31] Vasudevan AK, Sandananda K. Fatigue crack growth in metal matrix composites.
Int J Fatigue 1994;16(3):227–332.
[32] Mason JJ, Ritchie RO. Fatigue crack growth resistance in SiC particulate and
199
whisker reinforced P/M 2124 aluminum matrix composites. Mater Sci Eng A
1997;231(1–2):170–82.
[33] Vaidya AR, Lewandowski JJ. Effects of SiCp size and Vol. fraction on the high
cycle fatigue behavior of AZ91D magnesium alloy composites. Mater Sci Eng A
1996;220(1–2):85–92.
[34] Klimowicz TF. The large scale commercialisation of aluminiummatrix composites.
JOM 1994;46(11):49–53.
[35] Ferry M, Munroe PR. Hot working behaviour of Al-Al2O3 particulate reinforced
metal matrix composite. Mater Sci Technol 1995;11(7):633–40.
[36] Zhi-guo YANG, Shi-guo LONG, Damage analysis for particle reinforced metal
matrix composite by ultrasonic method, Transactions of Nonferrous Metals Society
of China, Volume 16, Supplement 2, June 2006, Pages s652-s655
[37] A.M. Samuel, H. Liu, F.H. Samuel, On the castability of Al-Si/SiC particle-
reinforced metal-matrix composites: Factors affecting fluidity and soundness,
Composites Science and Technology, Volume 49, Issue 1, 1993, Pages 1-12
[38] Radhakrishna Bhat BV, Mahajan YR, Roshan HMd, Prasad YVRK. Processing map
for hot working of 6061 Al-10vol% Al2O3 metal matrix composite. Mater Sci
Technol 1995;11(2):167–72.
[39] Radhakrishna Bhat BV, Mahajan YR, Prasad YVRK. Effect of volume fraction of
SiCp reinforcement on the processing maps for 2124 Al matrix composites. Metall
Mater Trans 2000;31A(3):629–39.
[40] Ferry M, Munroe PR. Microstructure and kinetics of recrystallisation of hot
deformed Al-nano Al2O3 particulate reinforced metal matrix composite. Mater Sci
200
Technol 1995;11(8):734–40.
[41] Xia X, Sakaris P, McQueen HJ. Hot deformation, dynamic recovery and
recrystallisation behaviour of aluminium 6061-SiCp composite. Mater Sci Technol
1994;10(6):487–96.
[42] Styles CM, Sinclair I, Gregson PJ, Flitcroft SM. Effect of microstructure on
mechanical properties of thermomechanically processed 2124-SiCp metal matrix
composite. Mater Sci Technol 1994;10(6):475–80.
[43] Zong BY, Derby B. Characterization of microstructural damage during plastic strain
of a particulate-reinforced metal matrix composite at elevated temperature. J Mater
Sci 1996;31:297–303.
[44] Kosar Iqbal, Shafi-Ullah Khan, Arshad Munir, Jang-Kyo Kim, Impact damage
resistance of CFRP with nanoclay-filled epoxy matrix,
Composites Science and Technology, Volume 69, Issues 11–12, September 2009,
Pages 1949-1957
[45] K. Majeed, M. Jawaid, A. Hassan, A. Abu Bakar, H.P.S. Abdul Khalil, A.A. Salema,
I. Inuwa, Potential materials for food packaging from nanoclay/natural fibres filled
hybrid composites, Materials & Design, Volume 46, April 2013, Pages 391-410
[46] Xu H, Palmiere EJ. Particulate fracture during the thermomechanical processing of
a SiCp/Al metal matrix composite. Mater Sci Forum 1996;217–222(2):1091–6.
[47] Vedani M, Pozzi M, Tuissi A. Microstructural and damage behaviour of Al-
6061/Al2O3P composites during hot and cold rolling. In: Proceedings of the
international conference Euromat 2001. Rimini: AIM publisher; 2001. p. 411.
[48] Kim WJ, Lee YS, Moon SJ, Hong SH. High strain rate superplasticity in powder
201
metallurgy aluminium alloy 6061 + 20 vol% SiCp composite with relatively large
particle size. Mater Sci Technol 2000;16(6):675–80.
[49] G.M. Zhao, Y.Q. Yang, W. Zhang, X. Luo, B. Huang, Y. Chen, Microstructure and
grain growth of the matrix of SiCf/Ti–6Al–4V composites prepared by the
consolidation of matrix-coated fibers in the β phase field
Composites Part B: Engineering, Volume 52, September 2013, Pages 155-163
[50] Ko B-C, Park G-S, Yoo Y-C. The effects of SiC particle volume fraction on the
microstructure and hot workability of SiCp/AA 2024 composites. J Mater Process
Technol 1999;95:210–5.
[51] Vedani M, Gariboldi E. Hot forming related properties of Al6061/Al2O3 and Al
2618/Al2O3 composites. In: Proceedings of the international Conference Limat
2001, Centre for Advanced Aerospace Materials, Pohang University of Science and
Technology, Pusan; 2001. pp. 375–80.
[52] Prasad YVRK, Sasidhara S. Hot working guide – a compendium of processing
maps. ASM International Publisher; 1997.
[53] Narayana Murty SVS, Nageswara Rao B. Instability map for hot working of 6061
Al-10 vol% Al2O3 metal matrix composite. J Phys D 1998;31:3306–11.
[54] Narayana Murty SVS, Nageswara Rao B, Kashyap BP. Processing map for hot
working of powder metallurgy 2124 Al-20vol.% SiCp metal matrix composite. Adv
Compos Lett 2000;9(2):147–51.
[55] L.C. Pathak, D. Bandyopadhay, S. Srikanth, S. Kumar, P. Ramahandraarao, Effect of
heating rates on synthesis of Al2O3–SiC composite by the self-propagating high-
temperature synthesis (SHS) technique, J. Am. Ceram. Soc. 84 (5) (2001) 915–920.
202
[56] C.Wei, P.F. Becher, Development of SiC whisker reinforced ceramics, Am. Ceram.
Soc. Bull. 64 (2) (1985) 298–304.
[57] T.N. Tieges, P.F. Becher, Sintered Al2O3–SiC whisker composites, Am. Ceram.
Soc. Bull. 66 (2) (1987) 339–342.
[58] J. Homeny, W.L. Vaughn, Silicon carbide whisker–alumina composites; effect of
whiskers surface treatment on fracture toughness, J. Am. Ceram. Soc. 73 (2) (1990)
394–402.
[59] J. Zhao, L.C. Steans, M.P. Harmer, H.M. Chan, G.A. Miller, R.F. Cook, Mechanical
behavior of alumina–silicon carbide nanocomposites, J. Am. Ceram. Soc. 76 (2)
(1993) 503–510.
[60] L.S. Aboyon, H.H. Nersisyan, S.L. Kharatyan, R. Orru, R. Saiu, G. Cao, D. Zedda,
Synthesis of alumina–silicon carbide composites by chemically activated self-
propagating reactions, Ceram. Int. 27 (2001) 163–169.
[61] Y.J. Lin, C.-P. Tsang, The effect of starting precursors on the carbothermal synthesis
of SiC powders, Ceram. Int. 29 (2003) 69– 75.
[62] A.K. Samanta, K.K. Dhargupta, S. Ghatak, Near net shape SiC–mullite composites
from a powder precursor prepared through an intermediate Al-hydroxyhydrogel,
Ceram. Int. 27 (2001) 195–199.
[63] T.J. Whalen, Processing and properties of structural silicon carbide, Ceram. Eng.
Sci. Proc. 7 (7–9) (1986) 1135–1143.
[64] G.C.Wei, P.F. Beher, Improvement in mechanical properties in SiC by addition of
TiC particle, J. Am. Ceram. Soc. 647 (8) (1984) 571–574.
[65] M.A. Janney, Microstructural development and mechanical properties of SiC and
203
SiC–TiC composites, Am. Ceram. Soc. Bull. 65 (2) (1986) 357–362.
[66] W.H. Gu, K.T. Faber, R.W. Steinbreech, Microcracking and R-curve behavior in
SiC–TiB2 composites, Acta Metall. Mater. 40 (11) (1992) 3121–3128.
[67] M.A. Janney, Mechanical properties and oxidation behaviour of a hot pressed SiC–
15% vol. TiB2 composites, Am. Ceram. Soc. Bull. 66 (2) (1987) 322–324.
[68] P. Chantikul, G.R. Anatis, B.R. Lawn, D.B. Marshall, A critical evaluation of
indentation technique for measuring fracture toughness. II. Strength method, J. Am.
Ceram. Soc. 64 (9) (1981) 539–543.
[69] M.I. Osendi, B.A. Bender, D. Lewis III, Microstructure and mechanical properties of
mullite–silicon carbide composites, J. Am. Ceram. Soc. 72 (6) (1989) 1049–1054.
[70] J.W. Milewski, Efficient use of whisker in the reinforcement of ceramics, Adv.
Ceram. Mater. 1 (1) (1986) 36–41
[71] S. Wu, N. Claussen, Fabrication and properties of low-shrinkage reaction-bonded
mullite, J. Am. Ceram. Soc. 74 (1991) 2460–2463.
[72] A.K. Samanta, K.K. Dhargupta, S. Ghatak, Retention of SiC during development of
SiC–MxSi yOz composites {M = Al, Zr, Mg} by reaction bonding in air, J. Eur.
Ceram. Soc. 20 (12) (2000) 889–1894
[73] McLeod, A.D. in „Proc. Int. Conf. on Fabrication of Particulates Reinforced Metal
Composites‟ (EdsJ. Masounave and F.G. Hamel), ASM International, Metals Park,
OH, 1990, pp. 17-21
CHAPTER - 3 : BIBLIOGRAPHY
[1] Torralba JM, da Costa CE, Velasco F. P/M aluminum matrix composites: an
overview. J Mater Process Technol 2003;133:203–6
204
[2] Zebarjad SM, Salladi SA. Dependency of physical and mechanical properties of
Mechanical alloyed Al–Al2O3 composite on milling time. Mater Des
2007;28:2113– 20.
[3] Wlodarczyk - Fligier A, Dobrazanski LA, Kremzer M, Adamiak M.
Manufacturing of aluminum matrix composite materials reinforced by Al2O3
particles. J Achi Mater Manuf Eng 2008;27:99–102.
[4] Prabhu B, Suryanarayana C, An L, Vaidyanathan R. Synthesis and
characterization of high volume fraction Al–Al2O3 nanocomposite powders by
high-energy milling. Mater Sci Eng A 2006;425:192–200.
[5] Lindroos VK, Talvitie MJ. Recent advances in metal matrix composites. J Mater
Process Technol 1995;53:273–84.
[6] Kaczmar JW, Pietrzak K, Wlosinski W. The production and application of metal
matrix composite materials. J Mater Process Technol 2000;106:58–67.
[7] Harrigan Jr WC. Commercial processing of metal matrix composites. Mater Sci
Eng A 1998;244:75–9.
[8] Chen XF, Baburai EG, Froes FH, Vassel A. Ti–6Al–4V/SiC composites by
Mechanical alloying and hot isostatic pressing. Proc Adv Part Mater Process
1997:185–92
[9] Urtiga Filho SL, Rodriguez R, Earthman JC, Lavernia EJ. Synthesis of diamond
reinforced Al–Mg nanocrystalline composite powder using ball milling. Mater
Sci Forum 2003;416–418:213–8.
[10] Groza JR. Sintering of nanocrystalline powders. Int J Powder Metallurgy
1999;35:59–66.
205
[11] Kang YC, Chan SL. Tensile properties of nanometric Al2O3 particulate
Reinforced aluminum matrix composites. Mater Chem Phys 2004;85: 438–43.
[12] Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci 2001;46:1184.
[13] Razavi Hesabi Z, Hafizpour HR, Simchi A. An investigation on the
compressibility of aluminum/nano-alumina composite powder prepared by
blending and mechanical milling. Mater Sci Eng A 2007;454:89–98.
[14] Park BG, Crosky AG, Hellier AK. Fracture toughness of microsphere Al2O3 Al
particulate metal matrix composites. Composites B 2008;39: 1270–9.
[15] Zebarjad SM, Sajjadi SA. Microstructure evaluation of Al–Al2O3 composite
produced by mechanical alloying method. Mater Des 2006;27:684–8.
[16] Razavi Hesabi Z, Simchi A, Seyed Reihani SM. Structural evolution during
Mechanical milling of nanometric and micrometric Al2O3 reinforced Al matrix
composites. Mater Sci Eng A 2006;428:159–68.
CHAPTER - 4 : BIBLIOGRAPHY
[1] Dmitrii Volkov-Bogorodsky, Anatolii Leontiev, Elias Aifantis, Eshelby’s inclusion
problem in the gradient theory of elasticity: Applications to composite materials,
International Journal of Engineering Science, Volume 49, Issue 12, December 2011,
Pages 1517-1525, Sergey Lurie,
[2] Xu Wang, Ernian Pan, Two-dimensional Eshelby’s problem for two imperfectly bonded
piezoelectric half-planes, International Journal of Solids and Structures, Volume 47,
Issue 1, 1 January 2010, Pages 148-160
[3] Wennan Zou, Qichang He, Mojia Huang, Quanshui Zheng, Eshelby's problem of non-
206
elliptical inclusions Journal of the Mechanics and Physics of Solids, Volume 58, Issue
3, March 2010, Pages 346-372.
CHAPTER - 5 : BIBLIOGRAPHY
[1] Boccaccini, A. R., Ponton, C. B., and Chawla, K. K. “Development and Healing of
Matrix Microcracks in Fibre Reinforced Glass Matrix Composites: Assessment by
Internal Friction,” Materials Science and Engineering, Vol. A241, 1998, pp. 141–
150.
CHAPTER - 6 : BIBLIOGRAPHY
[1] Wolfenden, A. and Kinzy, J. E., “Measurements of the Dynamic Young‟s Modulus
and Damping of a Chemical-Vapor Infiltrated SiC/SiC Composite,” Journal of
Materials Science Letters, Vol. 16, 1997, pp. 708–711.
[2] Wolfenden, A., “Measurement and Analysis of Elastic and Anelastic Properties of
Alumina and Silicon Carbide,” Journal of Materials Science, Vol. 32, 1997, pp.
2275–2282.
[3] Xu, Z. R., Chawla, K. K., Wolfenden, A., Neuman, A., Liggett, G. M., and Chawla,
N., “Thermal Cycling Induced Damage in Alumina Fiber/Magnesium Alloy
Composite,” Material Science & Engineering, A, Vol. A203, 1995, pp. 75–84.
[4] R.K. Everett, R.J. Arsenault, Metal Matrix Composites: Mechanisms and Properties,
Academic Press, Boston, 1991.
[5] D Tabor, „Future directions of research in adhesion and friction: status of
understanding‟, Tribology in the 80‟s, vol. 1, Cleveland, Ohio, 18_-21 April 1983,
National Aeronautics and Space Administration, pp. 119_/142, 1984.
207
[6] Zhang Z, Zhang J, Mai YW. Wear behaviour of SiCp-Al-Si composites. Wear
1994;176:231–237.
[7] Modi OP, Prasad BK, Yegnewaran AH, Vaidya ML. Dry sliding wear behaviour of
squeeze cast aluminium alloy-silicon carbide composites. Mater Sci Eng A
1992;151:235 –244.
[8] Jiang J-Q, Tan R-S, Ma A-B. Dry sliding wear behaviour of Al2O3 –Al composites
produced by centrifugal force infiltration. Mater Sci Technol 1996;12:483 –488
[9] Ma ZY, Liang YN, Zhang YZ, Lu YX, Bi J. Sliding wear behaviour of SiCp
reinforced 2024 Al alloy composites. Mater Sci Technol 1996;12:751 –756.
[10] Sahin Y. The mechanical and wear behaviour of metal matrix composites. Ph.D.
Thesis. UK: Aston University in Birmingham, 1994.
[11] Alpas AT, Zhang J. Wear transition in cast aluminium-silicon alloys reinforced with
SiC particles. Scr Met Mater 1992;26:505 –509
[12] Akbulut H, Durman M, Yilmaz F. Dry wear and friction properties of d-Al2O3
short fibre-reinforced Al–Si alloy. Wear 1998;215:170 –176.
[13] Skolianos S, Kattamis TZ. Tribological properties of SiCp reinforced Al–4.51Cu–
1.51Mg alloy composites. Mater Sci Eng A 1993;163:107 –112
[14] Sahin Y, Kok M, Celik H. Tool wear and surface roughness of Al2O3 reinforced
aluminium alloy composites. J Mater Process Technol 128(1–3):280–291.
[15] Sergio Bocchini, Hasmukh A. Patel, Alberto Frache, One-pot synthesis of
hexadecyl modified layered magnesium silicate and polyethylene based
nanocomposite preparation, Applied Clay Science, Available online 18 June 2013
[16] T.M. Payne, S.A. Dillich, Hardness and indentation fracture toughness of carbides
208
in implantation-modified carbide-metal composite surfaces, Surface and Coatings
Technology, Volume 35, Issues 3–4, November 1988, Pages 299-308
[17] Prasad BK, Jha AK, Modi OP, Das S, Yegneswaran AH. Abrasive wear
characteristics of Zn–37.2Al–2.5Cu–0.2 Mg alloy dispersed with SiC particles.
Mater Trans JIM 1995;36:1048 –1057.
[18] Prasad BK. Abrasive wear characteristics of a zinc based alloy and zinc alloy SiC
composite. Wear 1996;252(3–4):250 –263
[19] Prasad BK, Das S, Jha AK, Modi OP, Dasgupta R, Yegneswaran AH. Factors
controlling the abrasive wear response of a zinc-based alloys silicon carbide particle
composite. Composites 1997;28A:301 –308.
[20] Lee GY, Dharan CK, Ritchie RO. A physically-based abrasive wear model for
composite materials. Wear 2002;252(3–4):322 –331.
[21] Axen N, Jacobson S. A model for the abrasive wear resistance of multiphase
materials. Wear 1994;174:187 –199.
[22] M.Fired C., Horsfall I.,.Luxton S.D, and Young R.J., Mat. Technology group,
Royal Military College of Science, Swindon Wilts S+N68LA. England.
[23] H.Akbulut, M.Durman, F.Yilmaz, “Higher temperature Young‟s modul of
aluminium short fibre reinforced Al-Si MMCs produced by liquid infiltration”, Mat.
Sci. & Tech., 14,(2001).299-305
[24] I.Dutta, D.L.Bourell, “A theoretical and experimental study of Aluminum alloy
6061-SiC metal matrix composite to identify the operative mechanism for
accelerated aging.” Mater. Sci. and Eng, 112 (1989) 67-77
[25] Zener And Snoek-Koester Effects In The Pd/Pt/H System J. Phys. Colloques 48, C8-
209
269-C2-274 (1987).
[26] A.S. Nowick, B.S. Berry, The zener relaxation as a distribution of relaxation times,
Acta Metallurgica, Volume 10, Issue 4, April 1962, Pages 312-318
[27] A.V. GRANATO, K. LÜCKE The Vibrating String Model of Dislocation Damping,
Physical Acoustics, Volume 4, Part A, 1966, Pages 225-276
[28] Clarence Zener, Relaxation phenomena in metals, Physica, Volume 15, Issues 1–2,
April 1949, Pages 111-118
[29] Ke Liu, Hitoshi Takagi, Ryosuke Osugi, Zhimao Yang, Effect of lumen size on the
effective transverse thermal conductivity of unidirectional natural fiber composites,
Composites Science and Technology, Volume 72, Issue 5, 8 March 2012, Pages 633-
639
[30] Joseph E. Bishop, Vikram K. Kinra, Elastothermodynamic damping in laminated
composites, International Journal of Solids and Structures, Volume 34, Issue 9,
March 1997, Pages 1075-1092
[31] Bruzzi, M.S., McHugh, P.E., O‟Rourke, F., Linder, T., Micromechanical modelling
of the static and cyclic loading of an Al 2124-SiC MMC. Int. J. Plasticity 17 (2001.)
(4), 565–599.
[32] Chaboche, J.L., Kruch, S., Maire, J.F., Pottier, T.,. Towards a
micromechanics based inelastic and damage modeling of composites. Int. J.
Plasticity 17 (4), (2001) 411–439.
[33] S.B. Jamaludin, Z. Yusoff, K.R. Ahmad, Comparative Study of Corrosion
Behavior of AA2014/15 Vol%Al2O3p and AA2009/20 Vol% SiCw,
Portugaliae Electrochimica Acta 26 (2008) 291-301
210
[34] M C Chu and K Ando, A FRACTURE AND SEVERITY ANALYSIS OF
COMPOSITE CERAMICS, Fatigue & Fracture of Engineering Materials &
Structures ;Volume 16, Issue 3, pages 335–350, March 1993
[35] Shu, J.Y., Barlow, C.Y., Strain gradient effects on microscopic strain field in
a metal matrix composite. Int. J. Plasticity 16 (5), 2000.563–591.
[36] Wickowski, Z.,. Dual finite element methods in homogeniAltion for elastic-
plastic fibrous composite material. Int. J. Plasticity 16 (2), 2000, 199–221.
[37] O. Acher, S. Dubourg, A generalization of Snoek‟s law to erromagnetic films
and composites, CEA Le Ripault, BP16, 37260 Monts, France
[38] N Chawla, K.K Chawla, M Koopman, B Patel, C Coffin, J.I Eldridge,
Thermal-shock behavior of a Nicalon-fiber-reinforced hybrid glass-ceramic
composite Composites Science and Technology, Volume 61, Issue 13,
October 2001, Pages 1923-1930
[39] R.U. Vaidya, R. Venkatesh, K.K. Chawla, Thermal expansion of a PRD-166
fibre-reinforced glass-matrix composite Composites, Volume 25, Issue 4,
April 1994, Pages 308-313
[40] S. Skirl, M. Hoffman, K. Bowman, S. Wiederhorn, J. Rödel, Thermal
expansion behavior and macrostrain of Al2O3/Al composites with
interpenetrating networks, Acta Materialia, Volume 46, Issue 7, 10 April
1998, Pages 2493-2499
[41] Duosheng Xu, Suong V. Hoa, R. Ganesan, Buckling analysis of tri-axial
woven fabric composite structures. Part II: parametric study––uni-directional
211
loading Composite Structures, Volume 72, Issue 2, February 2006, Pages 236-
253
[42] Denoath, Ramnarayan, K. Pradeep, and Rohatgi: Jour. of Mat. Sci. Vol. 1024,
1981, pp.3026.
[43] Dellis E.J.Lavernia, J.Zhang, R.J.Perez “Damping behaviour and Mechanism in
Particulate reinforced Metal Matrix Composites Processed Using Spray Atomization
and Deposition” Key Engineering Materials Trans Tech Publications, Switzerland,
104-107(1995) 691-728.
[44] I.M. HUTCHINGS, S. WILSON, A.T. ALPAS, Wear of Aluminum-based
Composites, Comprehensive Composite Materials, Volume 3, 2000, Pages 501-519
[45] Clyne, T. and P. Withers, J, An Introduction to Metal Matrix Composites, in
Cambridge Solid State Science Series, E.A. Davis and I.M. Ward, Editors. 1995,
Cambridge University Press: New York. p. 334-340.
[46] Suh Wolfenden, A. and J.M. Wolla, Dynamic Mechanical Properties, in Metal
Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault,
Editors. 1991, Academic Press Inc: San Diego. p. 287-328.
[47] Nowick, A.S. and B.S. Berry, Anelastic relaxations in crystalline solids. 1997, New
Yord: Academy Press. 436-61.
[48] Granato, A. and K. Lücke, Theory of Mechanical Damping due to
Dislocations.Journal of Applied Physics, 1956. 27(6): p. 583-593
[49] Granato, A. and K. Lücke, Application of Dislocation Theory to Internal Friction
PHenomena at High Frequencies. Journal of Applied Physics, 1956. 27(6): p.789-
805.
212
[50] Ke, T.S., Experimental Evidence of the Viscous Behavior of Grain Boundaries in
Metals. Phys. Rev., 1947. 71: p. 533-546.
[51] Bowles, R. R., Macini, D. L. and Toaz, M. W. In Advanced Composites-The Latest
Developments (Eds P. Beardmore and C. F. Johnson), Proceedings of the Second
Conference on Advanced Composites, Michigan, 1990, p. 21 (American Society for
Testing and Materials, Philadelphia, Pennsylvania).
[52] B.S. Shabel, D.S. Granger, U. Truckner, Friction and wear of Al_/Si alloys, in: ASM
Handbook, vol. 18, ASM International, 1992, pp. 785-794.
[53] Lansdown and Price D Tabor, „Future directions of research in adhesion and friction:
status of understanding‟, Tribology in the 80‟s, vol. 1, Cleveland,