chap 01 marlin 2013
DESCRIPTION
Presentation from MarlinTRANSCRIPT
![Page 1: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/1.jpg)
Process Control: Designing Process and Control Systems for Dynamic Performance
Chapter 1. Introduction to Process Control
Copyright © Thomas Marlin 2013The copyright holder provides a royalty-free license for use of this material at non-profit
educational institutions
![Page 2: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/2.jpg)
CHAPTER 1 : INTRODUCTION TO PROCESS CONTROL
When I complete this chapter, I want to be able to do the following.
• Explain the feedback concept applied to control
• Explain and identify the three elements in a feedback loop
• Be able to apply feedback manually to many chemical process examples
![Page 3: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/3.jpg)
CHAPTER 1 : INTRODUCTION TO PROCESS CONTROL
Outline of the lesson.
• Why Process Control and Why Now?
• Basic Questions about Control- What does a feedback system do?- Why is control necessary?- Why is control possible?- Where is control done?- How is control documented?
• Workshop
• Self-Study Guides
![Page 4: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/4.jpg)
• When I run a kinetics experiment, how do I maintain the temperature and level at desired values?
• How do I manufacture products with consistently high quality when raw material properties change?
• How much time do I have to respond to a dangerous situation?
WHY HAVE A PROCESS CONTROL COURSE?
Every engineer needs basic knowledge about control. Many exciting career opportunities exist for a
technical specialist.
![Page 5: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/5.jpg)
• We started with steady-state analysis because it is easier and important.
• We are building expertise in fundamentals (fluids, heat transfer, thermo, etc.) and process units (distillation, CSTR, etc.). Now we have examples that need control!
• We need to master control before integrating our knowledge in process design?
WHY NOW FOR THE CONTROL COURSE?
It’s a perfect time to learn how to “drive” the chemicalprocess. With this insight, we will be able to design plants
that can be controlled safely and produce high quality products.
![Page 6: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/6.jpg)
WHAT DOES A FEEDBACK SYSTEM DO?
Let’s look at a few examples first. Then, we will develop a general concept.
• Describe your method for driving a car.
• Could you drive a car without looking out the windshield?
• What must be provided by the car designer?
• Can a “good design” eliminate the need to steer?
![Page 7: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/7.jpg)
WHAT DOES A FEEDBACK SYSTEM DO?
Let’s look at a few examples first. Then, we will develop a general concept.
• Describe how home heating works.
• Describe the dynamic behavior of T.
• What must be provided by the house designer?
• Can a “good design” eliminate the need to change the heating?
![Page 8: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/8.jpg)
WHAT DOES A FEEDBACK SYSTEM DO?
Why does the temperature cycle?
Is this good enough for all variables in a chemical process? Hint: if “yes”, the course is over!
![Page 9: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/9.jpg)
WHAT DOES A FEEDBACK SYSTEM DO?
The control systems appear to have three basic elements.
PROCESS
Inputs Outputs
FINALELEMENT
CONTROLLER
SENSOR
Desired value
![Page 10: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/10.jpg)
PROCESS
Inputs Outputs
FINALELEMENT
CONTROLLER
SENSOR
Desired value
WHAT DOES A FEEDBACK SYSTEM DO?
What is a typical “final element” for chemical processes?
How do we select the sensorlocation?
What is the meaning of the arrows?
![Page 11: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/11.jpg)
PROCESS
Inputs Outputs
FINALELEMENT
CONTROLLER
SENSOR
Desired value
WHAT DOES A FEEDBACK SYSTEM DO?
FEEDBACK CONTROL makes use of an output of a system to influence an input to the same system.
CONTROL (verb): To maintain desired conditions in a physical system by adjusting selected variables in the system.
input = cause output = effect
![Page 12: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/12.jpg)
WHAT DOES A FEEDBACK SYSTEM DO?
Caution: Common misunderstanding in terminology!
Common vernacular
Negative feedback: “You are an idiot!
Positive feedback: That was a good idea. Thank you!
Engineering & Science
Positive feedback: Action to increase the error from desired.
Negative feedback: Action to reduce the error from desired.
Good!
![Page 13: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/13.jpg)
WHY IS CONTROL NECESSARY?
T
A
CB
v1
v2
One word: DISTURBANCES! Give some examples in the CSTR in the figure.
We want to achieve the following:1. Safety2. Environmental Protect.3. Equipment protect.4. Smooth operation5. Product quality6. Profit7. Monitoring and diagnosis
Chapter 2
![Page 14: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/14.jpg)
WHY IS CONTROL NECESSARY?
One word: DISTURBANCES!
Give some examples in the distillation
tower in the figure.
FR
FV
xB
xD
![Page 15: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/15.jpg)
WHY IS CONTROL POSSIBLE?
T
A
CB
v1
v2
Control is possible only if the engineer provides the required equipment during process design.
Part 1: Control equipment
Final element
Final element
Sensors Computing and interface for person
Communication
![Page 16: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/16.jpg)
WHY IS CONTROL POSSIBLE?
Control is possible only if the engineer provides the required equipment during process design.
Part 2: Process equipment
How do we determine the heat transfer area?
T
A
CB
v1
v2
How do we determine the reactor volume?
![Page 17: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/17.jpg)
WHERE IS CONTROL DONE?
Sensors, local indicators, and valves in the process
Displays of variables, calculations, and commands to valves are in the centralized control center.
Shows an older-style control panel
![Page 18: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/18.jpg)
Creative Commons License, see http://en.wikipedia.org/wiki/File:Nuclear_Ship_Savannah_-_Reactor_Control_Room_-_Center_and_Left_Panels.jpg
WHERE IS CONTROL DONE?
![Page 19: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/19.jpg)
WHERE IS CONTROL DONE?
Sensors, local indicators, and valves in the process
Displays of variables, calculations, and commands to valves are in the centralized control center.
Shows a modern, computer-based control panel
Central control room
![Page 20: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/20.jpg)
WHERE IS CONTROL DONE?
Photo courtesy of Worsley Alumina and Honeywell
![Page 21: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/21.jpg)
HOW IS CONTROL DESIGN DOCUMENTED?
LC
FC
TC
A
Piping and instrumentation (P&I) drawings provide documentation.
• The system is too complex to describe in text.
• We must use standard symbols.
F = flow
L = level
P = pressure
T = temperature
…..
![Page 22: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/22.jpg)
CHAPTER 1: INTRODUCTION - WORKSHOP 1
You are implementing control “manually”.
a. Explain the principle for a typical flow sensor
b. Explain how the final element affects the controlled variable.
c. Explain the correct action if you want to increase the controlled variable
pump valve
sensor
Flow Control
![Page 23: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/23.jpg)
CHAPTER 1: INTRODUCTION - WORKSHOP 2
You are implementing control “manually”.
a. Explain the principle for a typical liquid level sensor
b. Explain how the final element affects the controlled variable.
c. Explain the correct action if you want to increase the controlled variable
Level Control
pump valve
sensor
![Page 24: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/24.jpg)
CHAPTER 1: INTRODUCTION - WORKSHOP 3
You are selling a gas to a customer based on the volumetric flow at standard conditions. You decide to use an orifice meter to measure the flow rate.
You have learned that the gas flow density may change by -10% from its design (expected) value. What do you do?
compressor valve
Orifice meter
CustomerOurplant
![Page 25: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/25.jpg)
CHAPTER 1: INTRODUCTION - WORKSHOP 4
The next page contains a Piping and Instrumentation drawing (P&ID) for a solvent storage tank. First, refer to the following references.
•Marlin (200) Appendix A•Sample chapter of Design textbook by Turton et.al. http://www.pearson.ch/download/media/9780130647924.pdf
Answer the following questions.
•Determine the flow of fluid in and out of the process•Find examples of measurements displayed locally, in a local control room and a centralized control room. Evaluate these choices.•Identify different types of signal transmission.•Identify different kinds of valves and evaluate the choices.•Identify examples of safety and equipment protection.•Suggest additions to improve this design.
![Page 26: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/26.jpg)
CHAPTER 1: INTRODUCTION - WORKSHOP 4
Source: Tony R. Kuphaldt, CC License, http://www.openbookproject.net/books/socratic/sinst/output/realistic_diagrams.pdf
![Page 27: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/27.jpg)
CHAPTER 1 : INTRO. TO PROCESS CONTROL
How are we doing?
• Explain the feedback concept applied to control
• Explain and identify the three elements in a feedback loop
• Be able to apply feedback manually to many chemical process examples
Lot’s of improvement, but we need some more study!• Read the textbook• Review the notes, especially learning goals and workshop• Try out the self-study suggestions• Naturally, we’ll have an assignment!
![Page 28: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/28.jpg)
CHAPTER 1: LEARNING RESOURCES
• SITE PC-EDUCATION WEB
- Instrumentation Notes
- Interactive Learning Module (Chapter 1)
- Tutorials (Chapter 1/2)
• Textbook Appendix A on drawing symbols
- See references for much more detail or symbols
- See following general reference book by Tony R. Kuphaldt on instrumentation and control
http://www.openbookproject.net/books/socratic/sinst/
www.pc-education.mcmaster.ca/
![Page 29: Chap 01 Marlin 2013](https://reader036.vdocuments.us/reader036/viewer/2022081418/55cf92ca550346f57b998706/html5/thumbnails/29.jpg)
CHAPTER 1: SUGGESTIONS FOR SELF-STUDY
1. Write down the rules (algorithm) that you use when you drive an automobile or bicycle.
2. Formulate questions with answers and trade with members of your study group.
3. Find a P&I drawing in one of the textbook references (or recent volume of Chemical Engineering Progress), explain the strategy, and prepare questions for your instructor on aspects that you do not understand.
4. Find examples of control systems in your house. (Hint: look at the heating, air conditioning, toilet tank, and the most highly automated room, the kitchen.)