DPGW-4.5-PE-WCS-01 F06

Change Request No. Delphi (old) part number

Date Part change level number (old REV)

Supplier name Delphi (new) part number

Supplier manufacturing location Part change level number (new REV)

Supplier change contact Customer part number

Phone number Drawing number

Email adress DWG change level number (new REV)

OEM initiated change (yes/no) Drawing date

Affected OEM Part name

Resp. Component Engineer: Change Description

Customer receiving locations Affected Carline

CHANGE DESCRIPTION

Affects:Production ProcessManufacturing LocationPoint of PurchaseTool (Capa, Replacement)MaterialSub- supplierPackagingDrawing / DimensionsSupply ConditionFunctionDesignOther

Change compatible with previous revision level of mating parts ?

Tooling:

Disposition Stock:

IMPLEMENTATION PLANNING INFORMATION

Implementation date after release of PPAP and customer order of new part numbersOEM approval date FIAT approved design change on 28th September 2018Sample date Week 50/2018PPAP date Week 50/2018First shipment date Week 03/2019 (stock of old design level will be used before new design is delivered)

Date Signature

Customer FeedbackComments:

Name Phone E-mail

Purchasing

Supplier Quality Development

Customer Service Center

Operations

NOTE: 11/19/2012 Revision 01DPGP-4.5-PE-WCS. 01 F06

N/A

01

01

Customer (FIAT) requested this connector family to be reinforced to improve resistance during mating operation.

Receptacle Housing 32 way:-Black cover + lever: PN 35151230 was 33289001

35151230APTIV S&P MOBILITY SERVICES SPAIN, S.L.

10/18/2018

10/23/2018

Detailed description of change

CHANGE NOTICE

Further information

Reason for change

TTI (Germany)Power & Signal (US)

PROCESS AND COMPONENT INFORMATION33289001

FIAT

+34 948179223

inaki.loperena@aptiv.com

yes

CR-17/12074

Iñaki Loperena

Pamplona (Spain)

Immediate Change Running Change

Signature & Date

N/A

15471044

12

Tomasz Tecza

Receptacle Housing 32W for DSQ 1.5; DSQ 2.8; Usealed

Design improvement to make connector more robust

Detailed desription of impact of the change according to the indicated affects

This design change consists on making bigger and stronger pins in black cover and adding ribs to lever in order to reinforce these elements, which withstand the forces during mating operation.

Yes No

use scrap

Additional Revised

October 2018 CS Pamplona

32W BCM FEMALE CONNECTOR COVER

DESIGN CHANGE IMPROVEMENT

32 ways BCM Connector Robust Design Improvement

Cover Color

15471031 Black

PERMANENT MODIFICATIONNo new part number

Cover 180o

1. Design change in cover 180o

Make bigger and stronger key on cover’s pin to reinforce its cutting by the lever during connector mating operation.

2.2 mm(as the green version

13894855)Adding 1 mm about

ComparisonCurrent status Modification

PERMANENT MODIFICATION

Cover 180o

2. Design change in cover 180ºAdd additional ring 0.1mm height.

Current status Modification

Material added(0.1 mm height)

PERMANENT MODIFICATION

PN Colour

Old lever 33288996 White

New lever 35151120 Grey

PERMANENT MODIFICATIONPart number is changing

32 ways BCM Connector Robust Design Improvement

Lever1. Design change in leverChange saver area by adding to ribs to receive stiffer guiding slot – cam area.

PERMANENT MODIFICATION

Current status Modification

Place for ejector

Lever2. Design change in leverAdd ramp (0.15mm height) on the lever’s groove for closer holding lever to the cover

during the mating.

PERMANENT MODIFICATION

Current status Modification

Lever3. Design change in leverAdd ribs to reinforce the lever.

PERMANENT MODIFICATION

Current status Modification proposal

1.5 x 1.3 mm

Assemblies (cover + lever) PERMANENT MODIFICATION

Assembly New PN Old PNBlack cover + lever 35151230 33289001Green cover + lever 35151821 13894856