champion fasteners 2018 book webchampionpartsonline.com.au/documents/champion... · ca2085 trim...

ASSORTMENT CATALOGUE2018||||||||||||||||||||

THE COMPLETE RANGE

www.championparts.com.au

Champion Parts Pty. Ltd.HEAD OFFICE, VICTORIA

205 Arden Street, North Melbourne PO Box 22, North Melbourne

VIC 3051 Australia VIC 3051 Australia

Tel: (03) 9325 9090 Email: [email protected]

Fax: (03) 9329 2452 www.championparts.com.au

Contact Champion for further product information and your nearest supplier

A.B.N. 86 004 661 232 A.C.N. 004 661 232

OUR COMMITMENT TO QUALITY.The Champion Assortment range is the most comprehensive range of its type assembled in Australia. The range has been designed with the specific requirements of the professional Automotive, and Engineering Workshop in mind. The result is that you get what you need, in the right quantity, in the right quality, and most importantly, at the right price.

The packages are tough, convenient, replenishable and re-useable.Each Assortment product type is labeled with the Replacement-Pack part number for ease of replenishment.

Champion Parts is committed to quality throughout all facets of the Organisation.

50

CHAMPION ASSORTMENT KITS | PREMIUM QUALITY IN REUSABLE CASES

ASSORTMENTS RED POLY CASE

• Contains the highest quality contents

• SmaIIer than Master Kits in a reusable poIy box

• Sometimes referred to as a ‘Grab Kit’

• FuII replacement stock available

ASSORTMENTS BLUE POLY CASE

• High quality Stainless SteeI incIuding marine grade

• SmaIIer than Master Kits in a reusable poIy box

• Sometimes referred to as a ‘Grab Kit’


• Premium storage system in reusable metaI cases

• Contains the highest quality contents


REPLACEMENT PACKS• Replacement Packs are to refiII Master Kits and Assortments

• The same high quality content as the original Assortments

• Cross reference provided on the inside Iid of each kit to

identify contents and Replacement Pack part numbers

CHAMPION ASSORTMENTS

MASTER KITS RED STEEL CASE

1

REFILLS FOR ASSORTMENTS & MASTER KITS

VALUE FOR MONEYNo need to replace your kit, just replace the stock you have run out of.

EASY TO REPLACE USED STOCK

• The relevant replacement pack part number

of the Assortment.

• Available individually or in standard packs

• Maximum discount applies only to standard outer packs.

• Replacement packs are available for the majority of Champion and similar assortments.

• of assortments.

To maintain quality always replace components in Champion Assortments with Genuine Champion Replacement Packs.2

PREMIUM QUALITY STORAGE SYSTEMS

Storage cabinets are not supplied with assortments

3

4 DRAWER METAL CABINETCSD4

• Sturdy metal cabinet complete with roll out trays • Attractively powder coated in red to complement the master kits • Dimensions: 305H x 410W x 3200(mm)

6 DRAWER METAL CABINETCSD6

• Sturdy metal cabinet complete with roll out trays • Attractively powder coated in red to complement the master kits • Dimensions: 430H x 410W x 3200(mm)

MASTER ASSORTMENT DISPLAY STAND (4)CDS10

• Designed to hold four Master Kits • Black powder coated • Sturdy metal frame • Ideal workshop accessory• Merchandiser dimensions: 405H x 185W x 4000(mm)

Champion Master Kit Cabinets are available in either 4 or 6 drawer capacity. These sturdy metal cabinets are complete with roll out trays. Attractively powder coated in red to complement the master kits.

10 TIER ASSORTMENT STANDCDS03

• Stand can be purchased empty or built with your selection of assortments • Free Standing or wall mounted• Dimensions: 685H x 190W x 2000(mm)

MASTER KITS

4

UNF BOLTS, SET SCREWS & NUTS

CA365

• Imperial• High Tensile • GR5 • Zinc Plated • 16 Sizes: 1/4" to 1/2" Dia • 365 Pieces

C365-1 to C365-21Replacement Packs:

UNC BOLTS, SET SCREWS & NUTS

CA370

• Imperial • High Tensile • GR5 • Zinc Plated • 16 Sizes: 1/4" to 1/2" Dia • 370 Pieces


BOLTS, SET SCREWS & NUTSCA431

• Metric • High Tensile • GR8.8 • Zinc Plated • 17 Sizes: M4 to M12 Dia • 431 Pieces



• Metric • ISO and Fine Pitch • High Tensile • GR8.8 • Zinc Plated • 17 Sizes: M4 to M12 Dia • 480 Pieces



• Metric • Flange Head Zinc Plated • High Tensile • GR8.8 • Zinc Plated • 17 Sizes: 5mm to 10mm Dia • 455 Pieces


SELF-TAPPING SCREWSCA1630

• Metric • Phillips Raised Pan Slot and Hex Head incl. Cup Washers • Z/P • N/P • 19 Sizes: 3.5mm to 6.3mm • Lengths 13mm to 38mm • 1680 Pieces


SET SCREWS & NUTSCA1880

• Stainless Steel • Metric • GR 304/A2 • 17 Sizes: M4 to M12 Dia • 316 Pieces


FUSESCA2005

• Glass 2 to 50 Amp • Blade 5 to 30 Amp • European 8 to 25 Amp • 24 Sizes • 24 Types • 310 Pieces


CIRCLIPSCA2010

• Internal and Metric • 20 Sizes: 8mm to 50mm (Shaft Size) • 260 Pieces


MASTER KITS | PREMIUM STORAGE SYSTEMS IN REUSABLE METAL CASESMASTER KITS

5

CIRCLIPSCA2015

• External • Metric • 20 Sizes: 6mm to 50mm (Shaft Size) • 260 Pieces

2015-1 to C2015-20Replacement Packs:

ROLL PINSCA2020

• Metric • Large Sizes • 24 Sizes: 2mm to 10mm Dia • 360 Pieces

C2020-1 to 2020-24Replacement Packs:

ROLL PINSCA2025

• Imperial • 24 Sizes: 3/32" to 3/8" Dia • 364 Pieces


CIRCLIPSCA2030

• Internal • Imperial • 20 Sizes: 1/4" to 2" (Bore Size) • 240 Pieces


CIRCLIPSCA2035

• External • Imperial • 20 Sizes: 1/4" to 2" (Shaft Size) • 240 Pieces


WIRING TERMINALSCA2040

• Crimp Type incl. Push-On Bullet Ring • Tab • Splice & Lanced • 28 Types • 410 Pieces



• Metric • Pan and Mushroom Head • Phillips Drive • Black Zinc • 28 Sizes: 3.2mm to 5.5mm • Lengths: up to 50mm • 830 Pieces

C1200-1 to 14 & C1720-1 to 14

Replacement Packs:

FLAT & SPRING STEEL WASHERS

CA2050

• Imperial and Metric • Zinc Plated • 25 Sizes: 5/32" to 3/4" & 6mm to 20mm ID • 1628 Pieces

C756-1 to 12 & C648-1 to 6Replacement Packs:

DRAIN ( SUMP ) PLUG ASSORTMENT (M)

CA2058

• Drain ( SUMP ) Plugs • Metric and Imperial• UNC, UNF & BSP • Metric 1.25mm, 1.5mm and 1.75mm Threads • 20 Sizes • 92 Pieces

Available See Inside Kit Lid For Replacement Numbers

Replacement Packs:

MASTER KITS

6

FIBRE WASHERSCA2060

• Metric & Imperial • 36 sizes: 1/8" to 1" & 14mm to 30mm ID • Thickness: 1/32", 1/16", 3/32", 2.4mm • 978 Pieces

C400-1 to 14 & C390-1 to 12 & C150-1 to 11

Replacement Packs:

BRASS HOSE FITTINGSCA2070

• ‘T’ Pieces Joiners Tails Elbows and Adaptors • 53 Sizes • 106 Pieces

Replacement Packs:

VACUUM HOSE & TUBE CONNECTORS

CA2075

• 48 Sizes • 134 Pieces

Replacement Packs:

TRIM CLIPSCA2080

• Scrivets • 16 Types • 650 Pieces

Replacement Packs:

TRIM CLIPSCA2085

• Xmas Tree Clips • 16 Types • 690 Pieces

Replacement Packs:

MANIFOLD STUDS & NUTSCA2096

• Metric & Imperial • Steel and Brass • Zinc Passivated • 19 Sizes • 200 Pieces

Replacement Packs:

DRAIN (SUMP) PLUG WASHERS

CA2140

• Metric • Fibre, Aluminium and Copper Crush • 25 Sizes: 12mm to 25mm ID • 1015 Pieces

Replacement Packs:

BONDED SEAL (DOWTY) WASHERS

CA2173

• Metric and Imperial • 22 Sizes: 8mm to 42mm & 1/8" to 1-1/4" ID BSP • 173 Pieces


RUBBER GROMMETSCA2174

• Wiring and Blanking • 20 Sizes: Metric 8mm to 28mm (Panel Hole Size) • 174 Pieces



7

WOODRUFF KEYSCA2177

• Imperial and Metric • 34 Sizes: 3/32" to 3/8" & 2mm to 10mm Dia • 341 Pieces


6mm BOLTS & NUTSCA2206

• Self-Locking Nuts & Washers • High Tensile • GR8.8 • Z/P • Hex Set Screws & Flange Head Lengths: 16mm to 40mm • 781 Pieces • 21 Sizes

Replacement Packs:


• Self-Locking Nuts & Washers • High Tensile • GR8.8 • Z/P • Hex Set Screws & Flange Head, Lengths: 20 to 50mm • 21 Sizes • 520 Pieces

Replacement Packs:


•Self-Locking Nuts & Washers • High Tensile • GR8.8 • Z/P • Hex Set Screws & Flange Head, Lengths: 25mm to 50mm • 401 Pieces

Replacement Packs:

FLAT & BODY STEEL WASHERS

CA2240

• Imperial and Metric • Zinc Plated • 20 Sizes: 1/8" to 1" & 6mm to 12mm ID • 2190 Pieces

Replacement Packs:

FUEL INJECTION COPPER WASHERS

CA2260

• Metric • 24 Sizes: 5mm to 26mm ID • Thickness: 1, 1.5 & 2mm • 565 Pieces

Replacement Packs:

TRIM CLIPS & SCREW GROMMETS

CA2265

• Plastic • 24 Sizes • 245 Pieces

Replacement Packs:

SHIM STEEL WASHERSCA2276

• Imperial • 36 Sizes: 3/16" to 1-3/8" ID • 006" Thickness • 460 Pieces

Replacement Packs:

SOCKET HEAD CAP SCREWSCA2300

• Imperial • BSW • High Tensile GR5 • 25 Sizes: 3/16" x 5/8" to 1/2" x 2-1/4" • 300 Pieces

Replacement Packs:

MASTER KITS

8

BOLTS. SET SCREWS & NUTSCA2370

• Imperial • UNC • High Tensile • GR8 • 22 Sizes: 1/4" to 1/2" Dia • Lengths: 3/4" to 2" • 393 Pieces


FUSESCA2385

• Blade Circuit Breaker Micro and Mini Blades • 3 Amp to 30 Amp • 33 Types • 425 Pieces

Replacement Packs:

GREASE NIPPLESCA2415

• Imperial and Metric • Zinc Plated • 20 Sizes • 415 Pieces

Replacement Packs:


• Metric • GR8.8 • Zinc Plated • 24 Sizes: 3mm to 8mm Dia • 430 Pieces

Replacement Packs:

BOLTS. SET SCREWS & NUTSCA2431

• Metric • High Tensile GR10.9 • Zinc Plated• 6mm to 12mm Dia • Lengths: 20mm to 50mm • 20 Sizes • 364 Pieces

Replacement Packs:

DRAIN ( SUMP ) PLUG & SEALS ASSORTMENT ( M )

CA2436

• Drain (SUMP) Plugs and Seals • Metric • 8 sizes of Plugs • 12 sizes of seals • (Fibre, Aluminium & Rubber) • 438 Pieces

Available See Inside Kit Lid For Replacemnt Numbers

Replacement Packs:

SPLIT PINSCA2540

• Metric • Steel • Zinc Plated • 16 Sizes: 1.6 x 22mm to 6.3 x 50mm • 1540 Pieces

Replacement Packs:


• Crimp Type incl Adjustable Ratchet Crimp Tool • Suitable for 3mm 4mm & 5mm Wire • 700 pieces • 20 Types

Replacement Packs:

MACHINE SCREWSCA2705

• Metric • Pan Head • Phillips • Zinc Plated • 24 Sizes: M3 to M6 Dia • 1785 Pieces

Replacement Packs:


9

MACHINE SCREWS & NUTSCA2710

• Metric • Countersunk Head • Phillips • Zinc Plated • 20 Sizes: M3 to M6 Dia • 1650 Pieces

Replacement Packs:

SEMS ASSEMBLYCA2715

• Metric • Single and Double Washers • Zinc Passivated • 20 Sizes: M5 to M10 Dia • 380 Pieces

Replacement Packs:

NYLON BOLTS & NUTSCA2788

• Metric • Hex Head • 22 Sizes: 5mm, 6mm & 8mm Dia • 565 Pieces


NYLON INSERT SELF-LOCKING NUTS

CA2790

• Metric & Imperial • Nylon Insert Self-Locking Nuts • UNC & UNF 3/16" to 1/2" • 4mm to 12mm • 20 Sizes • 248 Pieces

C126-1 to C126-12 & C300-8 to C300-12 & C270-6, 10 and18

Replacement Packs:

METRIC CIRCLIPS INTERNAL - PROFESSIONAL

CA5010

• Circlips Internal Metric • 20 Sizes • 8mm to 50mm • Includes Circlip Plier • 851 Pieces

D1300-8 to D1300-50Replacement Packs:

METRIC CIRCLIPSEXTERNAL - PROFESSIONAL

CA5015

• Circlips External Metric • 20 Sizes • 6mm to 50mm • Includes Circlip Plier • 926 Pieces

D1400-6 to D1400-50Replacement Packs:

IMPERIAL CIRCLIPS - INTERNAL - PROFESSIONAL

CA5030

• Circlips Internal Imperial • 20 Sizes • 1/4" to 2" • Includes Circlip Plier • 876 Pieces

N1300-4 to N1300-32Replacement Packs:

IMPERIAL CIRCLIPS - EXTERNAL - PROFESSIONAL

CA5035

• Circlips External Imperial • 20 Sizes. 1/4" to 2" • Includes Circlip Plier • 876 Pieces

N1400-4 to N1400-32Replacement Packs:

WIRING CONNECTOR BLOCK ASSORTMENT (M)

CA5240

• Wiring Blocks and Spade Terminals • 20 Sizes • 496 Pieces

274, C240-1 to C240-10, C5240-1 & C5240-2

Replacement Packs:

MASTER KITS

10

HIGH TENSILE - SOCKET HEAD CAP SCREWS - METRIC

CA5417

• High Tensile Grade 8.8 • Socket Head Cap Screws • Metric • Zinc Plated • Includes 2 sets of Allen Keys • 38 Sizes • M3 to M10 Dia • Lengths 10mm to 50mm • 782 Pieces


Replacement Packs:

HIGH TENSILE SOCKET HEAD CAP SCREWS

CA5418

• High Tensile Grade 5 • Socket Head Cap Screws • Imperial • Zinc Plated • Includes 2 sets of Allen Keys • 28 Sizes 3/16" to 3/8" Dia • Lengths 1/4" to 2" • 491 Pieces


Replacement Packs:

RYCO HOSE CLAMP ASSORTMENT

CHCA120

• 6mm Min Hose to Max Hose 16mm • 40mm Min Hose to Max Hose 64mm • 9 Sizes • 120 Pieces

RY4, RY6, RY08, RY10, RY12, RY20, RY24, RY28 & RY32

Replacement Packs:

CHAMPION THREAD TESTER 48 SIZES

CTT48

Metric and Imperial UNC & UNF • Nut and Screw Thread Tester • IMP 3/16 to 1/2 UNF & UNC • Metric Course Pitch M4 to M12 ISO • Metric Fine & Extra Fine M10 & M12 • 48 Sizes

12 PIECE THREAD REPAIR KITS

METRIC THREAD REPAIR KITS

PART No. SIZE

CTRK508 5mm x 0.8mm

CTRK6100 6mm x 1.00mm

CTRK8125 8mm x 1.25mm

CTRK10150 10mm x 1.50mm

CTRK10125 10mm x 1.25mm

CTRK12125 12mm x 1.25mm

CTRK14125 14mm x 1.25mm

CTRK16150 M16 x 1.5mm

IMPERIAL THREAD REPAIR KITS

PART No. SIZE

CTRK3NC 3/16" UNC

CTRK4NC 1/4" UNC

CTRK5NC 5/16" UNC

CTRK6NC 3/8" UNC

CTRK3NF 3/16" UNF

CTRK4NF 1/4" UNF

CTRK5NF 5/16" UNF

CTRK6NF 3/8" UNF

12 PIECE METRIC & IMPERIAL THREAD REPAIR KITS

• Tap, Drill, Installation Tool, Thread Inserts, Break-off Tool.• Insert Sizes: M5 x 0.8, M6 x 1.00, M8 x 1.25, M10 x 1.50, M12 x 1.75 • Inserts suitable for all applications• Made from high quality Stainless Steel• Interchangeable with other brands• 12 Pieces (varying lengths)

METRIC THREAD REPAIR SETCTRKMET-5

Imperial and Metric Thread Repair Kits include: Tap, Drill Bit, Installation Tool, Break-off Tool and Thread Inserts. Stainless Steel. 12 Pieces (varying lengths).

MASTER KITS

11

ASSORTMENTS

LYNCH PIN ASSORTMENTCA18

• Metric • Lynch Pins • 5mm to 10mm • 8 Sizes • 18 Pieces

CLP1 to CLP4Replacement Packs:


• Metric Pan Head Phillips Zinc Plated • 16 Sizes: 3mm to 6mm x 10mm to 25mm Long • 520 Pieces


PIPE SUPPORT ANCHORSCA22

• Metal with Rubber Protector • 28 Pieces


BRASS SHIM ASSORTMENTCA31

• Shim Brass • 60mm Wide Rolls • 5 Sizes • 002" to .010" Thickness • TO AS.1566

N/AReplacement Packs:

BRASS SHIM ASSORTMENTCA32

• Shim Brass • 150mm x 150mm Sheets • 4 Sizes • .002" to .010" Thickness • TO AS.1566


STEEL SHIM ASSORTMENTCA33

• Shim Steel • 60mm Wide Rolls • 4 Sizes • .002" to .010" Thickness • TO AS.1365


STEEL SHIM ASSORTMENTCA34

• Shim Steel • 150mm x 150mm Sheets • 4 Sizes • .002" to .010" Thickness • TO AS.1365


STAINLESS STEEL SHIM ASSORTMENT

CA36

• Stainless Steel Shim • 150mm x 150mm Sheets • 4 Sizes • .003" to .027" Thickness • TO AS.1449


EXPANSION PLUGSCA38

• Cup Type Steel Imperial Zinc Plated • 13 Sizes: 19/32" to 2-1/16" • 52 Pieces


• Tap, Drill, Installation Tool, Thread Inserts, Break-off Tool.• Insert Sizes: M5 x 0.8, M6 x 1.00, M8 x 1.25, M10 x 1.50, M12 x 1.75 • Inserts suitable for all applications• Made from high quality Stainless Steel• Interchangeable with other brands• 12 Pieces (varying lengths)

ASSORTMENTS

12

EXPANSION PLUGSCA42

• Cup Type Brass Imperial • 10 Sizes: 3/4" to 2-1/16" • 35 Pieces

Replacement Packs:

EXPANSION PLUGSCA43

• Cup Type Brass Metric • 12 Sizes: 20mm to 50mm • 42 Pieces


CLEVIS PINSCA52

• Imperial Zinc Plated • 9 Sizes: 1/4" to 7/16" Dia • 52 Pieces


DRAIN (SUMP) PLUGS STEELCA58

• Metric and Imperial Zinc Plated • 11 Sizes • incl 10 "O-rings" • 58 Pieces

Replacement Packs not available

Replacement Packs:

DRAIN ( SUMP ) PLUG ASSORTMENT

CA60

• Drain (SUMP) Plugs • Metric 12 to 25mm Dia. • Thread Pitch 1.5 and 1.75 • 38 Pieces

DP02 to DP88Replacement Packs:

WIRING GROMMETSCA63

• Metric • Rubber • 12 Sizes: 3mm to 23mm (Wire Hole Size) • 83 Pieces


BRASS FITTINGSCA70

• Adaptors Tails Elbows Nuts Joiners and Connectors • 20 Types • 59 Pieces


Replacement Packs:

MULTI HOLE CLEVIS PINSCA72

• Imperial Zinc Plated • 12 Sizes: 3/16" to 1/2" Dia • 72 Pieces


BLANKING GROMMETSCA90

• Metric • Rubber • 8 Sizes: 8mm to 28mm (Panel Hole Size) • 91 Pieces



13

BRASS MANIFOLD NUTSCA95

• UNC UNF BSF Metric Fine and Coarse Pitch • 17 Sizes • 83 Pieces


MANIFOLD STUDS & NUTSCA96

• Metric and UNC Steel Studs and Nuts Zinc Passivated • 10 Sizes • 80 Pieces


EXPANSION PLUGS STEELCA98

• Disc/Lens Type Zinc Plated Imperial • 16 Sizes: 3/4" to 2" • 100 Pieces


FLANGE NUTSCA100

• Zinc Plated • 8 Sizes: 5mm to 12mm incl M10 to M12 Fine Pitch • 140 Pieces


EXTENSION SPRINGSCA101

• Metric • Plain Finish • 12 Sizes: Lengths 25mm to 120mm and 5mm to 12mm Dia • 48 Pieces


COMPRESSION SPRINGSCA102

• Plain Finish • Metric • 12 Sizes: Lengths 37mm to 100mm and 5mm to 20mm Dia • 72 Pieces


ACCELERATOR SPRINGSCA103

• Plain Finish • Metric • 9 Sizes: Lengths 115mm to 275mm and 5mm to 11mm Dia • 72 Pieces


FUSESCA105

• Glass Blade and European • 100 Pieces • 14 Sizes: Glass 3-35 Amp • Blade 10-20 Amp • European 8-25 Amp


WHEEL ALIGNMENT SHIMSCA106

• Imperial • Suitable for GM and Ford Vehicles • 12 Sizes: 4 Types in 1/32" 1/16" & 1/8" Thickness • 131 Pieces


ASSORTMENTS

14

WHEEL ALIGNMENT SHIMSCA107

• Metric • 11 Sizes: 1mm 1.5mm 2mm & 3mm Thickness • 100 Pieces


GREASE NIPPLESCA108

• Straight and Angle Nipples UNF BSF BSP and NPT Threads • 15 Sizes • 113 Pieces


GREASE NIPPLESCA109

• Straight and Angle Nipples Metric Fine and Coarse • 12 Sizes: 6mm to 10mm Dia • 105 Pieces


FUSESCA110

• AF Blade • 8 Sizes: 3, 5, 7.5, 10, 15, 20, 25, & 30 Amp • 110 Pieces


FUSESCA111

• 8 Sizes: 3, 5, 7.5, 10, 15, 20, 25 & 30 Amp • 120 Pieces


FUSESCA112

• Mini Blade • 8 Sizes: 3, 5, 7.5, 10, 15, 20, 25, & 30 Amp • 120 Pieces


FUSESCA113

• AF Circuit Breaker • 7 Sizes: 5, 7.5, 10, 15, 20, 25, 30 Amp • 35 Pieces


O’ RINGSCA115

• Imperial Nitrile 70 Shore • 14 Sizes: 3/16" to 1" ID • 115 Pieces


O’ RINGSCA116

• Metric Nitrile 70 Shore • 15 Sizes: 5mm to 25mm ID • 130 Pieces



15

O’ RINGSCA118

• High Temp and High Pressure Viton Imperial 75 Shore • 12 Sizes: 7/32" to 1" • 110 Pieces


UNF SET SCREWS & NUTSCA120

• High Tensile Imperial GR5 Zinc Plated • 11 Sizes: 1/4" to 3/8" Dia • 113 Pieces


P’ CLAMPS & CABLE TIE MOUNTS

CA124

• Nylon Cable ‘P’ Clamps and Cable Tie Mounts • 124 Pieces


UNC SET SCREWS & NUTSCA125

• Imperial • High Tensile GR5 Zinc Plated • 14 Sizes: 1/4" to 3/8" Dia • 113 Pieces


SELF-LOCKING NUTSCA126

• Nylon Insert – UNC and UNF Zinc Plated • 12 Sizes: 3/16" to 1/2" • 131 Pieces


BRASS FITTINGSCA132

• Olives Unions Flare Nuts and Reducing Bushes • 33 Types • 111 Pieces


Replacement Packs:

BRASS FITTINGSCA134

• Single and Double Unions, Nuts and Elbows • 22 Types • 110 Pieces


Replacement Packs:


CA140

• Fibre Aluminium and Copper Crush Metric • 12 Sizes: 12mm to 25mm ID • 132 Pieces



CA150

• Fibre Metric & Imperial • 10 Sizes: 1/2" to 1" & 18 to 30mm ID • Thickness: 3/32" • 143 Pieces


ASSORTMENTS

16

CIRCLIPSCA155

• Imperial Internal and External • 14 Sizes: 1/4" to 1" • 155 Pieces



• Insulated Crimp Type • 14 Types incl Spade Ring Tab and Splice • 136 Pieces


CABLE LUGS ASSORTMENTCA166

• Cable Solder Lugs • Cables 25mm² to 95mm² • 6mm to 12mm stud • 10 Sizes • 66 Pieces


BONDED SEAL WASHERSCA173

• Imperial • 8 Sizes: 1/8" to 1-1/4" ID BSP • 82 Pieces


BONDED SEAL WASHERSCA174

• Metric • 14 Sizes: Suits 8mm ID to 42mm ID • 91 Pieces


WOODRUFF KEYSCA177

• Imperial • 17 Sizes: No2 to No’E’ (3/32" to 3/8") • 177 Pieces


BRASS FITTINGSCA178

• Single & Double Unions Dole Nuts M/F Elbows Nipples & Plugs • 32 Types • 155 Pieces


Replacement Packs:


• Metric High Tensile GR8.8 Zinc Plated • 18 Sizes: M4 to M10 Dia • 226 Pieces


FLANGE HD HEX SET SCREWS & NUTS

CA200

• Metric JIS High Tensile GR8.8 Zinc Plated • 18 Sizes: 5mm to 10mm • 202 Pieces


Replacement Packs:


17

O’ RINGSCA212

• High Pressure Series Nitrile Imperial 90 Shore • 20 Sizes: 3/16" to 2" with Removing Tool • 212 Pieces


COPPER WASHERSCA225

• Imperial • 12 Sizes: 1/4" to 1" ID • Thickness: 1/16" • 260 Pieces


FUEL INJECTION COPPER WASHERS

CA226

• Metric • 14 Sizes: 6mm to 26mm ID • Thickness: 1, 1.5 & 2mm • 305 Pieces



• Fine Thread Round Head Slotted Nickel Plated Imperial • 14 Sizes: 6/40" to 10/32" • 300 Pieces


WIRING CONNECTOR BLOCKCA240

• M/F with Brass Terminals • 4 Sizes: 2 4 6 & 8 Pin • 240 Pieces



• Mushroom Head Slotted UNC Zinc Plated Imperial • 10 Sizes: 3/16" to 1/4" • 300 Pieces



• Nylon Insert Metric Zinc Plated • 10 Sizes: M5 x 0.8 to M12 x 1.75 • 270 Pieces


SELF-LOCKING FLANGE NUT ASSORTMENT

CA272

• Self Locking Nylon Flange Hex Nuts • Metric • Sizes M3 to M12 • 10 Sizes • 205 Pieces



• 006" Thickness • 22 Sizes: 5/8" to 1-3/8" ID • 276 Pieces


ASSORTMENTS

18

SPLIT PINSCA280

• Split Pins • Metric & Imperial • Zinc Plated • 11 Sizes: 5mm to 13mm Dia. Lengths to 150mm • IMP 3/8" and 1/2" Dia. Lengths 4" to 6"• 93 Pieces


Replacement Packs:


• Round Head Slotted BSW Zinc Plated Imperial • 8 Sizes: 1/8" x 3/4" to 1/4" x 2" • 360 Pieces


HEX NUTSCA300

• Metric Plain and Self-Locking Zinc Plated • 12 Sizes: Plain M3 to M10 Self-Locking M4 to M10 • 320 Pieces


MOTORCYCLE FASTENERSCA302

• Metric Socket Head, Machine Screws, Hex bolts, Nuts & Star Washers. Zinc Plated • 28 Sizes • 191 Pieces


Replacement Packs:

FLAT STEEL WASHERSCA330

• Imperial and Metric Zinc Plated • 10 Sizes: 3/16" to 3/4" & M10 ID • 330 Pieces



• Metric • Hex Head Zinc Plated • 14 Sizes: 3.5mm to 6.3mm • Lengths to 25mm • 350 Pieces



• Nylon Insert Metric UNC UNF and Zinc Plated • 10 Sizes: M6 to M10 & 1/4" to 3/8" • 166 Pieces


SPEED NUTSCA380

• ‘U’ and Flat Types • Zinc Passivated • 12 Sizes: 2.4mm to 4.8mm Dia • 390 Pieces


FIBRE WASHERSCA390

• Imperial • 12 Sizes: 5/32" to 3/4" ID • Thickness: 1/16" • 405 Pieces



19

FIBRE WASHERSCA400



IMPERIAL ‘O’ RINGSCA407

• Nitrile 70 Shore • 32 Sizes: 1/8" to 2" ID • 407 Pieces


METRIC ‘O’ RINGSCA408

• Nitrile 70 Shore • 32 Sizes: 3mm to 50mm ID • 408 Pieces


O’ RING SPLICING KIT. IMPERIAL

CA409

• Nitrile 70 Shore • 5 Imperial Sizes: ‘O’ Ring Cord 070" to 275" (36" each)


Replacement Packs:

O’ RING SPLICING KIT. METRIC

CA410

• Nitrile 70 Shore • 9 Metric Sizes: ‘O’ Ring Cord 1.5mm to 8.5mm (900mm each)


Replacement Packs:

AIR CONDITIONING ‘O’ RINGSCA411

• Suits R134A Gas HMBR (Green) Imperial 70 Shore • 10 Sizes: 3/16" to 3/4" • 145 Pieces



• Metric • Raised and Pan Head Slotted Zinc Plated • 12 Sizes: 3.5mm to 5.5mm • Lengths to 25mm • 420 Pieces



• Raised Hex and Pan Head Metric Zinc Plated • 14 Sizes: 2.2mm to 6.3mm • Lengths to 38mm • 430 Pieces


SPACING WASHERS STEELCA500

• Imperial • 14 Sizes: 1/4" to 1-1/8" ID • Thickness: (028") • 545 Pieces


ASSORTMENTS

20

RIVETSCA502

• Metric • Blind Aluminium • 10 Sizes: 2.4mm to 4.8mm Dia • 505 Pieces


RIVET NUT INSERTS-STEEL

CA505

• 5 Sizes: 4mm to 10mm Dia • 80 Pieces


RIVET NUT INSERT - ALUMINIUM

CA506

• Thread Inserts Aluminium • 5 Sizes • M4 to M10 • 80 Pieces


STAR WASHERSCA510

• Imperial • Internal and External Zinc Plated • 14 Sizes: 3/16" to 5/8" • 500 Pieces


SPRING WASHERSCA520

• Imperial and Metric Zinc Plated • 11 Sizes: 5/32" to 3/4" & M4 to M16 ID • 535 Pieces


SELF-DRILLING SCREWSCA530

• Metric • Wafer and Hex Head Yellow Zinc • 8 Sizes: 4.2mm to 4.8mm • Lengths to 30mm • 400 Pieces



• Metric • Pan and Raised Head Phillips Nickel Plated • 16 Sizes: 3.5mm to 4.8mm • Lengths to 38mm • 540 Pieces



• Metric • Pan and Raised Head Slotted Zinc Plated • 16 Sizes: 3.5mm to 4.8mm • Lengths to 25mm • 610 Pieces



• Metric • Pan Head Slotted Zinc Plated • 8 Sizes: 3.5mm to 4.8mm • Lengths to 48mm • 400 Pieces



21

ANTI-THEFT ONE WAY SCREWS

CA570

• Metric • Self-Tapping & 6mm Thread incl Washers & Nuts Zinc Plated • 6 Sizes • 560 Pieces

NPS5, NPS7, SWS30, PN2, SNU0537, C2205-4

Replacement Packs:


• Imperial and Metric Zinc Plated • 13 Sizes: 3/16" to 3/4" & 6mm to 20mm ID • 695 Pieces


FLAT STEEL HEAVY DUTY WASHERS

CA600

• Imperial Zinc Plated • 8 Sizes: 3/16" to 3/4" ID • Thickness: 3/32" • 605 Pieces


SPRING WASHERSCA648

• Imperial and Metric Zinc Plated • 12 Sizes: 5/32" to 5/8" & 4mm to 20mm ID • 933 Pieces


SPLIT PINSCA800

• Metric & Imperial Zinc Plated • 10 Sizes: 1.6mm to 4mm Dia incl 7/64" & 9/64" Dia • 795 Pieces


FIBRE WASHERSCA825



SPRING WASHERSCA1008

• Square Section Zinc Plated Imperial • 8 Sizes: 3/16" to 3/4" ID • 895 Pieces


SPLIT PINSCA1152

• Metric & Imperial • Zinc Plated • 8 Sizes: 1.6mm to 3.2mm Dia incl 7/64" Dia • 800 Pieces



• Pan and Raised Head Phillips Black Zinc • 14 Sizes: 3.5mm to 4.8mm • Lengths to 38mm • 415 Pieces


ASSORTMENTS

22

LINKAGES (BALL JOINTS)CA1320

• Imperial, UNF & UNC Thread • 90° and Inline • Zinc Plated • 10 Sizes: 3/16" to 5/16" • 20 Pieces

Replacement Packs:

EXPANSION PLUGSCA1411

• Cup Type Steel Zinc Plated Metric • 12 Sizes: 18mm to 46.5mm • 48 Pieces


BRASS OLIVESCA1412

• Imperial & Metric • Suits Copper and Nylon Tube • Sizes: Copper 1/8" to 1/2" & Nylon 3/16" to 3/8" • 6mm Copper & Nylon • 12 sizes • 330 Pieces


SOCKET SET (GRUB) SCREWSCA1416

• Metric & Imperial GR8.8 • High Tensile • 14 Sizes: 5mm to 8mm & 3/16" to 3/8" BSW • 164 Pieces



• Metric High Tensile GR8.8 • 14 Sizes: M5 to M10 Dia Lengths to 40mm • 90 Pieces



• Imperial • BSW High Tensile GR5• 14 Sizes: 3/16" to 5/16" Dia • Lengths to 1-1/2" • 92 Pieces



• Countersunk Metric GR8.8, • High Tensile • Sizes: 4mm to 8mm Dia • Lengths to 30mm • 124 Pieces


BUTTON HEAD CAP SCREWSCA1420

• Metric GR10.9 • 14 sizes: 4mm to 8mm Dia • Lengths to 30mm • 124 Pieces


ROLL PINSCA1421

• Imperial • 18 Sizes: 1/16" to 1/4" Dia (Small Sizes) • 380 Pieces



23

E’ CLIPS & RETAINER SPRINGS

CA1424

• Imperial • 14 Sizes: 3/32" to 5/8" • 740 Pieces


ROLL PINSCA1435

• Imperial • 12 Sizes: 3/16" to 3/8" Dia (Large Sizes) • 89 Pieces


POLYPROPYLENE WASHERSCA1460

• Imperial and Metric • 10 Sizes: 18mm to 30mm & 1/2" to 1" ID • Thickness: 3mm • 123 Pieces


HEX SET SCREWS & NUTSCA1480

• Metric GR8.8 ISO and Fine Pitch Zinc Plated • 9 Sizes: M6 to M12 Dia • 139 Pieces

C431 & C480Replacement Packs:

COPPER WASHERSCA1660

• Metric • 10 Sizes: 5mm to 24mm ID • Thickness: 1mm • 260 Pieces


FLAT WASHERSCA1670

• Extra Heavy Duty Imperial Zinc Plated • 8 Sizes: 3/16" to 3/4" ID • Thickness: up to 3/16" • 325 Pieces


POLYPROPYLENE WASHERSCA1680



TAPER PINSCA1690

• Imperial • 14 Sizes: No 0 x 1" to No 5 x 2" (Small Sizes) • 140 Pieces


TAPER PINSCA1700

• Imperial • 14 Sizes: No 4 x 2-1/2" to No10 x 6" (Large Sizes) • 33 Pieces

Replacement Packs:

ASSORTMENTS

24

WOODRUFF KEYSCA1705

• Metric • 17 Sizes: 2mm x 10mm to 10mm x 32mm • 164 Pieces



• Metric • Pan Head Phillips Zinc Plated • 14 Sizes: 3.5mm to 5.5mm • Lengths to 50mm • 415 Pieces


ROLL PINSCA1715

• Metric • 18 Sizes: 2mm to 6mm Dia Lengths to 30mm • 360 Pieces



• Metric • Mushroom Head Black Zinc • 14 Sizes: 3.5mm to 5.5mm • Lengths to 50mm • 415 Pieces


ROLL PINSCA1725

• Metric • 12 Sizes: 5mm to 10mm Dia (Large Sizes) • 82 Pieces


PANEL (BODY) WASHERSCA1730

• Imperial • Panel (Body) Steel and Stainless Steel Zinc Plated • 8 Sizes: 3/16" to 1/2" ID • 143 Pieces


PLASTIC TRIM CLIPSCA1735

• Including Screw Grommets • 14 Sizes • 180 Pieces


NYLON WASHERSCA1740

• Metric and Imperial • 11 Sizes: 12mm to 25mm & 1/2" to 13/16" ID • 160 Pieces


R’ CLIPSCA1745

• Imperial • Zinc Plated • 8 Sizes: 1/8" to 1" (Shaft Size) • 124 Pieces



25


• Imperial • 14 Sizes: 3/16" to 1" ID • Thickness 006" • 190 Pieces



• Imperial High Tensile Zinc Plated • 10 Sizes: 1/4" to 1" ID • 175 Pieces


CIRCLIPSCA1760

• Metric Internal and External • 14 Sizes: 6mm to 25mm • 155 Pieces


LOCK RINGSCA1765

• Metric • External SPN Type • 10 Sizes: 1.5mm to 12mm • 825 Pieces


ALUMINIUM WASHERSCA1770

• Imperial and Metric • 15 Sizes: 1/4" to 1" ID & 5mm to 20mm ID • Thickness: 1/16" & 1.5mm • 315 Pieces


TORX® SECURITY MACHINE SCREWS

CA1772

• Metric Pan Head Zinc Plated • 15 Sizes: M4 to M6 Dia • Lengths: 10mm to 30mm • 365 Pieces



CA1774

• Metric Countersunk Zinc Plated • 13 Sizes: 4mm to 6mm • Lengths: 10mm to 30mm • 325 Pieces


TORX® SECURITY SELF-TAPPING SCREWS

CA1776

• Metric • Pan Head Zinc Plated • 17 Sizes: 3.5mm to 4.8mm Dia • Lengths: 13mm to 38mm • 425 Pieces



CA1778

• Metric • Countersunk Zinc Plated • 17 Sizes: 3.5 to 4.8mm Dia • Lengths: 13mm to 38mm • 425 Pieces


ASSORTMENTS

26

STAR WASHERSCA1780

• Metric • Internal and External Zinc Plated • 14 Sizes: 4mm to 16mm • 560 Pieces


TORX® SECURITY SELF-DRILLING SCREWS

CA1782

• Metric • Pan Head Zinc Plated • 15 Sizes: 3.5mm to 4.8mm Dia • Lengths: 13mm to 38mm • 375 Pieces


TORX® SECURITY BUTTON HEAD SCREWS

CA1784

• Metric Zinc Plated • 14 Sizes: M4 to M8 Dia • Lengths: 16mm to 30mm • 270 Pieces


MACHINE SCREWSCA1786

• Metric Countersunk Zinc Plated • 13 Sizes: M3 to M6 Dia • Lengths: 16mm to 50mm • 345 Pieces



CA1790

• Aluminium Metric & Imperial • 8 Sizes: 12mm to 24mm & 1/2" ID • Thickness: 2.5mm • 100 Pieces


NYLON NUTSCA1792

• Metric Wing Dome and Hex Nuts • 9 Sizes: M5 to M8 Dia & 5mm to 8mm • 255 Pieces


WING NUTSCA1794

• Metric and Imperial UNC Zinc Plated • 9 Sizes: M4 to M10 UNC 3/16" to 3/8" • 240 Pieces


COUPLING NUTSCA1796

• Metric and Imperial UNC Zinc Plated • Hex • 10 Sizes: M5 to M12 & 3/16" to 7/16" • 92 Pieces


WING SCREWSCA1798

• Metric Zinc Plated • 8 Sizes: M4 to M6 Dia • Lengths: 16mm to 40mm • 95 Pieces


STAINLESS ASSORTMENTS

27

ASSORTED PRODUCTSCA1800

• Metric & Imperial • Bolts, Screws, Washers and Split Pins • GR 304/A2 • 38 Sizes • 324 Pieces

Replacement Packs:

GREASE NIPPLESCA1808

• Metric and Imperial • GR 316/A4 • 14 Sizes • 170 Pieces



• Metric • Pan Head Phillips• GR 304/A2 • 15 Sizes: 2.2mm to 4.8mm Dia. • Lengths: 13mm to 38mm • 415 Pieces


ROLL PINSCA1815

• Metric • GR 304/A2 • 14 Sizes: 2mm to 6mm Dia • 210 Pieces


GRUB SCREWSCA1816

• Metric and Imperial• GR 316/A4 • 14 Sizes: 5mm to 8mm & 3/16" to 3/8" BSW • 140 Pieces


CAP SCREWS - METRICCA1817

• Metric• GR 316/A4 • 14 Sizes: 5mm to 10mm • Lengths 10mm to 40mm • 90 Pieces

C1817-1 to 14 & C1818-1 to 14

Replacement Packs:

CAP SCREWS - IMPERIALCA1818

• Imperial BSW• GR 316/A4 • 14 Sizes: 3/16" to 3/8" • Lengths to 1-1/2" • 91 Pieces

C1817-1 to 14 & C1818-1 to 14

Replacement Packs:


• Metric • Countersunk Phillips • GR 304/A2 • 15 Sizes: 2.2mm to 4.8mm Dia. • Lengths to 38mm • 415 Pieces


E’ CLIPSCA1824

• Metric• GR 304/A2 • 8 Sizes: 1.9mm to 15mm • 325 Pieces


STAINLESS ASSORTMENTS

28

FLAT & PANEL WASHERSCA1830

• Imperial • GR304/A2 • 16 Sizes: 1/8" to 3/4" ID • 385 Pieces


SPRING WASHERSCA1840

• Imperial & Metric • GR 304/A2 • 12 Sizes: 5/32" to 3/4", 4mm to 16mm ID • 345 Pieces


WAVE WASHER ASSORTMENT STAINLESS STEEL

CA1845

• Metric • Wave Washer • Stainless Steel • GR 304/A2. • 13 Sizes 3mm to 24mm • 255 Pieces


SPLIT PINSCA1850

• Metric • GR 304/A2 • 10 Sizes: 1.6mm to 5mm Dia • 225 Pieces



• Imperial • BSW • GR 304/A2 • 10 Sizes: 1/8" to 1/4" • 256 Pieces


INTERNAL CIRCLIPSCA1861

• Metric • GR 304/A2 • 8 Sizes: 10mm to 25mm • 80 Pieces


EXTERNAL CIRCLIPSCA1862

• Metric • GR 304/A2 • 8 Sizes: 6mm to 22mm • 120 Pieces



• Metric • GR 304/A2 • 13 Sizes: M4 to M10 Dia • Lengths 20mm to 50mm • 174 Pieces



• Imperial • UNC • GR 316/A4 • 10 Sizes: 1/4" to 3/8" Dia • 140 Pieces


STAINLESS ASSORTMENT KITS | PREMIUM QUALITY IN REUSABLE CASES

29


CA1882

• Pan Head • GR 304/A2 • 14 Sizes: 3.5mm to 5.5mm Dia • Lengths to 38mm • 210 Pieces



• Metric • Raised Countersunk Phillips • GR 316/A4 • 19 Sizes: 2.2mm to 4.2mm Dia • Lengths: 12mm to 50mm • 440 Pieces



• Metric • GR 316/A4 • 4mm to 10mm Dia • Lengths 16mm to 50mm • 328 Pieces • 20 Sizes



CA1886

• Metric Pan Head • GR 304/A2 • 14 Sizes: M5 to M8 Dia • Lengths: 10mm to 30mm • 140 Pieces



• Metric • Pan Head Phillips • GR 316/A4• 14 Sizes: M5 to M6 Dia • Lengths 10mm to 50mm • 345 Pieces



• Metric • Countersunk Phillips • GR 316/A4 • 11 Sizes: M5 to M6 Dia • Lengths: 16mm to 50mm • 295 Pieces


WING SCREWS & NUTSCA1892

• Metric • GR 316/A4 • 11 Sizes: M4 to M6 • Lengths: 10mm to 25mm • 230 Pieces


RIVETSCA1894

• Blind • GR 304/A2 • 16 Sizes: 2.4mm to 5mm Dia • 330 Pieces


STAINLESS FASTENER KIT - GRADE 304 & 316

CA214

• Metric ISO • Hex Head Set Screws • Nuts Hex Plain & Self Locking • Machine Screws & Nuts • Self Tapping Screws Pan & CSK Heads Philips Recess • Washers, Flat, Spring & Panel • 52 sizes • 210 pieces

WHY CHAMPION FASTENERS? Champion Parts have been selling fasteners for over 50 years.

In this time we have earned the reputation of being a premium supplier.

We have built our reputation on great service and supplying only the highest quality products in our kits.

DISTRIBUTED BY:

champion fasteners 2018 book webchampionpartsonline.com.au/documents/champion... · ca2085 trim...

Documents