CERTIFICATE OF PRODUCT CONFORMITYDubai Central Laboratory Department (DCLD) of Dubai Municipality

hereby attests that the product(s)

Carbon Steel Bars for the Reinforcement of Concrete(Details as per the attached Scope of Certification)

UNION IRON & STEEL COMPANY LLC

P.O. Box 8529, Industrial City of Abu Dhabi-1 (ICAD-1), Musaffah, Abu Dhabi, UAE

have been assessed in accordance with DCLD Document Ref. No. DM-DCLD-RD-DP21-2001 (IC) "General Rules for DM third party product certification system through factory assessment" and the relevant Specific Rules, and were found in conformity with the standard specification:

BS 4449: 1997 with Amd.1

Accordingly, DCLD hereby authorizes the above manufacturerto affix the DCL Product Conformity Mark on the above-mentioned product(s).

manufactured by:

for / ENGR. AMIN AHMED AMINDirector, Dubai Central Laboratory Department

Dubai Municipality

Certificate No:Valid Until:

Current Issue Date:Original Issue Date:

The attached Scope of Certification bearing the same Certificate Number forms an integral part of this Certificate.This Certificate is an electronic document subject to the Terms and Conditions of the Product Certification System and shall not be reproduced except in full.

CL15020254

09/09/2020

10/09/2019

10/09/2015

DM-DCLD-F-IC-2031 Rev 16

DUBAI CENTRAL LABORATORY DEPARTMENT

DCL PRODUCT CONFORMITY CERTIFICATION SCHEME

SCOPE OF CERTIFICATION

FOR CERTIFICATE NO. CL15020254

Page 1 of 1 DM-DCLD-F-IC-2032 R9

P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE

Certificate Issued To: UNION IRON AND STEEL COMPANY LLC.

P.O. BOX 8529, ICAD-1, Musaffah, Abu Dhabi, UAE

Applicable Standard Specification: BS 4449: 1997 with Amd. 1- Specification for Carbon

Steel Bars for Reinforcement of Concrete

Applicable Specific Rules: DM-DCLD-RD-DP21- 47 IC Specific Rules for Certification of Carbon Steel Bars for the Reinforcement

of Concrete (BS 4449: 1997 with Amd. 1) Through

Factory Assessment .

S/N PRODUCT DESCRIPTION MARKING PRODUCT DETAILS

1.

Carbon steel bars for the

reinforcement of concrete

As per attached DCL Approved

Bar Markings in accordance with

DM-DCLD-RD-DP21-2091 (IC)

Grade 460B

Diameter Size : 8 mm to 32

mm in bars

NOTE1: This document forms part of the Certificate of Product Conformity bearing the same certificate number.

NOTE2: The above product shall bear the DCL Conformity Mark.

Original Issue Date : 10 September 2015

Current Issue Date : 10 September 2019

Valid Until : 09 September 2020

ARIF HUSAIN AL MARZOOQI

Products Conformity Assessment Section Manager

Dubai Central Laboratory Department

APPROVED BY:

ARIF HUSAIN AL MARZOOQI

Products Conformity Assessment Section Manager

DM-DCLD-F-IC-2045 R4

DUBAI CENTRAL LABORATORY DEPARTMENT

PRODUCTS CONFORMITY ASSESSMENT SECTION

APPROVED STEEL BAR MARKING

Certification Scheme for Reinforcing Steel

CERTIFIED FACTORY UNION IRON AND STEEL COMPANY LLC

FACTORY LOCATION P.O. Box 8529, ICAD-1, Musaffah, Abu Dhabi, UAE

CERTIFICATE NUMBER CL15020254

COUNTRY CODE 9

MILL NUMBER 75

STANDARD SPECIFICATION BS 4449:1997 with AMD 1

NOTE: Please refer to the Certificate mentioned above and its Scope of Certification for details regarding

the validity and the sizes covered.