certificate of approval no cf 821... · this certificate is the property of warrington...

This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.

Signed and sealed for and on behalf of CERTIFIRE

Sir Ken Knight Paul Duggan Chairman Certification Manager

WCL Impartiality Committee Warrington Certification Ltd

CERTIFICATE OF APPROVAL No CF 821

Issued: 9th December 2010

Revised: 4th December 2015

Valid to: 30th June 2019

of 16

This is to certify that, in accordance with

TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of

SIKA DEUTSCHLAND GMBH

Kornwestheimer Strasse 103-107, D-70439 Stuttgart,Germany

Tel: 0049 7042 109 259 Fax: 0049 7042 109 261 www.protectivecoatings.de

Have been assessed against the requirements of the Technical Schedule(s)

denoted below and are approved for use subject to the conditions appended hereto:

______________________________________________________________________________

CERTIFIED PRODUCT TECHNICAL SCHEDULE

Sika® Unitherm® Platinum TS15 Intumescent Coatings for Steelwork


CERTIFICATE No CF 821 SIKA DEUTSCHLAND GMBH

of 16 Signed C/012

Issued: 9th

December 2010 Revised: 4

th December 2015

Valid to: 30th

June 2019

Sika® Unitherm® Platinum 1. This approval relates to the use of Sika

® Unitherm

® Platinum for the fire protection of

I-shaped steel sections as well as circular hollow sections. The precise scope is given in Tables 1 to 14 which show the total dry film thickness of Sika

® Unitherm

® Platinum

(excluding primer and top sealer) required to provide fire resistance periods in accordance with BS476: Part 21: 1987 of 15 minutes up to 90 minutes for differing sections and section factors.

2. This certification is designed to demonstrate compliance of the product or system

specifically with Approved Document B (England and Wales), Section 2 of the Technical Standards (Scotland), Technical Booklet E (N. Ireland). If compliance is required to other regulatory or guidance documents there may be additional considerations or conflict to be taken into account.’

3. The products are approved on the basis of:

i) Initial type testing. ii) A design appraisal against TS15. iii) Certification of quality management system to ISO 9001: 2008

iv) Inspection and surveillance of factory production control v) Audit testing

4. The data shown is applicable to steel sections galvanised or blast cleaned to Swedish

Standard SA2.5 or equivalent and primed with a suitable and compatible primer. The data shown is also applicable to steel sections blast cleaned to Swedish Standard SA2.5 or equivalent followed by direct application of Sika® Unitherm® Platinum. Specifications of surface preparations, primers and top sealers is available from Sika Deutschland GmbH whose responsibility is to ensure that Sika® Unitherm® Platinum is compatible for use in respect of both ambient and fire conditions. The total dry film thickness of primer and top sealer together may not exceed the maximum tested thickness.

5. The data shown is applicable to Sika

® Unitherm

® Platinum applied by spray to horizontal,

vertical, flexural and compression members supporting loads up to the maximum design loads specified in BS449: Part 2 as indicated in Tables 5 and 7. For other design temperatures it should be confirmed it is acceptable to utilise these temperatures prior to using the data for approval purposes.

6. The approval relates to on going production. Product and/or its immediate packaging is

identified with the manufacturers’ name, the product name or number, the CERTIFIRE name or name and mark, together with the CERTIFIRE certificate number and application where appropriate.

7. The data shown in the tables is based on assessments which comply with the criteria for

acceptability now incorporated within the CERTIFIRE scheme.



of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

110 0.457 75 0.876 50 0.950

115 0.468 80 0.907 55 1.134

120 0.479 85 0.938 60 1.318

125 0.490 90 0.969 65 1.503

130 0.501 95 1.000 70 1.668

135 0.512 100 1.031 75 1.757

140 0.523 105 1.062 80 1.846

145 0.534 110 1.092 85 1.935

150 0.545 115 1.123 90 2.025

155 0.556 120 1.154 95 2.114

160 0.567 125 1.185 100 2.203

165 0.578 130 1.216 105 2.292

170 0.590 135 1.247 110 2.381

175 0.601 140 1.278 115 2.471

180 0.612 145 1.309 120 2.560

185 0.623 150 1.340 125 2.649

190 0.634 155 1.371

195 0.645 160 1.402

200 0.656 165 1.433

205 0.667 170 1.464

210 0.678 175 1.495

215 0.689 180 1.526

220 0.700 185 1.557

225 0.711 190 1.588

230 0.722 195 1.619

235 0.733 200 1.650

240 0.744 205 1.685

245 0.755 210 1.720

250 0.766 215 1.755

255 0.778 220 1.790

260 0.789 225 1.826

265 0.800 230 1.861

270 0.811 235 1.896

275 0.822 240 1.931

280 0.833 245 1.966

285 0.844 250 2.001

290 0.855 255 2.036

295 0.866 260 2.071

300 0.877 265 2.106

305 0.888 270 2.141

310 0.899 275 2.177

315 0.910 280 2.212

320 0.921 285 2.247

325 0.932 290 2.282

330 0.943 295 2.317

335 0.954 300 2.352

340 0.965 305 2.387

310 2.422

315 2.457

320 2.493

325 2.528

330 2.563

335 2.598

340 2.633

I' or 'H' Shaped Sections: 350oC

15 minutes 30 minutes 45 minutes

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Sika® Unitherm® Platinum

Table 1

Thickness is intumescent only. Table applies to 3 or 4 sided protection.



of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

150 0.457 40 0.457 55 0.996 30 1.019

155 0.465 45 0.469 60 1.076 35 1.134

160 0.471 50 0.504 65 1.157 40 1.249

165 0.477 55 0.539 70 1.237 45 1.364

170 0.484 60 0.573 75 1.318 50 1.479

175 0.490 65 0.608 80 1.398 55 1.594

180 0.496 70 0.643 85 1.479 60 1.709

185 0.503 75 0.678 90 1.559 65 1.824

190 0.509 80 0.712 95 1.640 70 1.939

195 0.515 85 0.747 100 1.691 75 2.054

200 0.522 90 0.782 105 1.742 80 2.169

205 0.528 95 0.817 110 1.792 85 2.284

210 0.534 100 0.851 115 1.843 90 2.399

215 0.541 105 0.886 120 1.894 95 2.514

220 0.547 110 0.921 125 1.945

225 0.553 115 0.956 130 1.995

230 0.560 120 0.990 135 2.046

235 0.566 125 1.025 140 2.097

240 0.572 130 1.060 145 2.148

245 0.579 135 1.079 150 2.198

250 0.585 140 1.097 155 2.249

255 0.591 145 1.116 160 2.300

260 0.598 150 1.134 165 2.351

265 0.604 155 1.153 170 2.401

270 0.610 160 1.172 175 2.452

275 0.617 165 1.190 180 2.503

280 0.623 170 1.209 185 2.554

285 0.629 175 1.227 190 2.604

290 0.636 180 1.246 195 2.655

295 0.642 185 1.264 200 2.706

300 0.648 190 1.283 205 2.757

305 0.655 195 1.302 210 2.807

310 0.661 200 1.320 215 2.858

315 0.667 205 1.339 220 2.909

320 0.674 210 1.357 225 2.960

325 0.680 215 1.376 230 3.010

330 0.686 220 1.395 235 3.061

335 0.693 225 1.413 240 3.112

340 0.699 230 1.432 245 3.163

235 1.450 250 3.213

240 1.469

245 1.488

250 1.506

255 1.525

260 1.543

265 1.562

270 1.581

275 1.599

280 1.618

285 1.636

290 1.664

295 1.694

300 1.725

305 1.755

310 1.785

315 1.816

320 1.846

325 1.876

330 1.906

335 1.937

340 1.967


15 minutes 30 minutes 45 minutes 60 minutes

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm


Table 2




of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

250 0.478 85 0.457 40 0.816 45 1.020

255 0.483 90 0.481 45 0.849 50 1.120

260 0.487 95 0.505 50 0.882 55 1.220

265 0.491 100 0.530 55 0.915 60 1.320

270 0.496 105 0.554 60 0.948 65 1.420

275 0.500 110 0.579 65 0.981 70 1.520

280 0.505 115 0.603 70 1.014 75 1.610

285 0.509 120 0.628 75 1.047 80 1.684

290 0.514 125 0.652 80 1.080 85 1.759

295 0.518 130 0.677 85 1.113 90 1.833

300 0.522 135 0.702 90 1.146 95 1.908

305 0.527 140 0.726 95 1.178 100 1.982

310 0.531 145 0.751 100 1.211 105 2.057

315 0.536 150 0.775 105 1.244 110 2.131

320 0.540 155 0.800 110 1.277 115 2.206

325 0.544 160 0.824 115 1.310 120 2.280

330 0.549 165 0.849 120 1.343 125 2.355

335 0.553 170 0.873 125 1.376 130 2.429

340 0.558 175 0.898 130 1.409

180 0.923 135 1.442

185 0.947 140 1.475

190 0.972 145 1.508

195 0.996 150 1.541

200 1.021 155 1.573

205 1.045 160 1.611

210 1.068 165 1.650

215 1.089 170 1.689

220 1.110 175 1.728

225 1.131 180 1.766

230 1.152 185 1.805

235 1.172 190 1.844

240 1.193 195 1.883

245 1.214 200 1.922

250 1.235 205 1.961

255 1.256 210 1.999

260 1.276 215 2.038

265 1.297 220 2.077

270 1.318 225 2.116

275 1.339 230 2.155

280 1.360 235 2.194

285 1.380 240 2.232

290 1.401 245 2.271

295 1.422 250 2.310

300 1.443 255 2.349

305 1.464 260 2.388

310 1.484 265 2.426

315 1.505 270 2.465

320 1.526 275 2.504

325 1.547 280 2.543

330 1.568 285 2.582

335 1.588 290 2.621

340 1.609 295 2.659

300 2.698

305 2.737

310 2.776

315 2.815

320 2.854

325 2.892

330 2.931

335 2.970

340 3.009



Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm


Table 3




of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

340 0.457 100 0.457 90 1.035 50 1.007

105 0.463 95 1.055 55 1.065

110 0.480 100 1.076 60 1.123

115 0.497 105 1.096 65 1.182

120 0.513 110 1.116 70 1.240

125 0.530 115 1.136 75 1.298

130 0.547 120 1.157 80 1.357

135 0.564 125 1.177 85 1.415

140 0.581 130 1.197 90 1.473

145 0.598 135 1.217 95 1.532

150 0.615 140 1.238 100 1.590

155 0.631 145 1.258 105 1.634

160 0.648 150 1.278 110 1.678

165 0.665 155 1.298 115 1.722

170 0.682 160 1.319 120 1.766

175 0.699 165 1.339 125 1.810

180 0.716 170 1.359 130 1.854

185 0.733 175 1.379 135 1.898

190 0.749 180 1.400 140 1.942

195 0.766 185 1.420 145 1.986

200 0.783 190 1.440 150 2.030

205 0.800 195 1.460 155 2.074

210 0.817 200 1.481 160 2.118

215 0.834 205 1.501 165 2.162

220 0.851 210 1.521 170 2.206

225 0.867 215 1.541 175 2.250

230 0.884 220 1.562 180 2.294

235 0.901 225 1.582 185 2.338

240 0.918 230 1.609 190 2.382

245 0.935 235 1.640 195 2.426

250 0.952 240 1.671 200 2.470

255 0.969 245 1.702 205 2.514

260 0.985 250 1.733

265 1.002 255 1.764

270 1.019 260 1.795

275 1.036 265 1.827

280 1.053 270 1.858

285 1.070 275 1.889

290 1.087 280 1.920

295 1.105 285 1.951

300 1.128 290 1.982

305 1.151 295 2.013

310 1.174 300 2.045

315 1.197 305 2.076

320 1.220 310 2.107

325 1.243 315 2.138

330 1.266 320 2.169

335 1.290 325 2.200

340 1.313 330 2.231

335 2.262

340 2.294

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm


I-Sections: 500oC


Table 4 Thickness is intumescent only. Table applies to 3 or 4 sided protection.



of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

340 0.457 120 0.457 45 0.457 50 1.006 75 2.192

125 0.466 50 0.485 55 1.031 80 2.338

130 0.479 55 0.514 60 1.055 85 2.484

135 0.491 60 0.543 65 1.080 90 2.630

140 0.503 65 0.572 70 1.105 95 2.776

145 0.515 70 0.601 75 1.130

150 0.527 75 0.630 80 1.154

155 0.539 80 0.659 85 1.179

160 0.551 85 0.688 90 1.204

165 0.563 90 0.717 95 1.229

170 0.575 95 0.746 100 1.253

175 0.588 100 0.775 105 1.278

180 0.600 105 0.804 110 1.303

185 0.612 110 0.833 115 1.328

190 0.624 115 0.862 120 1.352

195 0.636 120 0.891 125 1.377

200 0.648 125 0.920 130 1.402

205 0.660 130 0.949 135 1.427

210 0.672 135 0.978 140 1.451

215 0.684 140 1.007 145 1.476

220 0.697 145 1.036 150 1.501

225 0.709 150 1.065 155 1.525

230 0.721 155 1.094 160 1.550

235 0.733 160 1.118 165 1.579

240 0.745 165 1.140 170 1.621

245 0.757 170 1.161 175 1.664

250 0.769 175 1.183 180 1.706

255 0.781 180 1.205 185 1.749

260 0.793 185 1.227 190 1.791

265 0.806 190 1.249 195 1.834

270 0.818 195 1.271 200 1.876

275 0.830 200 1.293 205 1.919

280 0.842 205 1.315 210 1.961

285 0.854 210 1.337 215 2.004

290 0.866 215 1.359 220 2.046

295 0.878 220 1.381 225 2.089

300 0.890 225 1.403 230 2.131

305 0.903 230 1.425 235 2.174

310 0.915 235 1.447 240 2.216

315 0.927 240 1.469 245 2.259

320 0.939 245 1.491 250 2.301

325 0.951 250 1.513 255 2.344

330 0.963 255 1.535 260 2.386

335 0.975 260 1.557 265 2.429

340 0.987 265 1.581 270 2.471

270 1.609 275 2.514

275 1.637 280 2.556

280 1.665 285 2.599

285 1.693 290 2.641

290 1.720 295 2.684

295 1.748 300 2.726

300 1.776 305 2.769

305 1.804 310 2.811

310 1.832 315 2.854

315 1.860 320 2.896

320 1.888 325 2.939

325 1.916 330 2.981

330 1.943 335 3.024

335 1.971 340 3.066

340 1.999



Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

15 minutes

Section

factor up to

m-1

Thckness mm


Table 5

Thickness is intumescent only. Table applies to 3 or 4 sided protection. Table also applies to 4 Sided protection to columns when subject to the maximum design loads in accordance with BS 449: Part 2.



of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

340 0.457 125 0.457 75 0.457 60 1.017 85 2.270

130 0.463 80 0.471 65 1.035 90 2.404

135 0.473 85 0.494 70 1.053 95 2.537

140 0.484 90 0.517 75 1.071

145 0.494 95 0.540 80 1.089

150 0.504 100 0.563 85 1.107

155 0.515 105 0.586 90 1.125

160 0.525 110 0.609 95 1.143

165 0.536 115 0.632 100 1.161

170 0.546 120 0.655 105 1.180

175 0.557 125 0.678 110 1.198

180 0.567 130 0.701 115 1.216

185 0.578 135 0.724 120 1.234

190 0.588 140 0.747 125 1.252

195 0.599 145 0.770 130 1.270

200 0.609 150 0.792 135 1.288

205 0.619 155 0.815 140 1.306

210 0.630 160 0.838 145 1.324

215 0.640 165 0.861 150 1.342

220 0.651 170 0.884 155 1.360

225 0.661 175 0.907 160 1.378

230 0.672 180 0.930 165 1.396

235 0.682 185 0.953 170 1.415

240 0.693 190 0.976 175 1.433

245 0.703 195 0.999 180 1.451

250 0.713 200 1.022 185 1.469

255 0.724 205 1.045 190 1.487

260 0.734 210 1.068 195 1.505

265 0.745 215 1.091 200 1.523

270 0.755 220 1.113 205 1.541

275 0.766 225 1.135 210 1.559

280 0.776 230 1.158 215 1.586

285 0.787 235 1.180 220 1.624

290 0.797 240 1.202 225 1.663

295 0.807 245 1.224 230 1.702

300 0.818 250 1.246 235 1.741

305 0.828 255 1.268 240 1.780

310 0.839 260 1.291 245 1.819

315 0.849 265 1.313 250 1.858

320 0.860 270 1.335 255 1.897

325 0.870 275 1.357 260 1.936

330 0.881 280 1.379 265 1.974

335 0.891 285 1.402 270 2.013

340 0.901 290 1.424 275 2.052

295 1.446 280 2.091

300 1.468 285 2.130

305 1.490 290 2.169

310 1.512 295 2.208

315 1.535 300 2.247

320 1.557 305 2.286

325 1.588 310 2.324

330 1.634 315 2.363

335 1.679 320 2.402

340 1.725 325 2.441

330 2.480

335 2.519

340 2.558


Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm


15 minutes

Section

factor up to

m-1

Thckness mm


Table 6




of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

340 0.457 180 0.546 75 0.457 30 0.445 30 1.479

185 0.555 80 0.464 35 0.485 35 1.542

190 0.564 85 0.483 40 0.526 40 1.605

195 0.573 90 0.501 45 0.566 45 1.668

200 0.582 95 0.520 50 0.607 50 1.732

205 0.591 100 0.539 55 0.647 55 1.795

210 0.599 105 0.557 60 0.688 60 1.858

215 0.608 110 0.576 65 0.728 65 1.921

220 0.617 115 0.595 70 0.768 70 1.984

225 0.626 120 0.614 75 0.809 75 2.047

230 0.635 125 0.632 80 0.849 80 2.111

235 0.643 130 0.651 85 0.890 85 2.174

240 0.652 135 0.670 90 0.930 90 2.237

245 0.661 140 0.688 95 0.971 95 2.300

250 0.670 145 0.707 100 1.011 100 2.363

255 0.679 150 0.726 105 1.051 105 2.426

260 0.687 155 0.745 110 1.092 110 2.489

265 0.696 160 0.763 115 1.113

270 0.705 165 0.782 120 1.128

275 0.714 170 0.801 125 1.144

280 0.723 175 0.819 130 1.160

285 0.731 180 0.838 135 1.176

290 0.740 185 0.857 140 1.192

295 0.749 190 0.876 145 1.207

300 0.758 195 0.894 150 1.223

305 0.767 200 0.913 155 1.239

310 0.775 205 0.932 160 1.255

315 0.784 210 0.950 165 1.271

320 0.793 215 0.969 170 1.286

325 0.802 220 0.988 175 1.302

330 0.811 225 1.006 180 1.318

335 0.819 230 1.025 185 1.334

340 0.828 235 1.044 190 1.349

240 1.063 195 1.365

245 1.081 200 1.381

250 1.100 205 1.397

255 1.129 210 1.413

260 1.158 215 1.428

265 1.187 220 1.444

270 1.216 225 1.460

275 1.245 230 1.476

280 1.273 235 1.492

285 1.302 240 1.507

290 1.331 245 1.523

295 1.360 250 1.539

300 1.389 255 1.555

305 1.418 260 1.571

310 1.447 265 1.604

315 1.476 270 1.664

320 1.505 275 1.724

325 1.534 280 1.784

330 1.563 285 1.844

335 1.594 290 1.904

340 1.629 295 1.964

300 2.024

305 2.084

310 2.144

315 2.204

320 2.264

325 2.324

330 2.384

335 2.444

340 2.504

15 minutes

Section

factor up to

m-1

Thckness mm



Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm


Table 7 Thickness is intumescent only. Table applies to 3 or 4 sided protection. Table also applies to 3 sided protection to beams with concrete slabs when subject to the maximum design loads in accordance with BS 449: Part 2.



of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

340 0.457 180 0.528 80 0.457 30 0.457 30 1.413

185 0.537 85 0.487 35 0.472 35 1.475

190 0.546 90 0.503 40 0.509 40 1.538

195 0.554 95 0.519 45 0.547 45 1.600

200 0.563 100 0.535 50 0.585 50 1.663

205 0.572 105 0.551 55 0.623 55 1.725

210 0.580 110 0.567 60 0.661 60 1.788

215 0.589 115 0.583 65 0.699 65 1.850

220 0.598 120 0.599 70 0.737 70 1.913

225 0.607 125 0.615 75 0.774 75 1.975

230 0.615 130 0.631 80 0.812 80 2.038

235 0.624 135 0.647 85 0.850 85 2.100

240 0.633 140 0.663 90 0.888 90 2.163

245 0.641 145 0.679 95 0.926 95 2.225

250 0.650 150 0.695 100 0.964 100 2.288

255 0.659 155 0.711 105 1.002 105 2.350

260 0.667 160 0.727 110 1.039 110 2.413

265 0.676 165 0.743 115 1.077 115 2.475

270 0.685 170 0.759 120 1.106 120 2.538

275 0.693 175 0.775 125 1.122 125 2.600

280 0.702 180 0.791 130 1.138

285 0.711 185 0.807 135 1.153

290 0.720 190 0.823 140 1.169

295 0.728 195 0.839 145 1.184

300 0.737 200 0.855 150 1.200

305 0.746 205 0.871 155 1.216

310 0.754 210 0.887 160 1.231

315 0.763 215 0.903 165 1.247

320 0.772 220 0.919 170 1.263

325 0.780 225 0.935 175 1.278

330 0.789 230 0.951 180 1.294

335 0.798 235 0.967 185 1.309

340 0.807 240 0.983 190 1.325

245 0.999 195 1.341

250 1.015 200 1.356

255 1.031 205 1.372

260 1.047 210 1.388

265 1.063 215 1.403

270 1.079 220 1.419

275 1.095 225 1.434

280 1.111 230 1.450

285 1.127 235 1.466

290 1.152 240 1.481

295 1.180 245 1.497

300 1.208 250 1.513

305 1.236 255 1.528

310 1.264 260 1.544

315 1.292 265 1.559

320 1.320 270 1.575

325 1.348 275 1.591

330 1.376 280 1.627

335 1.404 285 1.695

340 1.432 290 1.764

295 1.832

300 1.900

305 1.968

310 2.036

315 2.105

320 2.173

325 2.241

330 2.309

335 2.377

340 2.445



Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

15 minutes

Section

factor up to

m-1

Thckness mm


Table 8 Thickness is intumescent only. Table applies to 3 or 4 sided protection.



of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019

340 0.457 200 0.543 100 0.530 30 0.457 30 1.364

205 0.549 105 0.542 35 0.479 35 1.418

210 0.555 110 0.554 40 0.502 40 1.471

215 0.562 115 0.566 45 0.525 45 1.524

220 0.568 120 0.578 50 0.548 50 1.578

225 0.574 125 0.590 55 0.570 55 1.631

230 0.580 130 0.602 60 0.593 60 1.685

235 0.586 135 0.614 65 0.616 65 1.738

240 0.592 140 0.626 70 0.639 70 1.792

245 0.599 145 0.638 75 0.670 75 1.845

250 0.605 150 0.650 80 0.691 80 1.899

255 0.611 155 0.662 85 0.712 85 1.952

260 0.617 160 0.674 90 0.733 90 2.006

265 0.623 165 0.686 95 0.754 95 2.059

270 0.630 170 0.698 100 0.775 100 2.113

275 0.636 175 0.710 105 0.796 105 2.166

280 0.642 180 0.723 110 0.817 110 2.220

285 0.648 185 0.735 115 0.838 115 2.273

290 0.654 190 0.747 120 0.859 120 2.327

295 0.660 195 0.759 125 0.880 125 2.380

300 0.667 200 0.771 130 0.901 130 2.433

305 0.673 205 0.783 135 0.922 135 2.487

310 0.679 210 0.795 140 0.943 140 2.540

315 0.685 215 0.807 145 0.964

320 0.691 220 0.819 150 0.985

325 0.697 225 0.831 155 1.006

330 0.704 230 0.843 160 1.027

335 0.710 235 0.855 165 1.048

340 0.716 240 0.867 170 1.070

245 0.879 175 1.091

250 0.891 180 1.112

255 0.903 185 1.132

260 0.915 190 1.152

265 0.927 195 1.173

270 0.939 200 1.193

275 0.951 205 1.213

280 0.963 210 1.233

285 0.975 215 1.254

290 0.988 220 1.274

295 1.000 225 1.294

300 1.012 230 1.314

305 1.024 235 1.335

310 1.036 240 1.355

315 1.048 245 1.375

320 1.060 250 1.395

325 1.072 255 1.416

330 1.084 260 1.436

335 1.096 265 1.456

340 1.108 270 1.476

275 1.497

280 1.517

285 1.537

290 1.557

295 1.578

300 1.598

305 1.633

310 1.690

315 1.748

320 1.805

325 1.863

330 1.920

335 1.978

340 2.035


Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1

Thckness mm

Section

factor up to

m-1


15 minutes

Section

factor up to

m-1

Thckness mm Thckness mm


Table 9




of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019


Table 10

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

330 0.877 120 0.877 50 0.877 50 1.605

125 0.935 55 0.997 55 1.818

130 1.031 60 1.130 60 2.030

135 1.127 65 1.264 65 2.259

140 1.223 70 1.398 70 2.555

145 1.318 75 1.531 75 2.850

150 1.414 80 1.665 80 3.145

155 1.510 85 1.799 85 3.441

160 1.606 90 1.933 90 3.576

165 1.702 95 2.066 95 3.671

170 1.798 100 2.200 100 3.767

175 1.893 105 2.316 105 3.862

180 1.989 110 2.432 110 3.957

185 2.085 115 2.548 115 4.052

190 2.181 120 2.664 120 4.148

195 2.266 125 2.780 125 4.243

200 2.348 130 2.896 130 4.338

205 2.430 135 3.013 135 4.433

210 2.513 140 3.129 140 4.529

215 2.595 145 3.245 145 4.624

220 2.677 150 3.361 150 4.719

225 2.759 155 3.477 155 4.814

230 2.842 160 3.529 160 4.910

235 2.924 165 3.566

240 3.006 170 3.603

245 3.089 175 3.640

250 3.171 180 3.677

255 3.253 185 3.713

260 3.335 190 3.750

265 3.418 195 3.787

270 3.500 200 3.824

275 3.521 205 3.861

280 3.542 210 3.898

285 3.562 215 3.934

290 3.583 220 3.971

295 3.604 225 4.008

300 3.625 230 4.045

305 3.645 235 4.082

310 3.666 240 4.118

315 3.687 245 4.155

320 3.708 250 4.192

325 3.728 255 4.229

330 3.749 260 4.266

265 4.302

270 4.339

275 4.376

280 4.413

285 4.450

290 4.487

295 4.523

300 4.560

305 4.597

310 4.634

315 4.671

320 4.707

325 4.744

330 4.781

60 minutes

Circular Hollow Columns: 500oC


Thickness is intumescent only.



of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019


Table 11

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

330 0.877 125 0.877 50 0.877 50 1.494

130 0.922 55 0.903 55 1.701

135 1.013 60 1.026 60 1.909

140 1.105 65 1.148 65 2.117

145 1.196 70 1.270 70 2.344

150 1.287 75 1.393 75 2.585

155 1.379 80 1.515 80 2.826

160 1.470 85 1.637 85 3.067

165 1.561 90 1.760 90 3.307

170 1.652 95 1.882 95 3.518

175 1.744 100 2.004 100 3.607

180 1.835 105 2.127 105 3.697

185 1.926 110 2.244 110 3.787

190 2.017 115 2.354 115 3.876

195 2.109 120 2.464 120 3.966

200 2.200 125 2.575 125 4.055

205 2.269 130 2.685 130 4.145

210 2.338 135 2.795 135 4.234

215 2.407 140 2.905 140 4.324

220 2.477 145 3.015 145 4.413

225 2.546 150 3.125 150 4.503

230 2.615 155 3.236 155 4.593

235 2.684 160 3.346 160 4.682

240 2.753 165 3.456 165 4.772

245 2.822 170 3.522 170 4.861

250 2.891 175 3.558 175 4.951

255 2.961 180 3.594

260 3.030 185 3.630

265 3.099 190 3.666

270 3.168 195 3.702

275 3.237 200 3.739

280 3.306 205 3.775

285 3.376 210 3.811

290 3.445 215 3.847

295 3.504 220 3.883

300 3.524 225 3.919

305 3.545 230 3.955

310 3.565 235 3.992

315 3.586 240 4.028

320 3.606 245 4.064

325 3.627 250 4.100

330 3.647 255 4.136

260 4.172

265 4.208

270 4.245

275 4.281

280 4.317

285 4.353

290 4.389

295 4.425

300 4.461

305 4.498

310 4.534

315 4.570

320 4.606

325 4.642

330 4.678






of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019


Table 12

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

330 0.877 135 0.877 60 0.877 50 1.341

140 0.954 65 0.986 55 1.536

145 1.034 70 1.093 60 1.731

150 1.114 75 1.199 65 1.927

155 1.194 80 1.306 70 2.122

160 1.274 85 1.412 75 2.308

165 1.353 90 1.519 80 2.489

170 1.433 95 1.625 85 2.669

175 1.513 100 1.731 90 2.850

180 1.593 105 1.838 95 3.031

185 1.673 110 1.944 100 3.211

190 1.753 115 2.051 105 3.392

195 1.833 120 2.157 110 3.530

200 1.913 125 2.260 115 3.604

205 1.992 130 2.360 120 3.678

210 2.072 135 2.460 125 3.752

215 2.152 140 2.560 130 3.826

220 2.229 145 2.660 135 3.900

225 2.302 150 2.760 140 3.974

230 2.375 155 2.860 145 4.048

235 2.448 160 2.960 150 4.122

240 2.521 165 3.060 155 4.196

245 2.594 170 3.160 160 4.270

250 2.667 175 3.260 165 4.344

255 2.740 180 3.360 170 4.419

260 2.813 185 3.460 175 4.493

265 2.887 190 3.521 180 4.567

270 2.960 195 3.555 185 4.641

275 3.033 200 3.589 190 4.715

280 3.106 205 3.623 195 4.789

285 3.179 210 3.658 200 4.863

290 3.252 215 3.692 205 4.937

295 3.325 220 3.726

300 3.398 225 3.761

305 3.471 230 3.795

310 3.511 235 3.829

315 3.530 240 3.863

320 3.549 245 3.898

325 3.568 250 3.932

330 3.587 255 3.966

260 4.001

265 4.035

270 4.069

275 4.103

280 4.138

285 4.172

290 4.206

295 4.241

300 4.275

305 4.309

310 4.343

315 4.378

320 4.412

325 4.446

330 4.481

30 minutes 45 minutes 60 minutes15 minutes





of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019


Table 13

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

330 0.877 145 0.877 65 0.877 50 1.210

150 0.942 70 0.955 55 1.375

155 1.009 75 1.034 60 1.540

160 1.077 80 1.113 65 1.705

165 1.145 85 1.192 70 1.870

170 1.212 90 1.271 75 2.035

175 1.280 95 1.349 80 2.200

180 1.348 100 1.428 85 2.335

185 1.415 105 1.507 90 2.471

190 1.483 110 1.586 95 2.606

195 1.551 115 1.664 100 2.742

200 1.618 120 1.743 105 2.877

205 1.686 125 1.822 110 3.013

210 1.754 130 1.901 115 3.148

215 1.821 135 1.979 120 3.283

220 1.889 140 2.058 125 3.419

225 1.956 145 2.137 130 3.522

230 2.024 150 2.220 135 3.579

235 2.092 155 2.320 140 3.635

240 2.159 160 2.420 145 3.691

245 2.222 165 2.520 150 3.747

250 2.278 170 2.620 155 3.803

255 2.333 175 2.720 160 3.859

260 2.389 180 2.820 165 3.915

265 2.444 185 2.920 170 3.971

270 2.500 190 3.020 175 4.027

275 2.556 195 3.120 180 4.083

280 2.611 200 3.220 185 4.139

285 2.667 205 3.320 190 4.195

290 2.722 210 3.420 195 4.251

295 2.778 215 3.507 200 4.307

300 2.833 220 3.539 205 4.364

305 2.889 225 3.572 210 4.420

310 2.944 230 3.605 215 4.476

315 3.000 235 3.638 220 4.532

320 3.056 240 3.670 225 4.588

325 3.111 245 3.703 230 4.644

330 3.167 250 3.736 235 4.700

255 3.769 240 4.756

260 3.802 245 4.812

265 3.834 250 4.868

270 3.867 255 4.924

275 3.900

280 3.933

285 3.966

290 3.998

295 4.031

300 4.064

305 4.097

310 4.130

315 4.162

320 4.195

325 4.228

330 4.261



60 minutes




of 16 Signed C/012

Issued: 9th


th December 2015

Valid to: 30th

June 2019


Table 14

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

Section

Factor up to

m-1

Thickness

mm

330 0.877 150 0.877 75 0.877 50 1.173

155 0.930 80 1.050 55 1.339

160 0.997 85 1.124 60 1.504

165 1.063 90 1.197 65 1.670

170 1.130 95 1.271 70 1.836

175 1.197 100 1.345 75 2.001

180 1.264 105 1.419 80 2.167

185 1.331 110 1.492 85 2.300

190 1.398 115 1.566 90 2.425

195 1.465 120 1.640 95 2.550

200 1.531 125 1.713 100 2.675

205 1.598 130 1.787 105 2.800

210 1.665 135 1.861 110 2.925

215 1.732 140 1.935 115 3.050

220 1.799 145 2.008 120 3.175

225 1.866 150 2.082 125 3.300

230 1.933 155 2.156 130 3.425

235 1.999 160 2.243 135 3.521

240 2.066 165 2.349 140 3.572

245 2.133 170 2.456 145 3.623

250 2.200 175 2.562 150 3.674

255 2.254 180 2.669 155 3.726

260 2.308 185 2.775 160 3.777

265 2.363 190 2.882 165 3.828

270 2.417 195 2.989 170 3.879

275 2.471 200 3.095 175 3.931

280 2.525 205 3.202 180 3.982

285 2.579 210 3.308 185 4.033

290 2.633 215 3.415 190 4.085

295 2.688 220 3.506 195 4.136

300 2.742 225 3.538 200 4.187

305 2.796 230 3.570 205 4.238

310 2.850 235 3.602 210 4.290

315 2.904 240 3.634 215 4.341

320 2.958 245 3.666 220 4.392

325 3.013 250 3.698 225 4.444

330 3.067 255 3.730 230 4.495

260 3.762 235 4.546

265 3.794 240 4.597

270 3.826 245 4.649

275 3.857 250 4.700

280 3.889 255 4.751

285 3.921 260 4.803

290 3.953 265 4.854

295 3.985 270 4.905

300 4.017 275 4.956

305 4.049

310 4.081

315 4.113

320 4.145

325 4.177

330 4.209



15 minutes


certificate of approval no cf 821... · this certificate is the property of warrington...

Documents