ceramic disk faucet - mission air conditioninghow to fix a leaky ceramic˜disk faucet leaky faucets...

1
HOW TO FIX A LEAKY CERAMIC-DISK FAUCET Leaky faucets are usually easy to fix. Below you will find the steps and tips to find the problem and fix it. If the disk is cracked or scratched in any way it needs to be replaced. 1. Remove the escutcheon cap. Aſter unscrewing and removing the handle, locate the escutcheon, which sits directly beneath the handle and is usually made of metal. 2. Unscrew and remove the disk cylinder. This will expose several neoprene seals on the underside. 3. Pry out the seals and clean the cylinders. White vinegar would work well for this purpose, especially if you have hard water. Soak them for several hours to work out the build-up and then assess whether or not they're reusable. 4. Replace the seals if necessary. If they look pied, frayed, thin, or otherwise worn – or if you simply want to play it safe – bring them into the hardware store to find exact replacements. 5. Reassemble the handle and very slowly turn the water on. Running the water too forcefully can crack the ceramic disk. CERAMIC-DISK FAUCET Cap Handle Cartridge Seals WHY PAY A PLUMBER WHEN YOU CAN FIX A LEAKY FAUCET YOURSELF? • 1/8-inch Allen wrench • Needle-nose pliers • Tongue-and-groove pliers • Screwdriver • Replacement parts Call us Today (713) 597-5594 www.missionac.com TACLB00051004E M-41760 Regulated by the Texas Department of Licensing and Regulation PO Box 12157, Austin TX 78711, 1-800-803-9202, 512-463-6599 Robert Koster M-41760 is licensed by the Texas State Board of Plumbing Examiners, P.O. Box 4200, Austin, TX 78765 (800) 845-6584 Align the pieces & take a photo When removing the faucet pieces, align them in order of how you take them out. Then take a picture of the pieces for later reference. Use a Faucet Kit Instead of only changing the damage piece, we highly recommend to buy a faucet kit and replace everything. Per example, if you are replacing a worn-out washer from a compression faucet, most likely, the 2nd washer may start having issues soon. Cover the drain Small pieces can fall inside the drain. To prevent this, cover the drain hole with a towel. WHAT YOU’LL NEED TIPS

Upload: others

Post on 01-Mar-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Ceramic Disk Faucet - Mission Air ConditioningHOW TO FIX A LEAKY CERAMIC˜DISK FAUCET Leaky faucets are usually easy to ˜x. Below you will ˜nd the steps and tips to ˜nd the problem

HOW TO FIX A LEAKYCERAMIC-DISK FAUCET

Leaky faucets are usually easy to �x. Below you will �nd the steps andtips to �nd the problem and �x it.

If the disk is cracked or scratched in any way it needs to be replaced.

1. Remove the escutcheon cap. A�er unscrewing and removing the handle, locate the escutcheon,

which sits directly beneath the handle and is usually made of metal.

2. Unscrew and remove the disk cylinder. This will expose several neoprene seals on the underside.

3. Pry out the seals and clean the cylinders. White vinegar would work well for this purpose, especially

if you have hard water. Soak them for several hours to work out the build-up and then assess whether or

not they're reusable.

4. Replace the seals if necessary. If they look pi�ed, frayed, thin, or otherwise worn – or if you simply

want to play it safe – bring them into the hardware store to find exact replacements.

5. Reassemble the handle and very slowly turn the water on. Running the water too forcefully can

crack the ceramic disk.

CERAMIC-DISK FAUCET

Cap

Handle

Cartridge

Seals

WHY PAY A PLUMBER WHEN YOU CANFIX A LEAKY FAUCET YOURSELF?

• 1/8-inch Allen wrench• Needle-nose pliers• Tongue-and-groove pliers

• Screwdriver• Replacement parts

Call us Today(713) 597-5594

www.missionac.com

TACLB00051004E M-41760Regulated by the Texas Department of Licensing and Regulation PO Box 12157, Austin TX 78711, 1-800-803-9202, 512-463-6599

Robert Koster M-41760 is licensed by the Texas State Board of Plumbing Examiners, P.O. Box 4200, Austin, TX 78765 (800) 845-6584

Align the pieces & take a photoWhen removing the faucet pieces, align them in order of how you takethem out. Then take a picture of the pieces for later reference.

Use a Faucet KitInstead of only changing the damage piece, we highly recommend to buy a faucet kit and replaceeverything. Per example, if you are replacing a worn-out washer from a compression faucet,most likely, the 2nd washer may start having issues soon.

Cover the drainSmall pieces can fall inside the drain. To prevent this, cover the drain holewith a towel.

WHAT YOU’LL NEED

TIPS