centurion scale “temporary install” the scale to be shown is a b-tek centurion scale “flat...
TRANSCRIPT
Centurion Scale “temporary install”
• The scale to be shown is a B-tek Centurion Scale “Flat top” design with a steel deck
• Platform is 84’x11’ mounted temporary in the parking lot
• Temporary gravel approaches and our door mounted indicator and printer with wireless transmission to a remote printer.
• The scale is a modular design with (3) - 24’ modules and (1) - 12’ module.
• Features:• 100 % digital load cells that are
in stainless steel cans.
• 75K load cells, (10) in the entire scale.
• 10” I-Beams with a 3/8” steel deck
• Very clean design with easy access to the components under the deck..
• 5 year “End wall to End wall” Warranty
Layout of scale elevation
• Leveling of Bulk heads at each end of the scale
• Marking of the load plates
Preparing to set the scale
• Dummy cells mounted to the load plates, crane will set the scale.
• Scale is pre assembled laying on the ground to the left.
Scale Placement
• Scale has been placed on the dummy cells
• Excavated material has been placed behind bulk head for fill
Installation of load cells
• Shows gravel approaches installed
• Replacing the dummy load cells with the actual load cells
Completed Installation
• Scale installed, electronics mounted in the sealed box to the right of the scale.
• Good look at the 6’ retaining blocks holding the gravel in place.
Outdoor Electronics package
• Scale readout and printer mounted in a insulted enclosure with visor.
• Notice the box at the top of the pole is a data transmitter to a remote printer in the scale office.