centrifugal chiller - johnson controls-hitachi air conditioning · 2018. 10. 24. · continuous oil...
TRANSCRIPT
-
CentrifugalChiller High EfficiencyGFG-S/SIT Series
GXG-S/SIT SeriesGSG-S/SIT Series
G700DLV
Printed in Japan (H) MR-E070P Mar. 2017
http://www.jci-hitachi.com
-
High-efficiency CompressorIncreased compressor efficiency
3 dimensional blade impeller (2 stages)
Optimally designed diffuser with vane
Low rotating speed compressor enables the use of low-loss bearing structure.
Semi-hermetic design
Hitachi High Efficiency Centrifugal Chillers realize world top-level high efficiency and downsizing thanks to the advanced technologies to optimize the design of compressors and heat-exchangers. Several series of product lineup and flexible model selection satisfy huge variety of customers’ demand such as energy saving, space saving, etc. In addition, Hitachi’s unique technologies accumulated through over 80-year history ensure long term stable operation.
Centrifugal Chiller
Advantages
Our Key Technologies Realizing High-Efficiency.
Excellent Energy-Saving EffectFirst class efficiency greatly contributes energy saving of users.
Compact DesignSignificantly compact and light weight design enables space saving and easy replacement.
High ReliabilityHitachi’s unique technologies enhance high reliability and long term stable operation.
Global Warming PreventionEnergy saving by high-efficiency centrifugal chillers
Global warming refers to the phenomenon of global rising in average atmospheric temperatures due to increased volume of CO2 and methane as a result of burning fossil fuels such as petroleum and coal. The 1995 IPCC* Report predicted that if the emission of CO2, etc. continued as it was, the atmospheric temperature would rise by as much as 2˚C by the end of the 21st century and, as a result, the sea level would rise by approximately 50 cm from the present level. In such circumstances, it is even more important to save the energy consumed by air conditioners in order to cut CO2 emission. * IPCC: Intergovernmental Panel on Climate Change
High-efficiency Refrigerant CycleIncreased refrigerating cycle efficiency
2 stages compression cycle with economizer
High-performance Heat ExchangerIncreased efficiency resulted from improved
performance of heat exchanger
Employment of high-performance heat exchange tubes.
Optimal structural design of heat exchanger to match
the behavior of refrigerant.
Featuring Ozone-safe
HFC134a
Max. COP7.0
Achieved
High Efficiency Centrifugal Chiller ■ HC-F-GFG-SSC Series (Super High Efficiency Type) ■ HC-F-GXG-S Series (High Efficiency Type) ■ HC-F-GSG-S Series (Compact Type) 1,055~7,032kW (300~2,000USRT)
High Efficiency Inverter Controlled Centrifugal Chiller ■ HC-F-GFG-SITSC Series (Super High Efficiency Type) ■ HC-F-GXG-SIT Series (High Efficiency Type) ■ HC-F-GSG-SIT Series (Compact Type) 1,055~4,922kW (300~1,400USRT)
*Capacity can be extended up to max. 2,500USRT with single compressor.
1 2
-
High-efficiency CompressorIncreased compressor efficiency
3 dimensional blade impeller (2 stages)
Optimally designed diffuser with vane
Low rotating speed compressor enables the use of low-loss bearing structure.
Semi-hermetic design
Hitachi High Efficiency Centrifugal Chillers realize world top-level high efficiency and downsizing thanks to the advanced technologies to optimize the design of compressors and heat-exchangers. Several series of product lineup and flexible model selection satisfy huge variety of customers’ demand such as energy saving, space saving, etc. In addition, Hitachi’s unique technologies accumulated through over 80-year history ensure long term stable operation.
Centrifugal Chiller
Advantages
Our Key Technologies Realizing High-Efficiency.
Excellent Energy-Saving EffectFirst class efficiency greatly contributes energy saving of users.
Compact DesignSignificantly compact and light weight design enables space saving and easy replacement.
High ReliabilityHitachi’s unique technologies enhance high reliability and long term stable operation.
Global Warming PreventionEnergy saving by high-efficiency centrifugal chillers
Global warming refers to the phenomenon of global rising in average atmospheric temperatures due to increased volume of CO2 and methane as a result of burning fossil fuels such as petroleum and coal. The 1995 IPCC* Report predicted that if the emission of CO2, etc. continued as it was, the atmospheric temperature would rise by as much as 2˚C by the end of the 21st century and, as a result, the sea level would rise by approximately 50 cm from the present level. In such circumstances, it is even more important to save the energy consumed by air conditioners in order to cut CO2 emission. * IPCC: Intergovernmental Panel on Climate Change
High-efficiency Refrigerant CycleIncreased refrigerating cycle efficiency
2 stages compression cycle with economizer
High-performance Heat ExchangerIncreased efficiency resulted from improved
performance of heat exchanger
Employment of high-performance heat exchange tubes.
Optimal structural design of heat exchanger to match
the behavior of refrigerant.
Featuring Ozone-safe
HFC134a
Max. COP7.0
Achieved
High Efficiency Centrifugal Chiller ■ HC-F-GFG-SSC Series (Super High Efficiency Type) ■ HC-F-GXG-S Series (High Efficiency Type) ■ HC-F-GSG-S Series (Compact Type) 1,055~7,032kW (300~2,000USRT)
High Efficiency Inverter Controlled Centrifugal Chiller ■ HC-F-GFG-SITSC Series (Super High Efficiency Type) ■ HC-F-GXG-SIT Series (High Efficiency Type) ■ HC-F-GSG-SIT Series (Compact Type) 1,055~4,922kW (300~1,400USRT)
*Capacity can be extended up to max. 2,500USRT with single compressor.
1 2
-
3 4
Advantages
● Lubrication Oil Supplying System
Lubricating oil
Oil strainer
Oil cooler (Cooled by the refrigerant)
Oil heater
Oil pump Bearing
Refrigerant liquid from the condenser
Refrigerant gas to the evaporator
Oil tank
for the prevention of dissolving refrigerant into the oil when the machine stops.
Cool
ing
capa
city
(%)
Alarm
30 32 34
50
100
OperatingRangeIncrease
Rated point
Cooling water inlet temperature (ºC)
Before stopping due to “High Pressure Cut”, an alarm signals to activate the pressure limit control prevention control function to continue operation.
Top-class Compact Design and Light Weight Design The compact design greatly improves flexibility in installation. Realizing space saving of machine room. Easy carry-in to machine room. Suitable for replacement of long-operating chillers. Significant reduction of refrigerant volume.
New Type EconomizerImprovement of vapor-liquid separation performance and significant downsizing are realized by the use of Newly-developed economizer. (cyclonic system)
Easy Operation with Touch Panel Type Control Panel 10.4 inch color touch panel screen Monitor various operating data Indicate trend graph during operation Trend data for max. 40 hours. (Updated every 1 hour) Indicate and store operation history for the past 12 hours (Updated every hour) Indicate and store failure and alarm history (latest 6 times each) Show Handling Guide in case of failure Automatic restart function after instantaneous power failure (Option) Multilingual Languages Indication (Japanese, English, Chinese [Simplified, Traditional], Portuguese) Download 3-month operation date to USB memory
Conventional Model GXG-S Series
GXG-S Series
Conventional Model
GXG-S Series
Conventional Model
GXG-S Series
Conventional Model
2-stage Compression CycleTo improve compressor efficiency, refrigerant economizer is added with 2-stage compressor equipped with 2 impellers, as shown in the drawing below. In this case, the refrigerant goes through two expansion devices. When the refrigerant goes through the first device, some of the refrigerant flashes, or become a gas. The flashed refrigerant is introduced to the compressor between the two stages. In the one-stage compressor cycle without the econo-mizer, all refrigerant flows in the cycle. Comparatively, in the 2-stage compressor cycle the part of the refrigerant is bypassed from the economizer to the 2-stage impeller.
● 2-stage Centrifugal Chiller Cycle
● Comparison of Chiller Size (Comparison of 1000RT models)
Installation Space Operating Weight Refrigerant Volume
Two-phase refrigerant
Refrigerant gas
Refrigerant liquid
500031504550
2400
100%69%
100% 100%
58% 53%
Approx.31%Reduction
Approx.42%Reduction Approx.47%
Reduction
Approx.31%Reduction
Approx.42%Reduction Approx.47%
Reduction
Com
pres
sor
com
pres
sion
rat
io
● Compressor characteristic comparison
Flowrate (cooling capacity)
ARI temp. condition chillerHitachi
JIS cooling water temp. standard
ARI cooling water temperature standard
* Surging phenomenon tends to occur for ARI temperature condition chillers
Load100%75%50%25%0%
JIS32˚C
30.75˚C29.5˚C28.25˚C
27˚C
ARI29.4˚C23.9˚C18.3˚C18.3˚C18.3˚C
Surging margin
* This figure shows general characteristics and does not provide any guarantees as to the performance.
Surging
Operation screen Trend data screen
Failure screen Handling guide screen
Compatible with BMSChiller control panel is equipped with RS485 communication port and compatible with Building Management System through MODBUS RTU protocol.
Quick automatic restart after power failure.Chiller automatically starts up after instantaneous power failure (less than 10 sec.) and reverts to normal operation in shortest period.
● Min. cooling water temperature 12˚C (GFG/GXG), and 15˚C (GSG)● Thermal insulation ● Spring isolator● Max. working pressure up to 2.5Mpa● Ball type automatic tube cleaning system for chilled & cooling water● Chilled & cooling water variable flow control● Marine type water box / Hinged type water box● Min. cooling capacity 10% (with hot gas bypass)● Large temperature difference (to reduce the water flow rate)● Delivery in knockdown form (4 pieces-compressor, heat exchangers, economizer, control panel, 5 pieces-evaporator & condenser is also separated.)● Soft starter (for low voltage)
High Reliability Lubrication SystemDirect refrigerant cooling of lubrication oil in oil cooler without cooling water piping increases reliability.
Surge ProtectionAdopting strict criteria specified in JIS for stable operation under high cooling water temperature. 3D 2-stage impeller enables stable operation even at low cooling load or high cooling water inlet temp. which prevents occurrence of surge.
Wider Operating RangeStable operation continues even when rise of condenser pressure due to cooling water temperature in hot summer and/ or proceeding of tube fouling.
Other Unique Feature to Enhance Reliability● Key-free impeller coupling system● Accurate chilled water temperature control within ±0.2˚C● Low noise and longer bearing life due to lower rotation speed of 2-stage compression cycle.
● Continuous oil recovery with automatic refrigerant cleaner● Prevention of oil degradation by removing residual water with filter dryer
Operational Item & Function
● Example of rising cooling water temperature due to rising ambient temperature
CompressorPower source
Condenser
Coolingwater
Orifice
Low press.low temp.suction gas
High press.high temp.discharge gas
Evaporator
Chilled water
EconomizerEconomizer
-
3 4
Advantages
● Lubrication Oil Supplying System
Lubricating oil
Oil strainer
Oil cooler (Cooled by the refrigerant)
Oil heater
Oil pump Bearing
Refrigerant liquid from the condenser
Refrigerant gas to the evaporator
Oil tank
for the prevention of dissolving refrigerant into the oil when the machine stops.
Cool
ing
capa
city
(%)
Alarm
30 32 34
50
100
OperatingRangeIncrease
Rated point
Cooling water inlet temperature (ºC)
Before stopping due to “High Pressure Cut”, an alarm signals to activate the pressure limit control prevention control function to continue operation.
Top-class Compact Design and Light Weight Design The compact design greatly improves flexibility in installation. Realizing space saving of machine room. Easy carry-in to machine room. Suitable for replacement of long-operating chillers. Significant reduction of refrigerant volume.
New Type EconomizerImprovement of vapor-liquid separation performance and significant downsizing are realized by the use of Newly-developed economizer. (cyclonic system)
Easy Operation with Touch Panel Type Control Panel 10.4 inch color touch panel screen Monitor various operating data Indicate trend graph during operation Trend data for max. 40 hours. (Updated every 1 hour) Indicate and store operation history for the past 12 hours (Updated every hour) Indicate and store failure and alarm history (latest 6 times each) Show Handling Guide in case of failure Automatic restart function after instantaneous power failure (Option) Multilingual Languages Indication (Japanese, English, Chinese [Simplified, Traditional], Portuguese) Download 3-month operation date to USB memory
Conventional Model GXG-S Series
GXG-S Series
Conventional Model
GXG-S Series
Conventional Model
GXG-S Series
Conventional Model
2-stage Compression CycleTo improve compressor efficiency, refrigerant economizer is added with 2-stage compressor equipped with 2 impellers, as shown in the drawing below. In this case, the refrigerant goes through two expansion devices. When the refrigerant goes through the first device, some of the refrigerant flashes, or become a gas. The flashed refrigerant is introduced to the compressor between the two stages. In the one-stage compressor cycle without the econo-mizer, all refrigerant flows in the cycle. Comparatively, in the 2-stage compressor cycle the part of the refrigerant is bypassed from the economizer to the 2-stage impeller.
● 2-stage Centrifugal Chiller Cycle
● Comparison of Chiller Size (Comparison of 1000RT models)
Installation Space Operating Weight Refrigerant Volume
Two-phase refrigerant
Refrigerant gas
Refrigerant liquid
500031504550
2400
100%69%
100% 100%
58% 53%
Approx.31%Reduction
Approx.42%Reduction Approx.47%
Reduction
Approx.31%Reduction
Approx.42%Reduction Approx.47%
Reduction
Com
pres
sor
com
pres
sion
rat
io
● Compressor characteristic comparison
Flowrate (cooling capacity)
ARI temp. condition chillerHitachi
JIS cooling water temp. standard
ARI cooling water temperature standard
* Surging phenomenon tends to occur for ARI temperature condition chillers
Load100%75%50%25%0%
JIS32˚C
30.75˚C29.5˚C28.25˚C
27˚C
ARI29.4˚C23.9˚C18.3˚C18.3˚C18.3˚C
Surging margin
* This figure shows general characteristics and does not provide any guarantees as to the performance.
Surging
Operation screen Trend data screen
Failure screen Handling guide screen
Compatible with BMSChiller control panel is equipped with RS485 communication port and compatible with Building Management System through MODBUS RTU protocol.
Quick automatic restart after power failure.Chiller automatically starts up after instantaneous power failure (less than 10 sec.) and reverts to normal operation in shortest period.
● Min. cooling water temperature 12˚C (GFG/GXG), and 15˚C (GSG)● Thermal insulation ● Spring isolator● Max. working pressure up to 2.5Mpa● Ball type automatic tube cleaning system for chilled & cooling water● Chilled & cooling water variable flow control● Marine type water box / Hinged type water box● Min. cooling capacity 10% (with hot gas bypass)● Large temperature difference (to reduce the water flow rate)● Delivery in knockdown form (4 pieces-compressor, heat exchangers, economizer, control panel, 5 pieces-evaporator & condenser is also separated.)● Soft starter (for low voltage)
High Reliability Lubrication SystemDirect refrigerant cooling of lubrication oil in oil cooler without cooling water piping increases reliability.
Surge ProtectionAdopting strict criteria specified in JIS for stable operation under high cooling water temperature. 3D 2-stage impeller enables stable operation even at low cooling load or high cooling water inlet temp. which prevents occurrence of surge.
Wider Operating RangeStable operation continues even when rise of condenser pressure due to cooling water temperature in hot summer and/ or proceeding of tube fouling.
Other Unique Feature to Enhance Reliability● Key-free impeller coupling system● Accurate chilled water temperature control within ±0.2˚C● Low noise and longer bearing life due to lower rotation speed of 2-stage compression cycle.● Continuous oil recovery with automatic refrigerant cleaner● Prevention of oil degradation by removing residual water with filter dryer
Operational Item & Function
● Example of rising cooling water temperature due to rising ambient temperature
CompressorPower source
Condenser
Coolingwater
Orifice
Low press.low temp.suction gas
High press.high temp.discharge gas
Evaporator
Chilled water
EconomizerEconomizer
-
COP during winter season is improved to maximum 330%.GFG-SIT/GXG-SIT/GSG-SIT Series can be operated stably even in the very low cooling water temperature. In accordance with the cooling water temperature by seasons, the chillers can maintain highly efficient operation with variable speed control of compressor. Therefore, the chillers are recommended for the customers who need the cooling operation throughout the year.
● COP Characteristics throughout the year
Excellent COP at Partial LoadVarious technologies such as newly developed high efficiency econo-mizer (cyclonic system), etc. enabled drastic improvement of the efficiency at partial load with low cooling water temperature.Improvement of the oil supply temperature control and the automatic oil recovery enables extension of the motor speed control range at low cooling water inlet temperature.
Max. Partial Load
COP 22.4IPLV 11.5
Excellent Efficiency throughout the Year
High Efficiency2-stage Compressor
Cool
ing
Wat
er In
let
Tem
p. (˚
C)
Cooling Capacity (%)
35
30
25
20
15
1020 40 60 80 100
Motor SpeedControl+ Vane Control
Motor SpeedControl
Extension ofControl Range
Efficiency is improved by minimizing usage of vane control
25
20
15
10
5
01 2 3 4 5 6 7 8 9 10 11 12
10
20
30
COP
Month
Cool
ing
Wat
er In
let
Tem
p. (˚
C)
Cooling Water Temp.
Inverter Control System
Constant Speed SystemCOP approx.330%
High EfficiencyHeat Exchangers
“Energy Saving Mode” Operation (Peak Cut Operation) (option)
Once the target motor power consumption is set, the chiller is automati-cally controlled by the motor speed, the inlet guide vane opening and the chilled water outlet tempera-ture rise. This control is extremely useful for the energy saving especially in the off-peak season when the motor speed is easily decreased.
“Eco Mode” Operation (Chilled Water Inlet Temp. Control)The chiller is usually controlled so the chilled water outlet temperature to be constant. This "Eco Mode" operation introduces the inlet temperature control, where the chilled water inlet temperature is controlled to be constant. The outlet temperature rises a bit but this is enough for the off-peak season air conditioning.
Cooling Water Variable Flow Operation (option)
When the cooling water variable flow control is applied, the cooling water flow rate is automatically calculated so the total power consumption of the compressor motor and the cooling water pump motor becomes minimum.
Hermonic Filter (option)
Harmonic filter is available to comply the requirement of IEEE 519.
● Comparison of Characteristics between CHW Outlet/Inlet Temp. Control
● Energy Saving Mode Setting Screen
● Characteristics of Cooling Water Variable Flow Operation
20 40 60 80 100
25
20
15
10
5
0
COP
Cooling Capacity (%)
CW InletTemp.
16˚C
20˚C
24˚C
28˚C
COP is improved drastically when cooling load decreases.
COP : approx. 40% Increase
CHW Inlet Temp. ControlCHW Outlet Temp. Control
Energy & Power Saving Operation Functions
Low
Low
Cooling Water flow High
High Minimum Power Consumption
Total Power Consumption(Centrifugal chiller + Cooling Water Pump)
Power Consumption of Centrifugal Chiller
Power Consumption of Cooling Water Pump
PowerConsumption
*GFG-SITSC model
Improvement of the Oil Supply Temperature ControlWhen the compressor rotation speed is low, the friction heat generated at bearings decreases. Therefore, refrigerant flow to oil cooler is controlled to keep the oil temperature property.
Lubricating oil
Oil strainerOil cooler (Cooled by the refrigerant)
Oil heater
Oil pump
Bearing
Refrigerant liquid from the condenser
Electric Valve to Control Oil Temp.
Refrigerant gas to the evaporator
Oil tank
M
25
20
15
10
5
020 40 60 80 100
COP
Cooling Capacity (%)
12˚C
CW InletTemp.
16˚C
20˚C24˚C28˚C
Max. Partial Load
COP 22.4COP is improved by theReduction of Motor Speed
1
Hitachi High Efficiency Inverter Controlled Centrifugal Chiller
Advantages
Hitachi High Efficiency Inverter-controlled Centrifugal Chillers realize energy-saving operation through out the year utilizing variable motor speed control with inverter unit, drastically improving partial load efficiency under low cooling water temperature
condition in off-peak seasons. In addition, the chillers have many unique energy saving functions which satisfy the demand to minimize the energy consump-tion.
5 6
-
COP during winter season is improved to maximum 330%.GFG-SIT/GXG-SIT/GSG-SIT Series can be operated stably even in the very low cooling water temperature. In accordance with the cooling water temperature by seasons, the chillers can maintain highly efficient operation with variable speed control of compressor. Therefore, the chillers are recommended for the customers who need the cooling operation throughout the year.
● COP Characteristics throughout the year
Excellent COP at Partial LoadVarious technologies such as newly developed high efficiency econo-mizer (cyclonic system), etc. enabled drastic improvement of the efficiency at partial load with low cooling water temperature.Improvement of the oil supply temperature control and the automatic oil recovery enables extension of the motor speed control range at low cooling water inlet temperature.
Max. Partial Load
COP 22.4IPLV 11.5
Excellent Efficiency throughout the Year
High Efficiency2-stage Compressor
Cool
ing
Wat
er In
let
Tem
p. (˚
C)
Cooling Capacity (%)
35
30
25
20
15
1020 40 60 80 100
Motor SpeedControl+ Vane Control
Motor SpeedControl
Extension ofControl Range
Efficiency is improved by minimizing usage of vane control
25
20
15
10
5
01 2 3 4 5 6 7 8 9 10 11 12
10
20
30
COP
Month
Cool
ing
Wat
er In
let
Tem
p. (˚
C)
Cooling Water Temp.
Inverter Control System
Constant Speed SystemCOP approx.330%
High EfficiencyHeat Exchangers
“Energy Saving Mode” Operation (Peak Cut Operation) (option)
Once the target motor power consumption is set, the chiller is automati-cally controlled by the motor speed, the inlet guide vane opening and the chilled water outlet tempera-ture rise. This control is extremely useful for the energy saving especially in the off-peak season when the motor speed is easily decreased.
“Eco Mode” Operation (Chilled Water Inlet Temp. Control)The chiller is usually controlled so the chilled water outlet temperature to be constant. This "Eco Mode" operation introduces the inlet temperature control, where the chilled water inlet temperature is controlled to be constant. The outlet temperature rises a bit but this is enough for the off-peak season air conditioning.
Cooling Water Variable Flow Operation (option)
When the cooling water variable flow control is applied, the cooling water flow rate is automatically calculated so the total power consumption of the compressor motor and the cooling water pump motor becomes minimum.
Hermonic Filter (option)
Harmonic filter is available to comply the requirement of IEEE 519.
● Comparison of Characteristics between CHW Outlet/Inlet Temp. Control
● Energy Saving Mode Setting Screen
● Characteristics of Cooling Water Variable Flow Operation
20 40 60 80 100
25
20
15
10
5
0
COP
Cooling Capacity (%)
CW InletTemp.
16˚C
20˚C
24˚C
28˚C
COP is improved drastically when cooling load decreases.
COP : approx. 40% Increase
CHW Inlet Temp. ControlCHW Outlet Temp. Control
Energy & Power Saving Operation Functions
Low
Low
Cooling Water flow High
High Minimum Power Consumption
Total Power Consumption(Centrifugal chiller + Cooling Water Pump)
Power Consumption of Centrifugal Chiller
Power Consumption of Cooling Water Pump
PowerConsumption
*GFG-SITSC model
Improvement of the Oil Supply Temperature ControlWhen the compressor rotation speed is low, the friction heat generated at bearings decreases. Therefore, refrigerant flow to oil cooler is controlled to keep the oil temperature property.
Lubricating oil
Oil strainerOil cooler (Cooled by the refrigerant)
Oil heater
Oil pump
Bearing
Refrigerant liquid from the condenser
Electric Valve to Control Oil Temp.
Refrigerant gas to the evaporator
Oil tank
M
25
20
15
10
5
020 40 60 80 100
COP
Cooling Capacity (%)
12˚C
CW InletTemp.
16˚C
20˚C24˚C28˚C
Max. Partial Load
COP 22.4COP is improved by theReduction of Motor Speed
1
Hitachi High Efficiency Inverter Controlled Centrifugal Chiller
Advantages
Hitachi High Efficiency Inverter-controlled Centrifugal Chillers realize energy-saving operation through out the year utilizing variable motor speed control with inverter unit, drastically improving partial load efficiency under low cooling water temperature
condition in off-peak seasons. In addition, the chillers have many unique energy saving functions which satisfy the demand to minimize the energy consump-tion.
5 6
-
7 8
Model
5.15 - 6.16 5.15 - 6.16 5.35 - 6.40 5.36 - 6.415.58 - 6.68 5.62 - 6.72 5.70 - 6.82 5.63 - 6.73 5.59 - 6.69 5.65 - 6.75 5.74 - 6.86 5.59 - 6.69 5.65 - 6.75 5.66 - 6.77 5.81 - 6.94 5.74 - 6.86 5.78 - 6.91 5.79 - 6.92 5.83 - 6.97 5.84 - 6.99 5.85 - 7.00 5.86 - 7.01 5.89 - 7.04 5.74 - 6.86 5.77 - 6.90 5.69 - 6.81 5.73 - 6.85 5.77 - 6.90 5.84 - 6.99
3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,8504,8505,2505,2505,2505,250
1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,6003,3003,3003,5003,5003,5003,500
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,8002,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,9003,4003,4003,7003,7003,7003,700
3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,500
5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,00016,00020,50020,70023,70024,00024,20024,500
7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,60019,70024,30024,60027,50027,90028,20028,500
COPHeight (C)Width (B)Length (A)
Overall Dimension mm
■ HC-F_GXG-S
REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. * This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.) 4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water. 5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GXG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F900GXG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power: AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)
HC-F300GXG-SHC-F350GXG-SHC-F400GXG-SHC-F450GXG-SHC-F500GXG-SHC-F550GXG-SHC-F600GXG-SHC-F650GXG-SHC-F700GXG-SHC-F750GXG-SHC-F800GXG-SHC-F850GXG-SHC-F900GXG-SHC-F950GXG-SHC-F1000GXG-SHC-F1050GXG-SHC-F1100GXG-SHC-F1150GXG-SHC-F1200GXG-SHC-F1250GXG-SHC-F1300GXG-SHC-F1350GXG-SHC-F1400GXG-S
HC-F1500GXG-S (*1)HC-F1600GXG-S (*1)HC-F1700GXG-S (*1)HC-F1800GXG-S (*1)HC-F1900GXG-S (*1)HC-F2000GXG-S (*1)
300 - 349350 - 350351 - 449450 - 450451 - 549550 - 599600 - 649650 - 650651 - 749750 - 799800 - 800801 - 899900 - 949950 - 999
1,000 - 1,0001,001 - 1,0991,100 - 1,1491,150 - 1,1991,200 - 1,2491,250 - 1,2991,300 - 1,3491,350 - 1,3991,400 - 1,4001,401 - 1,5991,600 - 1,6001,601 - 1,7991,800 - 1,8991,900 - 1,9992,000 - 2,000
Model
5.68 - 6.795.69 - 6.805.73 - 6.855.75 - 6.885.82 - 6.965.83 - 6.985.88 - 7.035.92 - 7.085.82 - 6.965.87 - 7.025.92 - 7.085.94 - 7.105.93 - 7.095.92 - 7.085.96 - 7.125.96 - 7.125.98 - 7.156.00 - 7.176.03 - 7.216.03 - 7.226.09 - 7.296.09 - 7.286.10 - 7.29
4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050
1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900
6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000
3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500
7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400
COP Height (C) mm
ExtubationSpace
Width (B)mm
Length (A)mm
Overall Dimension
300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950
951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400
300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950
951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400
■HC-F_GFG-SSC
HC-F300GFG-SSCHC-F350GFG-SSCHC-F400GFG-SSCHC-F450GFG-SSCHC-F500GFG-SSCHC-F550GFG-SSCHC-F600GFG-SSCHC-F650GFG-SSCHC-F700GFG-SSCHC-F750GFG-SSCHC-F800GFG-SSCHC-F850GFG-SSCHC-F900GFG-SSCHC-F950GFG-SSCHC-F1000GFG-SSCHC-F1050GFG-SSCHC-F1100GFG-SSCHC-F1150GFG-SSCHC-F1200GFG-SSCHC-F1250GFG-SSCHC-F1300GFG-SSCHC-F1350GFG-SSCHC-F1400GFG-SSC
Model
5.57 - 6.665.58 - 6.685.61 - 6.715.65 - 6.755.71 - 6.835.73 - 6.855.77 - 6.905.81 - 6.945.71 - 6.835.76 - 6.895.80 - 6.935.82 - 6.965.81 - 6.945.81 - 6.945.83 - 6.975.84 - 6.995.86 - 7.015.88 - 7.035.91 - 7.065.92 - 7.075.97 - 7.145.97 - 7.145.98 - 7.15
6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000
7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400
COP Height (C) mm
ExtubationSpace
Width (B)mm
Length (A)mm
Overall Dimension
■HC-F_GFG-SITSC
4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050
1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900
3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500
HC-F300GFG-SITSCHC-F350GFG-SITSCHC-F400GFG-SITSCHC-F450GFG-SITSCHC-F500GFG-SITSCHC-F550GFG-SITSCHC-F600GFG-SITSCHC-F650GFG-SITSCHC-F700GFG-SITSCHC-F750GFG-SITSCHC-F800GFG-SITSCHC-F850GFG-SITSCHC-F900GFG-SITSCHC-F950GFG-SITSCHC-F1000GFG-SITSCHC-F1050GFG-SITSCHC-F1100GFG-SITSCHC-F1150GFG-SITSCHC-F1200GFG-SITSCHC-F1250GFG-SITSCHC-F1300GFG-SITSCHC-F1350GFG-SITSCHC-F1400GFG-SITSC
Cooling CapacityUSRT
Cooling CapacityUSRT
Model COP
Extubationspace
Operating Weightkg
Shipping Weightkg
Operating Weightkg
Shipping Weightkg
Operating Weightkg
Shipping Weightkg
Operating Weightkg
Shipping Weightkg
■ HC-F_GXG-SIT
HC-F300GXG-SITHC-F350GXG-SITHC-F400GXG-SITHC-F450GXG-SITHC-F500GXG-SITHC-F550GXG-SITHC-F600GXG-SITHC-F650GXG-SITHC-F700GXG-SITHC-F750GXG-SITHC-F800GXG-SITHC-F850GXG-SITHC-F900GXG-SITHC-F950GXG-SITHC-F1000GXG-SITHC-F1050GXG-SITHC-F1100GXG-SITHC-F1150GXG-SITHC-F1200GXG-SITHC-F1250GXG-SITHC-F1300GXG-SITHC-F1350GXG-SIT
300350400450451550600650651750800801900950
1,0001,0011,1001,1501,2001,2501,3001,350
3493994494505495996496507497998008999499991,0991,0991,1491,1991,2491,2991,3491,390
----------------------
----------------------
5.145.155.295.295.475.515.595.525.485.545.635.485.545.555.695.635.675.675.725.735.735.74
6.15 6.16 6.33 6.33 6.55 6.59 6.69 6.60 6.56 6.62 6.73 6.56 6.62 6.63 6.81 6.73 6.78 6.78 6.84 6.85 6.85 6.86
Extubationspace
3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,000
5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,000
7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,600
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,9002,9002,9002,9002,9002,900
Height (C)
1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,6002,6002,6002,6002,6002,600
Width (B)
3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,550
Length (A)
Overall Dimension mm
Model
■ Starter Panel (Open star-delta)
300 ~ 450500 ~ 600650 ~ 800850 ~ 10001050 ~ 1400
Length800800
1,0001,0001,500
Width600750800800
1,000
Height2,1001,7001,9002,2002,100
Dimensions (mm)
GFG-SSC
Model
■ Inverter Panel
300350 ~ 450500 ~ 650700 ~ 850900 ~ 1400
Length1,7001,9001,9002,1002,200
Width950950950950950
Height1,9001,9002,3002,3002,450
Dimensions (mm)
GFG-SITSC
Model
■ Starter Panel (Open star-delta)
300 ~ 450500 ~ 600650 ~ 800850 ~ 10001050 ~ 1400
Length800800
1,0001,0001,500
Width600750800800
1,000
Height2,1001,7001,9002,2002,100
Dimensions (mm)
GXG-S
Model
■ Inverter Panel
300350 ~ 450500 ~ 650700 ~ 850900 ~ 1350
Length1,7001,9001,9002,1002,200
Width950950950950950
Height1,9001,9002,3002,3002,450
Dimensions (mm)
GXG-SIT
Specifications
REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters.2. The above specifications are subject to change without notice for technical improvements. * This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GFG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F900GFG-S and above, only constant speed), AC, 50/60Hz, 3ph.6. Auxiliary power: AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)
Constant Speed
Inverter-controlled
Constant Speed
Inverter-controlled*1. Power sourse: High /Middle tension Standard starting method: Reactor
Cooling CapacityUSRT
Cooling CapacityUSRT
-
7 8
Model
5.15 - 6.16 5.15 - 6.16 5.35 - 6.40 5.36 - 6.415.58 - 6.68 5.62 - 6.72 5.70 - 6.82 5.63 - 6.73 5.59 - 6.69 5.65 - 6.75 5.74 - 6.86 5.59 - 6.69 5.65 - 6.75 5.66 - 6.77 5.81 - 6.94 5.74 - 6.86 5.78 - 6.91 5.79 - 6.92 5.83 - 6.97 5.84 - 6.99 5.85 - 7.00 5.86 - 7.01 5.89 - 7.04 5.74 - 6.86 5.77 - 6.90 5.69 - 6.81 5.73 - 6.85 5.77 - 6.90 5.84 - 6.99
3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,8504,8505,2505,2505,2505,250
1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,6003,3003,3003,5003,5003,5003,500
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,8002,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,9003,4003,4003,7003,7003,7003,700
3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,500
5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,00016,00020,50020,70023,70024,00024,20024,500
7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,60019,70024,30024,60027,50027,90028,20028,500
COPHeight (C)Width (B)Length (A)
Overall Dimension mm
■ HC-F_GXG-S
REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. * This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.) 4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water. 5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GXG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F900GXG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power: AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)
HC-F300GXG-SHC-F350GXG-SHC-F400GXG-SHC-F450GXG-SHC-F500GXG-SHC-F550GXG-SHC-F600GXG-SHC-F650GXG-SHC-F700GXG-SHC-F750GXG-SHC-F800GXG-SHC-F850GXG-SHC-F900GXG-SHC-F950GXG-SHC-F1000GXG-SHC-F1050GXG-SHC-F1100GXG-SHC-F1150GXG-SHC-F1200GXG-SHC-F1250GXG-SHC-F1300GXG-SHC-F1350GXG-SHC-F1400GXG-S
HC-F1500GXG-S (*1)HC-F1600GXG-S (*1)HC-F1700GXG-S (*1)HC-F1800GXG-S (*1)HC-F1900GXG-S (*1)HC-F2000GXG-S (*1)
300 - 349350 - 350351 - 449450 - 450451 - 549550 - 599600 - 649650 - 650651 - 749750 - 799800 - 800801 - 899900 - 949950 - 999
1,000 - 1,0001,001 - 1,0991,100 - 1,1491,150 - 1,1991,200 - 1,2491,250 - 1,2991,300 - 1,3491,350 - 1,3991,400 - 1,4001,401 - 1,5991,600 - 1,6001,601 - 1,7991,800 - 1,8991,900 - 1,9992,000 - 2,000
Model
5.68 - 6.795.69 - 6.805.73 - 6.855.75 - 6.885.82 - 6.965.83 - 6.985.88 - 7.035.92 - 7.085.82 - 6.965.87 - 7.025.92 - 7.085.94 - 7.105.93 - 7.095.92 - 7.085.96 - 7.125.96 - 7.125.98 - 7.156.00 - 7.176.03 - 7.216.03 - 7.226.09 - 7.296.09 - 7.286.10 - 7.29
4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050
1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900
6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000
3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500
7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400
COP Height (C) mm
ExtubationSpace
Width (B)mm
Length (A)mm
Overall Dimension
300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950
951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400
300 - 325326 - 350351 - 425426 - 450451 - 525526 - 550551 - 625626 - 650651 - 725726 - 750751 - 825826 - 850851 - 925926 - 950
951 - 1,0251,026 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2251,226 - 1,2751,276 - 1,3251,326 - 1,3751,376 - 1,400
■HC-F_GFG-SSC
HC-F300GFG-SSCHC-F350GFG-SSCHC-F400GFG-SSCHC-F450GFG-SSCHC-F500GFG-SSCHC-F550GFG-SSCHC-F600GFG-SSCHC-F650GFG-SSCHC-F700GFG-SSCHC-F750GFG-SSCHC-F800GFG-SSCHC-F850GFG-SSCHC-F900GFG-SSCHC-F950GFG-SSCHC-F1000GFG-SSCHC-F1050GFG-SSCHC-F1100GFG-SSCHC-F1150GFG-SSCHC-F1200GFG-SSCHC-F1250GFG-SSCHC-F1300GFG-SSCHC-F1350GFG-SSCHC-F1400GFG-SSC
Model
5.57 - 6.665.58 - 6.685.61 - 6.715.65 - 6.755.71 - 6.835.73 - 6.855.77 - 6.905.81 - 6.945.71 - 6.835.76 - 6.895.80 - 6.935.82 - 6.965.81 - 6.945.81 - 6.945.83 - 6.975.84 - 6.995.86 - 7.015.88 - 7.035.91 - 7.065.92 - 7.075.97 - 7.145.97 - 7.145.98 - 7.15
6,1006,1007,7007,7009,2009,2009,4009,40011,30011,30011,70011,70013,10013,10014,70014,70014,80015,70016,80016,80016,80017,00017,000
7,6007,0009,6009,70011,10011,20011,40011,60013,60013,70014,40014,50016,10016,20018,30018,40018,60019,70020,80020,90021,00021,30021,400
COP Height (C) mm
ExtubationSpace
Width (B)mm
Length (A)mm
Overall Dimension
■HC-F_GFG-SITSC
4,0504,0504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5504,5505,0505,0505,0505,0505,0505,0505,0505,0505,050
1,6501,6501,9001,9002,0002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,4002,6002,6002,6002,6002,6002,600
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,8002,9002,9002,9002,9002,9002,900
3,5003,5004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,0004,5004,5004,5004,5004,5004,5004,5004,5004,500
HC-F300GFG-SITSCHC-F350GFG-SITSCHC-F400GFG-SITSCHC-F450GFG-SITSCHC-F500GFG-SITSCHC-F550GFG-SITSCHC-F600GFG-SITSCHC-F650GFG-SITSCHC-F700GFG-SITSCHC-F750GFG-SITSCHC-F800GFG-SITSCHC-F850GFG-SITSCHC-F900GFG-SITSCHC-F950GFG-SITSCHC-F1000GFG-SITSCHC-F1050GFG-SITSCHC-F1100GFG-SITSCHC-F1150GFG-SITSCHC-F1200GFG-SITSCHC-F1250GFG-SITSCHC-F1300GFG-SITSCHC-F1350GFG-SITSCHC-F1400GFG-SITSC
Cooling CapacityUSRT
Cooling CapacityUSRT
Model COP
Extubationspace
Operating Weightkg
Shipping Weightkg
Operating Weightkg
Shipping Weightkg
Operating Weightkg
Shipping Weightkg
Operating Weightkg
Shipping Weightkg
■ HC-F_GXG-SIT
HC-F300GXG-SITHC-F350GXG-SITHC-F400GXG-SITHC-F450GXG-SITHC-F500GXG-SITHC-F550GXG-SITHC-F600GXG-SITHC-F650GXG-SITHC-F700GXG-SITHC-F750GXG-SITHC-F800GXG-SITHC-F850GXG-SITHC-F900GXG-SITHC-F950GXG-SITHC-F1000GXG-SITHC-F1050GXG-SITHC-F1100GXG-SITHC-F1150GXG-SITHC-F1200GXG-SITHC-F1250GXG-SITHC-F1300GXG-SITHC-F1350GXG-SIT
300350400450451550600650651750800801900950
1,0001,0011,1001,1501,2001,2501,3001,350
3493994494505495996496507497998008999499991,0991,0991,1491,1991,2491,2991,3491,390
----------------------
----------------------
5.145.155.295.295.475.515.595.525.485.545.635.485.545.555.695.635.675.675.725.735.735.74
6.15 6.16 6.33 6.33 6.55 6.59 6.69 6.60 6.56 6.62 6.73 6.56 6.62 6.63 6.81 6.73 6.78 6.78 6.84 6.85 6.85 6.86
Extubationspace
3,0003,0003,0003,0003,5003,5003,5003,5003,5003,5003,5003,5003,5003,5004,0004,0004,0004,0004,0004,0004,0004,000
5,8005,8007,0007,0008,4008,7008,9009,10010,70010,70011,10011,10012,40012,40013,90014,10014,30014,80015,80015,80015,80016,000
7,0007,1008,5008,6009,90010,40010,50010,90012,60012,70013,30013,40014,80014,90016,90017,20017,50018,10019,10019,20019,30019,600
2,2002,2002,4002,4002,4502,4502,4502,4502,6502,6502,6502,6502,8002,8002,8002,8002,9002,9002,9002,9002,9002,900
Height (C)
1,6501,6501,9001,9001,9002,0002,0002,0002,2502,2502,2502,2502,4002,4002,4002,4002,6002,6002,6002,6002,6002,600
Width (B)
3,5503,5503,5503,5504,0504,0504,0504,0504,0504,0504,0504,0504,0504,0504,5504,5504,5504,5504,5504,5504,5504,550
Length (A)
Overall Dimension mm
Model
■ Starter Panel (Open star-delta)
300 ~ 450500 ~ 600650 ~ 800850 ~ 10001050 ~ 1400
Length800800
1,0001,0001,500
Width600750800800
1,000
Height2,1001,7001,9002,2002,100
Dimensions (mm)
GFG-SSC
Model
■ Inverter Panel
300350 ~ 450500 ~ 650700 ~ 850900 ~ 1400
Length1,7001,9001,9002,1002,200
Width950950950950950
Height1,9001,9002,3002,3002,450
Dimensions (mm)
GFG-SITSC
Model
■ Starter Panel (Open star-delta)
300 ~ 450500 ~ 600650 ~ 800850 ~ 10001050 ~ 1400
Length800800
1,0001,0001,500
Width600750800800
1,000
Height2,1001,7001,9002,2002,100
Dimensions (mm)
GXG-S
Model
■ Inverter Panel
300350 ~ 450500 ~ 650700 ~ 850900 ~ 1350
Length1,7001,9001,9002,1002,200
Width950950950950950
Height1,9001,9002,3002,3002,450
Dimensions (mm)
GXG-SIT
Specifications
REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters.2. The above specifications are subject to change without notice for technical improvements. * This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1400GFG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F900GFG-S and above, only constant speed), AC, 50/60Hz, 3ph.6. Auxiliary power: AC 380V/50Hz/3φ/3W or 4W.7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)
Constant Speed
Inverter-controlled
Constant Speed
Inverter-controlled*1. Power sourse: High /Middle tension Standard starting method: Reactor
Cooling CapacityUSRT
Cooling CapacityUSRT
-
9 10
The following table shows the standard scope of supply, but the actual scope depends on the contract. Please consult with our sales staff or distributor.
Item
Main Equipment
Auxiliary Equipment
Coating
Out of Supply Scope
Standard Scope
Standard Scope of Supply
a b c d e f g h i
■Positional Dimension of Water Piping (unit: mm)Positional dimension of nozzleModel: HCF_GFG-SSC
HCF_GFG-SITSC
300, 350400, 450500, 550600, 650700 ~ 850900, 950
1000, 105011001150
1200 ~ 1400
673715734734810780780780858858
933975
1,0271,0271,1551,1601,1601,1601,2781,278
398442474494430455475495456456
616642695715730815835855836836
33101102102107139139139164164
339358400400500480480480500500
444525535535562640640640668668
290292320320380380380380444444
420420420420420420420420420420
a b c d e f g h iPositional dimension of nozzle
300350, 400
450500, 550
600650, 700
750800
850, 900950
1000, 10501100, 11501200, 12501300 ~ 14001450, 15001600, 17001800, 1900
2000
673714734734734810810800800800800858858979979
1,0051,0051,005
933974
1,0271,0271,0271,1551,1551,1801,1801,1801,1801,2781,2781,4691,4691,5651,5651,565
398422455475495410430436456456475437456523543584603623
616622676696716710730796816816835817836963983
1,0241,0431,063
37899090909595139139139139164164257257269269269
340358400400400500500480480480480500500600600700700700
444525535535535562562640640640640668668925925897897897
290292320320320380380380380380380444444500500580580580
420420420420420420420420420420420420420612612620620620
This dimensional outline drawing shows a standard nozzle location. Please consult with our sales staff or distributor in case of a 3-pass or 4-pass system.
Dimensional Outline Drawing
REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. * This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1250GSG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F800GSG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power: AC 380V/50Hz/3φ/3W or 4W. 7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)
Model COPHeight [C] ExtubationspaceWidth [B]Length [A]
Overall Dimension (mm)
300301351401451501551601651701751801851901951
1,0011,0511,1011,1511,201
3003504004505005506006507007508008509009501,0001,0501,1001,1501,2001,250
- - - - - - - - - - - - - - - - - - - -
4.57 4.59 4.70 4.73 4.96 4.97 4.98 5.02 5.09 5.14 5.23 5.27 5.29 5.12 5.17 5.26 5.23 5.26 5.30 5.33
5.47 5.49 5.62 5.65 5.93 5.94 5.95 6.01 6.08 6.15 6.26 6.30 6.33 6.13 6.18 6.29 6.26 6.29 6.34 6.37
- - - - - - - - - - - - - - - - - - - -
2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,750
1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,650
2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,950
2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,000
5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,500
6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,600
■ HC-F_GSG-SIT
HC-F300GSG-SITHC-F350GSG-SITHC-F400GSG-SITHC-F450GSG-SITHC-F500GSG-SITHC-F550GSG-SITHC-F600GSG-SITHC-F650GSG-SITHC-F700GSG-SITHC-F750GSG-SITHC-F800GSG-SITHC-F850GSG-SITHC-F900GSG-SITHC-F950GSG-SITHC-F1000GSG-SITHC-F1050GSG-SITHC-F1100GSG-SITHC-F1150GSG-SITHC-F1200GSG-SITHC-F1250GSG-SIT
a b c d e f g h iPositional dimension of nozzle
300, 350400, 450
500550
600, 650700 ~ 850900, 950
1000, 10501100, 11501200 ~ 1350
140015001600
1700, 18001900, 2000
673715714734734810780780858858858979979
1,0051,005
933975974
1,0271,0271,1551,1601,1601,2781,2781,2781,4691,4691,5651,565
398442462474494430455475456475475562582603623
616642662695715730815835836855855
1,0021,0221,0431,063
33101101102102107139139164164164257257269269
339358358400400500480480500500500600600700700
444525525535535562640640668668668925925897897
290292292320320380380380444444444500500580580
420420420420420420420420420420420612612620620
4.60 - 5.504.66 - 5.584.75 - 5.684.78 - 5.725.02 - 6.015.00 - 5.975.03 - 6.025.07 - 6.065.13 - 6.145.17 - 6.185.34 - 6.385.38 - 6.445.39 - 6.455.19 - 6.205.23 - 6.255.26 - 6.295.29 - 6.335.33 - 6.375.35 - 6.395.38 - 6.445.37 - 6.425.38 - 6.445.38 - 6.445.39 - 6.455.40 - 6.465.47 - 6.555.46 - 6.535.39 - 6.455.46 - 6.525.49 - 6.57
2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,7504,7004,7004,7004,7004,7005,0005,0005,0005,0005,000
1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,6503,3003,3003,3003,3003,3003,5003,5003,5003,5003,500
2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,9503,4003,4003,4003,4003,4003,7003,7003,7003,7003,700
2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,0003,5003,5003,5003,5003,5004,0004,0004,0004,0004,000
5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,50018,60018,70018,80018,90019,00021,00021,20021,50021,70022,000
6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,60021,60021,70021,80022,00022,10024,70025,00025,40025,70026,000
HC-F300GSG-SHC-F350GSG-SHC-F400GSG-SHC-F450GSG-SHC-F500GSG-SHC-F550GSG-SHC-F600GSG-SHC-F650GSG-SHC-F700GSG-SHC-F750GSG-SHC-F800GSG-SHC-F850GSG-SHC-F900GSG-SHC-F950GSG-SHC-F1000GSG-SHC-F1050GSG-SHC-F1100GSG-SHC-F1150GSG-SHC-F1200GSG-SHC-F1250GSG-S
HC-F1300GSG-S (*1)HC-F1350GSG-S (*1)HC-F1400GSG-S (*1)HC-F1450GSG-S (*1)HC-F1500GSG-S (*1)HC-F1600GSG-S (*1)HC-F1700GSG-S (*1)HC-F1800GSG-S (*1)HC-F1900GSG-S (*1)HC-F2000GSG-S (*1)
300 - 300301 - 350300 - 400401 - 450451 - 500501 - 550551 - 600601 - 650651 - 700701 - 750751 - 800801 - 850851 - 900901 - 950
951 - 1,0001,001 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2001,201 - 1,2501,251 - 1,3001,301 - 1,3501,351 - 1,4001,401 - 1,4501,451 - 1,5001,501 - 1,6001,601 - 1,7001,701 - 1,8001,801 - 1,9001,901 - 2,000
■ HC-F_GSG-S
Model COPHeight [C] ExtubationspaceWidth [B]Length [A]
Overall Dimension (mm)
Specifications Dimensional Data
Model: HCF_GXG-S HCF_GXG-SIT
Model: HCF_GSG-S HCF_GSG-SIT
Constant Speed
Inverter-controlled
Model
■ Starter Panel (Open star-delta)
300 ~ 400450 ~ 500550 ~ 800850 ~ 900950 ~ 1250
Length800800
1,0001,0001,500
Width600750800800
1,000
Height2,1001,7001,9002,2002,100
Dimensions (mm)
GSG-S
Model
■ Inverter PanelDimensions (mm)
GSG-SIT
300~400450~600650~800850~1250
Length1,9001,9002,1002,200
Width950950950950
Height1,9002,3002,3002,450
Compressor, Main motor, Lubrication system, Heat exchanger
Safety device, Control panel, Standard accessories (Corrugated rubber vibration insulator plates, Oil strainer elements, Gasket for oil strainer elements, Dryer), Starter (optional)
Chiller main unit: Anti-corrosive prime coatingControl panel: Finish coat (color: Munsell 5Y8/1 gloss)Starter (optional): Finish coat (color: Munsell 5Y7/1 semigloss)
Foundation work, Carrying-in, Installation, Piping work, Cold insulation, Primary and secondary side electrical wiring, Commissioning for total system, Forced ventilation system, Outdoor discharge piping for safety valve, Counter flange, Bolt, Nut, Gasket, Foundationbolt, Refrigerant
*1. Power sourse: High /Middle tension Standard starting method: Reactor
iLength(A)
ab
cd
e f g h
Width(B)
Hei
ght(
C)
Cooling water outletChilled water outlet
Cooling water inletChilled water inletControl panel
CompressorMain motor
EconomizerMotor terminal boxCondenser
Evaporator Safety valve for evaporator
Safety valve for condenser
Side B Side A
Cooling CapacityUSRT
Cooling CapacityUSRT kg
Operating Weightkg
Shipping Weight
kgOperating Weight
kgShipping Weight
-
9 10
The following table shows the standard scope of supply, but the actual scope depends on the contract. Please consult with our sales staff or distributor.
Item
Main Equipment
Auxiliary Equipment
Coating
Out of Supply Scope
Standard Scope
Standard Scope of Supply
a b c d e f g h i
■Positional Dimension of Water Piping (unit: mm)Positional dimension of nozzleModel: HCF_GFG-SSC
HCF_GFG-SITSC
300, 350400, 450500, 550600, 650
700 ~ 850900, 950
1000, 105011001150
1200 ~ 1400
673715734734810780780780858858
933975
1,0271,0271,1551,1601,1601,1601,2781,278
398442474494430455475495456456
616642695715730815835855836836
33101102102107139139139164164
339358400400500480480480500500
444525535535562640640640668668
290292320320380380380380444444
420420420420420420420420420420
a b c d e f g h iPositional dimension of nozzle
300350, 400
450500, 550
600650, 700
750800
850, 900950
1000, 10501100, 11501200, 12501300 ~ 14001450, 15001600, 17001800, 1900
2000
673714734734734810810800800800800858858979979
1,0051,0051,005
933974
1,0271,0271,0271,1551,1551,1801,1801,1801,1801,2781,2781,4691,4691,5651,5651,565
398422455475495410430436456456475437456523543584603623
616622676696716710730796816816835817836963983
1,0241,0431,063
37899090909595139139139139164164257257269269269
340358400400400500500480480480480500500600600700700700
444525535535535562562640640640640668668925925897897897
290292320320320380380380380380380444444500500580580580
420420420420420420420420420420420420420612612620620620
This dimensional outline drawing shows a standard nozzle location. Please consult with our sales staff or distributor in case of a 3-pass or 4-pass system.
Dimensional Outline Drawing
REMARKS1. Please consult with our sales staff or distributor for actual specifications for cooling capacity, expected kW input and COP, depending on selected operating parameters. 2. The above specifications are subject to change without notice for technical improvements. * This table is applicable to chillers to be manufactured for normal water.3. Capacity control range is 100% to approx. 20%. (Minimum cooling capacity can be reduced to 10% as option.)4. Fouling factor is assumed to be 0.018m2K/kW for chilled water and 0.044m2K/kW for cooling water.5. Standard main power source : 380V/400V/415V/440V/460V (up to HC-F1250GSG-S), 3000V/3300V/6000V/6600V (any capacity, only constant speed), 10000V/11000V (F800GSG-S and above, only constant speed), AC, 50/60Hz, 3ph. 6. Auxiliary power: AC 380V/50Hz/3φ/3W or 4W. 7. Maximum working pressure is 1.0MPa for both chilled and cooling water. If higher maximum working pressure is required, please specify at inquiry. (Up to 2.5 MPa is available.)
Model COPHeight [C] ExtubationspaceWidth [B]Length [A]
Overall Dimension (mm)
300301351401451501551601651701751801851901951
1,0011,0511,1011,1511,201
3003504004505005506006507007508008509009501,0001,0501,1001,1501,2001,250
- - - - - - - - - - - - - - - - - - - -
4.57 4.59 4.70 4.73 4.96 4.97 4.98 5.02 5.09 5.14 5.23 5.27 5.29 5.12 5.17 5.26 5.23 5.26 5.30 5.33
5.47 5.49 5.62 5.65 5.93 5.94 5.95 6.01 6.08 6.15 6.26 6.30 6.33 6.13 6.18 6.29 6.26 6.29 6.34 6.37
- - - - - - - - - - - - - - - - - - - -
2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,750
1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,650
2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,950
2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,000
5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,500
6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,600
■ HC-F_GSG-SIT
HC-F300GSG-SITHC-F350GSG-SITHC-F400GSG-SITHC-F450GSG-SITHC-F500GSG-SITHC-F550GSG-SITHC-F600GSG-SITHC-F650GSG-SITHC-F700GSG-SITHC-F750GSG-SITHC-F800GSG-SITHC-F850GSG-SITHC-F900GSG-SITHC-F950GSG-SITHC-F1000GSG-SITHC-F1050GSG-SITHC-F1100GSG-SITHC-F1150GSG-SITHC-F1200GSG-SITHC-F1250GSG-SIT
a b c d e f g h iPositional dimension of nozzle
300, 350400, 450
500550
600, 650700 ~ 850900, 950
1000, 10501100, 1150
1200 ~ 1350140015001600
1700, 18001900, 2000
673715714734734810780780858858858979979
1,0051,005
933975974
1,0271,0271,1551,1601,1601,2781,2781,2781,4691,4691,5651,565
398442462474494430455475456475475562582603623
616642662695715730815835836855855
1,0021,0221,0431,063
33101101102102107139139164164164257257269269
339358358400400500480480500500500600600700700
444525525535535562640640668668668925925897897
290292292320320380380380444444444500500580580
420420420420420420420420420420420612612620620
4.60 - 5.504.66 - 5.584.75 - 5.684.78 - 5.725.02 - 6.015.00 - 5.975.03 - 6.025.07 - 6.065.13 - 6.145.17 - 6.185.34 - 6.385.38 - 6.445.39 - 6.455.19 - 6.205.23 - 6.255.26 - 6.295.29 - 6.335.33 - 6.375.35 - 6.395.38 - 6.445.37 - 6.425.38 - 6.445.38 - 6.445.39 - 6.455.40 - 6.465.47 - 6.555.46 - 6.535.39 - 6.455.46 - 6.525.49 - 6.57
2,7502,8002,8003,2503,2503,2503,2503,5003,5003,5003,5003,5003,7503,7503,7503,7503,7503,7503,7503,7504,7004,7004,7004,7004,7005,0005,0005,0005,0005,000
1,9002,0002,0002,1002,1002,1002,1002,3502,3502,3502,4502,4502,4502,4502,4502,4502,6502,6502,6502,6503,3003,3003,3003,3003,3003,5003,5003,5003,5003,500
2,3502,3502,3502,4502,4502,4502,4502,7002,7002,7002,8002,8002,8002,8002,8002,8002,9502,9502,9502,9503,4003,4003,4003,4003,4003,7003,7003,7003,7003,700
2,0002,0002,0002,5002,5002,5002,5002,8002,8002,8002,8002,8002,8003,0003,0003,0003,0003,0003,0003,0003,5003,5003,5003,5003,5004,0004,0004,0004,0004,000
5,5006,8006,9008,4008,5008,6008,80010,20010,30010,40011,50011,60011,70012,20012,30012,40013,20013,30013,40013,50018,60018,70018,80018,90019,00021,00021,20021,50021,70022,000
6,7007,5007,6009,3009,4009,5009,80011,60011,70011,80013,00013,20013,30014,20014,30014,50015,30015,40015,50015,60021,60021,70021,80022,00022,10024,70025,00025,40025,70026,000
HC-F300GSG-SHC-F350GSG-SHC-F400GSG-SHC-F450GSG-SHC-F500GSG-SHC-F550GSG-SHC-F600GSG-SHC-F650GSG-SHC-F700GSG-SHC-F750GSG-SHC-F800GSG-SHC-F850GSG-SHC-F900GSG-SHC-F950GSG-SHC-F1000GSG-SHC-F1050GSG-SHC-F1100GSG-SHC-F1150GSG-SHC-F1200GSG-SHC-F1250GSG-S
HC-F1300GSG-S (*1)HC-F1350GSG-S (*1)HC-F1400GSG-S (*1)HC-F1450GSG-S (*1)HC-F1500GSG-S (*1)HC-F1600GSG-S (*1)HC-F1700GSG-S (*1)HC-F1800GSG-S (*1)HC-F1900GSG-S (*1)HC-F2000GSG-S (*1)
300 - 300301 - 350300 - 400401 - 450451 - 500501 - 550551 - 600601 - 650651 - 700701 - 750751 - 800801 - 850851 - 900901 - 950
951 - 1,0001,001 - 1,0501,051 - 1,1001,101 - 1,1501,151 - 1,2001,201 - 1,2501,251 - 1,3001,301 - 1,3501,351 - 1,4001,401 - 1,4501,451 - 1,5001,501 - 1,6001,601 - 1,7001,701 - 1,8001,801 - 1,9001,901 - 2,000
■ HC-F_GSG-S
Model COPHeight [C] ExtubationspaceWidth [B]Length [A]
Overall Dimension (mm)
Specifications Dimensional Data
Model: HCF_GXG-S HCF_GXG-SIT
Model: HCF_GSG-S HCF_GSG-SIT
Constant Speed
Inverter-controlled
Model
■ Starter Panel (Open star-delta)
300 ~ 400450 ~ 500550 ~ 800850 ~ 900950 ~ 1250
Length800800
1,0001,0001,500
Width600750800800
1,000
Height2,1001,7001,9002,2002,100
Dimensions (mm)
GSG-S
Model
■ Inverter PanelDimensions (mm)
GSG-SIT
300~400450~600650~800850~1250
Length1,9001,9002,1002,200
Width950950950950
Height1,9002,3002,3002,450
Compressor, Main motor, Lubrication system, Heat exchanger
Safety device, Control panel, Standard accessories (Corrugated rubber vibration insulator plates, Oil strainer elements, Gasket for oil strainer elements, Dryer), Starter (optional)
Chiller main unit: Anti-corrosive prime coatingControl panel: Finish coat (color: Munsell 5Y8/1 gloss)Starter (optional): Finish coat (color: Munsell 5Y7/1 semigloss)
Foundation work, Carrying-in, Installation, Piping work, Cold insulation, Primary and secondary side electrical wiring, Commissioning for total system, Forced ventilation system, Outdoor discharge piping for safety valve, Counter flange, Bolt, Nut, Gasket, Foundationbolt, Refrigerant
*1. Power sourse: High /Middle tension Standard starting method: Reactor
iLength(A)
ab
cd
e f g h
Width(B)
Hei
ght(
C)
Cooling water outletChilled water outlet
Cooling water inletChilled water inletControl panel
CompressorMain motor
EconomizerMotor terminal boxCondenser
Evaporator Safety valve for evaporator
Safety valve for condenser
Side B Side A
Cooling CapacityUSRT
Cooling CapacityUSRT kg
Operating Weightkg
Shipping Weight
kgOperating Weight
kgShipping Weight
-
CentrifugalChiller High EfficiencyGFG-S/SIT Series
GXG-S/SIT SeriesGSG-S/SIT Series
G700DLV
Printed in Japan (H) MR-E070P Mar. 2017
http://www.jci-hitachi.com