cen
DESCRIPTION
requirements of gear according to EN regulationsTRANSCRIPT
![Page 1: Cen](https://reader036.vdocuments.us/reader036/viewer/2022071805/563dbade550346aa9aa8b87a/html5/thumbnails/1.jpg)
CEN EN 12644-1:2001+A1:2008
Cranes - Information for use and testing - Part 1: Instructions
CEN EN 13000:2010+A1:2014 (new)
Cranes - Mobile cranes
This is the first publication
EN 13000:2010
Note 2.1
The date of this publication
()
CEN EN 13001-1:2004+A1:2009
Cranes - General design - Part 1: General principles and requirements
08/09/2009
EN 13001-1:2004+A1:2009/AC:2009
CEN EN 13135:2013
Cranes - Safety - Design - Requirements for equipment
CEN EN 13155:2003+A2:2009
Cranes - Safety - Non-fixed load lifting attachments
![Page 2: Cen](https://reader036.vdocuments.us/reader036/viewer/2022071805/563dbade550346aa9aa8b87a/html5/thumbnails/2.jpg)
EN13155:2003
2 x load limit without deformation3 x load limit without releasing the load (permanent deformation is allowed)
Storage: mag niet omvallen bij 10° scheefstandThe beam shall be effective at 6° tilting
Instructieboek:
Beschrijving, wll, use, operating range, operating instructions, handling and storage, temperature, restriction for use in special atmospheres, training in case required
Marking:name and address manufacturer serial numberdesignation of the machineryWeightWLLDate of productionCE marking
Testing:Verification without testLoad case: wt +2xWLLallowable stress: table A.1 p 37welds to be checked
Buckling volgens EN1993-1-1brittle fracture
Verification with test2X WLL in worst case configuration duration: 1min without shocksno visual defects afterwards