cement flow table motorised/manual...
TRANSCRIPT
1
Cement Flow Table Motorised/Manual Model
PRODUCT CODE:
PRODUCT STANDARDS:
PRODUCT DESCRIPTION:
There are two models of the Cement Flow Table, the TCM- 0060/A conforming to ASTM and the TCM-0060/E conforming to the
EN standard. Both are used for determining the consistency of
mortar, lime and cement specimens. Manual and motorized
The hand operated model is fitted with a hand wheel. The motor
operated model is driven by a motor speed reducer through a
mechanical coupling at the rate of 1 revolution per second. The
number of drops is preset on a counter and the machine
stops automatically at the end of the cycle.
EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical mould is made of brass and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height. ASTM model; the table is manufactured from brass and has 254 mm diameter. The conical mould is made of brass has
dimensions of 100 mm base dia. X 70 mm top dia. X 50 mm height
Both models are supplied complete with brass flow mould and tamper. 60 Hz versions are available and should be mentioned on
your order if required.
TCM-0060/A
TCM-0061/A
TCM-0062/A
TCM-0063/A
TCM-0063/A/110 TCM-0060/E
TCM-0061/E
TCM-0062/E
TCM-0063/E
Cement Flow Table ASTM, metric
Cement Flow Mould ASTM , metric
Tamper ASTM Hardwood 13x25x150 mm
Motorized Cement Flow Table ASTM,
220-240 V 50 Hz
Motorized Cement Flow Table ASTM,
110 V 60 Hz
Cement Flow Table EN
Cement Flow Mould EN
Tamper EN Ø 40x200 mm 250g
Motorized Cement Flow Table EN,
220-240 V 50 Hz
ASTM C230; EN 459-2, 1015-3
TCM-0060/A
TCM-0060/E
TCM-0063/A
TCM-0063E
TCM-0062/A
TCM-0061/A
TCM-0062/E
TCM-0061/E
TCM-0060/A TCM-0060/E TCM-0060/A TCM-0063/E ASTM EN Table Diameter 254mm 300mm Cone Base/Top Diameter 100mm/70mm 100mm/70mm Cone Height 50mm 60mm Drop Height 12.7mm 10.0mm Dimensions: Manual 260x260x270mm Motorised 470x360x350mm Weight: Manual 13kg Motorised 36kg Power: 180W – Motorised.