Cement Board and BuildingSystems• ACOUSTIC FLOORING • FLOATING FLOORS• PERFORMANCE FLOORING • MODULAR CONSTRUCTION• IMPACT LININGS • EXTERNAL CLADDING• ACOUSTIC ROOFING • FIRE PROTECTION• KIT OF PARTS SUPPLY

Versapanel® is a cement bonded particle board comprising of wood particles and cement.

Versapanel® is smooth in texture and light grey in colour.

Versapanel® is a T2 cement bonded particle board and isintended for use in both internal or external situations, typeT2 boards have high levels of performance in the presenceof moisture and have a high resistance to fire.

Versapanel® is a versatile material that is suitable for awide range of applications and represents an advantage inbuilding board technology to meet increasingly stringentbuilding regulations and demands for higher standards ofdurability, safety and economy.

Versapanel® contains no hazardous volatiles, is asbestos free and its process dust is non aggressive and can be planed, sanded, drilled, routed, nailed and screwed.

THE PRODUCT SPECIFICATION

Versapanel® is available in three types:

Unsanded - Calibrated - Primed/Sealed

Unsanded is suitable for most types of decorative finishes.

Calibrated is standard production which is then simultaneously sandedon both sides, it is used when a laminate or veneer is to be applied orwhere a product of minimal thickness tolerance is required.

Prime/Sealed for flooring applications. For more details refer to theVersapanel Technical Manual or Web pages.

INTERNAL

Versapanel® board is workable, durable andhas three main attributes - RESISTANCE TO: FIRE - SOUND - MOISTURE

Versapanel® may be used in wet areas. It has anti-fungal properties and is thereforeideal for cold storage, food processing andother similar areas where hygiene is of importance.

Versapanel® is the first choice for internalwalls and partitions in domestic or public buildings due to its impact resistance, fire resistance and sound reduction properties.

EXTERNAL

Versapanel® has proven performance as an external cladding material.

Versapanel® has been successfully used in prefabricated panel construction - both singleskin and sandwich application. Also due to theexcellent “racking” properties, the board maybe utilised as a structural member in a composite buildingapplication.

Versapanel® in an untreated state is weatherresistant even if subjected to freeze/thaw conditions. However, in general, a surface treatment isrecommended for external applications. A wide range of paint, tile andtextured finishes may be used.

APPLICATIONS VERSAPANEL® FIRE PERFORMANCES

FLOORS & CEILINGS

EXTERNAL CLADDING

PARTITIONS

Typical examples: As a single board material VERSAPANEL® is probably one of the most versatile flat sheetmaterials available when it comesto applications in areas which haveto be fire rated.

Versapanel® wide range of thicknesses combined with itsunique qualities of:

Resistance to Moisture -Resistance to Impact - AcousticPerformance - Internal or External- Smooth Surfaces to both Faces,make it a very cost effective solution for fire protection.

Versapanel® has been tested inaccordance with the BS476 whichis the test relevant to buildingmaterials and structures.

Versapanel has 1 hour and 2 hourfire reports - ASTM E 119/UL 263for floors/ceilings assembly.

VERSAPANEL® IS A CLASS ‘O’BUILDING BOARD.

For further design information and for details of tests in fire performance applications pleasecontact our Technical SalesDepartment.

4 Class ‘O’4 Fully External/Internal Board

4 Moisture Resistant4 Impact Resistant

4 Range of Thickness4 Durable

4 Acoustic Performance4 Rot Resistant

pVERSAPANEL® IS USEDWORLDWIDE AS A HIGH

PERFORMANCE FINISH TO SIPPANEL MANUFACTURE.

t VERSAPANEL® used in anacoustic roof lay-up system.

t VERSAPANEL® used as ExternalCladding for Joint Free Flexible surface

treatment to be applied. q

VERSAPANEL® used throughout construction as External Cladding,

Flooring and Acoustic Ceiling. Also as alining in high impact areas, for this

prestigious contract.

Product Range: Standard Sizes:Unsanded 2400 x 1200* 2440 x 1220*Calibrated 2400 x 1200* 3050 x 1220*

* Standard Stock Size

Conforms to the requirements of BS EN 634-1 BS EN 634-2.

For full Technical Data and Physical Properties go towww.versapanel.co.ukor contact our Sales Department on 01925 860 999

VERSAPANEL® CHARACTERISTICS FOR UNSANDED AND CALIBRATED BOARDS

Thickness of boards in mm 8 10 12 16 19 22 25 28 32 42

Approx weight per M2 in Kg 10 13 15 20 24 28 31 35 40 52

Airborne sound reduction 30 31 31 33 33 34 35 36 37 39for a single board in dB For additional construction advise on systems

please contact technical sales

Manual nailing wit out Y Y Y N N N N N N Npre-drilled holes Manual nailing with pre-drilled holes suits all thicknesses

Manual screwing with pre-drilled holes suits all thicknesses

Power nailing without Y Y Y Y Y N N N N Npre-drilled holes Power screwing suits all thicknesses

Nailing and screwing into N N N Y Y Y Y Y Y Yedges

Edge Rebate N Y Y Y Y Y Y Y Y Yprofiling Groove N N Y Y Y Y Y Y Y Y

T&G N N N Y Y Y Y Y Y Y

General internal 400mm Y N N N N N N N N Nlining and external cladding 600mm N Y Y Y Y Y Y Y Y Y

Ceilings and 400mm Y Y Y N N N N N N Nsoffits 600mm N Y Y Y Y Y Y Y Y Y

full technical

manualavailable

TECHNICAL DATA

FAXB

ACK COMPANY

NAME

POSITION

ADDRESS

POST CODE

TELEPHONE

FAX

EMAIL

Unit 2 Lyncastle Road Warrington Cheshire WA4 4SNTel: +44 (0) 1925 860999 Fax: +44 (0) 1925 860066

Email: info@euroform.co.ukwww.euroform.co.uk

Due to our policy of continuous development we reserve the right to change design and specifications without prior notice.Euroform Products Limited does not accept responsibility for any loss as a result of any company or person relying on materialin this publication, or for any mistakes or misprints. Although every care is taken to ensure accuracy, this brochure is a generalguide and specific technical advice is recommended before proceeding with any transaction. Specific fact sheets, or, technical

information is available from Euroform technical department 01925 860999.Reproduction of any part of this publication in anymanner is not permitted without prior written consent from Euroform Products Limited.

09/2006

Tick the following boxes formore information and fax backto 01925 860066 or visit our website www.euroform.co.uk

9 Versapanel®

9 Versafire®

9 VersalinerTM

JPM

9 UfoilTM

9 XfoilTM

Multi-Foil

9 VersachimneyTM

Reflective Insulation

9 VersalayerTM

9 VersadormTM

& Canopies

9 VersafloorTM

9 EZ WallTM

9 External Cladding

9 Specialist Fabrication Service

Euroform Products Limited will not distribute to any other company any information given on this reply form. However, thisinformation will be added to our Company database in order to

process your request. We may contact you for further informationregarding your enquiry. If you would like to be taken off our

database at any time after this please let us know on 01925 860999 or email info@euroform.co.uk.