celtic knot bone pendant triquetra pendant
TRANSCRIPT
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
1/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Food Living Outside Play Technology Workshop
Celtic Knot Bone Pendant - Triquetra Pendantby Caffeinomane on October 8, 2011
Table of Contents
Celtic Knot Bone Pendant - Triquetra Pendant ........................................................................................
Intro: Celtic Knot Bone Pendant - Triquetra Pendant ................................................................................
Step 1: Material ............................................................................................................
Step 2: Tools ..............................................................................................................
Step 3: Cutting #1 ..........................................................................................................
Step 4: Planning the Triquetra .................................................................................................
Step 5: Etching #1 ..........................................................................................................
Step 6: Cutting #2 ..........................................................................................................
Step 7: Drilling #1 ..........................................................................................................
Step 8: Shaping ...........................................................................................................
Step 9: Etching #2 ..........................................................................................................
Step 10: Drilling #2 .........................................................................................................
Step 11: Done! ............................................................................................................ 1
Related Instructables ........................................................................................................ 1
Comments ................................................................................................................ 1
http://www.instructables.com/member/Caffeinomane/?utm_source=pdf&utm_campaign=titlehttp://www.instructables.com/tag/type-id/category-workshop/http://www.instructables.com/tag/type-id/category-technology/http://www.instructables.com/tag/type-id/category-play/http://www.instructables.com/tag/type-id/category-outside/http://www.instructables.com/tag/type-id/category-living/http://www.instructables.com/tag/type-id/category-food/
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
2/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Intro: Celtic Knot Bone Pendant - Triquetra PendantA couple of days ago I was making a Bone Ring and I had a l ittle piece of bone left over. With that I made a little Triquetra Pendant for my girlfriend. As usual, I usedsimple tools that anybody can have at home (no fancy lathe or CNCs).
Part of the work was already done for the ring that I made so I will just cite my other instructable: Celtic Knot Bone Ring
The close-up pictures were taken with a Pentax K10 D and a Tamron AF 90mm f/2.8 SP Di macro lens.The other pictures, with a Pentax SMC-FA 50mm f/1.4.
Step 1: MaterialJust one: a Bone! Beef bones are the bigger and the most suitable ones.
In Italy, especially in my region, we prepare a very good sauce with bone marrow. It is called pevarà (sometimes pearà) and it is made of bread, bone marrow, beef brbutter and a lot of pepper. In fact its name literally means peppered. So that is why I have those big bones lying around.
CleaningAn important point is the cleaning of the bone. After the cooking the sponge-like part of the bone is full of red bone marrow and that is not good if you want to work wit
the bone. The best way to clean it is to put it in the dishwasher!I was surprised, when I first tried this trick, how good it worked. It perfectly cleans every part of the bone and exposes the sponge-like part.
I put also some close-up pictures of the sponge-like part because it is too cool. Our bones have this kind of structure near the ends to make them light but strong.
Image Notes1. Beef bones
http://www.instructables.com/id/Celtic-Knot-Bone-Ring/
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
3/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Image Notes1. Sponge-like interior to make it light and strong.
Image Notes1. The sponge-like part seen from the other side.
Step 2: ToolsToy vise (I got it when I was a child but I still use it);Clamp;Very old drill;Drill bit for wood;Drill saw;Drill bit to scrape;Dremel;Dremel drill press (this is not necessary but very usefull);A selection of Dremel bits;Compass to draw the Triquetra (again, not necessary but useful).
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
4/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Image Notes1. My little toy vise.
Image Notes1. Plastic covers avoid damages of what you are holding.
Image Notes1. 16 mm drill bit2. Drill saw3. Drill scrape.
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
5/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Image Notes1. High speed cutter n. 118
Image Notes1. Engraving cutter n. 107
Image Notes1. Engraving cutter n. 111
Image Notes1. Polishing felt.
Image Notes1. Precision Drill Set n. 628
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
6/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Step 3: Cutting #1Now that we have everything we need let us start with the preparation of the bone piece. Be careful: wear eye protection!With the drill saw I cutted a rectangular piece off the bone, that incidentally is a leftover piece of the Bone Ring.
Image Notes1. Barely big enough to hold the bone
Image Notes1. The piece, ready to be worked on.
Image Notes1. Nice sponge-like structure
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
7/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Step 4: Planning the TriquetraUsing a small compass I drew a preparatory drawing on a piece of paper. With the compass I drew the same design on the piece of bone.
Image Notes1. Preparatory drawing
Image Notes1. Transported drawing on the bone
Step 5: Etching #1With the conic Dremel bit (High speed cutter n. 118) I passed on the pencil lines to mark the drawing.
While on the back I took some of the sponge-like part off.
Image Notes1. Marked with the Dremel High Speed cutter n. 118
Image Notes1. Taking a little bit off
Step 6: Cutting #2Now that the drawing is firmly on the piece I cut the triangle away with the drill saw.
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
8/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Image Notes1. Cutting as close as possible
Image Notes1. This tiny bit is holding it!
Step 7: Drilling #1With the smallest Dremel bit I drilled holes where the design supposed to have empy spots. Then using the Dremel Engraving Cutter n. 111 I enlarged the holes to theplanned shape.
Image Notes1. Giving the holes the desired shape
Step 8: ShapingThe sides of the triangle were then scraped to get the real shape. I used a combination of the Dremel bits that I have.
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
9/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Step 9: Etching #2Then I etched the design on the piece with my Dremel bits.
Step 10: Drilling #2Holding the pendant with a clamp I Drilled a small hole on the side to pass a necklace into it.
Image Notes1. Holding firmly
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
10/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Step 11: Done!I am very satisfied with the result that I got! The etching is good and visible even from a distance. The holes give it a touch of lightness that I really like. I am now lookifor a gold or silver necklace that can pass through that tiny hole on the side.
Image Notes1. Pendant and Ring
Image Notes1. On my girlfriend's neck.
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
11/12
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/
Image Notes1. I like this picture because you can see the different thicknesses with thetransparency of the bone.
Related Instructables
Celtic Knot
Bone Ring by
Caffeinomane
How to tieslidingadjustableknots for Maori
Necklaces by
awaylaffin
Celtic CubeCarving (Photos)
by PentaSoul
Celtic Button
Knot (video) by
StormdraneSimpleHalloweenGravestoneDecoration
(Photos) by
noahh
Celtic KnitHandbag
(Photos) by
cozycoleman
http://www.instructables.com/member/cozycoleman/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Knit-Handbag/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Knit-Handbag/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Knit-Handbag/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Knit-Handbag/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/member/noahh/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Simple-Gravestone/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Simple-Gravestone/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Simple-Gravestone/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Simple-Gravestone/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Simple-Gravestone/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Simple-Gravestone/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/member/Stormdrane/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Button-Knot/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Button-Knot/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Button-Knot/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Button-Knot/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/member/PentaSoul/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Cube-Carving/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Cube-Carving/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Cube-Carving/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Cube-Carving/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/member/awaylaffin/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/How-to-tie-sliding-adjustable-knots-for-Maori-Neck/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/How-to-tie-sliding-adjustable-knots-for-Maori-Neck/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/How-to-tie-sliding-adjustable-knots-for-Maori-Neck/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/How-to-tie-sliding-adjustable-knots-for-Maori-Neck/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/How-to-tie-sliding-adjustable-knots-for-Maori-Neck/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/How-to-tie-sliding-adjustable-knots-for-Maori-Neck/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/member/Caffeinomane/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Knot-Bone-Ring/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Knot-Bone-Ring/?utm_source=pdf&utm_campaign=relatedhttp://www.instructables.com/id/Celtic-Knot-Bone-Ring/?utm_source=pdf&utm_campaign=related
-
8/17/2019 Celtic Knot Bone Pendant Triquetra Pendant
12/12
htt // i t t bl /id/C lti K t B P d t T i t P d t/
Comments
2 comments Add Comment
Penolopy Bulnick says: Jan 13, 2012. 3:13 PM REPWow, I didn't realize how small it was until I saw it in comparison with your hand! I love celtic design; it is just beautiful!
monsterlego says: Jan 13, 2012. 3:08 PM REPNice!
http://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/?utm_source=pdf&utm_campaign=comments#DISCUSShttp://www.instructables.com/member/monsterlego/?utm_source=pdf&utm_campaign=commentshttp://www.instructables.com/member/monsterlego/?utm_source=pdf&utm_campaign=commentshttp://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/?utm_source=pdf&utm_campaign=comments#DISCUSShttp://www.instructables.com/member/Penolopy+Bulnick/?utm_source=pdf&utm_campaign=commentshttp://www.instructables.com/member/Penolopy+Bulnick/?utm_source=pdf&utm_campaign=commentshttp://www.instructables.com/id/Celtic-Knot-Bone-Pendant-Triquetra-Pendant/?utm_source=pdf&utm_campaign=comments#comments