ce900 tv bracket - spirit fitness · 2018. 11. 5. · ce900 tv bracket step three 1. assemble the...

CE900 TV BRACKET INSTALLATION GUIDE

2Spirit Fitness

3

www.spiritfitness.com

Thank you for your purchase of this TV bracket from Spirit Fitness. This bracket was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit Fitness will do all we can to make your ownership experience as pleasant as possible for many years to come. If not purchased direct from Spirit Fitness, the local dealership where you purchased this bracket is your administrator for all Spirit Fitness warranty and service needs. Their responsibility is to provide you with the technical knowledge and service personnel to make your experience more informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their telephone number, and the date of purchase below to make any future, needed contact easy. We appreciate your support and we will always remember that you are the reason that we are in business. Please complete and mail your registration card today.

Yours in Health,Spirit Fitness NAME OF DEALER ______________________________________

DEALER PHONE # ______________________________________

PURCHASE DATE ______________________________________

4Spirit Fitness

WARNING: This product may contain a chemical known to the state of California to cause cancer, birth defects, or other reproductive harm.

5


CE900 TV BRACKET STEP ONE1. Remove console cover and console.

2. Using a TV cable, or wire snake (indicated in a thick black line), drop it down the oval hole of the console mast tube. The cable should be free to travel all the way down the main tube and will exit the bottom of the machine where you may route the cables wherever needed.

6Spirit Fitness

CE900 TV BRACKET STEP TWO

543

54 31. Route the cables at the top of the machine

through the TV bracket and mount the bracket to the console mast with the four M10 BOLTS (3), SPLIT WASHERS (4) and FLAT WASHERS (5).

2. Re-assemble the console and console cover to the console mast.

HARDWARE FOR STEP 2

PART TYPE DESCRIPTION QTY

3 BOLT M10x25mm 4

4 SPLIT WASHER M10 4

5 FLAT WASHER 3/8”x2.0 4

7


9

67

8

67 8

CE900 TV BRACKET STEP THREE

1. Assemble the TV to the TV bracket with four M4 SCREWS (6), SPLIT WASHERS (7) and FLAT WASHERS (8).

2. Attach the rear TV bracket cover with the M5 SCREW (9).

3. Connect the cables to the TV.

HARDWARE FOR STEP 3

PART TYPE DESCRIPTION QTY

6 SCREW M4x12mm 4

7 SPLIT WASHER M4 4

8 FLAT WASHER 4x1.0 4

9 SCREW M5x12mm 1

ce900 tv bracket - spirit fitness · 2018. 11. 5. · ce900 tv bracket step three 1. assemble the...

Documents