cds inotouch surface capacitive and projected capacitive products 2015
TRANSCRIPT
• One-glass sensor on the surface of 5mm chemically strengthened glass substrate.
• Exceed industry-standard for impact resistance making it suitable for unattended, vandal-prone environments.
• This sensor's optimized design offers 88% light transmission and 66%(±2%) light transmission at rugged privacy filter.
37
37
Privacy filter rugged on Surface Capacitive (S-Cap) offers outstanding privacy protection allowing only those directly in front of the display screen to see on-screen data.
15" Surface Capacitive rugged with Privacy Filter
이노터치_전단_0812.indd 1 2014-09-12 오전 10:55:37
System Performance Mechanical(rugged privacy film)
Light transmission 66%(±2%) Dimensions 330.2mm x 204mm
Input method Finger input Glass Thickness 5mm
Accuracy >98.5% of true position 2Way Core Privacy Film Thickness 0.35mm
Resolution 2048 x 2048(maximum resolution) Pitch 61
Linearization Factory linearized Depth 145
Tail Connection Solder type Surface Scratch Hardness MoHS 7 or higher
Electronics Optical (privacy film)
Communication Serial interface Transmittance 65%
Dimensions 330.2mm x 204mm Haze 14%
Operating Currency 40 mA(typical) Chromacity(X) 0.313
Power Connection USB BUS(5V) or 5V/12V Serial Chromacity(Y) 0.32
ESD ±8KV Contact, ±15KV Air Bias Angle 11°
Report rate 180Hz Viewing Angle 60°
Response time 25 ms
Reliability
Surface Obstructions Withstand most surface contaminants
Chemical Resistance ASTM-D-1308-02 and ASTM-F-1598-95
Impact Resistance Steel ball test UL 60950
Operating Temperature -30° C to 70° C
Storage Temperature -40° C to 85° C
Humidity Up to 90% RH non-condensing
15" Surface Capacitive rugged with Privacy Filter
Specification
이노터치_전단_0812.indd 2 2014-09-12 오전 10:55:38
Privacy filter rugged on Projected Capacitive (P-Cap) with palm rejection offers outstanding privacy protection plus palm rejection functionality in public applications.
15" Projected Capacitive rugged with Privacy Filter plus Automatic Palm Rejection
• You will see or write the information on your display while people on either side only see a darkened screen.• Palm rejection enables you to drive in educational applications.
이노터치_전단_0812.indd 3 2014-09-12 오전 10:55:39
15" Projected Capacitive rugged with Privacy Filter plus Automatic Palm Rejection
System Performance Mechanical(rugged privacy film)
Light transmission 66%(±2%) Glass thickness 5mm CGS
Input method Finger input 2Way core privacy film thickness 0.35mm
Accuracy >99% of true position Pitch 61
Auto calibration Yes Depth 145
Anti-noise capability Yes Surface scratch hardness MoHS 7 or higher
Waterproof Yes
Palm rejection Yes Optical (privacy film)
Versatility in design Unlimited design Trasmittance 65%
Moire´ No Haze 14%
Chromacity(X) 0.313
Electronics Chromacity(Y) 0.32
Communication USB Bias Angle 11°
Report Rate max. 210Hz Viewing Angle 60°
Response Time 20 ms
Applicable Touch Number 2 points multi touch Controller
Power consumption Idle mode : 500mW Input voltage 3.5V~5.5V, typical 5V
Sleep mode : 28mW Operating temperature -25° C to 80° C
Power Connection USB BUS(5V) Storage temperature -25° C to 80° C
Terminal resistance Tx is less than 15 KΩ Relative humidity 95% at 60° C, RH non-condensing
Rx is less than 15 KΩ Interface USB, I²C, RS232
Resolution 2048x2048 or more
Reliability Power consumption
Active mode: max. 60mA
Surface Obstructions Withstand most surface contaminants Idle mode : 8~12mA
Chemical Resistance ASTMD-F-1598-95 Sleep mode : 2.5mW (20Hz)
Impact Resistance Steel ball test UL 60950
Liquid Resistance Normal operating when remove water
Normal operating where unwatered area
Operating Temperature -25° C to 70° C
Storage Temperature -30° C to 80° C
Condensation No in humidity rating 20%~90%
Surface hitting 1 million times
Specification
이노터치_전단_0812.indd 4 2014-09-12 오전 10:55:39
The world’s first Inotouch sensor based on silver nanowire film offers remarkable slim bezel solution like a smartphone as you experienced, high invisibility in pattern as well.
The 42” Inotouch Patterned Sensor
42" Large-Format Projected Capacitive
Comparison table
Metal Mesh
Inotouch B companyA company
Slim bezel / invisible pattern IR tube with metal case Wired pattern visible
이노터치_전단_0812.indd 5 2014-09-12 오전 10:55:41
System Performance Mechanical
Light transmission 87%(±2%) Dimensions 990.9 mm x 600.4 mm
Input method Finger input Glass Thickness up to 6mm
Accuracy >99% of true position Pencil hardness rating More than 7H(Typical)
Auto calibration Yes
Anti-noise capability Yes Controller
Waterproof Yes Input voltage 3.5V~5.5V, typical 5V
Versatility in design Unlimited design Operating temperature -25° C to 80° C
Moire´ No Storage temperature -25° C to 80° C
Relative humidity 95% at 60° C, RH non-condensing
Electronics Interface USB, I²C, RS232
Communication USB Resolution 2048x2048 or more
Report Rate max.240Hz
Power consumption
Active mode: max. 60mA
Applicable Touch Number 10 points multi touch Idle mode : 8~12mA
Power consumption Idle mode : 240mW (240Hz) Sleep mode : 2.5mW (20Hz)
Sleep mode : 2.5mW (20Hz)
Power Connection USB BUS(5V)
Terminal resistance Tx is less than 15 KΩ
Rx is less than 15 KΩ
Reliability
Surface Obstructions Withstand most surface contaminants
Chemical Resistance Test Method: ASTMD-F-1598-95
Impact Resistance Steel ball test UL 60950
Liquid Resistance when water removed
Normal operating where unwatered area
Operating Temperature -10° C to 60° C
Storage Temperature -20° C to 70° C
Condensation No in humidity rating 20%~90%
Surface hitting 1 million times
42" Large-Format Projected Capacitive
Specification
이노터치_전단_0812.indd 6 2014-09-12 오전 10:55:42
• Thicker glass touchable up to 6mm• Waterproof• Faster report rate: 240Hz. equivalent to 4ms response time• Auto calibration• Superb sensitivity without any delayed action
The Inotouch’ sensor provides customers with industry-leading solution that resolves up to 10 simultaneous multi-touch events, enabling array of choices to glass thickness up to 6mm.
The Inotouch All-round Sensors
32" Projected Capacitivewith touchable up to 6mm thickness glass
Versatile features
Waterproof
이노터치_전단_0812.indd 7 2014-09-12 오전 10:55:43
32" Projected Capacitive
System Performance Mechanical
Light transmission 87%(±2%) Dimensions 748 mm x 442 mm
Input method Finger input Glass thickness up to 6mm
Accuracy >99% of true position Pencil hardness rating More than 7H(Typical)
Auto calibration Yes
Anti-noise capability Yes Controller
Waterproof Yes Input voltage 3.5V~5.5V, typical 5V
Versatility in design Unlimited design Operating temperature -25° C to 80° C
Moire´ No Storage temperature -25° C to 80° C
Relative humidity 95% at 60° C, RH non-condensing
Electronics Interface USB, I²C
Communication USB Resolution 2048x2048 or more
Report rate 25ms
Power consumption
Active mode: max. 60mA
Applicable touch number 10 points multi touch Idle mode : 8~12mA
Power consumption Idle mode : 240mW (240Hz) Sleep mode : 2.5mW (20Hz)
Sleep mode : 2.5mW (20Hz)
Power connection USB BUS(5V)
Terminal resistance Tx is less than 40 KΩ
Rx is less than 40 KΩ
Reliability
Surface obstructions Withstand most surface contaminants
Chemical resistance Test Method: ASTMD-F-1598-95
Impact resistance Steel ball test UL 60950
Liquid resistance Normal operating when remove water
Normal operating where unwatered area
Operating temperature -10° C to 60° C
Storage temperature -20° C to 70° C
Condensation No in humidity rating 20%~90%
Surface hitting 1 million times
Specification
이노터치_전단_0812.indd 8 2014-09-12 오전 10:55:43
Inotouch helps integrators to meet the growing demand matching for the size equivalent to LCD outer dimension
Inotouch advanced silver nanowire film offers excellent optical transparency, high product quality, enabling unlimited versatility in sensor design.
Slim Borders
Silver Nanowire Film
21.5" Slim Border designed Projected Capacitive
A purpose-built sensor for applications that demand high-class services at realizing true slimness with high -performance multi-touch functionality, enabling array of choices to innovative design.
The Inotouch Purpose –built Sensors
Total tracer width : 8mm
Tracer Width : 45umTracer Gap : 35um
이노터치_전단_0812.indd 9 2014-09-12 오전 10:55:44
21.5" Slim Border designed Projected Capacitive
System Performance Mechanical
Light Transmission 86%(±2%) Dimensions 496.6mm x 295.6mm
Input method Finger input Glass Thickness 2mm
Accuracy >99% of true position Pencil hardness rating More than 7H(Typical)
Auto Calibration Yes
Anti-noise Capability Yes Controller
Waterproof Yes Input voltage 3.5V~5.5V, typical 5V
Versatility in design Unlimited design Operating temperature -25° C to 80° C
Moire´ No Storage temperature -25° C to 80° C
Relative humidity 95% at 60° C, RH non-condensing
Electronics Interface USB, I²C
Communication USB Resolution 2048x2048 or more
Report Rate max.240Hz
Power consumption
Active mode: max. 60mA
Applicable Touch Number 10 point multi touch Idle mode : 8~12mA
Power consumption Idle mode : 240mW (240Hz) Sleep mode : 2.5mW (20Hz)
Sleep mode : 2.5mW (20Hz)
Power Connection USB BUS(5V)
Response Time 20 ms
Reliability
Surface Obstructions Withstand most surface contaminants
Chemical Resistance ASTMD-F-1598-95
Impact Resistance Steel ball test UL 60950
Liquid Resistance Normal operating when remove water
Normal operating where unwatered area
Operating Temperature -10° C to 60° C
Storage Temperature -20° C to 70° C
Humidity Up to 90% RH from 0° C to 85° C
non-condensing
Specification
이노터치_전단_0812.indd 10 2014-09-12 오전 10:55:45