ccontrols - throttle & accessoriesontrols - throttle

Small Engine Parts & AccessoriesCONTROLS - THROTTLE & ACCESSORIESCONTROLS - THROTTLE & ACCESSORIES

C C

295-006 Universal

3/16″ Conduit (50 foot roll) Single wound galvanized conduit.(Use with our 295-055 Inner wire)

295-014 Universal

7/32″ Conduit (50 foot roll)Single wound galvanized conduit.(Use with our 295-063 Inner wire)

295-048 Universal

Deluxe 3/16″ Conduit (50 foot roll) Vinyl covered and plastic lined conduit. The ultimate in galvanized conduit. Black polyethylene outside wrap with clear polyethylene liner.Reduces friction - smooth action, provides weather seal - corrosion resistance. (Use with our 295-055 Inner wire).

295-055 Universal

Inner Wire (100 foot roll) Copperized inner wire for our 3/16″ Conduit cable. Wire diameter: .056″(Use with our 295-006 and 295-048 Conduit)

295-063 Universal

Inner Wire (100 foot roll)Copperized inner wire for our 7/32″Conduit cable. Wire diameter: .072″(Use with our 295-014 Conduit)

295-097 Sold in multiples of 5

3/16″ Conduit ButtonAllows easy assembly of conduit to control head. (Use with our 295-006 and 295-048 Conduit)


7/32″ Conduit Button Allows easy assembly of conduit to control head. (For use with our 295-014 Conduit)


Wire StopsHex body - wire stops with screws.Ideal for securing inner wire at the engine end.


Wire Stops Swivel wire stops with screws. Ideal for securing control inner wire to engine governor. Fits 1/4″ diameter holes.

295-196

Cable Clip For 3/4″ tube handles. Fits 3/16″, 7/32″ & 1/4″ conduit sizes. No screws required, heat treated spring steel.

295-311 MTD# 726-0178MTD# 725-0157

Cable Clip For 7/8″ tube handles.Hold all sizes of conduit ortwo separate cables. No screws required, heat treated spring steel.

295-261 B&S# 220796

Conduit Clamp Special metal tab for non-rotation.Holds conduit to engine.

295-279 B&S# 22372

Conduit Clamp Dual or Single cable application.Accommodates any size conduit.Made of plated steel with one 7/32″ diameter hole.

295-106Conduit Clamp Dual cable application.Accepts 3/16″ thru 7/32″ conduit.Ideal for securing two conduit with one bolt.

295-249

Conduit Clamp Single cable application. Accepts 3/16″ thru 7/32″ conduit. Squeeze type clamp holds conduit securely.

295-264 Universal ApplicationsWire StopUsed to repair control cables.Size: 1” overall length.3/8” OD steps down to 1/4” OD.(2) wire locking screws.

295-265 Universal ApplicationsWire Stop with 1/4” EyeletUsed to repair control cables.Size: 1” overall length. 1/4” ID eyelet.(1) wire locking screw.

295-266 Universal Applications

Wire Stop with Z-BendUsed to repair control cables.Size: 15/16” overall length with1/8” diameter Z-bend.(1) wire locking screw.

(Sold in multiples of 10)






UNIVERSAL ACCESSORIES UNIVERSAL ACCESSORIES

20-01


C C

295-067Cable Repair Kit(Universal)For push lawnmower,snow blower and manyother applications.Includes: (1) length ofbraded inner wire and(2) eyelet fi ttings and(1) Z-Bend fi tting.Fittings fasten to the inner wire with clamping screw.

290-015

Throttle Control 48″ length, all steel construction. Can be mounted on bowor ″T″ handles. Negative action.Conduit Length: 43-1/2″, Inner Wire: 48″, Wire Travel: 1-1/2″

290-288Throttle Control71″ length, all steel construction. Can be mounted on bowor ″T″ handles. Negative action.Conduit Length: 66-1/2″, Inner Wire: 71″, Wire Travel: 1-1/2″

290-064

Throttle Control 53″ length, all steel construction with plastic case and ″T″ handle, positive action control. For centre or side mounting with hole for 1/4″ bolt. Conduit Length: 51″, Inner Wire: 53″, Wire Travel: 1-1/2″

290-296

Throttle Control 71″ length, all steel construction with plastic case and ″T″ handle, positive action control. For centre or side mounting with hole for 1/4″ bolt. Conduit Length: 69″, Inner Wire: 71″,Wire Travel: 1-1/2″

290-080

Throttle Control 53″ length, all steel construction with aluminum cover plate. Positive action control, can be mounted on panel or bolted through 1/4″ centre hole. Conduit Length: 48″, Inner Wire: 53″, Wire Travel: 1-1/4″

290-023

Throttle Control55″ length, deluxe all steel construction. Positive action control, side mount. Comes complete with wire swivel, adjustable friction steel washer.Conduit Length: 51-1/2″, Inner Wire: 55″, Wire Travel: 1-1/4″

290-106

Throttle Control Used on AYP (Roper/Sears), MTD, NOMA, MURRAY andothers. 67″ length, all plastic control with galvanized inner wire. Can be mounted on bow or ″T″ handle.Conduit Length: 60″, Inner Wire: 67″, Wire Travel: 1-3/8″

290-155

Throttle ControlPanel mount control, right hand version.Used on Riding mowers, Tractors and self propelled mowers. 48″ length, all steel control with ″T″ handle.Conduit Length: 48″, Inner Wire: 60″, Wire Travel: 1-5/8″

290-163

Throttle ControlPanel mount control, left hand version. Used on Riding mowers, Tractors and self propelled mowers. 48″ length, all steel control with ″T″ handle.Conduit Length: 48″, Inner Wire: 60″, Wire Travel: 1-5/8″

290-004

Throttle Control74″ length, all steel construction, no detents. Positive action control with ″Z″ bend, mounting holes on 2″ centres. Conduit Length: 72″, Inner Wire: 74″, Wire Travel: 1-7/8″

UNIVERSAL UNIVERSAL continued

20-02


C C

290-002*OUR MOST POPULAR* Throttle Control - Universal design- Converts from positive to negative action- 1/4″ bolt handle bar mount- 71″ conduit- 76″ inner wire- 1-5/8″ wire travel- Plastic conduit cuts easily to replace application listed below.- Adjust control to full position (+ = longest, - = shortest)for innerwire measurement

OEM# Conduit Length

Action InnerwireExtension

JOHN DEEREAM115246 53-3/8″ + 2-1/4LAWN BOY684693 52-1/2″ + 1-1/2″MURRAY4209642775428774287842949

41-1/4″42-1/2″41-1/4″47-1/2″39″

+++++

2″2″2″2″2″

NOMA5206152769

46-1/2″46-1/2’

++

1-1/2″1-1/2″

ROPER / SEARS107701X111274X111903X111930X

43″47″44″65-1/8″

++++

2-1/41-3/42″2-1/8″

TORO27-650028-481028-617028-674029-961029-961233-253033-253133-253233-253333-253433-253533-253640-552040-552140-552240-552340-552440-552540-552653-7831

42″54-1/2″59″38″44-1/2″44-1/2″38″42″59″49″54-1/2″39-1/2″62″42″38″54-1/2″62’45″49-1/2″35-1/2’46-1/2″

+++++++++++++++++++++

2″2″2″2″2″2-1/8″1-7/8″1-7/8″1-7/8″1-7/8″1-7/8″1-7/8″1-7/8″1-7/8″1-7/8’1-7/8″1-7/8’1-7/8″1-7/8″2″3-7/8″

290-105Throttle ControlEconomy Push Pull control for engine speed or choke control. Fit many types of equipment, including Bobcat. Positive action control. Conduit length: 60″,Inner wire length: 63″, Wire travel: 2-3/4″

290-006

Throttle / ChokeControl (Universal)Light duty dash mountcontrol for throttle, chokeand others. This locking control is easyto install. Installation hole: 9/16” diameter. Versatile locking control eliminates vibration problems. Max push load: 10 lbs, Max pull load: 25 lbs. Conduit length: 92-1/2”, Inner wire diameter: .060”

290-008

Choke / Tthrottle Control (Universal)Economical dash control for choke, throttle and others. This panel mount control is easy to install. Installation hole: 13/32” diameter. Max push load: 10 lbs, Max pull load: 25 lbs. Conduit length: 95”, Inner wire diameter: .060”, Conduit Size: 3/16”.

290-148Throttle Control This heavy dutynon rotationallocking controlhas a variety of industrial uses. By turning ″T″ knob ¼ turn, control locks securely against spring tension and vibration. Installation hole: 9/16″, Max push load: 20 lbs, Max pull load: 50 lbs, Conduit length: 92-1/2″, Inner wire diameter: .080″, Conduit size: 1/4″

ARIENS290-320 69087

Throttle Control Fits rear engine Riderswith Tecumseh engines.Vinyl wrapped conduit.

Conduit length: 38-7/8″,Inner wire length: 39-7/8″, Wire travel: 1-1/2″(Use with our 295-410 ″T″ control knob)

290-338 69127

Throttle Control Fits 1980 and up 28″, 30″ &32″ rear engine Riders with Briggs and Stratton engines. Vinyl wrapped conduit.

Conduit length: 44-7/8″, Inner wire length: 46-7/8″,Wire travel: 1-1/2″(Use with our 295-410 ″T″ control knob)

(While Quantities Last)

UNIVERSAL continued UNIVERSAL continued

20-03


C C

290-112 69080 06908000

Throttle ControlFound on Ariens, Murray / Noma snowblowers. Conduit length: 30-1/4″, Inner wire length: 33″, Conduit size: 3/16″, Inner wire size: .055″, Wire travel: 1-3/4″.

295-410 75019Bolens# 1719268Troy Bilt# 9212

″T″ Control KnobFits most control heads.Fits our 290-320 and 290-338 throttle and others.

290-328 69032

Throttle Control Fits Snowblower models: 10954, 10962, 10965, 10969 and 10970. Negative action ″F″ to ″S″, bracket for side mounting.Conduit Length: 27-1/8″, Inner wire length: 29″,Wire travel: 1-3/4″

285-483 06900011

Traction control cable For Ariens snowblowers. Fits models: 926001 / 002 / 003 / 004 / 005 / 006 / 007 / 008 / 009 / 010 / 011 / 012 / 013 / 014 / 015 / 016 / 017 / 021 / 022 / 023 / 024 / 025 / 026 / 027 / 101 / 102 / 103 / 300 / 301 / 302 / 303 / 304 / 305 / 306 / 307 / 308 / 310 / 311 / 312 / 313 / 314 / 315 / 316 / 500 / 501 / 502 / 504. Overall Adjustable Length: 38-1/2″ to 39-1/4″, Coil Length: 4-1/4″ (Adjustable end), Coil Length: 4-5/8″ (fi xed end).

285-484 06900012

Clutch blower control cable For Ariens snowblowers. Fits models: 926001 / 002 / 003 / 004 / 005 / 006 / 007 /008 / 009 / 010 / 011 / 012 / 013 / 014 / 015 / 016 / 017 / 021 / 022 / 023 / 024 / 025 / 026 / 027 / 101 / 102 / 103 / 300 / 301 / 302 / 303 / 304 / 305 / 306 / 307 / 308 / 310 / 311 / 312 / 313 / 314 / 315 / 316 / 500 / 501 / 502 / 504. Overall Adjustable Length: 25-1/4 to 26″, Coil Length: 4-1/4″, Eyelet hole ID: 1/4″.

285-485 06900018

Chute control cable For Ariens snowblowers. Fits models: 921001 / 002 / 003 / 004, 921300 and 921301, 926016 / 017 / 021 / 022 / 023 / 302 / 310 / 311 / 312 / 313 / 314 / 315 / 316 / 500 / 501 etc. Measures: 61-3/8″ Overall Length, Wire Travel: 5-3/8″, Eyelet hole ID: 1/4″.

285-486 06900019

Chute control cable For Ariens snowblowers. Fits models: 921002 / 003 / 004, 301, 926001 / 002 / 003 / 004 / 005 / 006 / 007 / 008 / 009 / 010 / 011 / 012 / 013 / 014 / 015 / 016 / 017 / 021 / 022 / 023 / 101/ 102 / 103 / 300 / 301 / 302 / 303 / 304 / 305 etc. Measures: 54″ Overall Length, Wire Travel: 2″, Both Ball Ends: 1/4″ diameter.

AYP / HUSQVARNA290-018 700417 / 532 70 04-17

Throttle Control 48″ length, plasticconstruction. Can bemounted on bow or ″T″ handles. Fits 20″ & 22″ side and rear discharge mowers. Conduit Length: 48″, Inner Wire: 49-1/2″

290-079 851462 / 182158532 85 14-62

Throttle ControlFor 20″ walk behind mowers,1997 and later.Conduit Length: 63-1/2″, Overall Length: 68″

285-003 130861532 13 08-61

Zone Control CableFor 22″ walk behind pushmower model PP751.

Die cast Z-bend on both ends.52″ Conduit length X 59-3/16″ Cable length.

ARIENS continued ARIENS continued

20-04


C C

285-001 169676 / 175067 / 192413 532 16 96-76 / 532 17 50-67532 19 32-35

Deck Engagement / PTO Cable without PIN

Fits on many ridersbuilt by AYP. Found on 42″ riders;also replacesAYP# 192413 foundon Sears model YT3000 (model 942-605911),22 Hp with 42″ cut.

Fits LT16542, LT18542, LT18542A, LT18542B, LTH1342, LTH1342A, LTH1342B, LTH1342C, LTH1742A, LTH1742B, LTH1742C, LTH1742D, LTH18542A, LTH18542B, LTH18542C, LTH2042A, LTH2042B, LTH2042C, YTH130, YTH1842A, YTH1842B, YTH1842C. Conduit Length: 32″, Overall Length with Spring: 45-1/4″, Spring Length: 6”.

285-000 435111 / 408714 / 197257532 19 72-57 / 532 40 87-14 532 43 51-11 / John Deere# GY20156

Deck Engagement / PTO CableFits on many riders built by AYP. Found on 38” and 42” riders. Fits CT126, LTH1438, LTH1538, LTH18538, YT16542, YT1942; models: LT2223A2, LZ11577, LZ11577HRB, LZ11577RB, P11577, P11577RB, P12510H, P145107HP, P18510H. NOTE: Also will work on JOHN DEERE L100 series tractors. Conduit Length: 59”, Overall Length with Spring: 74-5/16”, Spring Length: 5”.

285-651 170300 / 176074 / 075401532 17 60-74 / 583 07 54-01

Deck Engagement Cable

For 36”, 38” & 42” decks on Husqvarna rear discharge riders. Conduit Length: 18”, Overall Length: 34-3/4”, Spring Length: 6-1/8”.

285-652 176079 / 075601583 07 56-01

Deck Engagement Cable

For 36”, 38”, and 42” Rear Discharge. Fits LT125, LT151 and LTH151. Conduit Length: 31”, Overall Length: 44”, Spring Length: 6-1/8”.Clutch Cable replaces Husqvarna Blade Engagement Cable (Noram Clutch).

285-650 408319 / 435110 532 43 51-10 / 532 40 83-19 592 34 35 110

Deck Engagement CableFor 42” & 46” decks on Husqvarna models: YTA,LTH, YTH series tractors.Fits AYP / HUSQVARNA models:YTH2042, YTH2246, YTH20K46.Conduit Length: 58”,Overall Length with Spring: 74”, Spring Length: 5”.

285-008 169676 / 175067532 16 96-76 532 17 50-67

Deck Engagement / PTO Cable with PINFound on many riders built by AYP. Fits LT16542, LT18542, LT18542A, LT18542B, LTH1342, LTH1342A, LTH1342B, LTH1342C, LTH1742A, LTH1742B, LTH1742C, LTH1742D, LTH18542A, LTH18542B, LTH18542C, LTH2042A, LTH2042B, LTH2042C, YTH130, YTH1842A, YTH1842B, YTH1842C. Conduit Length: 32”, Overall Length with Spring: 45-1/2”, Spring Length: 6”.

285-560 428311 / 532 42 83-11

Chute Control Cable For AYP / Craftsman / Husqvarna / Sears snowblowers. Models 2009 on. (Includes a heat resistant conduit cover = 14″ long approximately).Measures: 45-3/4″ Overall Length, Conduit Length: 31-3/4″, Wire Travel: 11-3/4″.

285-562 428274 / 532 42 82-74

Chute Control Cable For AYP / Craftsman / Husqvarna / Sears snowblowers. Models 2009 on. Measures: 46-1/2″ Overall Length, Conduit Length: 32-7/8″, Wire Travel Adjustable: 11″ thru 11-3/4″.

285-564 178674 / 198475 / 421164 532 17 86-74

Chute Control Cable For AYP / Craftsman / Husqvarna / Sears snowblowers. Cable only. Measures: 59-1/4″ Overall Length, Conduit Length: 50-3/4″, Inner Wire Length: 57-1/2″, Wire Travel: 3″, Eyelet hole ID: 5/16″ with a Cast Z-Bend on the other.

AYP / HUSQVARNA cont. AYP / HUSQVARNA cont.

20-05


C C

285-004 156577 / 156581 / 168552

Control CableEngine Brake Control Cable. Conduit Length: 54″, Inner Wire Length: 60″, Wire travel: 6″, Heavy ″Z″ bend on each end.

285-010 194653 / 532 19 46-53

Control CableDrive Control Cable. Found on AYP / Husqvarna / Sears / Craftsman mowers. Conduit Length: 55”, Overall Length: 67”. Heavy “Z” bend on one end, spring on the other.

285-690 133107 / 532 13 31-07

Zone Control CableFor AYP built walk behind push mowers (1999 thru 2004). Die cast Z-bend on both ends. Conduit length: 56” X Cable length: 62”.

285-691 162778 / 176556 532 17 65-56 / 532 16 27-78

Zone Control CableFor AYP built walk behind push mowers built 2006 thru 2010. Fits models: PO500N21R, PR160N21CHC, PR4N22SHA, PR550N21RH3, WM500N21R and XT625N21RN3. Die cast Z-bend on both ends. Conduit length: 45” X Cable length: 52”.

285-692 183281 / 532 18 32-81

Zone Control CableFor AYP built walk behind push mowers (2005 thru 2010). Fits model: 212310X83E. Die cast Z-bend on both ends.Conduit length: 46-1/2” X Cable length: 52-1/2”.

285-693 183567 / 532 18 35-67

Zone Control CableFor AYP built walk behind push mowers (2005 thru 2010). Fits models: 5521CHV, 5521RS, 52522SH, 6522SL, 65021CHV and 214502X83E, 319611X83E, 219611X83E, 37611, PH65Y21RHP, PR160Y21RPC, PR173Y22RP, PR600T21RHP, PR600Y21RHPX, PR600Y21RHP, PR600Y22RHP, PR625Y22RHP, PR625Y22RHPX, PR7R21A, PR7R21B, PR7R21C, XT600Y21RP, XT625Y22SHP. Die cast Z-bend on both ends. Conduit length: 53-1/2” X Cable length: 59-1/2”.

285-620 175148 / 532 17 51-48

Control CableFound on AYP / Husqvarna / Sears / Craftsman push mowers. Fits AYP models: 961240002, 96124000201, 96124000300, 96122002000, 96122001900 and 96122002700.Conduit Length: 52”, Inner Wire Length: 59-1/2”,Wire travel: 5-3/8”, Heavy “Z” bend on each end.

285-688 415350 / 532 41 53-50

Zone Control CableFor AYP built walk behind push mowers. Models: ASM ZO. Die cast Z-bend on both ends.Conduit length: 45” X Cable length: 51-3/8”.

285-689 427497 / 532 42 74-97

Zone Control CableFor AYP built walk behind push mowers. Found on Craftsman, Husqvarna, Poulan and others. Model: MZR 50 SNAP IN. Husqvarna 7021 RC and 7021 RH, 2009-2012; HD775HW, 2010-2011; HD800HW, 2012-2013; HU700L, 2003-2013; HU725AWD and HU775AWD, 2011-2013; HU725E, HU775H and HU800H, 2002-2013; HU800AWD and LC 356V, 2010-2013. Die cast Z-bend on both ends. Conduit length: 49” X Cable length: 55-1/2”.Wire Travel: 4-3/4”.

285-696 420939 / 532 42 09-39583 38 42-01

Zone Control CableFor AYP built walk behind push mowers.Model: MZR FG from Sears. Husqvarna HU550F, (2002 - 2013), HU550FH, (2011 - 2012); HU725F, (2012 - 2013); and HU725FH, (2012 - 2013). Conduit length: 43-5/8” X Cable length: 51-1/2”.Heavy “Z” bend on both ends, Snap clap with extra Conduit holder.


20-06


C C

285-698 440934 / 532 44 09-34

Zone Control CableFor AYP / Sears / Craftsman models: MZR RATO; 22” LOW WHEEL 11. For AYP built walk behind push mowers. Husqvarna 6021 P, (2001 - 2012); 7021 P, (2002 - 2013); and LC 153, (2010 - 2013). Die cast Z-bend on both ends. Conduit length: 46-3/4” X Cable length: 53-3/4”.

285-699 158152 / 532 15 81-52

Zone Control CableFor AYP / Craftsman / Husqvarna / Poulan / Weedeater and others. Fits AYP models: 224110X92E0, 2244110X92E2, 224111X83E,96114001500, 96114001501, 96114011800, HD6A22HWD, PR600N22S, PR600N22SH, 96114000311,96114000312, 96114000313, 96114000314, 96114000315, 96114000316, 96114000317, 96114000403, 96114001200. Die cast Z-bend on both ends.Conduit length: 48-1/2” X Cable length overall: 55-5/8”. Wire Travel: 5-3/8”.

285-013 191221 / 532 19 12-21

Zone Control CableFor AYP / Craftsman / Husqvarna / Poulan / Weedeater and others. Fits AYP models: PR160Y21RDP and PR600Y21RDP (2001 thru 2008). Fits Husqvarna models: 21” Multi Cut (2002 thru 2008); 917.375830 and 7021 RS (2001 thru 2006); 5521 RS (2001 thru 2011); and 6521 RS (2003 thru 2009). Die cast Z-bend on both ends.Conduit Length: 54-1/2”, Overall Length: 62”.

285-011 181699 / 532 18 16-99

Control CableFor AYP / Craftsman / Husqvarna / Poulan / Weedeater and others. Fits AYP models: PPWT60022 (2009 thru 2011) and PPWT60022X (2004 thru 2010).Fits Husqvarna models: HU 625 WT (2009 thru 2011).Conduit Length: 39-1/2”, Overall Length: 57-1/2”.Heavy “Z” bend on one end, spring on the other, Snap clap.

285-012 424033 / 961440005532 42 40-03 / 583 40 95-01

Control CableFor AYP / Craftsman /Husqvarna / Poulan / Weedeater and others.Conduit Length: 43-1/2”, Overall Length: 51”. Heavy “Z” bend on both ends, Snap clap with extra Conduit holder..

285-694 407816 / 532 40 78-16

Drive Control CableFor AYP built self-propelled walk behindpush mowers. Fitsmodels: 96142003700,96142006900, 96142008400,96142008401, 96143006105,96143008001, 96143005800 and 961430061. Die cast Z-bend on one end with a spring on the other. Conduit length: 59-1/2” X Cable length: 68-1/2”.

285-695 189182 / 532 18 91-82

Drive Control CableFor AYP built self-propelled walk behind push mowers. Fits models: 96143000100 & 954223883. Die cast Z-bend on one endwith a spring on the other.Conduit length: 59” X Cable length: 68-3/4”.

285-005 146323 / 184596 / 700615

Drive Control & Cable Fits 22” self-propelled walk behindmowers. Flexible inner wire withspring on end, Z-bend on spring.Conduit length: 56” X Overall Length with Spring: 59-3/4”. Wire travel: 3”.

285-009 145755 / 184588532 14 57-55 / 532 18 45-88

Drive Control & Cable Fits self-propelled mower models: 219611X83E, 961240001, 96143000601, 96143000600, 95424095, 9612001802. Flexible inner wire with spring on end, Z-bend on spring. Conduit Length: 57” XOverall Length with Spring: 60-3/4”. Wire travel: 3”.

290-635 87025133049

Drive Control & Cable Z-bend on end withthreaded adjustment. Conduit Length: 59-1/2”, Inner Wire Length: 62”.

290-090 187768 / 189541 / 187768X505532 18 77-68 / 532 18 95-41

Choke Control Cable (BLACK KNOB). Fits AYP / Husqvarna / Poulan lawn mowers.Conduit length: 41-1/2, Inner Wire Length: 44”, Wire Travel: 2”. (OEM# 187768X505 has a Red Knob).


20-07


C C

290-241 131922 / 532 13 19-22

Throttle ControlFits AYP and Husqvarna equipment.Conduit Length: 57-1/4″, Inner Wire Length: 59″

290-237 851250 / 851669532 85 12-50 / 532 85 16-69

Engine Control CableFits AYP & Husqvarna equipment. ″Z″ bend on each end.Conduit Length: 53-3/8″, Cable Length: 60-3/8″.

BOBCAT290-410 118020-07

Throttle ControlFits medium size walk behindversa deck with 14 HPKawasaki engine.(New Style - Long Handle)Conduit length: 29″, Inner Wire Length: 31-1/2″, Wire travel: 1-5/8″

BRIGGS & STRATTON295-089 290568 / 691028

Control HeadFits models 28B702, 28B707, 28D707and 28M707. Head assembly only. Includes: wire swivel and threaded conduit button for 3/16″ conduit. (For Briggs ″conduit clips″ - see page 20-01)

285-589 1502113MA

Drive Control Cable For Murray / Briggs and Stratton snowblowers. FR-DR P7 5-13B. Measures: 31-1/4″ Overall Length, Cast Z-Bends on both ends.

287-001 761131 / 761131MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 69-1/2″ Overall Length, Conduit Length: 62″, Wire Travel: 5-1/4″, Eyelet hole ID: 5/16″.

287-002 761775 / 761775MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 63-3/4″ Overall Length, Conduit Length: 57-1/2″, Wire Travel: 3-1/4″, Eyelet hole ID: 5/16″with a Cast Z-Bend on the other.

CUB CADET - see MTDEXMARK290-800 109-8165

Choke Control Assembly

Fits Exmark Lazer Z modelsequipped with KOHLER engine.

Conduit length: 33-1/4”, Inner Wire Length: 35-5/8”,Wire Travel: 1-1/2”. (2) Mounting hole on 1-3/4” Centres.

290-801 109-8167

Choke Control Assembly

Fits Exmark Lazer Z modelsequipped with 29 HPKAWASAKI engine.

Conduit length: 50-1/4”, Inner Wire Length: 52-3/4”, Wire Travel: 1-1/2”. (2) Mounting hole on 1-3/4” Centres.

290-802 109-9147

Choke Control / Choke Cable

For EXMARK model: Quest,Serial No# 720,000 and higher.Conduit length: 53-5/16”,Inner Wire Length: 55-5/8”.

290-795 6336961-633696

Throttle ControlFits Lazer Z models; also fi tsMetro HP, Turf Tracer, Viking, Lazer & Turf Ranger.Conduit length: 54″, Cable Length: 56-1/4″

AYP / HUSQVARNA cont. BRIGGS & STRATTON

20-08


C C

290-799 6033361-603336

Choke Control

Fits models 52″ & 60″Turf Tracer hydro driveunit fl oating decks. (Positive Action).Conduit length: 54″, Cable Length: 58-3/4″

285-488 103-2683

Blade Brake CableFits Exmark self propelled mowers. Found on Exmark Metro Commercial 21, 21” Heavy Duty Recycler / Rear Bagger lawnmower, 2007 (Exmark SN 370,000 thru 439999). Conduit Length: 60-5/8”, Inner Wire Length: 66”, Wire Travel: 4-3/8”. Overall Length: 68”. Metal Z-Bend on one end with a rectangular female on the other.(See TORO / WHEEL HORSE heading)

290-797 116-0969

Throttle Control AssemblyFits Exmark models: Lazer Z AS S/N 790,000-849,999; Lazer Z E Series (27 HP) S/N 920,000 & Up; Lazer Z E Series (model 730-740) S/N 312,000,000 & Up; Lazer Z S Series (23-29HP) S/N 920,000 & Up; Lazer Z S Series (model 680-749) S/N 312,000,000 & Up; Lazer Z X Series (23-38HP) S/N 920,000 & Up; Lazer Z X Series (model 680-980) S/N 312,000,000 & Up; Next Lazer Z ASX S/N 850,000 & Up; Next Lazer Z Air Cooled S/N 790,000 & Up. Conduit Length: 53-1/2”, Inner Wire Length: 56”.

HONDA260-301 54630-VK6-010

Transmission Control Cable Fits Honda models:HRC216K2 HXA andHRC216K3 HXA (All years).

Conduit Length: 40-3/4”, Overall Length: 47”.

260-302 54510-VB5-800Code# 2963627

Transmission Cable For 21″ walk behinds. Fits models HR21, HRA216 from 1988 thru 1991, HRC 216 from 1992 and newer with 2 speed transmission and HRC216K1SXA.Conduit Length: 44-1/2″, Overall Length: 49-1/2″

260-303 54520-VA3-801Code# 1618057

Transmission CableFits model HR214 walk behinds. Conduit length: 42-1/8″,Inner wire: 44-3/4″ Wire Travel: 2-5/8″

260-327 54520-VA3-P0354520-VA3-P04Code# 4059085

Transmission Cable Fits models HR215HXA & HR215K1HXA.Conduit length: 42-3/4″, Inner wire: 47-1/2″. Wire Travel: 3-3/4″

260-314 54520-VB5-P00 54520-VB5-P01 Code# 7780505 / 3430261

Transmission Cable Fits models HRC216K1HXA and HRC216HXA.Conduit length: 42-3/4″, Inner wire: 47-5/8″,Wire Travel: 3-1/2″

260-306 17910-VA3-00317910-VA3-S01Code# 1660281

Brake Cable Fits models HR194, HR214, HR215 and HR216. For 4 and 5 Hp engines. Conduit length: 53-1/2″, Overall Length: 57-1/4″. Thread Length: 1-3/32″.

260-316 54530-VG3-D01

Brake Cable Fits HONDA models: HRR216, HRS216, HRT216.

Conduit length: 43-1/4″, Inner Wire Length: 49-1/2, Wire Travel”: 5-1/2”Z-Bend on both ends.

260-318 54530-VK6-700

Brake Cable Fits HONDA models: HRC216K2 and HRC216K3.

Conduit length: 43-1/2”, Inner wire length: 54”, Wire Travel: 9-5/8”.Z-Bend on both end with adjustable thread on one end.

EXMARK continued HONDA continued

20-09


C C

260-322 54530-VA3-J0154530-VA3-J03Code# 3451002 / 4909818

Blade Stop CableFits models HR215SXA, HXA, K1SXA, K1HXA, HRC215, K1SDKA, HRC216HXA, SXA, K1HXA and K1SXA.Conduit length: 54″, Inner wire length: 65″, Wire Travel: 9″.

260-323 54530-VE0-003Code# 4010583

Blade Stop CableFits models HRB21SXA, HRB215K1SXA & HRB215K2HXA. Conduit length: 45″, Inner wire length: 54-3/4″, Wire Travel: 9-1/4″

260-325 54530-VK6- 000 / 54530-VK6-003 Honda Code# 7869571

Blade Stop CableFits Honda models:HRC216K2 K3 HXA.HRC216K2HXA HRC216K3 HXA,Conduit length: 40-1/2”, Inner wire overall length including eyelet and barrel ends: 46-5/8”,Wire Travel: 3-3/8”.

260-324 54530-VB3-80254530-VA4-010Code# 2813327 / 2660645

Blade Stop CableFits models HR214SXA and HRA214SXA.Conduit length: 53″, Inner wire length: 68-1/2″Wire Travel: 10″

260-297 54510-VG4-C01

Clutch Cable Fits models: HRRK216K, HRT216K and HRZ216.Conduit length: 49”, Total length: 57-1/2”.

295-304 16516-891-00016576-891-000

Conduit Clip for HONDAFits engine models:GX110, GX120,GX140, GX160, GX240, GX270, GX340 & GX390

HUSQVARNA - see AYPJOHN DEERE285-121 GY20156/GY21106

Control CablePTO control cable. Fits John Deere L100 series tractors. Measures: 76” inner wire including spring and eyelet. Conduit Length: 58”, Wire Travel: 17”,Innerwire diameter: .062”.

285-120 AM107139GC00578

Shift Control Cable Fits 21” walk behind mowers JA65, JE75, JX75 and JX85. Conduit Length: 43”,Inner wire length: 46, Wire Travel: 3”

LAWN BOY (also see TORO heading)

290-205 682685

Control CableFits 21″ self propelled steel decks, rear discharge models. Conduit length: 55-1/4″, Inner wire length: 64-1/4″. Eyelet ID: 5/16

285-966 1048677Toro / Wheel Horse 1048677

Blade Brake CableFits LAWN BOY & TORO 22” Recycler. Fits models: 20001, 20003, 20005, 20007, 20008, 20009, 20012, 20016, 20019, 20069, 20071, 20072, 20094, 20636, 20990 and 20995.Conduit Length: 49” X Cable Length: 58-1/2”, Heavy “Z” bends on both ends.


HONDA continued HONDA continued

20-10


C C

285-969 112-8817

Traction Control Cable Fits 20” Recycler 20314,20316, 29639, 29641, 29642and 29643.

Conduit length: 34″, Overall Length includingSpring: 47-1/2”Spring Length: 2-1/2”, Wire Travel: 10-1/4”Heavy Z-Bend on one end with spring on the other.

MTD / CUB CADET295-170 811-0185 / 811-00303

811-00500

Throttle Control Head AssyIncludes: MTD# ‘s746-0875 and 746-0876. For use with our 295-545,547, 552, 555, 558 and 561throttle cables.

295-168 831-0796A / 831-0823A

Throttle Control Head AssemblyFits models 132-657-F062, 139-652-352 riders with 36”, 38” and 46” CUT DECKS.

295-552 746-0845

Throttle Cable Fits 1992 and later push & self propelled mowers with Tecumseh engines. Fits models: 081, 085, 087, 232-238, 280, 281, 282, 413, 415, 423, 425, 460, 478, 50, 508, 516 & 518. Conduit length: 45″, Inner wire length: 47-3/8″ Z-bends on both ends. Wire travel: 2-5/8″

295-555 746-0843 / 746-0671A

Throttle Cable Fits 1992 and newer push & self propelled mowers with Briggs and Stratton engines. Fits models:083, 088, 123-238, 246, 328, 338, 414, 416, 418, 424,426, 428, 446, 448, 456, 458, 460-479, 488, 518, 528. Conduit length: 55-3/8″, Inner wire length: 57-3/4″ Z-bends on both ends. Wire travel: 2-1/2″

295-558 746-0842

Throttle Cable Fits 1992 and newer push mowers with Briggs and Stratton engines. Fits models 030-042, 050-063, 070-088, 092-098, 108-206, 260-265, 280, 281, 282, 440, 442, 450, 452, 460, 479, 500-508 and 570.Conduit length: 51-1/4″, Inner wire length: 53-5/8″Z-bends on both ends. Wire Travel: 2-1/2″

295-569 746-0638 / 746-0776

Throttle Cable Fits 1995 thru 1998 MTD riders models 135 and 136 with Briggs engines only. Conduit length: 18-1/2″, Inner wire length: 21-1/2″. Z-bends on both ends,Wire Travel: 2-1/4″

295-557 746-0630746-0630A

Throttle CableFits walk behind mowers.Conduit length: 37″, Inner wire length: 42″. Z-bends on both ends

295-518 746-0847 / 746-1115 / 946-0847946-1115

Throttle CableFits models 12A-998Q401, 11A-418Q118 and 12A378Q118 Yardman. Conduit length 42″, Z-bend on end,Inner wire length: 44-1/2″, Wire travel: 2-1/2″.

295-545 746-0474 / 746-0632 / 946-0671Wards# 90144855

Throttle Cable For walk behind and self propelled walk behind mowers that require a 53″ green tip.Conduit length: 53-1/2″, Inner wire length: 56-3/8″. Z-bends on both ends. Spring length: 8-1/2″, Wire travel: 2-3/4″

295-547 746-0672 / 946-0672 / 946-0674AWards# 90185780

Throttle Cable For walk behind and self propelled walk behind mowers that require a 58″ yellow tip. Conduit length: 58″, Inner wire length: 60″ Z-bends on both ends. Spring length: 8-1/2″, Wire travel: 2-1/2″

LAWN BOY continued MTD / CUB CADET cont.

20-11


C C

295-561 746-0674Wards# 90265520

Throttle CableFor walk behind and self propelled walk behind mowers that require a 61″ black tip. Conduit length: 61-3/8″, Inner wire length: 64-3/8″. Z-bends on both ends.Spring length: 8-1/2″. (While Quantities Last).

295-855 746-0634 / 746-0634A / 946-0634Wards# 90148877

Throttle Cable Fits MTD models 600-609, 660-669, 670-679, 690-699, series tractors with twin cylinder engines. Also fi ts series 820-829 and 840-849 tractors. Conduit length: 35″, Inner wire length: 38″. Z-bends on both ends.Wire travel: 3″.

290-049 MTD# - - - - Murray# 22058Murray# 42775Noma# 52087

Throttle Control Fits MTD and many others.This is a universal positive action plastic control head, sliding lever type. Conduit length: 44″, Inner wire length: 47″. (While Quantities Last).

290-106 MTD# - - - - - - -Throttle ControlFits MTD and many others.All plastic controls come with galvanized inner wire.Used on MTD, AYP, Air Cap, Murray & many others.Wire travel: 1-3/8″. Conduit length: 60″,Inner wire length: 67″

290-024 746-1086 946-1086

Throttle Control Fits lawn tractors with Briggs and Stratton Intek engines built from 1999 through 2002. Conduit Length: 42″ X Inner wire length: 45″, ″Z″ bend on end.

290-037 746-04352 / A946-04352 / A

Thtottle ControlFits some Cub Cadet GT1554, LT1042, LT1054, LT1046, LT1050, SLT1550, SLT1554, SLTX1050 with Kohler engines (2007 thru 2009) and RZT-L50KW, RZT-L54KW (2013).Overall Length: 39-5/8” X Conduit Length: 38”.

285-423 746-0970946-0970

Brake Cable For Cub Cadet / MTD mowers. Cub Cadet Zero turn models: RZT17, RZT22, RZT42, RZT50. (2005 thru 2006) with 50” cut decks. Overall length: 5-3/4”.

295-804 746-0968946-0968

Deck Lift Cable Fits MTD mowers.Lanyard cable with swivel pins.Length: 17″.

285-401 746-0553946-0553

Safety control cable Fits 1991 and newer pushmowers with Briggs engines. Models 030-042, 030-414, 030-416, 030-418, 030-424, 030-426,030-428, 030-446, 030-448, 030-456, 030-458,030-506, 030-508, 030-570 and 030-580.Conduit Length: 36-7/8″ X Cable Length: 43-1/8″,Heavy ″Z″ bends on both ends.

285-407 746-0550946-0550

Safety control cableUsed on push mower models 040, 050, 060, 070, 080 and 090. Used on self - propelled models 100, 200, 400 and 700. 1985 to present.Conduit Length: 40″ X Cable Length: 46-3/8″Heavy ″Z″ bend on both ends.

285-400 746-1113 / 946-1113

Safety control cable For MTD / Cub Cadet / Troy Bilt equipment. Conduit Length: 37-3/8″ X Cable Length: 51″, Wire Travel: 12″; Heavy ″Z″ bends on both ends.

285-612 746-0554

Safety control cableUsed on MTD mowers. Fits 1990 thru 1996 walk behind model series 300, 400 and 500. For 1998 & up model series 070 & 100. For 1990 & up self propelled model series 300, 400 & 500.Conduit Length: 40-1/2″ X Inner Wire Length: 47″,Wire travel: 4-5/8″.Push in clips with heavy ″Z″ bends on each end.

MTD / CUB CADET cont. MTD / CUB CADET cont.

20-12


C C

285-617 746-1132 946-1132

Safety control cableUsed on MTD mowers. Fits walk-behind mowers. Conduit Length: 40-3/4” X Inner Wire Length: 54”, Wire travel: 12”. Push in clips with heavy “Z” bends on each end.

285-611 746-0551 / 946-0551

Safety control cableUsed on MTD mowers. Fits model 440, E466 & 469 series. Conduit Length: 43″ X Inner Wire Length: 49-1/2″,Wire travel: 4-3/4″. Push in clips with heavy″Z″ bends on each end.

285-603 746-0552 / 946-0552

Safety control cable Used on push mowers. Push in clips with heavy ″Z″ bend on each end. Replaces blue cable.Conduit Length: 49-7/8″ X Cable Length: 55-1/2″.Wire travel: 5″

285-613 746-0737 / 946-0737

Safety control cableUsed on MTD mowers. For 1994 thru 1997 walkbehind model series 070, 080, 100, 200, 400 & 500.Conduit Length: 51″ X Inner Wire Length: 55-1/2″,Wire travel: 4-5/8″. Push in clips with heavy ″Z″ bends on each end.

285-408 746-0555946-0555

Safety control cable / Engine brake cable.For MTD model 573, 20″ deck, model 370-379, model 445, 21″ rear discharge. Conduit: 55″, Inner Wire: 61-1/2″Push in clips with heavy ″Z″ bend on each end.

285-409 746-0946 / 946-0946

Engine Stop CableFits most MTD side discharge mowers 1986 and prior. Snap fi t to handle.Conduit Length: 48-1/4″ X Cable Length: 60-1/4″,Heavy ″Z″ bend on both ends.

285-386 746-0957 / 946-0957

Engine Stop CableFits MTD built; 2000 & up walk-behind model series 020, 080, 500. Snap fit to handle.Conduit Length: 37-1/4” X Cable Length: 51-1/4”,Heavy “Z” bend on both ends.

285-444 946-05124 / 946-05124A746-05124

Control CableFits Craftsman models: T1000, T1200, T1300, T1400, T1500, T1600; 13A2775S000, 247.203703 (13A277XS099), 247.20372.3 (13A278XS099), 247.203723 (13A278XS099), 247.203773 (13A278XS299), 13AD775S059, 247.203733 (13AD78XS099), 247.203743 (13AL78XT099), 247.203744 (13AL78XT099), 247.203753 (13AL78XT299), 13AM775S000, 13AM775S200, 247.203761 (13AP78XS099), 247.203791 (13AP79XT099), 13AX795S004, LT4200 (13W2775S031), LT4200 (13W2775S231), CLT42G (13A277KS897), CLT42H (13A879KS897), CLT46CVT (13A878KT897), M115-42 (13AM775S058). Conduit Length: 23-1/2”, Inner Wire Length: 33-1/2”, Wire Travel: 7” approximately. Overall Length with Spring: 41”. Spring Length: 6-1/8”. Cast Eyelet on one end and spring on the other.

285-550 946-04661 / 946-04661A

Control CableUsed on several 21” Push Lawnmowers including YARDMAN, YARD MACHINE, HUSKEE, MTD, etc. Conduit Length: 36-1/2”, Total Length: 51-1/2”, Heavy “Z” bends on both ends. Snap-on handle fi t.


20-13


C C

285-402 746-1130 / 946-1130

Safety control cableFits MTD models 22” deck, series 038, 2003 thru 2007. Fits walk behind mower 11A-439Q710 (2006). Conduit Length: 40” X Cable Length: 53”,Heavy “Z” bends on both ends, Snap-on handle fi t.

285-553 746-04479 / 946-04479

Drive Control Cable Fits MTD models 11A-A0JC006, 11A-A0JC027, 11A-B0JC006, 11A-B2M7004, 11A-B22Q704 (2011) & 11A-A1JC027 (2011) 21” Push mowers. Fits 12AVB2M7004 (2011) & 12AVB2K9095 (2011) 21” Self-Propelled Lawn Mowers. Fits Yardman models 11A-A18M055, 11A-B2M7001, 11A-A19Q701 & 11A-B29Q701 (2011) Push Mowers. Fits 11A-A19Q701 (2012) Lawn Mower. Fits Yard Machine models 11A-A14E029, 11A-A04D000, 11A-A14R229, 11A-B24A000, 11A-A00J000 & 11A-B04E000 (2011) Push Mowers. Conduit Length: 48”, Total Length: 61”, Heavy “Z” bends on both ends. Snap-on handle fit.

285-555 746-04203946-04203

Drive Control Cable Fits MTD built mowers. MTD models: 12A-469XXX & 12A-559XXX (2006 thru 2009). Troy Bilt models: 12A-446XXX, 12A-449XXX & 12A-466XXX (2006 thru 2009). Yardman models: 12A-445XXX, 12A-449XXX & 12A-569XXX (2006 thru 2008).Conduit Length: 51”,Total Length including spring: 65-1/2”. Snap-on handle fit. (Shorter version of our 285-384).

285-384 746-04204946-04204

Drive Control Cable Fits MTD models: 12A-529RXXX & 12A-529SXXX Lawn Mowers (2008 thru 2009). Fits Troy Bilt models: 12A-264U011 & 12A-264V211 Lawn Mowers (2009). Fits Yardman lawn mowers, models: 12A-263D701 (2006), 12A-265C001 (2007) & 12A-529N062 (2001).. Conduit Length: 55”,Total Length including spring: 69-1/2”. Snap-on handle fit. (Longer version of our 285-555).

287-148 746-0949 / A946-0949 / A

Steering Cable Fits some MTD built 2 stage snow blowers(1998 thru 2012).Conduit Length: 32-3/8”, Overall Length: 34-3/8”;Wire Travel: 1-3/16”.Z-Bend on one end with a barrel on the other.

287-149 746-0956B / 946-0956B946-0956C

Steering Cable Fits some MTD built 2 stagesnow blowers (1998 thru 2012).Conduit Length: 36-1/2”, Overall Length: 39”;Wire Travel: 1-3/8”. Z-Bend on one end with a barrel on the other.

285-406 746-04173 / 746-04173A 746-04173B / 946-04173 946-04173A / 946-04173B

Deck Engagement Cable Fits 13**7** model riders built after 2004. Conduit Length (from mounting face to mounting face) 38-1/8”,Overall Length including Spring: 55-1/2”.Spring Length: 6”

285-440 746-04618 / A946-04618 / A

Deck Engagement Cable For Cub Cadet / MTD / Troy Bilt mowers. Fits Cub Cadet LTX1040, LTX1042, LTX1045, LTX1046, LTX1050 (2009 thru 2013). Fits some MTD 13AX90YT, 13AX915ST, 13AX915T, 13AT915T, 13AV90GS, 13AX915T, 13AP91GS, 13AP91GT, 13AQ91GP (2010 thru 2013).Conduit Length: 40-1/2”, Inner Wire Length: 52-3/4”,Overall Length with Spring: 59-3/4”. Spring Length: 6”.Wire Travel: 8” approximately. Metal Z-Bend on one end.


20-14


C C

285-441 746-04092 / 946-04092

Deck Engagement Cable Fits Cub Cadet / MTD / Troy Bilt mowers.Fits MTD 600 series.Conduit Length: 26”, Inner Wire Length: 43”,Overall Length with Spring: 42-7/8”.Spring Length: 5-7/8”, Wire Travel: 9-3/4” approx.Cast Eyelet on one end and spring on the other.

285-414 746-04353A / 946-04353A

Deck Engagement Cable Fits MTD built models: 13AL60RG048, 13RL60RG044 (LX426), 13RL60RG244 (LX426), 13AX615G055; Troy-Bilt 13AL60RG048, 13RL60RG044 (LX426), 13RL60RG244 (LX426). Lawn Tractor.Conduit Length: 25”, Inner Wire Length: 36”,Wire Travel: 9-7/8” approximately.Overall Length with Spring: 43-1/8”.Spring Length: 5-7/8”.Metal eyelet on one end with spring on the other..

285-410 746-04206 / 746-04206A946-04206 / 946-04206A

Control CableVariable speed control drive cable for MTD.Fits 12**7** model self propelled mowers builtfrom 2008 thru 2010; for 500 series mowers.Overall Length: 79-5/8”, Outer conduit length: 76”.

285-618 746-0557 / 946-0557

Safety Control Cable Fits on MTD Lawn mowers(1991 thru 1993). Found on model numbers 111-XXX thru 112-XXX. Fits walk-behind mowers. Conduit Length: 46” X Inner Wire Length: 51-1/2”, Wire travel: 4-1/2”. Push in clips with heavy “Z” bends on each end.

285-554 746-04238 / 942-04238

Drive Control Cable Fits MTD / Yardman. Fits Yardman models: 31AE5KLG801 (2007) Snowblower.Conduit Length: 50-1/4”, Total Length: 51-3/4”.

285-552 746-04675 / 942-04675

Drive Control Cable Fits MTD / Troy Bilt. Fits Troy Bilt models: 12A-A26M011 (2010) Push Walk-Behind Mower. TB210 (12A-A26M011), 12A-A26M066, TB210 (12A-A26M066), 12A-A26N211, TB210 (12A-A26N211), 12AEA29L011, TB270ES (12AEA29L011), 12AEA29L066, TB270ES (12AEA29L066), 12AEA29M211, TB270ES (12AEA29M211) (2010) Self-Propelled Walk-Behind Mowers. Conduit Length: 64”, Total Length including Spring: 78”. Barrel on one end with spring on the other.

285-383 746-04440946-04440

Deck Engagement Cable Fits Cub Cadet / MTD / Troy Biltmowers. Fits Troy Bilt models: 12AI865Q711, 12AI867Q011, 12AI869F011, 12AI869G211, 12AI839F011, 12AI839G211 (2008 thru 2009) Lawn Mowers. Fits 12AI832Q711, 12AI832Q766, 12AI869F011, 12AI869F066, 12AI869G211 (2010) Self-Propelled Walk-Behind Mowers.Conduit Length: 46”,Overall Length with Spring: 59-1/2”.

285-419 746-0711B946-0711B

Adjustment Control Cable For MTD mowers. Fits MTD models: 12A-989QXXX (2007) Walk-Behind Mowers. 12A-98K9095 (2011) 21” Self-Propelled Lawn Mowers & 12A-997A795 (2005) Walk-Behind Mowers. Fits Troy Bilt models: 12A-998Q766 (2004) Lawn Mowers. Fits Yardman models:12A-989Q701 (2006) & 12A-998Q701 (2004) Lawn Mowers. Conduit Length: 51”, Total Length: 55”. Barrel on one end with a Z-bend on the other.


20-15


C C

287-142 746-04640946-04640

Auger Cable For some MTD built 2 stage snowblowers. Fits models: 31A-32AD706 (2010), 31A-32AD706 (2011) Two-Stage Compact Snowblowers. Fits Yardman models: 31A-32AD700 (2010), 31A-32AD700 (2011), 31A-32AD752 (2010), 31A-32AD752 (2011) Walk Behind Snowblowers. Conduit Length: 23”,Overall Length with Spring: 47-1/2”; Wire Travel: 21”. Z-Bend on one end with spring on the other.

287-140 746-04007946-04007

Auger Clutch Cable.Fits many MTD built /Cub Cadet 31A series snowblowers (2004 thru 2010).Conduit Length (Includingthreaded end): 33-1/2”,Overall Length with Spring:50-1/4”; Wire Travel: 13”.Z-Bend on one end with spring on the other.

285-600 946-0898746-0898A746-0898

Clutch Drive CableFits 600 model series snowblowers built 1995 thru 2002 & 700 model series built in 2003. Overall Length: 43″

285-599 746-0897 / 746-0897A 746-0778 / 946-0897946-0778 / 946-0897A

Auger Clutch CableFits 400 thru 600 series MTD snow blowers built 1992 thru 2004. Overall Length with spring: 44-3/4”. (Note: Threaded rod NOT included, sold separately - see our part# 285-590).

285-590 746-0778

Threaded Control Cable EndUsed on many MTD, Murray and Noma / Canadiana snowblowers.Measures: 4-3/8″ Overall Length.(Used on our 285-600 and 285-599 control cables)

287-134 746-04236946-04236

Auger Clutch Cable Fits many MTD built2 stage snow blowers (2005 thru 2012).Conduit Length: 22-1/2”, Overall Length with Spring: 47-1/2”; Wire Travel: 21-3/8”. Z-Bend on on end with spring on the other.

287-143 746-04642 / A946-04642 / A

Traction Drive Clutch Control Cable Fits some MTD built 2 stage snow blowers (2009 thru 2012). Conduit Length: 35-1/2”, Overall Length with Spring: 51-1/4”; Wire Travel: 13”. Z-Bend on on end with spring on the other.

287-136 746-04256946-04256

Traction Drive Cable Fits many MTD built 2 stage snow blowers (2005 thru 2008). Conduit Length: 34-3/4”, Overall Lengthwith Spring: 52”; Wire Travel: 13-3/4”.Z-Bend on one end with spring on the other.

287-135 746-04237946-04237

Clutch Control Cable Fits many MTD built single stage snow blowers (2005 thru 2010). Conduit Length: 26”, Overall Length with Spring: 41-3/4”; Wire Travel: 13-3/4”.Z-Bend on on end with spring on the other.


20-16


C C


285-556 746-04728 / 946-04728

Drive Control Cable Fits many newer MTD models: 12A-AXXXXXX, 12A-BXXXXXX, 12A-EBXXXXXX (2011 thru 2015). Conduit Length: 64”, Total Length: 78”. Spring on one end, barrel fitting on the other. Snap-on handle fit.

287-141 746-04008946-04008

Traction Drive Cable.Fits many MTD built /Cub Cadet 31A series snowblowers (2004 thru 2010).Conduit Length: 34-3/4”,Overall Length with Spring: 51-1/4”; Wire Travel:14”.Z-Bend on one end with spring on the other.

285-586 746-0951946-0951

Auger Idler Control Cable For MTD snowblowers.Found on 800 & 900 series (large frame) snowblowers; 1998 & newer.Measures: 16-1/4″ Overall Length, Cast Z-Bends on both ends.

285-587 746-04227A

Speed Selector Control CableFor MTD snowblowers.Found on MTD Pro seriesmodel 31AE6BHE718 (2005 and newer).Measures: 22-1/8″ Overall Length, Cast Z-Bends on one end and a cast barrel end on the other.

285-584 746-04396 / A946-04396 / A

Speed Selector Control Cable For MTD snowblowers.Found on MTD .Measures: 22-1/8″ Overall Length,Cast Z-Bend on one end and a casthammer head end on the other.

285-588 746-04228 / A946-04228 / A

Speed Selector Control Cable For MTD snowblowers. Found on MTD / White models: 31AE6BHE718, 31AE6GLF00, 09, 19, 26, 31AE6GLF795, 31AE6L04766, 31AH6BHE790, 31AS6BEE700, 31AS6BEE731, 31AS6FEF700. Measures: 24-1/8″ Overall Length, Cast Z-Bend on one end and a cast barrel end on the other.

285-602 746-0600946-0600

Clutch Cable Used on push mowers.Overall Length: 59″Conduit Length: 47-1/2 X Cable Length: 54-1/2″Wire travel: 6-1/2″, Spring Length: 4-1/2″

285-403 746-0629 / 946-0629

Clutch CableUsed all self propelled walk behind mowers with cog front wheels.Conduit Length: 37″, Total Length: 48″

285-405 746-0910 / A

Clutch CableAuger Drive & Traction Cableon many MTD snowblowerssince 1995. Fits 180 seriessingle stage snowblowers.Conduit Length: 35-3/8, Total Length: 41-1/2″

285-570 746-05067 / 946-05067

Control CableWheel Drive / Drive Clutch Cable for MTD / TROY BILT built snowblowers (2013 thru 2016). Fits MTD models: 12ABD29V897 (2015), 12ACD29W897 SP21SE (2016), SP21S (12ABD29V897) (2016). Overall Length including spring: 45-1/4”, Overall Spring Length: 3-1/4”.

285-594 746-04229 / A946-04229 / A

Wheel Drive / Clutch Cable For MTD built snowblowers. Overall Length with spring: 45-3/8″, Overall Spring Length: 2-1/8″.

285-596 746-04230 / A946-04230 / A

Wheel Drive / Clutch Cable For MTD built snowblowers. Fits models: 31AH5ZLH704,31AM63LF704,31AH6ZLG704 (2008),31AE5KLF795, 31AE6GFF795, 31AE5MLH795 (2007),31AE5KLF796 (2006), 31AE6BHE718 (2005 on).Overall Length including spring: 48″, Overall Spring Length: 2-1/8″.


20-17


C C

285-413 746-0713 / A

Control Cable For 21″ walk behind mowers.Conduit Length: 53″, Total Length: 57″

290-840 746-0801946-0802A

Throttle Control Fits MTD models 019, 070, 072,080, 082, 200, 220, 222, 280 & 282.

Conduit length (including spring): 51-3/4″Inner wire length: 52″, Z-bend on end,Wire travel: 1-11/32″

290-038 746-1084

Throttle ControlFits 600 series lawn tractors with Briggs and StrattonOHV engines.Conduit Length: 25″, Overall Length: 27″

290-042 746-1100

Throttle Control Fits 800 series lawn tractors with Kohler twin cylinder OHV engines.Conduit Length: 38″, Overall Length: 40-1/2″

290-025 746-547 746-0390 746-0390A

Throttle control For MTD built snowblowers. Found on MTD, Yardman, Columbia models 250, 280, 281, 450, 510, 511, 520, 580, 761, 766, 821, 840, 961. Inner Wire Length: 32-1/2″, Conduit Length: 30″, Wire Travel: 1-1/2″.

290-048 746-04066Throttle control For Cub Cadet models:RZT 50, RZT 54,GT1222 mowers. Conduit Length: 34-3/8”, Inner Wire Length: 37”, Wire Travel: 1-5/8”, Inner wire diameter: .062”.

290-683 746-0616 / 746-0616A

Choke ControlFits on lawn tractors. Conduit Length: 18-3/4″, Overall Length: 26″, Inner wire length: 24-1/4″, Wire travel: 1-1/2″

290-519 746-3021

Choke Control Fits models 662-672 & 678. Conduit Length: 29″, Inner wire length: 32″, Wire travel: 1-1/2″.

290-682 746-0614 / 746-0614A

Choke ControlFits on mid-sized rear engine riders. Conduit Length: 34″, Overall Length: 41″Inner wire length: 39-1/4″, Wire travel: 1-1/2″

290-681 746-0613 / 746-0613A

Choke ControlFits on lawn tractors.Conduit Length: 42″, Overall Length: 49-1/2″. Inner wire length: 48″, Wire travel: 2-1/4″

290-041 746-1088

Choke Control Fits on lawn tractors.Conduit Length: 23″, Overall Length: 24″

290-047 746-04121946-04121

Choke Control For Cub Cadet / MTD applications. Fits Cub Cadet models: LT1018, LT1022, LT1040, LT1042, LT1045,LT1046, and LT 1050. Overall Conduit Length: 24” X Inner Wire Length: 25-1/2”, Wire Travel: 1-1/2”, Inner wire Diameter: .062”.

290-039 746-1085A 946-1085A

Choke control cableFits models: 1170, 1180, 1212, 1800, LT1042, LT1045, LT1046 and LT1050. Found on many MTD built lawn tractors, 42” cut (2000 & newer). Conduit Length: 37” X Inner Wire Length: 39”, Wire Travel: 1-3/4”.

290-044 746-04120

Choke control For Cub Cadet / MTD applications. Fits Cub Cadet models: i1046, i1050, GT1222, GT1554, SLT1550, SLT1554, LT1018, LT1022, LT1024, LT1042, LT1045, LT1046, LT1050 mowers. Overall Conduit Length: 40-1/2” X Inner Wire Length: 42-1/2”, Wire Travel: 2”, Inner wire Diameter: .062”.


20-18


C C

290-680 746-04364946-04364

Choke Control Fits on MTD 700 series.Conduit Length: 25-1/2” XInner wire length: 28-1/2”, Wire travel: 1-5/8”.

290-040 746-04556946-04556

Choke / Throttle Control Fits some MTD 13AR91PPand 13AR91PS (2010).Fits some Cub Cadet GT, GTX, LGT, LGTX, LTX, SLTX, (2009 thru 2013). Overall Length: 39-5/8” X Conduit Length: 38”.

290-045 746-04214 / 946-04214

Choke Control Found on models ZRT50 and ZRT54 zero turn mowers. Overall Conduit Length: 61-3/8” X Inner Wire Length: 63-1/4”, Wire Travel: 2”, Inner wire Diameter: .062”.

285-608 746-0694Lock-out Cable /Clutch CableFits MTD 800 to 996 series. 1989 & later; also used on small frame Noma snowblowers as a clutch cable; models: 523, 825. Overall Length: 28-1/4″, Cable Length: 23-3/4″

285-591 746-0716Lock-out Cable / Auger Clutch Cable

For MTD built snowblowers. Overall Length: 23-1/4″. Cast Z-Bend on one end with a 1/4″ diameter threaded end on the other.

285-592 746-0952 946-0952

Lock-out Cable / Auger Clutch Cable

for MTD built snowblowers. Fits MTD 800 and 900 series, large frame snowblower. (1998 and newer). Overall Length: 26-1/2″. Cast Z-Bend on one end with a 1/4″ diameter threaded end on the other.

285-593 746-04086 946-04086

Lock-out Cable / Auger Clutch Cable

For MTD built snowblowers. Fits MTD 500 and 600 series snowblower. Overall Length: 42-3/4″, Coil Spring Length: 2-1/2″.

285-598 746-0896946-0896

Chute Control CableFor MTD Snowblowers.Fits newer models builtsince 1993.Conduit Length: 47″,Overall Length: 54-1/4″;Wire Travel: 6-3/4″

287-133 746-0901 / 946-0901

Chute Defl ector control cableFits many MTD built / Cub Cadet31A series snow blowers,31A series snow blowers,WITH fl oating cable clip.(1998 thru 2005).Conduit Length Includingthreaded end): 46-5/8”,Overall Length: 54-3/8”;Wire Travel: 7”.

287-146 746-0902 / 946-0902

Chute Control CableFits some MTD built 2 stage snow blowers(1997 thru 2011). Conduit Length: 66”, Overall Length: 73”; Wire Travel: 6-5/8”.Threaded adjustment on one end with barrels on both ends.

287-147 746-0903946-0903

Chute Control Cable Fits some MTD built 2 stage snow blowers (1997 thru 2012). Fits COLUMBIA: 2008-2013 snowblowers; Fits CUB CADET: SW10528L snowblowers; Fits WHITE OUTDOOR: 1997-2002 snowblowers. Conduit Length: 67”, Overall Length: 74”; Wire Travel: 6-3/8”. Threaded adjustment on one end with barrels on both ends.

287-138 746-04477946-04477

Chute 4-way Control Cable Fits some MTD built 2 stage snow blowers with joystick chute control (2009 thru 2012). Fits CRAFTSMAN: 2010-2014 snowblowers; Fits CUB CADET: 2010-2013 snowblowers; Fits MTD Gold: 2011 and 2012 snowblowers; Fits YARDMAN: 2011 and 2012 snowblowers. Conduit Length: 54”, Overall Length: 62”; Wire Travel: 6-5/8”. Barrel on both ends. Includes plastic conduit clip as shown.


20-19


C C

287-139 746-04528A / B946-04528A / B

Chute 4-way Control Cable Fits some MTD built 2 stage snow blowers with joystick chute control (2009 thru 2012). Fits CRAFTSMAN: 2010-2014 snowblowers; Fits CUB CADET: 2013-2015 snowblowers; Fits MTD Gold: 2013 snowblowers; Fits TROY BILT: Storm 3090, 2840, 2690, 2690XP, Vortex 2890, 2690XP and 3090XP snowblowers; Fits YARDMAN: 2013 snowblowers. Conduit Length: 55”, Overall Length: 62-1/4”; Wire Travel: 5-3/4”. Barrel on both ends.

287-145 746-04619 / A946-04619 / A / B

Chute control cable.Fits MTD built snow blowers. Fits Craftsman: 2013 snowblowers; Fits CUB CADET: 2X and 3X snowblowers; Fits MTD Gold: 2010-2013 snowblowers; Fits YARDMAN: 2010-2013 snowblowers. Conduit Length: 45-3/4”, Overall Length: 48”; Barrel on one end, ball on other.

MURRAY / NOMA290-049 22058

52087Throttle Control Fits Murray, Noma and others.Conduit length: 44″,Inner wire length: 47″This is a universal positive action plastic control head, sliding lever type.

290-106 42096 / 4277642877 / 4287842879 / 4294953415 / 57353

Throttle Control Fits Murray and many others. Conduit length: 60″, Inner wire length: 67″All plastic control with galvanized inner wire. Wire travel: 1-3/8″Used on MTD, AYP, Air Cap, Noma and others.

290-114 21540PA23332PA

Throttle Control Positive action control.Conduit length: 14″, Inner wire length: 17-5/8″. Conduit size: 3/16″, Inner wire size: .058″, Wire travel: 1-3/8″(While Quantities Last)

290-122 21222PA

Throttle ControlPositive action control. Conduit length: 60”, Inner wire length: 64-1/2”,Conduit size: 3/16”, Inner wire size: .058”, Wire travel: 1-3/8”

290-175 71157 / 71180420005

Throttle Control Fits most Murray walk behinds. Converts easily from positive to negative action.Conduit length: 50″, Inner wire length: 55″Plastic Conduit size: 3/16″, Wire travel: 1-1/2″

290-961 MurrayThrottle ControlHeavy duty throttle control fi tsMurray walk behind mowers. Plastic conduit converts from positive to negative action.Conduit length: 70″, Inner wire length: 76″Plastic Conduit size: 3/16″, Wire travel: 1-1/2″(Note: light duty version us our 290-002 found on page 20-03.)

290-262 52061 / 52769Throttle ControlFor walk behind steel deckmowers with Briggs and Stratton engines.Conduit length: 48-3/4″, Inner wire length: 52-3/16″, Wire travel: 1-1/8″Conduit size: 3/16″

290-112 50877 / 51223 / 53943 780232 / 780232MA

Throttle ControlFound on Ariens, Murray / Noma snowblowers. Conduit length: 30-1/4″, Inner wire length: 33″, Conduit size: 3/16″, Inner wire size: .055″, Wire travel: 1-3/4″.

295-506 MurrayMounting AdapterFor use with our Murraythrottle controls # 290-175, 290-961 and 290-002.(Priced Individually)

290-685 740194 / 7701016Throttle Control Fits high wheel trimmer.Overall Length: 49″,Conduit Length: 44″


MTD / CUB CADET cont. MURRAY / NOMA cont.

20-20


C C

290-684 91989

Throttle ControlFor panel mounting.

Overall length: 26-1/2″Conduit length: 21″, Inner wire length: 23-1/2;Wire travel: 7/8″

290-000 Tecumseh# 35438

Choke Knob - Snowblower Found on various CRAFTSMAN,CUB CADET, LAWN BOY, MTD, TOROSnowblowers equipped with TECUMSEHengines.Size: 1-1/4” OD X 1-1/4” HT. (Red Plastic).

285-608 1579 / 1579MA

Lockout Cable / Clutch Cable

Fits on small frame Noma snowblowers models: 523 and 825.Overall Length: 28-1/4″, Cable Length: 23-3/4″

285-595 1580

Clutch Drive Cable

For Murray / Noma snowblower. Fits Small Frame snowblower models: 523, 825 etc.Overall Length: 32-5/8″, Cable Length: 27-5/8″.

285-710 1501124 1501124MA 762259MA 1501124MA 762259MA

Auger Clutch CableFound on Murray / Noma snowblowers. Overall Length: 32-3/4″, Cable Length: 31″.

285-709 1501123 1501123MA

Clutch CableFound on Murray / Noma snowblowers. Overall Length: 30-1/2″, Cable Length: 29-1/2″

285-708 313449 / MA1501122 / MA

Control CableLower Drive CableFound on Murray / Noma snowblowers. Overall Length: 12-3/4″, Cable Length: 12″

285-597 4052 / 4052MA

Chute Control CableFor Murray / Noma snowblowers. Measures: 59-3/8″ Overall Length, Conduit Length with both threaded end: 52″, Wire Travel: 5-1/2″

287-001 761131 761131MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 69-1/2″ Overall Length, Conduit Length: 62″, Wire Travel: 5-1/4″, Eyelet hole ID: 5/16″

287-002 761775 761775MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 63-3/4″ Overall Length, Conduit Length: 57-1/2″, Wire Travel: 3-1/4″, Eyelet hole ID: 5/16″ with a Cast Z-Bend on the other.

285-712 339496 339496MA

Chute Control Cable For Murray / Noma snowblowers. Measures: 50″ Overall Length, Conduit Length: 43″, Wire Travel: 6″

290-615 776113

Choke Control Black plastic conduit with reinforced wire wrapped end.Overall Length: 51-3/4″

290-043 175441 X 428

Choke Control

Fits on many lawn & garden tractors.Conduit length: 42″, Overall Length: 44″

MURRAY / NOMA cont. MURRAY / NOMA cont.

20-21


C C

285-707 579856 579856MA MC579856

Traction CableFound on Murray / Noma snowblowers. Overall Length: 6-5/8″, Cable Length: 5-1/8″.

285-711 1501452 501452MA

Drive CableFound on Murray/ Noma snowblowers. Overall Length: 35-3/4″,Cable Length: 34″.

285-589 1502113MA

Drive Control CableFor Murray / Briggs and Stratton snowblowers.FR-DR P7 5-13B. Measures: 31-1/4″ Overall Length, Cast Z-Bends on both ends.

285-606 42569Engine Stop CablePlastic covered conduit with brackets.Conduit Length: 44-1/2″ X Cable Length: 52-1/2″,Wire travel: 7-1/2″, Heavy ″Z″ bend on each end.

285-605 4374942363

Engine Stop CableFits push mower models22651X-8A, 5A, 12A, 15A and 22651A.Conduit Length: 45-1/2″, Cable Length: 54-1/2″,Wire travel: 7-3/8″, Heavy ″Z″ bend on each end.

285-630 1101360

Engine Stop CableFits 20″ walk-behind pushmowers with rear bagger made from 2001 thru 2003.

Conduit length: 42-1/2″, Inner wire length: 48-3/4″with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on other end.

285-633 672840

Engine Stop CableFits walk-behind mowers made from 2000 thru 2003.

Conduit length: 42-1/2″, Inner wire length: 50″with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on other end.

285-625 1101093Engine Stop CableFits 20″ walk-behind mowersmade from 2000 thru 2003.Conduit length: 44″,Inner wire length: 50″with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on other end.

285-626 1101181Engine Stop CableFits 20″ and 22″ walk-behindmowers made from 2001 thru 2002. Conduit length: 45-1/4″,Inner wire length: 52-1/4″with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on other end.

285-632 672835Engine Stop CableFits walk-behind mowers with Tecumseh engines made from 2000 thru 2003.Conduit length: 52-1/4″,Inner wire length: 59-1/4″ with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on other end.

285-616 1102094MA

Engine Stop CableConduit length: 43″,Inner wire length: 49-3/8″

with 3/16″ Z-bend on both ends. Wire Travel: 6″

285-631 1101366Engine Stop CableFits 22″ walk-behind mowers madefrom 2001 thru 2003 with rear bagger. Conduit length: 52″, Inner wire length: 59-1/4″with a 3/16″ ″Z″ bend on each end.

285-615 43361

Engine Stop CableFits model TVS90 onleft hand side of 20″and 22″ walk behindswith Tecumseh engines.Conduit Length: 36-7/8″, Inner wire length: 46″with 3/16″ ″Z″ bend on each end. (While Quantities Last)

285-697 43828Engine Stop CableFits 22″ walk-behind mowersConduit length: 40″,Inner wire length: 48-1/2″with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on other end.

285-700 43881Safety Control CableConduit length: 46”, Inner wire length: 54-3/4”with 3/16” Z-bend on one end, 1/4” (T) on other end.

MURRAY / NOMA cont. MURRAY / NOMA cont.

20-22


C C

MURRAY / NOMA cont.

285-614 43830Engine Stop CableFits Murray.Conduit Length: 49″ XInner Wire Length: 57-1/2″with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on the other.

285-607 43827Engine Stop CableFits walk-behind mowers.Conduit length: 49-1/2″,Inner wire length: 57-7/8″ with 3/16″ ″Z″ bend on one end, 1/4″ ″T″ on other end.

285-634 740193

Drive Control & Cable Fits walk-behind string trimmers. Flexible inner wire with spring on end, 90 degree bend on spring. Conduit length: 55-1/4”, Overall Length with Spring: 58-3/4”.

285-629 1101344

Drive Control & CableFits self-propelled walk-behind mowers. Flexible inner wire with spring on end, U-bend on spring. Conduit length: 59”, Overall Length w/ Spring: 62-3/8”.

285-726 21913

Lift CableFits 36″ cut, 2 blade models.Length: 21-1/8″, ball one end with a 5/16″-18 threadedrod on the other. Thread Length: 1-3/8″

285-817 24470Lift CableFits 38″ and 39″ cut models.Length: 28-1/2″ with a barrel one end and a 5/16″-18threaded end on the other.Thread Length: 1-3/8″

285-148 39299Lift CableMeasures: 20″ Long X 1/4″-20 threadedend on the other.

285-412 46512Lift CableFits 36″ and 42″ decks.Measures: 17-1/2″ Long X 1/4″-20 threaded end on the other.



285-494 5593853713

Lift Cable Measures: 23″ Long X 1/4″-20 threaded end.Thread Length: 2-3/8″

SCAG290-125 48780

Choke Control Push-pull designConduit length: 55″, Inner wire length: 58″,Wire travel: 2″,

285-416 48828

Steering CableFits 61″ and 72″cut riders.Models ST17KA and 19KH.5/16″ barrel on each end Length: 67-5/8″, Thread end: 3/8-24″Cable diameter: 130″

SNAPPER290-254 1-8237

Throttle ControlUsed on Riders with Tecumseh engines. Positive action with locking detents, side mount.Conduit length: 13-1/2″,Inner wire length: 16-1/2″

290-262 2-34491-81861-8515

Throttle ControlFor V series cast models withBriggs and Stratton engines. Wraps around back of engine. Positive action, side mount. Conduit length: 48-3/4″,Inner wire length: 52-3/16″, Conduit size: 3/16″, Wire travel: 1-1/8″

290-411 1-1991

Throttle Control Used on Riders with 8 Hp Briggs and Stratton engines.Front mounting. For series 1 thru 3 and 26″, 30″ rear engine Riders. Conduit length: 50″,Inner wire length: 52-1/4″.



20-23

MURRAY / NOMA cont.


C C

290-068 1-88891-83531-8486

Throttle Control Used on Riders with Briggs and Stratton engines.Negative action control, side mounted.Conduit length: 12″, Inner wire length: 14-1/2″

285-026 1-5476

Brake Cable Fits rear engine riders with 28″ & 30″ decks and one brake/clutch pedal riders.1/2″ eyelet on one end, 1/4″ barrel on the other end. 3 adjustment spacers, for series 6.Length: 46-3/4″

285-027 1-5477

Brake CableFits rear engine riders with 33″ & 41″ decks and one brake / clutch pedal riders.1/2″ eyelet on one end, 1/4″ barrel on the other end. 3 adjustment spacers, for series 6. Length: 50″

290-240 1-9254

Throttle ControlFor 21″ aluminum and Steeldeck series 7, 20″ series 0 with Briggs and Robin engines. Fits 1990 & 1991 V-21 Snapper with 5 Hp Quantum engines. Heavy gauge steel construction / detents / choke position / polyethylene covered.Conduit length: 45″, Inner wire length: 47

290-188 1-8188

Throttle ControlFor 21″ commercial walk behind mowers, 1987 and earlier. Equipped with Briggs and Stratton 5 Hp engines.Heavy duty 7/32″ outer conduit with .072″ galvanized innerwire. Position action control.Conduit length: 49″, Inner wire length: 51-1/8, Wire travel: 1-1/2″

290-264 1-91756-091670191757019175YP

Throttle ControlFits Briggs & Stratton 3-1/2 HP,21” Self-Propelled Model T21357B. Heavy duty 7/32” coated outer conduit with .072” galvanized innerwire. Conduit length: 45-1/2”,Inner wire length: 47-3/4”, Wire travel: 1-1/2”

285-219 329-496-185-00

Drive Control CableFits Stiga NV walk-behind mowers.Conduit: 48-1/4″, Length Extension: 8-27/32″

285-220 329-496-187-00

Drive Control CableFits Stiga NV walk-behind mowers.Conduit: 52-1/4″, Length Extension: 11″

STIHL - See TRIMMER PARTS - OEMsection 50

TORO / WHEEL HORSE290-802 109-9147

Choke Control / Choke CableFor models:TITAN Z4800 andZ5200 Zero Turn mowers.Conduit length: 53-5/16”,Inner Wire Length: 55-5/8”.

295-070 70-1061

Throttle CableFits old style 21″ Toro rear baggers. Conduit: 49-25/32″, Inner Wire: 52-9/32″, Wire Travel: 2-27/32″

290-056 12-9470

Throttle Control Two hole mounting for sideor panel applications.

Conduit length: 48″,Inner wire length: 51-1/2″

290-098 Toro / Wheel

Throttle ControlProvides direct linear motion on panel or on 7/8″ diameter handlebar.

Conduit length: 46-1/2″, Inner wire length: 48″




20-24

SNAPPER continued STIGA (Dynamark / Noma)


C C

290-130 8105102119

Throttle Control Locking push / pull cableMarked ″T″ for throttle.Conduit length: 41″, Inner wire length: 43″,Wire travel: 2″

290-148 8104 / 102118

Throttle Control

This heavy duty non rotational locking control has a variety of industrial uses.

By turning T-knob 1/4 turn, control locks securely against spring tension and vibration. Installation hole: 9/16”. Max push load: 20 lbs, Max pull load: 50 lbs.Conduit length: 92-1/2”, Inner wire length: 104”, Inner wire diameter: .080”, Conduit size: 1/4”

285-960 105-1844

Traction Control CableFits Toro 22″ Recycler self-propelled mowersbuilt 2002 thru 2008with Personal Pace.

Conduit Length: 36”, Overall Length including spring: 47”; Spring Length: 2-1/2”; Wire Travel: 7-1/4”. Heavy Z-Bend on one end with spring on the other.

285-961 105-1845

Traction Control CableFits Toro 22″ Recycler self-propelled mowersbuilt 2002 thru 2009without Personal Pace.

Conduit Length: 54-1/2”, Overall Length including spring: 68-1/2”; Spring Length: 2-1/2”; Wire Travel: 10”. Heavy Z-Bend on one end with spring on the other.

285-962 106-8300

Traction Control CableFits Toro 21” SuperRecycler self-propelledmowers built 2003 thru 2005with Personal Pace.

Conduit Length: 32-1/4” X Total Length: 47-1/4”.

285-969 112-8817

Traction Control Cable Fits 20” Recycler 20314,20316, 29639, 29641, 29642and 29643.

Conduit length: 34″, Overall Length includingSpring: 47-1/2”Spring Length: 2-1/2”, Wire Travel: 10-1/4”Heavy Z-Bend on one end with spring on the other.

285-414 112-6137

Deck Engagement Cable Fits MTD built TORO models: 13AL60RG048, 13RL60RG044 (LX426), 13RL60RG244 (LX426), 13AX615G055; Troy-Bilt 13AL60RG048, 13RL60RG044 (LX426), 13RL60RG244 (LX426). Lawn Tractor.

Conduit Length: 25”, Inner Wire Length: 36”,Wire Travel: 9-7/8” approximately.Overall Length with Spring: 43-1/8”.Spring Length: 5-7/8”.Metal eyelet on one end with spring on the other..

285-441 112-0504

Deck Engagement Cable Fits Toro mowers, built by MTD.Fits MTD 600 series.

Conduit Length: 26”, Inner Wire Length: 43”,Overall Length with Spring: 42-7/8”.Spring Length: 5-7/8”, Wire Travel: 9-3/4” approx.Cast Eyelet on one end and spring on the other.

285-964 119-2379

Drive Cable / Traction Control CableFits Toro Personal Pace mowers.

Conduit Length: 53” XTotal Length with Spring: 64-5/8”. Wire Travel: 9”Heavy ″Z-Bend on one end with spring on the other.

TORO / WHEEL HORSE

20-25

TORO / WHEEL HORSE


C C

285-490 84-9120

Drive Cable / Traction Control CableFor Toro Commercial PRO LINE Mowers.

Conduit Length: 31-1/4″ X Inner Wire Length: 37-1/2″,Wire Travel: 6-1/4″;Heavy ″Rectangular″ eyelets on both ends.

285-492 70-1080

Drive Cable / Traction Control CableFits Toro self propelled commercial PRO-LINE mowers. Model: 22621C (1989 and newer).

Conduit Length: 35-1/4″, Inner Wire Length: 45-1/4″, Wire Travel: 10″.

285-493 74-1791

Drive Cable / Traction Control CableFor Toro Commercial PRO LINE Mowers.

Conduit Length: 34-5/8″ X Inner Wire Length: 43-1/2″, Wire Travel: 8-7/8″Heavy ″Rectangular″ eyelets on both ends.

285-491 99-6291

Blade Brake Cable. Fits Commercial 21″ Pro Line mowers.

Conduit Length: 62″, Inner Wire Length: 68-3/8″, Wire Travel: 8-7/8″

285-488 103-2683

Blade Brake CableFits Toro self propelled mowers. Found on Toro Consumer 22167, 21” Heavy Duty Recycler / Rear Bagger lawnmower, 2007 (Exmark SN 370,000 thru 439999 (Honda powered and SN 440,000 thru 509,999 Kawasaki powered) and 2006 (Toro SN 270000001 thru 270999999).

Conduit Length: 60-5/8”, Inner Wire Length: 66”, Wire Travel: 4-3/8”. Overall Length: 68”.Metal Z-Bend on one endwith a rectangular female on the other.

285-963 115-8439

Blade Brake Cable Fits Toro Personal Pace Recycler Lawnmowers.Fits Toro models: 20333 (2009 and newer);20333C (2010 thru 2012); 20373 (2012 thru 2013);20376 (2013); and 20958 (2010 and newer).

Conduit Length: 53-3/8”, Inner Wire Overall Length including eyelet and Spring: 62-1/2”,Wire Travel: 4-3/4” Approximately.1/4” Eyelet on one end with Spring on the other.Includes rubber grommet on spring end.

285-966 104-8677

Blade Brake CableFits LAWN BOY & TORO 22” Recycler.

Fits models: 20001, 20003, 20005, 20007, 20008, 20009, 20012, 20016, 20019, 20069, 20071, 20072, 20094, 20636, 20990 and 20995. Conduit Length: 49” X Cable Length: 58-1/2”, Heavy “Z” bends on both ends.

285-965 104-8676

Blade Brake Cable Fits Toro 22” Recycler.

Cable Length: 58”, Conduit Length: 53-1/2”.

Fits models 20013, 20014, 20017, 20018, 20031, 20041, 20047, 20049, 20051, 20066, 20067, 20068, 20070, 20073, 20073A, 20074, 20074A, 20075, 20078, 20079, 20089, 20096, 20098, 20112, 20113, 20655 and 20656.

Z-Bends on both ends.

20-26

TORO / WHEEL HORSE TORO / WHEEL HORSE

ccontrols - throttle & accessoriesontrols - throttle

Documents