ccnp switch lab 7-1 results..telephony support

4
LAB 7-1:: CONFIGURING SWITCHES F OR IP TELEPHONY SUPPORT DLS1#sh interfaces tru Port Mode Encapsulation Status Native vlan Po1 on 802.1q trunking 1 Po2 on 802.1q trunking 1 Po3 on 802.1q trunking 1 Port Vlans allowed on trunk Po1 1-4094 Po2 1-4094 Po3 1-4094 Port Vlans allowed and active in management domain Po1 1,10,20,30 Po2 1,10,20,30 Po3 1,10,20,30 Port Vlans in spanning tree forwarding state and not pruned Po1 1,10,20,30 Po2 1,10,20,30 Po3 1,10,20,30 DLS1#sh eth su Flags: D - down P - bundled in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 U - in use f - failed to allocate aggregator M - not in use, minimum links not met u - unsuitable for bundling w - waiting to be aggregated d - default port Number of channel-groups in use: 3 Number of aggregators: 3

Upload: bijay-banstola

Post on 03-Jun-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ccnp switch LAB 7-1 Results..Telephony Support

8/12/2019 ccnp switch LAB 7-1 Results..Telephony Support

http://slidepdf.com/reader/full/ccnp-switch-lab-7-1-resultstelephony-support 1/4

LAB 7-1:: CONFIGURING SWITCHES FOR IP TELEPHONY SUPPORT

DLS1#sh interfaces tru

Port Mode Encapsulation Status Native vlan

Po1 on 802.1q trunking 1Po2 on 802.1q trunking 1

Po3 on 802.1q trunking 1

Port Vlans allowed on trunk

Po1 1-4094

Po2 1-4094

Po3 1-4094

Port Vlans allowed and active in management domain

Po1 1,10,20,30

Po2 1,10,20,30

Po3 1,10,20,30

Port Vlans in spanning tree forwarding state and not pruned

Po1 1,10,20,30

Po2 1,10,20,30

Po3 1,10,20,30

DLS1#sh eth su

Flags: D - down P - bundled in port-channel

I - stand-alone s - suspended

H - Hot-standby (LACP only)

R - Layer3 S - Layer2

U - in use f - failed to allocate aggregator

M - not in use, minimum links not met

u - unsuitable for bundling

w - waiting to be aggregated

d - default port

Number of channel-groups in use: 3

Number of aggregators: 3

Page 2: ccnp switch LAB 7-1 Results..Telephony Support

8/12/2019 ccnp switch LAB 7-1 Results..Telephony Support

http://slidepdf.com/reader/full/ccnp-switch-lab-7-1-resultstelephony-support 2/4

Group Port-channel Protocol Ports

------+-------------+-----------+-----------------------------------------------

1 Po1(SU) LACP Fa0/11(P) Fa0/12(P)

2 Po2(SU) LACP Fa0/9(P) Fa0/10(P)

3 Po3(SU) LACP Fa0/7(P) Fa0/8(P)

DLS1#sh vtp status

VTP Version capable : 1 to 3

VTP version running : 2

VTP Domain Name : SWPOD

VTP Pruning Mode : Disabled

VTP Traps Generation : Disabled

Device ID : 0021.a15c.1880

Configuration last modified by 172.16.1.3 at 3-1-93 00:32:45

Local updater ID is 172.16.1.3 on interface Vl1 (lowest numbered VLAN interface found)

Feature VLAN:

--------------

VTP Operating Mode : Server

Maximum VLANs supported locally : 1005

Number of existing VLANs : 8

Configuration Revision : 4

MD5 digest : 0xBB 0xB3 0xBA 0x4C 0xC2 0xDB 0xEE 0x65

0x20 0x67 0xFA 0x04 0x53 0x0C 0x55 0x53

DLS1#sh standby br

P indicates configured to preempt.

|

Interface Grp Pri P State Active Standby Virtual IP

Vl1 1 150 P Active local 172.16.1.4 172.16.1.1

Vl10 1 150 P Active local 172.16.10.4 172.16.10.1

Vl20 1 100 P Standby 172.16.20.4 local 172.16.20.1

Vl30 1 100 P Standby 172.16.30.4 local 172.16.30.1

DLS1#sh ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2

Page 3: ccnp switch LAB 7-1 Results..Telephony Support

8/12/2019 ccnp switch LAB 7-1 Results..Telephony Support

http://slidepdf.com/reader/full/ccnp-switch-lab-7-1-resultstelephony-support 3/4

  i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

ia - IS-IS inter area, * - candidate default, U - per-user static route

o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

172.16.0.0/24 is subnetted, 4 subnets

C 172.16.30.0 is directly connected, Vlan30

C 172.16.20.0 is directly connected, Vlan20

C 172.16.10.0 is directly connected, Vlan10

C 172.16.1.0 is directly connected, Vlan1

DLS1#show auto qos interface

FastEthernet0/7

auto qos voip trust

FastEthernet0/8

auto qos voip trust

FastEthernet0/9

auto qos voip trust

FastEthernet0/10

auto qos voip trust

FastEthernet0/11auto qos voip trust

FastEthernet0/12

auto qos voip trust

DLS1#show mls qos interface fastEthernet 0/7

FastEthernet0/7

trust state: trust cos

trust mode: trust cos

trust enabled flag: ena

COS override: dis

default COS: 0

DSCP Mutation Map: Default DSCP Mutation Map

Trust device: none

qos mode: port-based

Page 4: ccnp switch LAB 7-1 Results..Telephony Support

8/12/2019 ccnp switch LAB 7-1 Results..Telephony Support

http://slidepdf.com/reader/full/ccnp-switch-lab-7-1-resultstelephony-support 4/4

ALS1#show mls qos interface fastEthernet 0/15

FastEthernet0/15

Attached policy-map for Ingress: AUTOQOS-SRND4-CISCOPHONE-POLICY

trust state: not trusted

trust mode: trust cos

trust enabled flag: disCOS override: dis

default COS: 0

DSCP Mutation Map: Default DSCP Mutation Map

Trust device: cisco-phone

qos mode: port-based

ALS1#show run interface fastEthernet 0/15

Building configuration...

Current configuration : 328 bytes

!

interface FastEthernet0/15

switchport access vlan 10

switchport mode access

switchport voice vlan 20

srr-queue bandwidth share 1 30 35 5

priority-queue out

mls qos trust device cisco-phone

mls qos trust cosauto qos voip cisco-phone

spanning-tree portfast

service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY

end

ALS2#show mls qos interface fastEthernet 0/5

FastEthernet0/5

trust state: trust cos

trust mode: trust cos

trust enabled flag: ena

COS override: dis

default COS: 3

DSCP Mutation Map: Default DSCP Mutation Map

Trust device: none

qos mode: port-based