ccna1-1 chapter 10 planning and cabling networks
TRANSCRIPT
![Page 1: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/1.jpg)
CCNA1-1 Chapter 10
Chapter 10Chapter 10
Planning and Cabling NetworksPlanning and Cabling Networks
![Page 2: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/2.jpg)
CCNA1-2 Chapter 10
Planning and Cabling NetworksPlanning and Cabling Networks
LANs: Making the Physical ConnectionLANs: Making the Physical Connection
![Page 3: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/3.jpg)
CCNA1-3 Chapter 10
Choosing the Appropriate LAN DeviceChoosing the Appropriate LAN Device
• Routers are the primary Routers are the primary internetwork devicesinternetwork devices used to used to interconnect LANs.interconnect LANs.
![Page 4: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/4.jpg)
CCNA1-4 Chapter 10
Choosing the Appropriate LAN DeviceChoosing the Appropriate LAN Device
• Hubs and switches are the most commonHubs and switches are the most common intranetwork intranetwork devices.devices.
![Page 5: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/5.jpg)
CCNA1-5 Chapter 10
Choosing the Appropriate LAN DeviceChoosing the Appropriate LAN Device
• Hub:Hub:• Regenerates all signalsRegenerates all signals
over all ports except theover all ports except theincoming port.incoming port.
• All devices share bandwidth.All devices share bandwidth.• Single collision domain.Single collision domain.• Less expensive than switches.Less expensive than switches.• Performance poorer thanPerformance poorer than
switches due to collisionsswitches due to collisionsand recovery.and recovery.
• Can extend the length of aCan extend the length of acable run.cable run.
![Page 6: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/6.jpg)
CCNA1-6 Chapter 10
Choosing the Appropriate LAN DeviceChoosing the Appropriate LAN Device
• Switch:Switch:• Sends the frame to theSends the frame to the
correct destination port.correct destination port.• Dedicated bandwidth onDedicated bandwidth on
all ports.all ports.• Segments a network intoSegments a network into
multiple collision domains.multiple collision domains.• More expensive than aMore expensive than a
hub.hub.• Enhanced reliability andEnhanced reliability and
performance.performance.
![Page 7: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/7.jpg)
CCNA1-7 Chapter 10
Device Selection FactorsDevice Selection Factors
![Page 8: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/8.jpg)
CCNA1-8 Chapter 10
Choosing a Switch - CostChoosing a Switch - Cost
Number and Types of PortsNumber and Types of PortsNumber and Types of PortsNumber and Types of Ports
A single switch or multiple?A single switch or multiple?A single switch or multiple?A single switch or multiple?
Redundancy?Redundancy?Redundancy?Redundancy?
![Page 9: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/9.jpg)
CCNA1-9 Chapter 10
Choosing a Switch – Ports/InterfacesChoosing a Switch – Ports/Interfaces
Just enough for today?Just enough for today?Just enough for today?Just enough for today?
Mixture of speeds?Mixture of speeds?Mixture of speeds?Mixture of speeds?
Both UTP and Fiber?Both UTP and Fiber?Both UTP and Fiber?Both UTP and Fiber?
When will we need more?When will we need more?When will we need more?When will we need more?
![Page 10: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/10.jpg)
CCNA1-10 Chapter 10
Choosing a RouterChoosing a Router
• Router:Router:• Match the routerMatch the router
to its purpose.to its purpose.• ExpandabilityExpandability• MediaMedia• Operating systemOperating system
featuresfeatures• SecuritySecurity• Quality of Service Quality of Service (QoS)(QoS)• Voice over IP Voice over IP (VoIP)(VoIP)• Multiple ProtocolsMultiple Protocols• Services Services (NAT / DHCP)(NAT / DHCP)
![Page 11: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/11.jpg)
CCNA1-11 Chapter 10
Planning and Cabling NetworksPlanning and Cabling Networks
Device InterconnectionsDevice Interconnections
![Page 12: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/12.jpg)
CCNA1-12 Chapter 10
LAN and WAN: Getting ConnectedLAN and WAN: Getting Connected
• Four Physical Areas:Four Physical Areas:
![Page 13: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/13.jpg)
CCNA1-13 Chapter 10
LAN and WAN: Getting ConnectedLAN and WAN: Getting Connected
• Four Physical Areas:Four Physical Areas:
Straight Through UTPStraight Through UTP2 meters (6 foot)2 meters (6 foot)
Straight Through UTPStraight Through UTP2 meters (6 foot)2 meters (6 foot)
UsersUsersUsersUsers
![Page 14: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/14.jpg)
CCNA1-14 Chapter 10
LAN and WAN: Getting ConnectedLAN and WAN: Getting Connected
• Four Physical Areas:Four Physical Areas:
Connections to hubs, Connections to hubs, switches, routers, switches, routers,
WAN links.WAN links.
Connections to hubs, Connections to hubs, switches, routers, switches, routers,
WAN links.WAN links.
Sometimes also Sometimes also contains servers.contains servers.Sometimes also Sometimes also contains servers.contains servers.
![Page 15: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/15.jpg)
CCNA1-15 Chapter 10
LAN and WAN: Getting ConnectedLAN and WAN: Getting Connected
• Four Physical Areas:Four Physical Areas:
90 Meters
Permanent LinkPermanent LinkPermanent LinkPermanent Link
![Page 16: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/16.jpg)
CCNA1-16 Chapter 10
LAN and WAN: Getting ConnectedLAN and WAN: Getting Connected
• Four Physical Areas:Four Physical Areas:
Connect Telecommunications Room(s) to Connect Telecommunications Room(s) to - Other Telecommunication rooms- Other Telecommunication rooms- The equipment room (Servers)- The equipment room (Servers)- Other buildings- Other buildings- WAN or Internet connections- WAN or Internet connections- Typically require high bandwidth- Typically require high bandwidth
Connect Telecommunications Room(s) to Connect Telecommunications Room(s) to - Other Telecommunication rooms- Other Telecommunication rooms- The equipment room (Servers)- The equipment room (Servers)- Other buildings- Other buildings- WAN or Internet connections- WAN or Internet connections- Typically require high bandwidth- Typically require high bandwidth
(Vertical cabling)(Vertical cabling)(Vertical cabling)(Vertical cabling)
![Page 17: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/17.jpg)
CCNA1-17 Chapter 10
Types of MediaTypes of Media
• Each type have their ownEach type have their ownadvantages and disadvantages.advantages and disadvantages.• Cable LengthCable Length• CostCost• BandwidthBandwidth• Ease of InstallationEase of Installation• Susceptible to EMI or RFISusceptible to EMI or RFI
![Page 18: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/18.jpg)
CCNA1-18 Chapter 10
Cable LengthCable Length
• The total length of cable to connect a device includes all The total length of cable to connect a device includes all cables from the end device in the work area to the cables from the end device in the work area to the intermediary device in the telecommunications room.intermediary device in the telecommunications room.
![Page 19: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/19.jpg)
CCNA1-19 Chapter 10
Cable LengthCable Length
• Attenuation:Attenuation:• The reduction of the strength of the signal as it moves The reduction of the strength of the signal as it moves
down a medium.down a medium.• The longer the medium the more affect attenuation has on The longer the medium the more affect attenuation has on
the signal.the signal.
![Page 20: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/20.jpg)
CCNA1-20 Chapter 10
CostCost
• Can vary from media type to media type.Can vary from media type to media type.• In a perfect setting, the budget would allow for fiber-optic In a perfect setting, the budget would allow for fiber-optic
cabling to every device in the LAN.cabling to every device in the LAN.• Provides greater bandwidth than UTPProvides greater bandwidth than UTP• Material and installation costs are significantly higher.Material and installation costs are significantly higher.
• Match the performance needs of the users with the cost of Match the performance needs of the users with the cost of the equipment.the equipment.
![Page 21: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/21.jpg)
CCNA1-21 Chapter 10
BandwidthBandwidth
• The devices in a network have different bandwidth The devices in a network have different bandwidth requirements.requirements.• For example, a server generally has a need for more For example, a server generally has a need for more
bandwidth than a computer dedicated to a single user.bandwidth than a computer dedicated to a single user.
![Page 22: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/22.jpg)
CCNA1-22 Chapter 10
Ease of InstallationEase of Installation
• The ease of cable installation varies according to cable types The ease of cable installation varies according to cable types and building architecture.and building architecture.
• Cat5 UTP:Cat5 UTP:
![Page 23: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/23.jpg)
CCNA1-23 Chapter 10
Ease of InstallationEase of Installation
• The ease of cable installation varies according to cable types The ease of cable installation varies according to cable types and building architecture.and building architecture.
• Optical Fiber:Optical Fiber:
![Page 24: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/24.jpg)
CCNA1-24 Chapter 10
EMI / RFIEMI / RFI
• Electromagnetic Interference Electromagnetic Interference (EMI)(EMI) and Radio Frequency and Radio Frequency Interference Interference (RFI)(RFI) must be taken into consideration when must be taken into consideration when choosing a media type for a LAN.choosing a media type for a LAN.• Can significantly impact data transferCan significantly impact data transfer• Electrical machinesElectrical machines• LightningLightning• Other communication devicesOther communication devices• Power cablesPower cables• Distance between buildingsDistance between buildings• Wireless security systemsWireless security systems• Radio / microwave systemsRadio / microwave systems
![Page 25: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/25.jpg)
CCNA1-25 Chapter 10
Making LAN ConnectionsMaking LAN Connections
• Devices use one of two types of UTP interfaces:Devices use one of two types of UTP interfaces:• Media-Dependent Interface Media-Dependent Interface (MDI)(MDI)• Media-Dependent Interface Crossover Media-Dependent Interface Crossover (MDIX)(MDIX)
• MDI:MDI:• Transmit:Transmit: Pins 1 and 2 Pins 1 and 2 Receive: Receive: Pins 3 and 6Pins 3 and 6• Computers, Servers, RoutersComputers, Servers, Routers
• MDIX:MDIX:• Switch the transmit and receive pairs internallySwitch the transmit and receive pairs internally• Allows use of a straight through cableAllows use of a straight through cable• Hubs and SwitchesHubs and Switches
• Many devices will now automatically detect the cable type Many devices will now automatically detect the cable type and will configure the interfaces accordinglyand will configure the interfaces accordingly..
![Page 26: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/26.jpg)
CCNA1-26 Chapter 10
Making LAN ConnectionsMaking LAN Connections
• Rule of Thumb:Rule of Thumb:
When connecting When connecting different typesdifferent types of devices, use aof devices, use a
straight through cable straight through cable..
When connecting the When connecting the same typesame type of device, use a of device, use a crossover cablecrossover cable..
When connecting When connecting different typesdifferent types of devices, use aof devices, use a
straight through cable straight through cable..
When connecting the When connecting the same typesame type of device, use a of device, use a crossover cablecrossover cable..
![Page 27: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/27.jpg)
CCNA1-27 Chapter 10
Making LAN ConnectionsMaking LAN Connections
What type of cable?What type of cable?What type of cable?What type of cable?
CrossoverCrossoverCrossoverCrossover
Straight ThroughStraight ThroughStraight ThroughStraight Through
Straight ThroughStraight ThroughStraight ThroughStraight Through
CrossoverCrossoverCrossoverCrossover
Straight ThroughStraight ThroughStraight ThroughStraight Through
![Page 28: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/28.jpg)
CCNA1-28 Chapter 10
Making WAN ConnectionsMaking WAN Connections
• Wide area connections take a number of forms, including:Wide area connections take a number of forms, including:• Telephone line RJ11 connectorsTelephone line RJ11 connectors
• DialupDialup• Digital Subscriber Line (DSL)Digital Subscriber Line (DSL)
• 60 pin Serial connections60 pin Serial connections
![Page 29: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/29.jpg)
CCNA1-29 Chapter 10
Making WAN ConnectionsMaking WAN Connections
![Page 30: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/30.jpg)
CCNA1-30 Chapter 10
Making WAN ConnectionsMaking WAN Connections
• Data Communications EquipmentData Communications Equipment (DCE) (DCE)::• A device that supplies the clocking (timing) services to A device that supplies the clocking (timing) services to
another device.another device.• Data Terminal Equipment Data Terminal Equipment (DTE)(DTE)::
• A device that receives clocking (timing) services from A device that receives clocking (timing) services from another device and adjusts accordingly.another device and adjusts accordingly.
![Page 31: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/31.jpg)
CCNA1-31 Chapter 10
Making WAN ConnectionsMaking WAN Connections
• Making WAN connections in the lab:Making WAN connections in the lab:
![Page 32: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/32.jpg)
CCNA1-32 Chapter 10
Planning and Cabling NetworksPlanning and Cabling Networks
Developing an Addressing SchemeDeveloping an Addressing Scheme
![Page 33: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/33.jpg)
CCNA1-33 Chapter 10
How Many Hosts in the Network?How Many Hosts in the Network?
• Start by determining the Start by determining the total numbertotal number of hosts. of hosts.
![Page 34: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/34.jpg)
CCNA1-34 Chapter 10
How Many Networks?How Many Networks?
• Dividing a network into subnets:Dividing a network into subnets:• Manage broadcast trafficManage broadcast traffic• Different network requirementsDifferent network requirements• SecuritySecurity• Remember the formula Remember the formula 22n – 2 – 2
• Counting the subnets:Counting the subnets:• Each subnet will require some type of router interface as Each subnet will require some type of router interface as
a gateway for that subnet (physical segment).a gateway for that subnet (physical segment).• Each WAN connection is a separate subnet.Each WAN connection is a separate subnet.
• Subnet Masks:Subnet Masks:• A unique subnet, subnet mask and range of host A unique subnet, subnet mask and range of host
addresses for each physical segmentaddresses for each physical segment
![Page 35: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/35.jpg)
CCNA1-35 Chapter 10
How Many Networks?How Many Networks?
![Page 36: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/36.jpg)
CCNA1-36 Chapter 10
Designing the Address StandardDesigning the Address Standard
• Group devices according to typesGroup devices according to types and allocate a logical block and allocate a logical block of addresses within the address range of the network.of addresses within the address range of the network.
GeneralGeneralUsersUsers
GeneralGeneralUsersUsers
SpecialSpecialUsersUsers
SpecialSpecialUsersUsers
NetworkNetworkResourcesResources
NetworkNetworkResourcesResources
Router LAN Router LAN InterfacesInterfaces
Router LAN Router LAN InterfacesInterfaces
Router WAN Router WAN InterfacesInterfaces
Router WAN Router WAN InterfacesInterfaces
Management Management AccessAccess
Management Management AccessAccess
![Page 37: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/37.jpg)
CCNA1-37 Chapter 10
Designing the Address StandardDesigning the Address Standard
There is There is NONO specific answer specific answerto designing the address standard.to designing the address standard.
Just make sure it is followed on every subnet.Just make sure it is followed on every subnet.
GeneralGeneralUsersUsers
GeneralGeneralUsersUsers
SpecialSpecialUsersUsers
SpecialSpecialUsersUsers
NetworkNetworkResourcesResources
NetworkNetworkResourcesResources
Router LAN Router LAN InterfacesInterfaces
Router LAN Router LAN InterfacesInterfaces
Router WAN Router WAN InterfacesInterfaces
Router WAN Router WAN InterfacesInterfaces
Management Management AccessAccess
Management Management AccessAccess
![Page 38: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/38.jpg)
CCNA1-38 Chapter 10
Planning and Cabling NetworksPlanning and Cabling Networks
Device InterconnectionsDevice Interconnections
![Page 39: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/39.jpg)
CCNA1-39 Chapter 10
Device InterfacesDevice Interfaces
• Cisco devices (routers and switches) have several types of Cisco devices (routers and switches) have several types of interfaces associated with them.interfaces associated with them.
• Cisco 2811 Router:Cisco 2811 Router:
ConsoleConsoleConsoleConsoleAuxiliaryAuxiliaryAuxiliaryAuxiliary
EthernetEthernetEthernetEthernetSerialSerialSerialSerial
![Page 40: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/40.jpg)
CCNA1-40 Chapter 10
Making the Device Management ConnectionMaking the Device Management Connection
• Typically, networking devices do not have their own displays, Typically, networking devices do not have their own displays, keyboards, or input devices.keyboards, or input devices.• Accessing a network device for configuration, verification, Accessing a network device for configuration, verification,
or troubleshooting is made via a connection between the or troubleshooting is made via a connection between the device console interface and a computerdevice console interface and a computer..• To enable this connection:To enable this connection:
• The computer is physically connected to the The computer is physically connected to the console port of the device.console port of the device.
• The computer runs a program called a terminal The computer runs a program called a terminal emulator emulator (HyperTerminal)(HyperTerminal)..
![Page 41: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/41.jpg)
CCNA1-41 Chapter 10
Making the Device Management ConnectionMaking the Device Management Connection
![Page 42: CCNA1-1 Chapter 10 Planning and Cabling Networks](https://reader036.vdocuments.us/reader036/viewer/2022062803/56649f005503460f94c16630/html5/thumbnails/42.jpg)
CCNA1-42 Chapter 10
Making the Device Management ConnectionMaking the Device Management Connection
HyperTerminalHyperTerminalHyperTerminalHyperTerminal