ccna training » ccna drag and drop sim question

Type text to search here...

Home > CCNA Drag and Drop SIM Question

CCNA Drag and Drop SIM QuestionOctober 21st, 2010 Go to comments

Question:

You have been hired by Specialty Hardware Incorporated to document the layout of the network. Complete the followingtasks: Complete the network topology shown in the graphic by dragging the labels below with the appropriate routertypes, interface types, and IP addresses to the graphic . Find the information you need by using the router consoleattached to the R-CENTER router.

Answer and explanation:

This is the simplest lab question in four labs you see in the real CCNA exam. First we should identify the types of these

Ads by Google CCNA Answers CCNA Practice Exam Cisco CCNA 640 802 Exam CCNA Simulator

Official Cisco Course CCNA, CCDA, CCNP, CCSP, CCVP, CCIP, CCDP, CCIE www.koenig-solutions.com

CCIE / JNCIE Rack Rental $79/mo - Up to 360 hours Over 20 network devices lab.ghoudakis.com

CCNA / CCNP Boot Camps in Kerala, the God's Own Country Best lab facilities, Best faculty www.ipsr.org

1/3/2011 CCNA Training » CCNA Drag and Drop …

9tut.com/65-ccna-drag-and-drop-sim-… 1/7

routers by using the show cdp neighbors command:

There are 3 columns we should pay more attention to:

+ Local Interface: the interface on the device you are using “show cdp neighbors” command. In this case it is theinterface of R-CENTER router

+ Platform: the platform of neighbor device

+ Port ID: the neighbor device’s port or interface on which the CDP packets are multicast

From the exhibit, the “Local Interface”, “Platform” and “Port ID” columns, we can identify where these four routers shouldbe placed and their corresponding associated ports

Finally, use the show running-config command to find out the ip addresses of four interfaces on R-CENTER



And we can easily assign corresponding ip addresses to four neighbor routers, which are on the same network with R-CENTER router’s interfaces

Please remember in the real CCNA Exam the routers’ types, ip addresses and interfaces may be different! So make sureyou understand how it works.

Other lab-sims on this site:

CCNA Access List Sim

CCNA NAT SIM Question 1

CCNA NAT SIM Question 2

Virtual Routing Emulation Visually create dynamic multihop networks with free bootable CD www.candelatech.com/xorp

I passed the CCIE R&S Lab on my first attempt! Steve Clarkin - CCIE #25821 www.INE.com/CCIE

Pass ACCA Exams 1st Time Career Service, LSBF ACCA Tutors Team+ Fully funded MBA/MSc Degree www.CA-MB



CCNA Frame Relay Sim

CCNA Configuration SIM Question (RIPv2 SIM)

CCNA VTP SIM

CCNA EIGRP LAB

CCNA Implementation SIM

Comments

1. mohsin soudagarDecember 7th, 2010

thanks admin…i can do it in sleep even

2. HungDecember 10th, 2010

For determine the ip of neighbor routers, you can also use “sh cdp neighbors detail”

3. alDecember 11th, 2010

I also think it is a one-command lab: show cdp neighb detail

4. QayummagiDecember 14th, 2010

please ccna Questons and answers


i can do it in sleep even


thanks

7. RobDecember 15th, 2010

hi all, will there deffently be this drag and drop in the ccna exam???

8. Phu_dtrDecember 17th, 2010

Thanks you Admin



9. $tupidguyDecember 19th, 2010

hi, I downloaded the packet tracer file regarding this question. What is the password to get in to the router? I triedcisco, class, 9tut

pls help me, thanks

10. $tupidguyDecember 19th, 2010

Sorry, guys, its okay, i don’t need to check other four routers, only the center one, it worked! no password isthere! thanks dude.

The people who behind it, we should pay him something, this is not charge or service fees, i believe this is gift!Thanks again!

11. xallaxDecember 22nd, 2010

“I also think it is a one-command lab: show cdp neighb detail”AL is right about this especially when it comes to finding out the ip address of the interfaces from the neighboringrouters.

you are guessing it is x.x.x.2/24, it could be any other number.

1. No trackbacks yet.

Add a Comment

Name

Website (not required)

Submit Comment

Subscribe to comments feedCCNA Implementation SIM CCNA EIGRP LAB Question

CCNA 640-802

CCNA Lab SimCCNA – Access List QuestionsCCNA – WANCCNA – OSPF QuestionsCCNA – EIGRP QuestionsDHCP Group of Four Questions



CCNA – Drag and Drop 1CCNA – Drag and Drop 2CCNA – Drag and Drop 3CCNA – Drag and Drop 4CCNA – HotspotCCNA – IPv6 QuestionsCCNA – SubnettingCCNA – Operations 1CCNA – Operations 2CCNA – Operations 3CCNA – Troubleshooting 1CCNA – Troubleshooting 2Share your CCNA Experience

CCNA Self-Study

Practice CCNA GNS3 LabsCCNA Knowledge

Network Resources

CCNA FAQs & TipsFree Router Simulators

ICND1/ICND2 Website

CCNP - ROUTE Website

CCNP - SWITCH Website

CCNP - TSHOOT Website

CCNA Voice Website

CCNA Security Website

CCDA Website

CCIE Written Website

Support 9tut

Your contribution will help keep this site updated!



TopCopyright © 2010 CCNA TrainingPrivacy Policy. Valid XHTML 1.1 and CSS 3.

Ads by Google

CCNA Simulator

Cisco CCNA Voice

CCNA Router Lab

CCNA Online



ccna training » ccna drag and drop sim question

Documents