ccboot

CCBoot - LAN Boot Software for Windows

LAN Boot Solution Background

LAN boot is a technology based on IP (Internet Protocol), UDP (User Datagram Protocol), DHCP (Dynamic Host

Configuration Protocol) and TFTP (Trivial File Transfer Protocol). It requires two computers: LAN boot server and

client. The client is a computer you want to boot up over LAN, while the server is a computer which provides

necessary data such as NTLDR, NBP (Network Boot Program), system image and so on for client booting over LAN.

LAN boot program allows to remote boot a computer over LAN without a hard disk. It is therefore ideally suited

for both diskless and thin clients. CCBoot support install windows xp over lan and install windows xp over

network.

For LAN boot solution, the boot process is as bellow:

1, Power on,

2, Load BIOS,

3, PXE stack built-in the NIC (Network Information Center),

4, Download NBP (Network Boot Program) from server to client's RAM by TFTP,

5, NBP's responsibility to perform the next step (a.k.a. 2nd stage boot).

As an administrator responsible for a network of about dozens of computers or more, LAN boot solution will

drastically reduce your daily workload. If you want to install or upgrade various softwares for all computers in the

network, you just need to do it once. It can also bring you enhanced Disaster Recovery solutions.

I.

Using CCBoot to Build a LAN Boot ServerII.

Install LAN Boot Server with CCBoot - An All-in-one LAN Boot Software

Download LAN boot software - CCBoot server installation package from - http://www.ccboot.com

/download.htm.

Launch ccbootsetup.exe on the LAN boot server and keep press the next button to the end.

Figure 1

CCBoot will use the following ports – 67 (DHCP), 69 (TFTP), 3260 (iSCSI), 1000 (Image Upload), 8001 (Service

Control). You need to open these ports in the firewall of the LAN boot server. Since CCBoot v2.1, you also

need to open port 66. V2.1 uses port 66 as DHCP backup.

Note: Please shut down the other DHCP services on the LAN especially the DHCP service in the router.

Launch CCBoot and you will get the main interface as bellow:

A.

POP Links

Client Diskless Boot Failed

Server Hardware Requirements

Disk Cache Settings and Recommend

Server OS System Requirements

How to Solve Client Lag and Unsmooth

Solutions for Blue Screen

Single Image for Multiple Specs

3rd Party DHCP and TFTP

Performance Optimization

Diskless Boot Troubleshoots

Hardware Recommended

CCBoot Langauge Translation

Classic Case

Russia Cyber Cafe

Thailand Cyber Cafe

A Cyber Cafe in Hebei Province China

A Cyber Cafe in Zhejiang Province China

What's New

Build LAN Boot Server with CCBoot

Select Language ▼

Home Features Downloads Purchase Support Contacts

How to LAN Boot Windows XP, Windows 7, Vista with LAN Boot so... http://www.ccboot.com/lan-boot.htm

1 of 6 10-02-2014 19:09

Figure 2

Initialize The LAN Boot Server

Demo Environment

Server IP: 192.168.1.10

Gateway: 192.168.1.1

DNS Address: 192.168.1.1

IP Mask: 255.255.255.0

DHCP Range: 192.168.1.101-192.168.1.254

Launch the LAN boot software - CCBoot, menu "Options"->"Options Wizard" and configure step by step as

bellow:

Figure 3

You need to select the correct local IP address as "DHCP Server IP". Press "Scan DHCP" to check if there are

other DHCP services on the LAN. You need to stop other DHCP services on the LAN.

Figure 4

B.


2 of 6 10-02-2014 19:09

Set "Server IP Address". Normally, it’s the same as "DHCP Server IP".

Set "Write-back File Path" and "Image Save Path" as you want.

"Write-back File Path" is used to store the LAN booted clients’ write-back data. You’d better use a big volume

hard disk as "Write-back File Path". This disk should be formatted as NTFS and 64K bytes per cluster.

"Image Save Path" is used to store the images for LAN booting. This disk should be also formatted as NTFS

and 64K bytes per cluster. You’d better use a fast speed hard disk as "Image Save Path". For example, use an

SAS hard disk.

Figure 5

Keep default values in "Server Cache Settings".

Figure 6

Keep default values in "Other Settings". Press the "Finish" button and confirm the popup dialog box.

Create Image for LAN Boot Windows XP

To boot Windows XP with the LAN boot software - CCBoot, you first of all need to create a system image and

here're the steps -

Choose one client PC as master PC used to create LAN boot image. Attach a hard disk on the PC.1.

Delete all partitions first. Allocate a small MBR partition about 40G size and leave the rest unallocated.

Format the 40G partition with NTFS. Install Windows XP and the latest SP into this partition.

2.

After complete Windows installation, open the local area connection network properties and configure as

bellow:

3.

C.


3 of 6 10-02-2014 19:09

Figure 7

Click "Properties".

Figure 8

Select "Internet Protocol (TCP/IP)" and click "Properties".

Figure 9

Select "Obtain an IP address automatically" and "Obtain DNS server address automatically", then click

"OK" to save.

On the CCBoot LAN boot server you will find a client in the client list (Figure 10) that was added by

CCBoot automatically when the client PC got IP address from the CCBoot DHCP service.

4.


4 of 6 10-02-2014 19:09

Figure 10

Double click the client to edit and check both "Enable Upload Image" and "Keep Write-back File" (Figure

11), when press "save" button it will ask you "Are you sure to delete write-back file?" Just press "No".

Figure 11

5.

Download CCBoot client installation package from: http://www.ccboot.com/download.htm. Launch

ccbootsetupclient.exe and keep press the next button to the end. Then launch CCBoot client and you will

see the main interface as bellow (Figure 12).

Figure 12

6.

Press the "Install CCBoot Client" button. After finished, it will require reboot system. Reboot the client PC.7.

After reboot, launch CCBootClient again, input the correct "Server IP address", it should be the IP address

of the PC on which CCBoot server has been located. Input the image file name as you want in the "Image

File Name". Press the "Upload Image" button to upload the image to the CCBoot server. Then CCBoot will

create an image in the server "Image Save Path".

Note: CCBoot supports two types image file format. It supports VMDK if you are using Windows 2003 as

CCBoot server system. It will support both VMDK and VHD if you are using Windows 7 or Windows 2008.

As you can see in Figure 12, the file format depends on what you have set for "Image File Name". For

8.


5 of 6 10-02-2014 19:09

example, "XP01.vmdk" and "XP01.vhd".

LAN Boot Windows XP over Network

On CCBoot LAN boot server, double click PC101 (Figure 10) to open the master PC’s properties dialog box,

uncheck "Enable Upload Image" and "Keep Write-back File".

1.

Remove the HDD from the master PC, set it firstly boot from network (or LAN, PXE rom, or some other

similar settings) in BIOS settings so that it will start LAN booting Windows XP.(Figure 13).

Figure 13

2.

The first time LAN boot Windows XP on the master PC, you can modify its computer name (Figure 14).

Figure 14

Set the computer name as you wish then press enter key to boot it over network (Figure 15).

Figure 15

3.

On CCBoot server, "Options" -> "Settings" -> "Default Client Settings" -> "Disk Group" -> press the ">>"

button, select "XP01.vmdk" as the default boot image in "System Image Selection" section.

4.

Do the same as Step 2 and Step 3 for other client PCs with the same specifications as the master PC to

implement LAN boot resolution for them.

5.

D.

LAN Boot Windows 7 and Vista

LAN boot Windows 7 step by step.

LAN boot Vista step by step.

E.

More information:windows xp fails to load network values

Use LAN Boot Software - CCBoot to LAN Boot Windows XP/7/Vista/2003/2008!

© 2000-2014 Youngzsoft All Rights Reserved | Diskless Boot Solution and System


6 of 6 10-02-2014 19:09

ccboot

Documents

lan boot serverii

ccboot lan boot software

lan boot server andclient

boot process

stage boot

lan boot windows xp

nbp network boot program

dhcp server ip