cathodic protection, monitoring and electric field
TRANSCRIPT
UNDERWATER WEAPON SYSTEMS
CATHODIC PROTECTION, MONITORING AND ELECTRIC FIELD MITIGATION SYSTEM
SOK
WE BUILD SECURITY FROM THE SEA
The Cathodic Protection, Monitoring and Electric Field Mitigation System (SOK) performs two functions:
www.ctm.gdynia.pl
Multisectoral Cathodic Protection and Electric Field Mitigation Station, which performs system control through automatic adjusting of the DC, is equipped with a measuring module to monitor and minimize the electric field of the ship;
Polarizing anodes used to supply power through electrolytic environment up to the protected object;
Control and steering electrodes used to measure the potential of the protected object to control the operation of the cathodic protection system;
Reference electrode used for the system for minimization of the electric field;
Device short-circuiting the screw shaft used for electrical connection of drive shafts with the mass of the hull of the vessel.
active protection of the vessel from electrochemical corrosion
monitoring and minimizing of the electric field of the ship.
The Cathodic Protection, Monitoring and Electric Field Mitigation System consists of the following elements:
www.ctm.gdynia.pl
WE BUILD SECURITY FROM THE SEA
CATHODIC PROTECTION, MONITORING AND ELECTRIC FIELD MITIGATION SYSTEM
SOK
UNDERWATER WEAPON SYSTEMS
PARAMETERSMULTISECTORAL CATHODIC PROTECTION AND ELECTRIC FIELD MITIGATION STATIONType of work:Operation modes:Number of sectors:Power supply:Weight:Control panel:Casing:POLARIZING ANODESActive area of the anode:Diameter:Current carrying capacity:CONTROL AND STEERING ELECTRODES Material:Diameter:REFERENCE ELECTRODE (USED FOR THE MITIGATION OF THE ELECTRIC FIELD)Material:Diameter:DEVICE SHORT-CIRCUITING THE SCREW SHAFT Matching the diameter of the drive shaftsSupplied with DC voltmeter
Cathodic protection, monitoring and electric field mitigationAutomatic, manualDepending on the type and size of the protected object 230 AC, 50 Hz ÷ 60 Hz,60 kgTouch screenStandard 19'' rack unit
Titanium coated with iridium oxide and tantalum 80 mm, 110 mm, or adjusted to the size of the protected object20 A, 30 A, or tailored to the current needs of the protected object.
zinc45 mm
zinc45 mm