PU 458NOVATTANE 3100

POLIFLEX PLUSPOLIFLEX PRO (Hybrid)

STANDARD K-1

One component (RTV) polyurethane with different modulus and adhesion depending on the support.

Two-component polyurethane to glue important surfaces or for structural adhesion:

New technology: One component (RTV) adhesive /sealant (hybrid of polyurethane and silicone). UV resistant, paintable, applicable

on slightly wet surfaces. Can be transparent like crystal. With different modulus and flexibility. The H-200 has a very high initial

tack (green strength).

SILKRON POLYMER H-75SILKRON POLYMER H-100SILKRON POLYMER H-200

POLIFLEX PRO

Monograde or Multigrade, Diesel or Gasoline, Mineral or Synthetic, Passenger Cars or Heavy Duty, API or ACEA Standard, different SAE viscosities

• LHM (ISO 7308) • ATF-C3/46 and C3/100 (SAE 10W and SAE 30, Allison C3; GM: A sub A) • ATF D.21247 (SAE 10W; Dexron II; Allison C-4) • ATF SYNTHETIC D3 (SAE 10W; Dexron III)• KROIL TRACTOR TU

For high temperature: • KROIL SINTLUBE 2000 • LKC NEW • LUBECER

SILKRON range

One component (RTV) high quality silicones with high modulus and solvent free. The SILKRON HT Acetoxy and SILKRON SILENE are

homologated for Food Contact. All are F.I.P.G. (Form-In-Place-Gaskets).

• FH-EP (DIN / ISO: HL / HM)• FHV (DIN / ISO: HLP / HM)• HIDROP HV (DIN HLVP-D)• HIDROP P (DIN HVLP, POCLAIN) • KROIL BASELA CP (DIN: VCL – VDL; ISO: DAB – DAG – DAM)• KROIL BASELA G (DIN: HLP/CLP; ISO: HM/HG).

Ranges with different viscosities

• KROIL BASELA (Mineral; DIN CLP; ISO CKC)• KROIL SINTLUBE (Synthetic; DIN CLP; ISO CKC) • SUPER KROIL MR (Non-Newtonian Gel)

Ranges with different viscosities

KSHT

SPGSILENE

Acetoxycure:

KS NEUTRAL HT NEUTRAL

Neutralcure:

HTSILENE

Hightemperature:

KGP-2/P

KGP-2/P-E

KGP-2/PLEX 1500

KGP-2/M

KGP-2/F

BASELA 12 PG

SITELA 2

Q3-4612

ANTISEIZE 907

DRILL GREASE

K 165 X

Q4-5104

BASELA 3 COMPOUND

STONE GREASE

KCS

GCG-3

KOP-300

KL 2

KEP

KEP-2-GF

KLX-2R

KEC

KMS

KL COMPLEX 150

KL COMPLEX 280

KL COMPLEX 2000

KL COMPLEX 200

HAMMER GREASE

BASELA BC 2

FOODSLIP MP2

Al Complex

Al Complex

Al Complex

-

Al Complex

Inorganic

Polyurea

-

-

Li

-

Li

Inorganic

Ca Special

Ca

Ca

Ca Anhydrous

LI

LI

Ca Special

Li

Li

Li

Li Complex

Li Complex

Li Complex

Li Complex

Al Complex

Li Complex

Inorganic

Mineral

Mineral

Semi synth

Semi synth

Semi synth

PAG

Mineral

Mineral

Semi synth

Mineral

Mineral

Mineral

Silicone

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Mineral

Synthetic

Mineral

Graphite, EP

Gr, MoS2, EP

Graphite, EP

GR, C, EP

Graphite, EP

MoS2, AW, C

AW, O, C

Gr, MoS2

Copper

Zinc, AW, C

Solvent, MoS2

Gr, AW, O, C

-

EP, AW

No

Gr

C, EP

O, C, AW

O, C, AW, EP

O, C, AW

O, C, EP, AW

AW, EP

EP, MoS2

EP

O, C, EP, AW

O, C, EP, AW

EP

O, C, EP, AW

C, AW, PTFE

PTFE, C

-20 to 150

-20 to 150

5 to 150

-20 to 150

5 to 150

-30 to 200

-25 to 170

up to 450

-

-25 to 115

-15 to 45

-25 to 130

-40 to 200

-15 to 100

-10 to 55

-

-25 to 110

-30 to 130

-30 to 125

-40 to 90

-30 to 120

-50 to 120

-30 to 130

-20 to 170

-15 to 160

-10 to 150

-20 to 200

-

-60 to 180

-20 to 150

***

***

***

***

***

***

***

*

***

***

***

**

***

****

****

***

****

**

***

**

**

**

**

**

***

***

**

***

**

***

THICKENERNAME

* minimun resistance **** maximun resistance O= antiOxidant C= antiCorrosion EP= Extreme Pressure AW= AntiWear Gr= GraphiteAditives:

OIL ADDITIVE APPLICATIONSWORKINGTEMP. °C

WATERRESIST.

***

***

***

***

***

***

***

****

***

***

**

***

*

**

*

**

***

**

***

**

***

**

***

***

***

****

**

***

**

**

Open gear adhesive grease for spray application: service (ISO VG 1000).

Open gear adhesive grease for spray application: running in.

Open gear adhesive grease for spray application: service (ISO VG 2500).

Open gear adhesive grease for manual application.

Open gear adhesive grease for dip lubrication.

Multipurpose at high temperature, non melting.

High performance multipurpose; continuous steel casting bearings.

Pre-treatment paste for gear or for assembly.

Paste for threaded connections (assembly).

Paste for threaded connections of rods drilling; electricity conductive.

Adhesive lubricant for open gears and wire ropes.

Non dripping grease. Rubber tyre mould closing mechanism; slow movement.

Silicone compound for joints, valves and pipes fitting.

Centralized lubrication in marble cutting.

Demandless non closed mechanisms. Springs, chassis.

Pantograph lubrication (electrical train).

Public Work special grease. High resistance to water and impacts.

Multipurpose.

Multipurpose high EP, for shock, loads and lower speed.

Tripoid joints (for cars), low temperature.

Railways: housing box bearing + multipurpose.

Centralized lubrication for trucks and buses.

MULTIPURPOSE HIGH EP. Emergency greasing.

High temperature grease. Grids, big fans, etc.

Continuous steel casting roller bearing + hot roller mill bearings.

Roller press bearing (Cement). High loads, low speed, water presence.

High temperature grease. Grids, big fans, etc.

Hydraulic breaker hammer (chisel).

Very low temperature grease, low friction.

Multipurpose for food industry.

PRESSURERESIST.

0-00

0-00

0-00

0-00

00

1

1-2

-

-

2

-

-

3

1

2

3

2

2

00, 0, 1, 2, 3

2

2

00-000

2-3

2

2

1

2

1-2

2

2

NLGI

-25 °C.-37 °C, G12 type.Temperature according dilution, MERCEDES-BENZ 325.3.-37 °C, MERCEDES-BENZ 325.3.

(with anti-cavitation additives)

ENGINE MAX 100%ENGINE MAX 50%

ACU 2300 100%ACU 2300 50%

Temperature according dilution.-37 °C.Temperature according dilution, MERCEDES-BENZ 325.0.-37 °C, MERCEDES-BENZ 325.0.

ENERGY PLUS 40%ENERGY PLUS 50%

K-140 ENERGY PLUS 100%K-140 ENERGY PLUS 50%

More than 3.000 hours - Shine (Mirror effect).More than 3.000 hours - Matt finish.More than 1.300 hours - Perfect finish (no after treatment needed).

GALVA FLASHGALVA MATEGALVA INOX

Multipurpose – Good penetration – Very sticky and viscous after solvent evaporation.Same as previous but with PTFE solid lubricant.Multipurpose grease, NLGI 1, from -20ºC up to +140ºC.Multipurpose grease with MoS2, for high loads and shocks, from -20ºC up to +120ºC.Anti-seize effect, NLGI 1, from -20ºc up to +1200ºC (under dry lubrication).Anti-stick, water repellence effect, good plastic-rubber compatibility, from -40ºC up to +300ºC.For open gear and wire rope, with graphite.

GREASE SPRAYGREASE SPRAY WITH PTFE

LITHIUM GREASEMoS2 GREASE

HIGH TEMPERATURE GREASESILICONE GREASE

EXTREME PRESSURE GREASE KP-6

MULTIPURPOSE LUBEGRAPHITE LUBE

FOODSLIP SPRAY OIL with PTFESILKROIL E-1

CUTTING FLUIDTAPPING FLUID

It displaces water and moisture, it is penetrant, lubricant, rust-loosener, dielectric.Highly penetrant fluid with graphite, loosening all rust blocked parts.Food grade oil (H-1 type), multipurpose.Plastic and rubber mould release, based on silicone.For hard and soft metal, at high cutting speed.Drilling, milling or turning, manual operation, low speed, hard and soft metal.

For any kind of electrical or electronic contact.To avoid slippage of worn out drive belts.With fast evaporation solvent.Anti-adherent for weld spatter, silicone free, non flammable.Based on silicone.Silicone free, it allows further surface treatment.

CONTACT CLEANERBELT DRESSING

DEGREASERANTI SPATTER

MOULD RELEASE FOR PLASTICS S-10MOULD RELEASE FOR PLASTICS E-20

(temperature according dilution)-4 °C-10 °C-17 °C-37 °C

UNIVERSALCONCENTRATED

CC 10%CC 20%CC 30%CC 50%

Krafft is in this field since more than 30 years and has built an important experience. Krafft can supply the full range of lubricants needed for a complete cement plant and mine:from multipurpose greases and oils up to special lubricants.

Coming to the specialties and to the lubrication of the big open gears of kilns and mills, Krafft is the leader in the Spanish market and is supplying many countries all around the world. We would like to point here some specialties:

For mill’s and kiln’s OPEN GEARS

* Q3-4612 priming paste for pre-treatment before running in process.

* KGP-2/P-E sprayable running in grease with graphite and MoS2.

* KGP-2/P sprayable service grease with graphite and high base oil viscosity (ISO VG 1000).

* KGP-2P/PLEX 1500 sprayable service grease with graphite and higher base oil viscosity (ISO VG 2500).

* KGP-2/F service grease with graphite for dip(bath) lubrication.

* KGP-2/Mservice grease with graphite for manual lubrication.

For ROLLER PRESS BEARINGS

* KL COMPLEX 2000 high EP characteristics with solid lubricant, lithium complex soap.

For kiln’s LOOSE TYRES

* KROIL ESPECIAL RING special suspension of graphite in water.

For the wind tower, we are offering basically adhesive /sealant and coolant-antifreeze.

• NOVATTANE 3100:structural adhesive to repair blades.

• SILKRON POLYMER H-100:hybrid to seal rotor hub and for general sealing.

• SILKRON POLYMER H-200:hybrid with very high initial tack (green strenglh).

• SILKRON POLYMER H-75:hybrid to seal housing.

• POLIFLEX PRO: general sealing (one is crystal clear).

• ENERGY PLUS 50%:coolant working till -37ºC, new type D technology (organic), long lasting.

For solar energy (photovoltaic and thermal), we are offering basically also sealants-adhesives, but besides chemical anchoring and cleaning products.

• SILKRAF Neutral:RTV silicone sealant-adhesive, mainly during manufacturing process.

• SILKRON POLYMER H-100, H-200 and H-75: hybrid, mainly used to install the panels.

• POLIFLEX PRO:hybrid used mainly because it is completely transparent.

• ANCLAPAK M-15, M-18, M-30:range of chemical anchoring products.

• SHAMPOO Energic HD 200, HD 180, SHAMPOO N-140, Glass Cleaning Spray: to clean the panels in order to keep their efficiency.

In the nineties, Krafft started to work with an important steel industry in Spain to develop a special grease for the continuous casting line and for the hot milling line. This grease was to lubricate the bearings of all the rollers. Furthermore as the grease is applied by centralized lubrication, it was necessary to have the correct fluidity and rheology to be pumped through the long piping circuit.

For that application, Krafft developed 2 kind of greases:

• One is polyurea grease with a high base oil viscosity (ISO VG 460): it is the SITELA range.

• As a cheaper alternative, we developed also a lithium complex grease : it is our KL COMPLEX 280.

For hot forging and stamping, Krafft is offering products with and without graphite:

• Suspension of graphite in oil: KROIL 10, KROIL 22, KROIL 33

• Graphite-free, water based, salts with Diesel effect: KROIL 1.705

Besides these special greases, we have also other kind of greases and oils which allow lubricating practically all the rest of the equipment in a steel industry.

• KL:Multipurpose lithium grease

• KEP range:EP multipurpose lithium grease

• KMS:EP multipurpose lithium grease with MoS2, for high loads and/or shocks

KRAFFT is offering adhesive-sealants, lubricants and coolants-antifreezes for the transport industry: railways, trucks, trailers, buses and taxis fleets…

Adhesive-Sealants:

• The hybrids SILKRON POLYMER H-100, H200 and H-75, POLIFLEX PRO and the polyurethane POLIFLEX PLUS are mainly used:

- to fix and seal panels.

- to seal door- and window frames.

• The polyurethane Standard K-1: for wind-screen (structural adhesive)

• The range of silicone sealants: the SILKRON range. In particular the SILKRON SPG widely used for F.I.P.G. (Form-In-Place-Gaskets).

Greases

• KEC: central lubrication of vehicle’s chassis.

• HAMMER GREASE: for public works: hydraulic hammer.

• VN 2461 C: grease for CV (homocinetic) joints.

• KEP 2 GF: Tripod joints.

• KEP 2 GF/M2: steering rack, small gearboxes.

• ANTI-SQUEAK MIX 29: to avoid squeak on rubber bellow.

• Q4-5879: for rubber and plastic lubrication.

• KL COMPLEX 150: long lasting lubrication (wheel bearing, …).

• BASELA BC 2: synthetic for low temperature (-60ºC).

Oils

Krafft has an extended range of oils: for engines, gearboxes, differentials, automatic transmission, hydraulic systems…

Coolants-Antifreezes:

We have the full range of coolants:

•Type C (inorganic additives), NAP free, with different concentration according the freezing temperature.

•Type D (organic additives), long life product, with different concentration also.

Krafft is highly concerned by the renewable energy and created a special task force on this area.

KRAFFT, S.L.U.Ctra de Urnieta s/n

20140 Andoain - SPAINPhone: +34 943 410 460

Fax: +34 943 410 430E-mail: export@krafft.es

An Illinois Tool Works Company

Krafft is in this field since more than 30 years and has built an important experience. Krafft can supply the full range of lubricants needed for a complete cement plant and mine:from multipurpose greases and oils up to special lubricants.

Coming to the specialties and to the lubrication of the big open gears of kilns and mills, Krafft is the leader in the Spanish market and is supplying many countries all around the world. We would like to point here some specialties:

For mill’s and kiln’s OPEN GEARS

* Q3-4612 priming paste for pre-treatment before running in process.

* KGP-2/P-E sprayable running in grease with graphite and MoS2.

* KGP-2/P sprayable service grease with graphite and high base oil viscosity (ISO VG 1000).

* KGP-2P/PLEX 1500 sprayable service grease with graphite and higher base oil viscosity (ISO VG 2500).

* KGP-2/F service grease with graphite for dip(bath) lubrication.

* KGP-2/Mservice grease with graphite for manual lubrication.

For ROLLER PRESS BEARINGS

* KL COMPLEX 2000 high EP characteristics with solid lubricant, lithium complex soap.

For kiln’s LOOSE TYRES

* KROIL ESPECIAL RING special suspension of graphite in water.

For the wind tower, we are offering basically adhesive /sealant and coolant-antifreeze.

• NOVATTANE 3100:structural adhesive to repair blades.

• SILKRON POLYMER H-100:hybrid to seal rotor hub and for general sealing.

• SILKRON POLYMER H-200:hybrid with very high initial tack (green strenglh).

• SILKRON POLYMER H-75:hybrid to seal housing.

• POLIFLEX PRO: general sealing (one is crystal clear).

• ENERGY PLUS 50%:coolant working till -37ºC, new type D technology (organic), long lasting.

For solar energy (photovoltaic and thermal), we are offering basically also sealants-adhesives, but besides chemical anchoring and cleaning products.

• SILKRAF Neutral:RTV silicone sealant-adhesive, mainly during manufacturing process.

• SILKRON POLYMER H-100, H-200 and H-75: hybrid, mainly used to install the panels.

• POLIFLEX PRO:hybrid used mainly because it is completely transparent.

• ANCLAPAK M-15, M-18, M-30:range of chemical anchoring products.

• SHAMPOO Energic HD 200, HD 180, SHAMPOO N-140, Glass Cleaning Spray: to clean the panels in order to keep their efficiency.

In the nineties, Krafft started to work with an important steel industry in Spain to develop a special grease for the continuous casting line and for the hot milling line. This grease was to lubricate the bearings of all the rollers. Furthermore as the grease is applied by centralized lubrication, it was necessary to have the correct fluidity and rheology to be pumped through the long piping circuit.

For that application, Krafft developed 2 kind of greases:

• One is polyurea grease with a high base oil viscosity (ISO VG 460): it is the SITELA range.

• As a cheaper alternative, we developed also a lithium complex grease : it is our KL COMPLEX 280.

For hot forging and stamping, Krafft is offering products with and without graphite:

• Suspension of graphite in oil: KROIL 10, KROIL 22, KROIL 33

• Graphite-free, water based, salts with Diesel effect: KROIL 1.705

Besides these special greases, we have also other kind of greases and oils which allow lubricating practically all the rest of the equipment in a steel industry.

• KL:Multipurpose lithium grease

• KEP range:EP multipurpose lithium grease

• KMS:EP multipurpose lithium grease with MoS2, for high loads and/or shocks

KRAFFT is offering adhesive-sealants, lubricants and coolants-antifreezes for the transport industry: railways, trucks, trailers, buses and taxis fleets…

Adhesive-Sealants:

• The hybrids SILKRON POLYMER H-100, H200 and H-75, POLIFLEX PRO and the polyurethane POLIFLEX PLUS are mainly used:

- to fix and seal panels.

- to seal door- and window frames.

• The polyurethane Standard K-1: for wind-screen (structural adhesive)

• The range of silicone sealants: the SILKRON range. In particular the SILKRON SPG widely used for F.I.P.G. (Form-In-Place-Gaskets).

Greases

• KEC: central lubrication of vehicle’s chassis.

• HAMMER GREASE: for public works: hydraulic hammer.

• VN 2461 C: grease for CV (homocinetic) joints.

• KEP 2 GF: Tripod joints.

• KEP 2 GF/M2: steering rack, small gearboxes.

• ANTI-SQUEAK MIX 29: to avoid squeak on rubber bellow.

• Q4-5879: for rubber and plastic lubrication.

• KL COMPLEX 150: long lasting lubrication (wheel bearing, …).

• BASELA BC 2: synthetic for low temperature (-60ºC).

Oils

Krafft has an extended range of oils: for engines, gearboxes, differentials, automatic transmission, hydraulic systems…

Coolants-Antifreezes:

We have the full range of coolants:

•Type C (inorganic additives), NAP free, with different concentration according the freezing temperature.

•Type D (organic additives), long life product, with different concentration also.

Krafft is highly concerned by the renewable energy and created a special task force on this area.