catalogue current
DESCRIPTION
Wiper for Automotive vehiclesTRANSCRIPT
-
1
Call us now it can never be too soon
to see where you're going
SCREEN WIPERS LTD
WINDSCREEN WIPER CATALOGUE
MARINE
BUS / COACH
INDUSTRIAL
RAIL
Comprehensive range of windscreen wiper solutions
www.sws.co.nz
-
2
CONTENTS
Screen Wipers Ltd are confident you will find all the data needed for most applications, but should you require more, please contact us, we will welcome the opportunity to assist you further.
TRICO
Arms, Blades ....... Pivots ..
28 30
DOGA
Marine Medium Duty ....... Small Screen Wiper Systems .... Marine Light Duty ............
31 32 33
MOTORS
Assorted ....
44
ROCA
Marine light duty ..... Small Mitsuba style .........
36 37
SWS
Classic Car Arms & Blades..
50
ACCESSORIES
Pumps & Washer equipment .... Control Switches ..... Control Panels .....
40 42 44
UNITED TECHNOLOGIES / AM
WWJ ......
38
VETUS
Marine light duty .....
35
HEPWORTH / DUDLEYS / WYNN
Rail . Marine Light Duty Motor ...... Marine Medium Duty Motors ......... Marine Heavy Duty Motors . Marine Pantograph Arms .... Naval Type Straight Line Wipers ....... Clear View Screens .... Bus & Coach Heavy Duty Kits ...... Bus & Coach Arms ...... Linkages .
3 4 6 7 10 12 13 14 17 20
SWS
Chinese Bus system ... Japanese Bus ..
2223
AFI
Marine light Duty ......
34
SWF
Bus & Coach Arms ...... Bus & Coach Linkages ....
2426
BLADES
Bosch ..... SWF & refills ....
48 49
-
3
The wiper system is designed for each customers specific requirements to give maximum swept area, utilising the best combination of components from the following ranges;
Hepworthrail provide a design facility to builders of new rolling stock as well as refurbishment of existing vehicles, where replacement of existing pneumatic or existing electric systems is required, for the following types of vehicles
Linkage systems Suppressed systems Custom built systems
Motors Arms Blades Wash equipment
High Speed Trains Locomotives Electric Multiple Units
Diesel Multiple Units Metros Trams
Meeting the challenges of rapidly developing technology alongside the stringent demands of the modern rail industry, Hepworth Rail have a reputation synonymous with quality and reliability.
HEPWORTH RAIL
-
4
HEPWORTH 2Nm LIGHT DUTY WIPER MOTOR
Voltage Starting Current Running Current
12v DC 2.5 amps 1.5 amps
24v DC 1.1 amps 0.6 amps
Motor Switch
31 Black wire Position 1 and negative ships supply
53 Blue wire (single speed)
Position 2
53a Grey wire Position 3 and Positive ships supply
Wiring the motor to a 1 pole / 2 Throw Switch
Marine The 2Nm is a compact light unit, aimed at the small boat market, where efficient clearing of win-dows is essential This unit is supplied as a fixed arc unit which is adjustable after the motor is installed. A single speed motor, 12 and 24 volt DC, it has a self parking facility which can be operated by a toggle switch. Construction is of 316 stainless steel. Pantograph and pendulum arm with blades up to 20 ins. (510mm) are available.
Specifications Pantograph Arms P5 Lengths Blade Clip
Pendulum Arms F6 Lengths Blade Clip
Blades B140 Lengths Blade Clip
Light Duty 12 to 20 (310mm to 510mm) 14mm
Light Duty 12 to 20 (310mm to 510mm) 14mm
Curved Blade 12 to 20 (300mm to 500mm) 14mm
Wiper Arms and Blades
Non Insulated Earth Return
Insulated Earth return
Pantograph
Pendulum
Unit type Voltage Standard Details Angles of Arc Pantograph Units Pendulum Units Spindle Centres Drive Liner Liner Length O/A Idler Liner Unit Weight Optional Optional Motor Cover
2Nm 12 & 24 1 Speed, Self Parking Variable at stated angles 40, 55, 65, 75, 90 40, 55, 65, 75, 90, 105 Between drive & idler 50mm M20 SS Liner / 12mm Spindle Bulkhead thickness + 70mm, + 75mm for pantograph 75, 80, 100, 110, 125mm SS spacer / 10mm SS spindle At maximum arm & blade Lengths; 1.4Kgs (3.0lbs) Insulated Earth Return Fibreglass, See page 20
Specifications
-
5
Unit type Voltage Standard Details Angles of Arc Pantograph Units Pendulum Units Spindle Centres Drive liner Liner Length O/A Idler liner Unit Weight
Specifications
Marine The 20Nm is a compact unit, aimed at the small boat market, where efficient clearing of windows is essential
This unit is supplied as a variable arc model, for 12 & 24 volt DC. The standard motor has two speeds and self parking facility which can be operated by a rotary switch, toggle switch or a multi function control switch. Insulated earth return and EMC filter are standard.
Pantograph and pendulum arms with blades up to 24 ins. (610mm)
20Nm 12 & 24 2 Speed, Self parking, Insulated Earth Return Variable at stated angles 45, 50, 60, 70, 80, 90 45, 50, 60, 70, 80, 90 Between drive & idler 50mm M20 SS Liner / 12mm Spindle Bulkhead thickness + 40mm, + 48mm for pantograph 70, 100mm M20 SS Liner / 12mm Spindle At maximum arm & blade Lengths; 3.5Kgs (7.7lbs)
HEPWORTH 20Nm MEDIUM DUTY WIPER MOTOR
Pantograph
Pendulum
Specifications Pantograph Arms P613 Lengths Blade Clip
Pendulum Arms F63 Lengths Blade Clip
Blades B140 Lengths Blade Clip
Medium Duty 12 to 24 (310mm to 610mm) 14mm
Medium Duty 12 to 28 (310mm to 710mm) 14mm
Curved Blade 12 to 24 (300mm to 600mm) 14mm
Wiper Arms and Blades
-
6
HEPWORTH 30Nm MEDIUM DUTY WIPER MOTOR
Marine The 30Nm is a compact medium duty unit, aimed at the small boat market, where efficient clearing of windows is essential.
This unit is supplied as a variable arc model, for 12 & 24 volt DC. The standard motor has two speeds and self parking facility which can be Operated by a rotary switch, toggle switch or a multi speed function switch. Insulated earth return and EMC filter are standard.
Pantograph and pendulum arms up to 28 ins. (710mm) with blades up to 24 ins. (600mm)
Unit type Voltage Standard Details Angles of Arc Pantograph Units Pendulum Units Spindle Centres Drive liner Liner Length O/A Idler liner Unit Weight Optional Motor Cover
30Nm 12 & 24 2 Speed, Self parking, Insulated Earth Return Variable at stated angles 35 to 90 degrees 35 to 120 degrees Between drive & idler 50mm M20 Liner / 12mm Spindle Bulkhead thickness + 100mm 110, 135, 160, 200mm Brass 110mm Stainless Steel Longer available on special order M20 Liner / 12mm Spindle At maximum arm & blade Lengths4Kgs (8.8lbs) Fibreglass, See page 20
Specifications
Specifications Pantograph Arms P613 Lengths Blade Clip
Pendulum Arms F63 Lengths Blade Clip
Blades B140 Lengths Blade Clip
Medium Duty 12 to 28 (310mm to 710mm) 14mm
Medium Duty 12 to 28 (310mm to 710mm) 14mm
Curved Blade 12 to 24 (300mm to 600mm) 14mm
Wiper Arms and Blades
Pantograph
Pendulum
-
7
Specifications Pantograph Arms P615 Lengths Blade Clip P620 Lengths Blade Clip
Pendulum Arms F63 Lengths Blade Clip F63 Lengths Blade Clip
Blades B140 Lengths Blade Clip B140 Lengths Blade Clip
Medium Duty 12 to 34 (310mm to 860mm) 14mm Medium Duty 12 to 34 (310mm to 860mm) 20mm
Medium Duty 12 to 34 (310mm to 860mm) 14mm Medium Duty 12 to 34 (310mm to 860mm) 20mm
Curved Blade 12 to 28 (300mm to 700mm) 14mm Curved Blade 32 (800mm) 20mm
Wiper Arms and Blades
HEPWORTH 50Nm HEAVY DUTY WIPER MOTOR
For its size the 50Nm is a very powerful unit, adaptable for high speed vessels, workboats and leisure craft, where compact design and outstanding performance are paramount.
Marine
Unit type Voltage Standard Details Angles of Arc Pantograph Units Pendulum Units Spindle Centres Drive liner Liner Length O/A Idler liner Unit Weight
50Nm 12 & 24 2 Speed, Self parking, Insulated Earth Return Variable at stated angles 35 to 90 degrees 35 to 120 degrees Between drive & idler 50mm M20 Liner / 12mm Spindle Bulkhead thickness + 100mm 110, 135, 160, 200mm Brass 110mm stainless Steel Longer available on special order M20 Liner / 12mm Spindle At maximum arm & blade Lengths; 4Kgs (8.8lbs)
Specifications
When very wide or multiple windows are to be swept, we offer a comprehensive range of solutions utilising the 50Nm drive unit operating either two or three arms and blades off one motor.
This unit is supplied as a variable arc model, for 12 &24 volt DC. The standard motor has two speeds and self parking facility which can be operated by a rotary switch, toggle switch or a multi speed / function control switch.
Insulated earth return & EMC filter are std Pantograph
Pendulum
Pantograph and pendulum arms up to 39 ins. (1000mm) and blades up to 32 ins. (800mm)
-
8
Marine
With the ever increasing need for speed and the 24 hour day operation of todays shipping the 80Nm model gives outstanding perform-ance. To ensure a good swept window albeit travelling at 60 knots, the wiper arm design needed to ensure a good blade contact has necessitated the development of the extra heavy duty model
Supplied as fixed and variable arc models and available for 24 volt DC, the std motor has two speeds and self parking facility which can be operated by a rotary switch, toggle switch or a multi speed / function control switch. Insulated earth is standard.
Where a higher onboard voltage is used, we offer a number of solutions which will utilise this extremely reliable wiper. Pantograph and pendulum arms up to 60 ins. (1525mm) & blades up to 39 ins. (1000mm)
When very wide or multiple windows are to be swept, we offer a comprehensive range of solutions utilising the 80Nm drive unit operating either two or three arms and blades off one motor.
2 Speed, Self parking, Insulated Earth Return Variable at stated angles ( in 5 degree increments only ) 40 to 90 degrees 40 to 115 degrees Between drive & idler 60mm M26 Liner / 16mm Spindle Bulkhead thickness + 40mm 55, 85, 110mm Longer and SS available on special order M26 Liner / 16mm Spindle At maximum arm & blade Lengths; 8Kgs (17.6lbs)
Standard Details Angles of Arc Pantograph Units Pendulum Units Spindle Centres Drive Liner Liner Length O/A Idler Liner Unit Weight
Specifications
HEPWORTH 80Nm HEAVY DUTY WIPER MOTOR
Specifications Pantograph Arms P84 Lengths Blade Clip P84 Lengths Blade Clip
Pendulum Arms F80 Lengths Blade Clip F81 Lengths Blade Clip
Blades B140 Lengths Blade Clip B140 Lengths Blade Clip
Heavy Duty 24 to 60 (610mm to 1525mm) 14mm Heavy Duty 24 to 60 (610mm to 1525mm) 20mm
Heavy Duty 24 to 60 (610mm to 1525mm) 14mm Heavy Duty 24 to 60 (610mm to 1525mm) 20mm
Curved Blade 12 to 28 (300mm to 700mm) 14mm Curved Blade 32 (800mm) 36 (900mm) 39 (1000mm) 20mm
Wiper Arms and Blades
Pantograph
Pendulum
-
9
HEPWORTH 110Nm HEAVY DUTY WIPER MOTOR
Marine The power of this system is awesome. Designed for the very largest ship windows, the 110Nm gives near silent continual performance
Supplied as a fixed arc model and available for 24 volt DC, this high powered motor has two speeds and self parking which can be operated by a rotary switch, toggle switch or multi speed / function control switch.
Pantograph and pendulum arms up to 72 ins. (1830mm) are available and blades up to 78 ins.(1980mm)
Specifications Specifications Pantograph Arms
P84 Lengths Blade Clip P84 Lengths Blade Clip
Pendulum Arms F80 Lengths Blade Clip F81 Lengths Blade Clip
Blades B140 Lengths Blade Clip B140 Lengths Blade Clip
Heavy Duty 24 to 72 (610mm to 1830mm) 14mm Heavy Duty 24 to 72 (610mm to 1830mm) 20mm
Heavy Duty 24 to 72 (610mm to 1830mm) 14mm Heavy Duty 24 to 72 (610mm to 1830mm) 20mm
Curved Blade 12 to 28 (300mm to 700mm) 14mm Curved Blade 32 (800mm) 36 (900mm) 39 (1000mm) 52 (1320mm) 56 (1420mm) 64 (1625mm) 72 (1830mm) 78 (1980mm) 20mm
Wiper Arms and Blades
When very wide or multiple windows are to be swept, we offer a comprehensive range of solutions utilising the 110Nm drive unit operating either two or three arms and blades off one motor.
Standard Details Angles of Arc Pantograph Units Pendulum Units Spindle Centres Drive Liner Liner Length O/A Unit Weight
2 Speed, Self parking, Insulated Earth Return Fixed at stated angles ( in 5 degree increments only ) 45 to 90 degrees 45 to 115 degrees Between drive & idler 60mm M26 Liner / 16mm Spindle Bulkhead thickness + 55mm Liners over 110mm are Available on special order At maximum arm & blade Lengths; 9.2Kgs (20.0lbs)
Specifications
Pantograph
Pendulum
-
10
HEPWORTH PANTOGRAPH ARMS
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P612- TJ 300 to 700 12 DIN Thread 50 14
P613- TJ 300 to 710 12 DIN 10 DIN 50 14
P611- TJ 300 to 710 12 DIN 10 DIN 60 14
Marine
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P5- 300, to 510 12 DIN 10 DIN 50 14
Use with 65201700 Pantograph Plate
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P615- TJ 610 to 990 12 DIN 12 DIN 50 14
P655- TJ 610 to 990 12 DIN 12 DIN 60 14
P620- TJ 610 to 990 12 DIN 12 DIN 50 20
P635- TJ 610 to 990 12 DIN 12 DIN 60 20
P680- TJ 610 to 990 16 DIN 16 DIN 60 20
See page 48 for Bosch blades
-
11
HEPWORTH PANTOGRAPH ARMS
Marine
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P614- TJ 340 to 560 12 DIN 12 DIN 50 14
Arm Length Head Blade Clip
F6- 300, to 485 12 DIN 14
Arm Length Head Blade Clip
F63- 350, to 685 12 DIN 14
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P84- TJ 610 to 1830 16 DIN 16 DIN 60 20
See page 48 for Bosch blades
-
12
WYNN STRAIGHT LINE WIPERS
Specifications
Single Twin
Stroke Min 305mm, Max 2260mm Min 565mm, Max 4495mm
Blade Max 1000mm Max 500mm
Arm Max 800mm Max 800mm
Type C
Single Twin
Stroke Min 305mm, Max 2260mm Min 565mm, Max 4495mm
Blade Max 1000mm Max 800mm
Arm Max 800mm Max 800mm
Type D
Wipe Speed 1.4 m per second / 0.7 m per second
AC Motor Induction type : 100, 115, 230 volt
DC Motor Permanent magnet type : 24 volt
3 - PH Motor Fast speed / slow speed / intermittent
1 - PH and DC Fast Speed / intermittent
De-icing heater 200 watts per metre
Park sensor Magnetic read switch
Spray nozzles 1 up to 990mm stroke, 2 if > 1015mm stroke : 6mm overall dia tube
Mounting Above, Below, or Vertical on the window
Type approvals DNV, ABS
Type C & D
The Type C is a Heavy Duty internally mounted motor Straight line wiper. The drive shaft is taken through the ships bulkhead and the motor attached with a single bolt clam easy installation. The Type D is a Heavy Duty externally mounted motor Straight line wiper. The motor is mounted outboard and is only necessary to bring the cables through the bulkhead. The motor housing is fully sealed to I standards. they offer the most advanced design of linear action window wiping for marine and other specialist applications. By correctly matching the stroke and blade lengths, up to 80% of the window can be wiped. Fast wiping speed can provide maximum view from the ships bridge. High powered AC induction motors provide an efficient reliable operation, quiet running and no maintenance. Incorporating the highest quality Stainless steel and other non corrosive materials throughout. Control features can include 2 speed Operation, parking, intermittent, heater, master control and wash/air purge.
Cover length = Mounting + 54mm
Mounting = Stroke + 226mm
Type C
Water connection or blanking plug
20mm Heater cable
Stroke
Min 75mm Where B+(A/2) Is greater than 800mm
Min 25mm Where B+(A/2) Is greater than 800mm
131 60
Arm length Max 800mm
A
Optional lengths 35mm 140mm 200mm 220mm
98
Std 84
Type D
Cover length = Mounting + 110mm
Mounting crs = Stroke + 172mm
Spray jet
Arm Length Max 800mm
Water connection
179
87
Min 75mm Where B+(A/2) is greater than 800mm
Min 25mm Where B+(A/2) is greater than 800mm
Stroke
Heater cable
Bla
de le
ngth
100
0 m
ax
Bla
de le
ngth
100
0 m
ax
131
95
-
13
WYNN CLEAR VIEW WIPERS
PART NO. DESCRIPTION
C350-000 TYPE 'C350' HEAVY DUTY CLEAR VIEW SCREEN
CLEARLIGHT DIAMETER 350mm
115V OR 230VAC VOLTAGES
MOUNTING THICKNESS 10, 12, 16, OR 19mm
c/w 250 WATT DE-ICING HEATER & 2M CABLE
On/Off CONTROLLER LOCAL MOUNTING
WEATHER TIGHT
OR GAS TIGHT & CERTIFIED BY WYNN
CONTROL UNIT OPTIONS 1000-115-111CVS 1 Way Control Unit: 115VAC C.V.S. 1000-220-111CVS 1 Way Control Unit: 220VAC C.V.S.
ACCESSORIES C350-055-A-01 C350 CVS Tool box with spanner & fuse 1.6 amp (230v) C350-055-A-02 C350 CVS Tool box with spanner & fuse 3.15 amp (115v) C350-055-A-03 C350 CVS Tool box with spanner & fuse 5.0 amp (100v)
Perfect for all types of commercial vessels and for specialised shore - based applications. Clear view screens can be mounted in panels of toughened plate glass, laminated glass or metal ( panel thickness to be specified when ordering ). This thickness appears on the certificate of conformity and is to be specified when ordering certain spares. Designed to ISO 3904 standards, Clear View Screens provide a perfect view in any weather condition. Based on the proven high speed rotation principle, the centrifugal force created by the spinning disc throws off all rain snow or ice giving instant clear vision. Fan cooled, constant speed induction motors for single phase or three phase operation or permanent magnet motors for DC operation are available. Optional metal sheathed, ceramic filled heaters are used of the same voltage as the screen motor. For rapid ice and misting clearance, power consumption is approximately 250W.
80 100 33 71
390392 mm Hole through window
406
130
325
ref
12 off Remove for Installation
148
-
14
M 24 Volt, 2 Speed Self Park Motor, Torque 80 Nm
Pantograph Arm with Travelling Washer Jet , 60 crs
Curved Screen Blade, 20mm clip
Crank, Link, and Spindle Kit, 16mm drive-12mm idler
A
B
L
HEPWORTH / DUDLEYS LARGE DUAL SCREEN WIPER KITS
SWSA510 Heavy Duty Pantograph Wiper Kit
A 28 710 30
760 32
810 34
860
53 W 640 685 730 775 Degree Sweep B
24 610
26 660
28 700
24 610
26 660
28 700
32 810
36 905
39 1000
32 810
36 905
39 1000
H 1015 1040 1060 1065 1090 1110 1215 1260 1310 1265 1310 1360
C 330 305 285 375 350 330 320 275 225 365 320 270
A 28 710 30
760 32
810 34
860
61 W 720 770 820 875 Degree Sweep B
24 610
26 660
28 700
24 610
26 660
28 700
32 810
36 905
39 1000
32 810
36 905
39 1000
H 1015 1040 1060 1065 1090 1110 1215 1260 1310 1265 1310 1360
C 310 285 265 350 325 305 295 250 200 340 295 245
-
15
A 28 710 30
760 32
810 34
860
68 W 800 855 915 970 Degree Sweep B
24 610
26 660
28 700
24 610
26 660
28 700
32 810
36 905
39 1000
32 810
36 905
39 1000
H 1015 1040 1060 1065 1090 1110 1215 1260 1310 1265 1310 1360
C 285 260 240 325 300 280 270 225 170 310 265 215
A 28 710 30
760 32
810 34
860
75 W 880 940 1005 1070 Degree Sweep B
24 610
26 660
28 700
24 610
26 660
28 700
32 810
36 905
39 1000
32 810
36 905
39 1000
H 1015 1040 1060 1065 1090 1110 1215 1260 1310 1265 1310 1360
C 255 230 210 295 270 250 235 190 140 275 230 180
HEPWORTH / DUDLEYS LARGE SCREEN WIPER KITS
A = Arm length centre to centre B = Blade length W = Width of sweep on screen
H = Height of sweep from spindle C = Clearance between blade and spindle
Large Wrapover Wiper Kit Optare Excel
M 24 Volt, 2 Speed Self Park Motor, Torque 110 Nm
Radial Arm with Travelling Washer Jet, 740mm
Curved Screen Blade, 20mm clip, 810mm
Crank, Decelerator, Link, and Spindle Kit, 16mm drive
A
B
L
-
16
M 24 Volt, 2 Speed Self Park Motor, Torque 50 Nm
Pantograph Arm with Travelling Washer Jet, 60 crs
Curved Screen Blade, 14mm clip
Crank, Link, and Spindle Kit, 12mm drive-12mm idler
A
B
L
SWSA515 Variable Arc Pantograph Wiper Kit
A 24 610 26 660
28 710
50 to 90 W 515-
865 560- 935
600- 1005
Degree Sweep B
24 610
26 660
28 700
24 610
26 660
28 700
24 610
26 660
28 700
- 125 degrees With radial arm H 915 940 960 965 990 1010 1015 1040 1060
C 245- 125 220- 100
200- 80
290- 160
270- 135
250- 115
335- 195
310- 170
290- 150
A = Arm length centre to centre B = Blade length W = Width of sweep on screen H = Height of sweep from spindle C = Clearance between blade and spindle
HEPWORTH / DUDLEYS LARGE DUAL SCREEN WIPER KITS
-
17
HEPWORTH RADIAL ARMS
Bus and Coach
Arm LH Length Head Blade Clip
803184 740 16 DIN 20
Blade Bolt
6
Arm RH Length Head Blade Clip
803183 740 16 DIN 20
Blade Bolt
6
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P154 660, 710, 760 12 DIN 10 pedestal 50 14
Blade Bolt
4.8
Bus and Coach
Optare Excel
Optare Excel
See page 48 for Bosch blades
-
18
HEPWORTH / DUDLEYS PANTOGRAPH ARMS
Bus and Coach
Arm Length Main Head Idler Head Bridge Centres Blade Clip
803401 ( P85, 8 deg ) 860 16 DIN 12 DIN 60 20
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P85- TJ 810, 860 16 DIN 12 DIN 60 20
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P90- TJ 710, 760 16 DIN 12 DIN 60 14
P95- TJ 710, 760 16 DIN 16 DIN 60 14
See page 48 for Bosch blades
-
19
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P175- TJ 850, 1000 12 DIN 12 DIN 60 20
Arm Length Main Head Idler Head Bridge Centres Blade Clip
P153- TJ 610, 660, 710 12 DIN 12 DIN 60 14
P162- TJ 610, 660, 710 12 DIN 12 DIN 50 14
HEPWORTH / DUDLEYS PANTOGRAPH ARMS
Bus and Coach
Note: When ordering, include the length in inches in the Part number. e.g. P85-34TJ Lengths are in 2 ( 50mm ) increments TJ, Denotes Travelling Jet, ( Arms normally supplied without travelling jets, can be fitted with them ) The various wiper arms shown belong to the most up to date applications. Should your requirements differ in any way, we will come up with an alternative arm according to your specification as soon as possible
Main & Idler Heads Idler Head Bridge Centre Blade Clip
DIN Taper Thread
7/16-24NS
See page 48 for Bosch blades
-
20
Rose bearing
HEPWORTH / DUDLEYS LINKAGE SYSTEMS
10055401 12 RH 10055501 12 LH 10055200 3/8 RH 10055300 3/8 LH
10060300 M8 nut (13mm)
Nut Cap
80002200 P612, P613, P153, P162
Pivot Cap
Pantograph Plate (Marine)
65201700 8 shaft, 50 cr
60847202 12 DIN spindle, 50 cr
60044401 7/16 24 NS pivot, 50 cr
80101500 10 DIN 80206003 7/16 24 NS
Galley & Head (Idler arm)
60503500 Double ended, 60 cr
Tie Bar / Link Rod
60009324 3/8 500 L 60121355 12 115 L 60121300 12 380 L 60121302 12 460 L 60121314 12 500 L 60121372 12 700 L
LH Thread
RH Thread
60532700 double 3/8 bearing 60532300 single 3/8 bearing
Bearing Pin
6004400 3/8 Flat 2-M5 holes @ 26
60261600 40 cr, 12 rose, 13 shaft 60496301 40 cr, 3/8 rose, 13 shaft 60619801 30 cr, 3/8 rose, 9 shaft
Single Crank 30 & 50Nm
60124201 30 cr, 3/8 rose, 10-8 taper 60620701 30 cr, 3/8 rose, 12-10 taper
Spindle Weather Cap
60034600 M20 60054600 M26
1009510
60911004 57.5 cr, 12 pin, 13 shaft
Single Crank 80Nm
80002100 P153, P162
Motor Covers
65200500 2 Nm Fibreglass
10063900 30 / 50 Nm Fibreglass
80005100 P84, P85, P90, P95
Head Cap
-
21
HEPWORTH / DUDLEYS LINKAGE SYSTEMS
Spindle Vari Arc (Marine)
68003401 16 DIN, 57 liner, 60 cr 68003402 16 DIN, 85 liner, 60 cr 68003413 16 DIN, 90 liner, 60 cr 68003403 16 DIN, 110 liner, 60 cr 68003416 16 DIN, 120 liner, 60 cr 68003404 16 DIN, 135 liner, 60 cr
60598802 16 DIN drive, 90 liner, 89 cr 12 DIN idler, 90 liner, 50 cr same side 12 rose
60598702 16 DIN drive, 90 liner, 89 cr 12 DIN idler, 90 liner, 50 cr off side 12 rose 60 crs
Spindle Assembly (Bus) B / Pedal Crank
60264900 40-80, 12 rose, 13 shaft 60981600 45-90, 12 rose, 13 shaft 60256110 50-100, 12 rose, 13 shaft 60420100 55-110, 12 rose, 13 shaft 60446500 60-120, 12 rose, 13 shaft 60794100 40-80, 3/8 rose, 13 shaft 60649100 40-80, 3/8 rose, 9 shaft 60934801 45-90, 12 rose, 16 shaft
65008701 12 DIN, 57 liner, 3/8 rose 65008703 12 DIN, 110 liner, 3/8 rose 65008704 12 DIN, 135 liner, 3/8 rose 65008705 12 DIN, 160 liner, 3/8 rose 65009009 12 DIN, 200 liner, 3/8 rose 65008403 12 DIN, 110 SS liner, 3/8
Idler (Marine)
60119512 12 DIN, 80 liner 60119513 12 DIN, 110 liner 60119506 12 DIN, 150 liner 60119812 12 DIN, 80 SS liner
Same side shown
Spindle Assembly (Bus)
60650200 12 DIN, 90 liner, 3/8 rose 60650201 12 DIN, 125 liner, 3/8 rose
Spindle Vari Arc (Bus)
Liner l
ength
60981800 12 DIN, 90 liner, 66 cr Same side 10mm pin 60 crs
68005001 16 DIN, 57 liner, 12 rose 68005002 16 DIN, 85 liner, 12 rose 68005013 16 DIN, 90 liner, 12 rose 68005003 16 DIN, 110 liner, 12 rose 68005018 16 DIN, 120 liner, 12 rose 68005004 16 DIN, 135 liner, 12 rose
Spindle Vari Arc (Marine)
Adjustable in 5 degree increments
Idler (Bus)
60122611 12 DIN, 40 liner, (no plate) 60650300 12 DIN, 90 liner, 60 cr 60650301 12 DIN, 125 liner, 60 cr
Spindle & Decelerator (Bus)
60934600 16 DIN, 140 liner, 54 cr
60934700 16 DIN, 140 liner, 67 cr
60935000 Decelerator
Liner
length
Optare Excel
-
22
CHINESE SYSTEMS LARGE SCREEN WIPER PARTS
Feipeng, Designline
Arm LH Length Blade Bolt Blade Clip
FPDYG-01 675 8 20, 26
Head
16 11.8
Blade Length Bolt Diameter Blade Clip
B140-32FEI 800 8 20
Linkage Assembly Pantograph
12DIN drive, 90 liners, 73 crs
12DIN idler, 90 liners
FPLDG-0003 48.5 x 97 crank , 13 shaft coarse spline
SD2733A motor to suit See page 47
SD2733A motor to suit See page 47
16 11.8 drive, 95 liners, 70 & 85.6 crs
FPLDG-0001 57.5 crank , 13 shaft coarse spline
Use 10095100 Weather caps
Linkage Assembly Wrapover
Arm RH Length Blade Bolt Blade Clip
FPDYG-02 675 8 20, 26
Head
16 11.8
Use with Hepworth pantograph arm P153-28TJ - page 19
Length of arm
-
23
JAPANESE BUS PANTOGRAPH ARMS
Arm Length Main Head Idler Head Bridge Centres Blade Clip
A907-700 700 8-10 taper Pivot block 50 14
A908- 700, 750 10-12 taper Pivot block 50 14
Bus and Coach
Arm Length Main Head Idler Head Bridge Centres Blade Clip
A901 450, 560 10 straight Pivot block 40 6.5
Arm Length Main Head Idler Head Blade bolt Blade Clip
TC881 750, 800, 850 11.8-16 taper 11.8-16 taper 8 20, 25
Bridge cr
60
Chinese Pantograph arm
-
24
SWF PANTOGRAPH ARMS
Bus and Coach
Arm Length Main Head Idler Head Blade Bolt Blade Clip
103.980 700 12 DIN 12 DIN 6 16
Bridge Centres
60
104.580 750 12 DIN 12 DIN 60 6 16
Arm Length Main Head Idler Head Bridge Centres Blade Clip
106.080 710 16 DIN 16 DIN 60 25
107.515 795 16 DIN 16 DIN 60 25
106.671 870 16 DIN 16 DIN 60 25
108.294 970 16 DIN 16 DIN 60 25
Blade Bolt
8
8
8
8
Arm Idler Length Idler Head Pivot Bush
104.173 680 12 DIN 8
Arm Drive Length Main Head Pivot Bush
104.171 680 12 DIN 8
Length of Arm
See page 49 for SWF blades
-
25
SWF RADIAL ARMS
Bus and Coach
Arm RH Length Head Blade Clip
106.293 675 16 DIN 25
Blade Bolt
8
Arm LH Length Head Blade Clip
104.711 700 16 DIN 16 Blade Bolt
6
Arm RH Length Head Blade Clip
104.710 700 16 DIN 16
Blade Bolt
6
Arm LH Length Head Blade Clip
106.294 675 16 DIN 25
Blade Bolt
8
See page 49 for SWF blades
Length of arm
-
26
SWF LINKAGE SYSTEMS
107.137 12 DIN drive, 90 liner, 72.5 cr 12 DIN idler, 90 liner, 40 cr off side 10mm pin 60crs
Spindle Assembly
Liner l
ength
Coach Design Australia
Spindle Idler Coachwork Light Duty
102.665 12 DIN, 100 liner
Spindle Assembly Coachwork Heavy Duty
107.313 16 DIN drive, 90 liner, 71.3 cr 16 DIN idler, 90 liner, 45 cr same side 16mm ball 60crs
Use 10095100 Weather caps
105.585 16 DIN, 80 liner, 85.6 cr same side 12mm pin 105.586 16 DIN, 80 liner, 70 cr same side 12mm pin 106.539 16 DIN, 70 liner, 83 cr same side 12mm pin 106.540 16 DIN, 70 liner, 70 cr same side 12mm pin
Spindle Designline City Bus
Fairfax City Bus
Use 10095100 Weather cap
Spindle Decelerator one piece Designline City Bus
104.596 M26, 60 liner, 12mm pin
Coachwork Light Duty
Spindle Drive
102.666 12 DIN, 130 liner, 72.5 cr off side 10mm pin
B / Pedal Crank Coach Design Australia
Coachwork Light Duty
104.773 48.5-97, 10mm pin, 13 shaft 102.700 40-80, 10mm pin, 9 shaft
Crank Designline City Bus
Fairfax City Bus
104.293 57.5 cr, 12mm pin, 13 shaft
Spindle Decelerator Two piece
105.391 Decelerator, 12mm pin
Fairfax City Bus
B / Pedal Crank Coachwork Heavy Duty
106.711 48.5-97, 16mm ball, 13 shaft
Link Rod Cup Bush
LRC16 16 Dia ball closed end LRC16-O 16 Dia ball open end
Spindle Weather Cap Coachwork Heavy Duty
Designline City Bus
Fairfax City bus
10095100 M26, 16 DIN
Also fits Designline Chinese system
-
27
SWF LINKAGE SYSTEMS
Tie Bar / Link Rod
103.646 Suit 10mm pin, 575mm to 590mm cr-cr, 25mm offset dogleg
Coach Design Australia
Tie Bar / Link Rod
107.317 Suit 16 Dia ball, 583mm cr-cr, closed / closed 107.318 Suit 16 Dia ball, 583mm cr-cr, open / closed
Coachwork Heavy Duty
190.942 Suit 12mm pin, 400mm cr-end
Tie Bar / Link Rod
Fairfax City Bus
Tie Bar / Link Rod
102.819 Suit 10mm pin, 497mm to 513mm cr-cr 102.820 Suit 10mm pin, 615mm to 632mm cr-cr
Coachwork Light Duty
Tie Bar / Link Rod
107.708 Suit 12mm pin, 895 to 915mm cr-cr Fairfax City Bus
Link Rod Spindle Assembly
Designline City Bus
105.584 includes 105.585 spindle connects to 104.293 crank
107.711 Suit 12mm pin, 500510mm cr-cr
Tie Bar / Link Rod
Fairfax City Bus
30mm longer than link in 105.583
15mm shorter than link in 107.711
Designline City Bus
105.583 includes 104.596 Decelerator, and 105.586 spindle connects to 104.293 crank
Link Rod Spindle Assembly
-
28
TRICO RADIAL ARMS
Adjustable Arms
Adjustable to 510mm: Suits straight shaft 8.0mm Knurled driver P/N: 02465 (supplied with arm)
Adjustable to 510mm: Suits straight shaft 6.35mm Knurled driver P/N: A199 (supplied with arm)
Adjustable to 510mm: Suits 8mm DIN taper
Adjustable to 510mm: Suits 16mm Taper knurled driver P/N: 86324J with Clamp down nut.
Note: Adjustable for left or right crank
Lengths 36, 41, 43, 48, 51, 56, 61cm. Knurled driver Part No. 101569 Washer jet Part No. 75400
Note: Adjustable for left or right crank
Lengths from 56cm to 75cm 12 DIN or 16 DIN units available. Available with straight arm. (without crank)
Length of arm
Length of arm
Travelling Washer Jet P/N 75400
Travelling Washer Jet P/N 75400
Suffix P/N With length
eg: 6200036
6mm
Flat Screen Wiper Blades
Standard Lengths Available: 41,51, & 61cm
Standard Lengths Available: 41,51, & 61cm
609 SERIES 36,41,46,51cm Lengths Available
604 SERIES
607 SERIES
63000 SERIES
TCA620
A18380
A17076
A17036
A17035
-
29
TRICO PANTOGRAPH ARMS
DIN Tapered Head
Knurled driver Head
Travelling Washer Jet P/N 75400
Note: Suffix P/N with required length. Eg: 6800066
Travelling Washer Jet P/N 75400
Travelling Washer Jet P/N 75400
Part Number Length (cm) Main Head Idler Head Bridge Centers Blade Clip
66000 51,56, 61,66,71 Collet & Clamp 44 10mm
67000 51,56, 61,66,71 Collet & Clamp 44 14mm
Part Number Length (cm) Main Head Idler Head Bridge Centers Blade Clip
TPA682 10 DIN
TPA952 Collet & Clamp 12 DIN 71cm 60mm 14mm
Part Number Length (cm) Main Head Idler Head Bridge Centers Blade Clip
68000 22mm
68001 14mm
68100 22mm
68101 14mm 16 DIN 16 DIN
12 DIN 12 DIN
66 to 85cm 60mm
Length of arm
Length of arm
Knurled Driver
-
30
Knurled Driver Adapts 6mm straight shaft to 13.7mm spline
A199 6mm
Knurled Driver Adapts flatted shaft To 17.514.5 taper
101569
TRICO SPINDLES
Trico Spindles For Indirect Motor Drive
Liner Length Setting of dimension x fixes the wiping arc
NOTE: Part Numbers must be suffixed with x dimension, as illustrated above. Eg. 0312551
Liner Length Radial Arm (less swivel plate)
Pantograph Arm (with swivel plate)
44mm (1 3/4) 03125 x dim: 46, 51
03131 x dim: 65
75mm (3) 03126 x dim: 42, 61, 63, 65
03132 x dim: 61
100mm (4) 03127 x dim: 46, 51, 61
03133 x dim: 65
95 Lin
er
89.6 102.8
75353-60-89.6 12 DIN drive, 95 liner, 89.6 cr, 14.4 ball 75353-60-102.8 12 DIN drive, 95 liner, 102.8 cr, 14.4 ball
Spindle Assembly 14.4mm ball drive Supplied complete with nuts, washers, Rubber Gaskets, weather caps.
Suit 44mm Arm Centres
03189
Swivel plate Indirect drive
16mm (5/8) dia
Plain 6.3mm Dia swivel
Flatted shaft
Supplied complete with retaining Nut and circlip on drop arm pin. Pantograph pivots are assembled With mounting plate, rubber Gasket and swivel
Knurled Driver Adapts 8mm straight shaft to 13.7mm spline
02465 8mm
-
31
DOGA MARINE SCREEN WIPER SYSTEMS
Model 111
123.1001.GA.06 500
123.1002.GA.06 600
123.1005.GA.06 700
136.1650.BA.06 500
136.1660.GA.06 600
136.1770.GA.06 700
All these arms are provided with tubes and screen washer nozzles.
111.9509.20.16 12 50
111.9509.30.16 24 50
With two reciprocating driving shafts. Starting torque, with wiper motor cold: 25 Nm. This type of motor is supplied with automatic park. All these motors can also be supplied on application with 60, 72, & 80 degree wipe angles
Pantograph Arms To suit 111 motor
60
122
214.5
105.
5 43
46
M18x1
M8 10Dia
55
L
BL
M8
ONE SPEED
55
-
32
DOGA SMALL SCREEN WIPER SYSTEMS
With reciprocating shaft end According to A8 x M6 DIN 72783. Two points fixing, Starting torque, with wiper motor cold: 7 Nm. Normal running torque: 1.4 Nm. Oscillations per minute: 43. All these motors can be supplied on request with 60mm shaft and different wiping angles
Model 113
Part Number Volts Degrees L ( mm ) A ( mm )
113.5573.20.D0 12 110 60 70
113.5573.30.D0 24 110 60 70
113.5523.30.D0 24 110 19 30
113.5473.20.D0 12 90 60 70
113.5473.30.D0 24 90 60 70
113.5423.20.D0 12 90 19 30
113.5423.30.D0 24 90 19 30
113.5323.20.D0 12 80 19 30
113.5223.20.D0 12 60 19 30
113.5223.30.D0 24 60 19 30
Remote Switch & Automatic park
Part Number Volts Degrees L ( mm ) A ( mm )
113.5420.20.00 12 90 19 30
113.5420.30.00 24 90 19 30
Built in switch manual park
57
11
63.
105
35 M
M
8
M14 L 5
5 A
57
L
120.7201.D0.R4 400
120.7203.GA.R4 500
121.0224.GA.04 400
121.0225.GA.D4 450
121.0226.GA.04 500
136.1640.B0.04 400
136.1645.B0.04 450
136.1650.B0.04 500
138.3936.B0.04 360
139.3950.B0.04 500
-
33
DOGA MARINE SCREEN WIPER SYSTEMS
Model 116
With one reciprocating driving shaft, two fixing points and a switch on the cover. Starting torque, with the wiper motor cold: 10 Nm. This type of motor is provided with automatic park.
116.4462.B16E 12 90
116.4464.3B16E 24 90
116.1864.20.16 12 110
116.4864.3016 24 110
120.7204.BA.R6 350
120.7202.BA.R6 450
120.7203.BA.R6 500
121.0224.GA.06 400
121.0910.GA.D6 500
121.0227.GA.06 550
134.1635.BA.06 350
134.1640.BA.06 400
134.1645.BA.06 450
134.1650.BA.06 500
Arms To suit 116 motor
75 29
R 31
104 64.5
50
38
220
89
29.5
31
M8
M16
57
42.5
48 (L
30)
57 L
L
BL 25
-
34
AFI GM WIPER SYSTEMS
Designed by marine companies and manufactured specifically for marine usage. Fully sealed waterproof housing. UV stabilised, high temperature, high impact thermoplastic alloy construction. Anti-rotation drive shaft with std knurled shaft and solid brass arm drive nut. Modern styling, no additional covers needed. Especially good for open cabins with exposed motors. Features
GM1 Motor
Adjustable wipe angle capability Self parking one side Suitable for marine applications factory set for a 110 degree wipe angle that
can be adjusted in minutes to 50, 65, or 80 168 L x 86 W x 51 H Weight 1.75 lbs (800g) Up to 16 x 16 arm / blade combination.
GM2 Motor
Adjustable wipe angle capability Self parking left or right Suitable for marine applications factory set for a 110 degree wipe angle that
can be adjusted in minutes to 45, 60, or 80 197 L x 98 W x 60 H Weight 2.7 lbs (1.2 kg) Up to 24 x 24 arm / blade combination.
07261 355510mm Pendulum
07268 305430mm Pantograph
07263 460610mm Pendulum
07270 430560mm Pantograph
Arms
Part no. Length Type
07290 12 Black
07292 16 Black
07293 18 Black
07294 20 Black
07295 22 Black
07296 24 Black
Blades
Part no. Length Color
GM1-2 1/2 12 37mm
GM1-1 1/2 12 12mm
GM2-2 1/2 12 37mm
GM2-1 1/2 12 12mm
Motors
Part No. Voltage L1-max
-
35
Features
Adjustable wipe angle capability 2 Speed Auto park Suitable for marine applications All Vetus wipers are factory set for a 110 degree wipe angle that can be adjusted to 40, 50, 60,70,80,90, and 100 degrees.
The pantograph wiper arm is supplied with a connection kit and idle spindle as standard, reducing L1 by 3mm. Both wiper blades can be fitted to the twin wiper arm in 2 different positions, so that the wiped surface can be adjusted.
VETUS WIPER SYSTEMS
Top quality marine wipers, which meet all the demands of a boat windscreen wiper. A powerful motor and a separate housing with worm wheel transmission. Extremely quite in operation. Highly suitable for all kinds of boats. Attractive plastic cover available for exposed mountings. Vetus wiper arms are made entirely of Stainless steel (AISI 316).
SSAS 280366mm Pendulum
SSAL 395481mm Pendulum
SSAX 473559mm Pendulum
SSAD 308393mm Pantograph
SSADX 386471mm Pantograph
Arms
Part no. Length Type
WBB30 305mm Black
WBB41 410mm Black
WBB51 510mm Black
Blades
Part no. Length Color
194
65
16
54
L1
102
Installation of the plastic cover reduces L1 by 3mm.
Shown without bottom plate
RW08S 12 25mm
RW09S 24 25mm
RW01S 12 51mm
RW02S 24 51mm
RWCG
Motors
Part No. Voltage L1
Plastic Motor Cover
-
36
Features Adjustable wipe angle capability 2 Speed Auto park, left or right side Suitable for marine applications All Roca wipers are factory set for a 45 degree wipe angle that can be adjusted in minutes up to 110 degrees.
ROCA WIPER SYSTEMS
The new designed Roca Waterproof system is marine quality, consequently ideal for any type of service. Variable sweep adjustment can be easily made after the windshield wiper is mounted, for best fit to your windshield. Insulated ground which makes it also suitable on metal boats. Fully sealed waterproof housing made of UV stabilised thermo plastic in a compact size. Easy adjustment for self park on left or right side
Specifications Voltage - 12, 24 Weight - approx. 1.6 kg Torque - 10Nm Two Speeds - slow 35 rpm - fast 55 rpm
173mm 13.8mm
10.5
mm
13.8
dia
102m
m
C/C mounting hole 146mm
L1
65mm
46m
m
P = Parking S = Slow F = Fast G = Ground
Fuse
Fuse
Battery Battery
Switch Circuit
L2
P S F
530011 12 16mm
530012 24 16mm
530021 12 42mm
530022 24 42mm
Motors
Part No. Voltage L1-max
538617 310440mm Pendulum
539818 340470mm Pantograph
538624 480610mm Pendulum
539824 480610mm Pantograph
Arms
Part no. Length Type
521114 14 Black
520916 16 Black
520520 20 Black
520522 22 Black
Blades
Part no. Length Color
-
37
ROCA + MITSUBA STYLE SMALL SYSTEMS
With automatic stopper, 2 terminal, and manual switch. With reciprocating shaft end 6mm diameter, thread 8.8mm diameter. Easily shortened shaft to suit thin mounting surfaces. Sweep angle 110 degrees. Marine quality version with Stainless Steel shaft available, 3 terminal, no switch.
CL3016 12 No
CL3010 12 Yes
CL3013 24 Yes
CL3012 12 Yes
CL3015 24 Yes
65mm
50mm
50mm
105mm
105mm
Motors
Part No. Voltage Switch
L1
Marine Motor, Arm, and Blade Kit Motor with white powder coated aluminium cover, Stainless Steel shaft, and mounting plate. Adjustable sweep angle 90 or 110 degrees. Adjustable left or right self parking. 3 terminal, no switch. Black coated stainless steel arm easily adjustable from 280mm to 360mm, polymer wiper blade 280mm.
Roca
Mitsuba Style
See page 50 for arm and blades to suit
110
90
Adjust sweep Adjust park left to right
280 to 360
82
6 Dia
9 Dia 56
5.5
82
280
521011 12 62mm
521012 24 62mm
Part No. Voltage L1
L1
-
38
UNITED TECHNOLOGIES WWJ WIPER SYSTEMS
Pantograph Adaptor kits
Black Arms and Blades
Kit Number Center Distance
Used with Pivot Shaft
KT48519 31.8mm .668 Heavy duty Black
Radial arm With wet kit
Pantograph Wiper arm
50mm max
33.5mm max
87.4mm
Kit Number Description
5219140 Wet Kit includes: hose, nozzle & clips for wet arm application
Stall Torque 34 Nm Voltage 12, 24 Stall Current 20 amps no load 1.5 amps Low speed approx 36 rpm High speed approx 60 rpm
Specifications
High efficiency rotating output shaft Heavy Duty but Light weight; 1.37 kg Stall Torque 34 Nm Adjustable Park 2 Speeds Ball bearings, for greater efficiency & smooth operation Ideal trico Air motor replacement. Same flatted shaft &
18mm DIN taper block
Features
Model WWJ
Radial Arm Length
5217440 356mm
5217540 406mm
5217640 457mm
5217740 508mm
5217840 559mm
5217940 610mm
5218040 660mm
Pantograph Arm Length
5218340 356mm
5218440 406mm
5218540 457mm
5218640 508mm
5218740 559mm
5218840 610mm
5191740 711mm
Blade Length
5216940 357mm
5217040 406mm
5217140 457mm
5217240 508mm
5191640 559mm
For Bosch Blades up to 700mm See page 20
-
39
UNITED TECHNOLOGIES WWJ WIPER SYSTEMS
Model WWJ
To secure to shaft, tighten to a torque of 180200 in. lbs
Drive Arm
Although this heavy duty system is of unitised design, the major components must be ordered individually to permit the most suitable choice of operation voltages, wipe angles, and pivot shaft lengths. When ordering a wiper kit for a unitised installation, three numbers are necessary. 1. Motor Kit Number 2. Drive Arm Number 3. Pivot Shaft Number
Adjustable Drive Arm
2. Drive Arm
Includes all parts required to make Complete assembly except No.s 2 & 3 (inc: motor, bracket, connecting link, Nuts & bolts
1. Motor kit Part number Voltage
6577520 12
6577620 24
Part number Wipe angle
68
6211140 85
108
93
6211240 127
Part number Wipe angle
LE6000 10 to 80
3. Pivot Shaft Part number Length Description
6271540 25mm
6271140 32mm
6271240 51mm
6271440 76mm
Heavy Duty,
.628 Shaft
A B C
Pin Positions
Shaft Diameter
Shaft Length
Part number Length
LK721014 86mm
LK7210355 483mm
LK721026A 504mm
LK7210357 699mm
LK7210358 572mm
6211340 replaces 6211140
6211440 replaces 6211240
Double Link Drive Arms
Dual Arm Link Assemblies
68 85 108
93 127
-
40
246075015001 12v gear driven 246075010001 24v gear driven
Pump Bulkhead Mount
PUMPS AND WINDOW WASHER EQUIPMENT
Pump Bottle Mount
15029800 12v 15029900 24v
Washer kit 1.45 litre Reservoir, 12v PVC tubing, wiring, T piece
Pump Bulkhead Mount
CL209M 12v light Duty CL209N 24v light Duty
Pump Bulkhead Mount
15011800 24v
Washer kit 1.7 litre Reservoir, 12v PVC tubing, wiring, T piece
W5000
15057500 1 pump 24 volt 15057700 2 pump 24 volt 15057400 1 pump 12 volt 15057600 2 pump 12 volt
Washer Bottle Doga Large Capacity 5 litre Reservoir
Washer Bag kit 12v with mounting bracket, tube, T piece, wash jets, wiring, switch
EWP16
Pump Bottle Mount
CL508M12V 12v CL508N24V 24v
Fits bottles W5000 W5010
17.3
Washer kit 3 litre Reservoir, 12v
531161
Washer kit 1 litre Reservoir 12v PVC tubing, wiring, T piece mounting bracket, jets
19WWK W5010
201.0002.20.00 12v 201.0002.30.00 24v
Fits bottles 15057500 15057700 15057400 15057600
17
103.765 Bottle, 1 pump 24v 105.070 Bottle kit, 1 pump 24v with 2 x 15030600 jets, 2 x 10050263900 connectors, + hose
Washer Bottle SWF Large Capacity 3.2 Litre Reservoir
FPWYG-L Bottle, 1 pump 24v
Washer Bottle Feipeng Large Capacity 3.5 litre Reservoir
Pump Bottle mount
-
41
PUMPS AND WINDOW WASHER EQUIPMENT
Twin Spray Head
15030600: head fit
Solenoid Valve For use with ships own pressurised supply
346-4514-015-12 12 volt 346-4514-015-24 24 volt
75400 with 1m tubing, Trico Arms
Twin Spray Head
Washer Jet Tube
80200400 / metre 3mm ID 80200500 / metre 4mm ID
Twin Spray nozzle
121.5005.39.C0 WP12 Chrome on brass WP7 plastic with nut
Twin Spray nozzle Twin Spray nozzle
Bulkhead connectors 60250401 10mm 60250402 30mm 60250403 42mm 60250405 82mm
15000500 Tee 12937 Straight
Tube connector
15001400 in line
Non - Return Valve Bulkhead connector
10050263900 90 degree
Tube connector
Solenoid 3/16 Tail Barbs
2090808 1/8 BSP
Twin Spray Head
80201001: channel fit
Twin Spray Head
80200100: bracket fit
Triple Spray Head
120.5007.39.CO: 10 x 4 bar fit
Solenoid Valve For use with ships own pressurised supply
433839 12 volt 134237 24 volt 1/8 BSP inlet, 1/8 BSP outlet
0-10 Bar 0.8-10 Bar
2090404 1/4 BSP
29999 9x3 bar fit
Twin Spray nozzle
-
42
CONTROL SWITCHES AND ACCESSORIES
Heavy Duty Wiper Switches Variable Intermittent Wipe Conform to SAE standards J112a for Windshield Wipers and J234 for Windshield Washers
75600-04 12 volt 75602-04 24 volt 10166600 24 volt Heavy Duty suit 50 & 80Nm 90087010 24 volt Heavy Duty with face plate
For 12 volt and 24 volt D.C. electrical systems as noted. Negative ground only 4 positions: OFF/PARK, INTERMITTENT, LOW, HIGH. Push knob to actuate washer pump circuit one to three wipes provided after knob is released. Black plastic knob with metal insert and set screw, white imprint. Die cast case 2 7/32 (56.35mm) square, 1 13/16 (46.04mm) long. Mounting stem 7/16 28 thread, 0.45 (11.43mm) long.
ON Long - Delay
VariableIntermittentWipe
ON - ShortDelay
Low Speed
High Speed
Single Motor Control
CT41DBHITA 12 - 24 volt D.C.
Multi-Function Wiper Switch Dual voltage for DC 12v and 24v systems Three intermittent settings 2 speed functioning Perfect self parking dynamic brake Wash / Wipe program Dimmer input
Single motor control
Push to Wash feature to actuate washer pump
without Wash feature
Heavy Duty Wiper Switches Two Speed
75228-03 12 / 24 volt Six blade terminals
3 positions: OFF, PARK, LOW, HIGH. Sealed construction including an O ring on the shaft Die cast case 1 5/8 (41.28mm) dia 7/8 (22.22mm) long.
Single Motor Control
Heavy Duty Wiper Switches Two Speed
3 positions: OFF, PARK, LOW, HIGH. Sealed construction including an O ring on the shaft Die cast case 1 5/8 (41.28mm) dia 7/8 (22.22mm) long.
75228-04 12 / 24 volt Five blade terminals
Single Motor Control
A Standard Rocker Size Switch, the Multi-Function Wiper Switch has all the functions of our Standard Rotary Switch
10095400 Face plate
For use with motors with Dynamic parking eg Bosch, SWF, Doga
-
43
Heavy Duty Wiper Switches Two Speed
Push to Wash feature to actuate washer pump
75221-09 12 / 24 volt Five blade terminals
3 positions: OFF, PARK, LOW, HIGH. Sealed construction including an O ring on the shaft. Plated steel case 1 3/8 (34.93mm) diameter, 1 3/8 (22.22mm) long. Internal six amp circuit breaker.
Single Motor Control
Heavy Duty Marine Switch For 6 36 volt, D.C. electrical systems Brass case, mounting stem, terminals and mounting hardware Mounting stem 3/8 32 thread, 1 (31.75mm) long Mount in panels to (19.05mm) thick.
M-628
If two or three wiper motors are installed, this control panel enables some, or all of the wipers to operate synchronously at normal speed. At high speed each wiper will retain its own wiping pattern. An interval wipe feature, with three different settings and a wash / wipe function are also built in. The panel is suitable for 12 and 24 volt installations and for wiper motors with a power consumption up to 10A maximum each. Dimensions: 94 x 94 x 15mm high, with a built in depth of 30mm.
Control Panel
CONTROL SWITCHES AND ACCESSORIES
For use with motors without Dynamic parking eg Roca, AFI, Vetus, United Tech
RW PANEL
Wiper Switch Two Speed
HDMSW 12 / 24 volt Four blade terminals
3 positions: OFF, PARK, LOW, HIGH. Plastic case 30 x 30 x 23mm long
Single Motor Control
Wiper Switch Carling Rocker One or Two speed
SW-NF/DP momentary on/off SW-ON/OF/DP on/off SW-N/F/N/ DP on/off/on ACT-WP actuator - wiper ACT-WH actuator - washer
Use with change over relay for Bosch type motors to park
Single Motor Control
-
44
CONTROL PANELS AND ACCESSORIES
Each element of the control panel undergoes extensive testing and measurement to comply with EMC regulations, guaranteeing that they do not cause electrical interference to neighbouring equipment.
CT13 3 wiper controller CT14 4 wiper controller CT15 5 wiper controller
Solve your windscreen problems in a very easy way Coordinate the wiper movements synchronising brushes,
having the same harmonious effect you get in cars. Drive all together ( General ON/OFF ) or one ( Single ON/
OFF for each wiper ) Automatic washing program. Versions from 35 wipers in a single electronic unit, 12 or 24 volt. Fit for any kind of motors. Motors are driven by a relay box
connected to the electronic unit by a simple multipole cable. A robust polyester front mounted on a 3mm aluminium protects the unit from water sprinkle and dust.
Synchronised Control Panel variable intermittent
Network Control System 3000 Series Controller
Individual or group control of the wipers Fast & slow speed operation Intermittent mode with 3 delay timings Heater control switch Wash wipe / air purge facility gives synchronisation of wipe,
water delivery and line purging Synchronised group wiping in the intermittent mode Network uses 2-wire control technology 24 volt Different electrical supplies and voltages can be controlled
in the same system Modules can be located adjacent to the wipers to minimise
wiring runs Network can be run in an open or closed ring circuit
WC-3000-3 3 wiper controller WC-3000-4 4 wiper controller WC-3000-5 5 wiper controller
The series 3000 Network Control System is modular which gives you the flexibility to manage a fully functional window wiper system with integral wash and air purge. The system also controls wiper and window heaters
Module shown on hepworth motor
CT23 3 wiper controller 2 Spd CT24 4 wiper controller 2 Spd CT25 5 wiper controller 2 Spd
-
45
6100 Series 115v AC and 230v AC 1 Phase Motor Modules
Ships power supply 115v AC or 230v AC single phase Straight Line Wipers Type C / D and Clear View Screens Type C350 Motor types GA65, GA65-L, GA64, GA64-L
The standard module is configured as a single motor module with two additional outputs e.g. wash/purge, wash/heat. The extended motor module has four additional outputs (extra PCB). The additional outputs (extra PCB) can be of different voltage to the standard PCB. It is also possible to choose a module as an auxiliary controller. For example as a separate air/purge module or window heater module with either 3 or 5 out-puts. (the heater output is 8 amps; if the current is higher an external contactor is required)
6200 Series 24v DC Motor Modules
Ships power supply 24v DC Pantograph, Pendulum, or Straight Line Wipers Motor types 30Nm, 50Nm, 80Nm, 110Nm, 1800 and 1801 (pend & panto, two speed), PM3 and PM5 (slw single speed)
The standard module has two outputs; 1 Motor Control output 2 One extra hardware (dipswitches) output configurable for wash/purge/wiper heater/window heater. (the heater output is 4 amps; if the current is higher an external contactor is required)
6300 Series 115v AC and 230v AC 3 Phase Motor Modules
Ships power supply 115v AC or 230v AC three phase Straight Line Wipers Type C / D and Clear View Screens Type C350 Motor types GA61, GA61-IP-23, GA63, GA62D, GA68 Pantograph / Pendulum Wipers 70Nm and 100Nm
The standard module has one output, motor control, only. The extended module has two extra outputs (extraPCB). (the heater output is 8 amps; if the current is higher an external contactor is required)
Flexibility
Large bridges can be divided into zones, each of which may be configured Into groups. Different electrical supplies and voltages can be controlled in The same system, and additional wipers and equipment can be added at a Later date with no complicated design change. The series 6000 Control System consists of modules that may be distributed Around the bridge in close proximity to each wiper. A single power cable to The module can provide a wiper, wash and air purge, or wiper, wash and heat Functionality. For large systems requiring multiple functions, a separate wash/purge/screen heat module is available. The system is controlled from a conveniently positioned control keypad, Available as Single Speed or Two Speed, Master group control, 1 to 5 groups All groups Single wipe, 3 intermittent wipes, wash, case heat, and window heat
CONTROL PANELS AND ACCESSORIES
6500 Series Control Panels
The system can be controlled with a rotary switch, Carling rocker switch, touch screen, the std 6500 keypad or a customised keypad.
Available with a maximum of two slave controllers per master and remote switches per controller.
Network Control System 6000 Series Controller
Simple control of large systems More than one keypanel can be integrated into any operational system Wipers controlled locally or from master control Different types of wipers with variations in voltage controlled by one system Synchronization of low voltage wipers, (pantograph / pendulum) in low and high speeds Reduced installation costs
-
46
ASSORTED MOTORS
Bosch 80Nm
101149/1 24 volt, 2 speed + park 13.26 shaft
Bosch 30Nm
65008900 24 volt, 2 speed + park, IER M8 10 taper shaft,
Bosch 50Nm
65008600 24 volt, 2 speed + park, IER 9.3 shaft
65008800 12 volt, 2 speed + park, IER 9.3 shaft,
65008500 12 volt, 2 speed + park, IER M8, 10-12 taper shaft, 3 x M6 mnt
100714/2 12 volt, 2 speed + park, IER 13.26 shaft, 3 x M8 mount
62.5
100865/1 24 volt, 2 speed + park 9.3 shaft
62.5
44
Doga 50Nm
119.3723.30.00 24 volt, 2 speed + park 9.3 shaft, 3 x M6mount
Doga 130Nm
259.3705.3B.04 24 volt, 2 speed + park 13.26 shaft, 3 x M8 mount
62.5
111.3717.20.00 12 volt, 2 speed + park
111.3717.30.00 24 volt, 2 speed + park
9.3 shaft, 3 x M6 mount
62.5
Doga 25Nm
44
SWF 50Nm
403.873 24 volt, 2 speed + park 9.3 shaft, 3 x M6 mount
SWF 65Nm
403.195 24 volt, 2 speed + park 13.26 shaft, 3 x M8 mount
62.5 62.5
100726/1 100726/2 IER 24 volt, 2 speed + park, 15.8 shaft, 3 x M10 mount
Bosch 110Nm
78
259.3705.2B.04 12 volt, 2 speed + park
699397236020 Kenworth long nose 12 volt, 2 speed + park, M8-10 taper shaft, 3 x M6 mount
100712/2 24 volt, 2 speed + park, IER 13.26 shaft
-
47
ASSORTED MOTORS
Feipeng 125W
61
SD2733A 24 volt, 2 speed + park 13.26 shaft 3 x M8 mount
Designline coarse spline
Prestlite
3262249-R91 12 volt, With bracket and crank
Suit International S Line
United Technologies / AM
6577520 12 volt, 2 speed + park
6577620 24 volt, 2 speed + park Taper shaft, With bracket
41.5
Bosch 2Nm
69
101250-6 12 volt, 1 speed + park, IER 101250-7 24 volt, 1 speed + park, IER M6 8 taper shaft
VALEO (SWF)
Voltage Overall spindle length Liner diameter (A) Spindle diameter (A) Liner diameter (B) Spindle diameter (B) Thread (A&B) Spindle crcr Sweep Angle Box width Box height 107.862 Park to Left 107.854 Park to Right
24v 107mm 20mm 12mm 16mm 10mm M8 60mm 75 degrees 95mm 190mm (RHS) (LHS)
Use with SWF 103.980 Arm 700mm 130.600 Blade 600mm 130.701 Blade 700mm
A B
107m
m
Asmo / Denso
859100-6142 Hino RH, 5 pin 859100-6132 Hino LH, 5 pin 849100-0964 Mitsi RH, 6 pin 849100-0973 Mitsi LH, 5 pin M8-12 taper shaft, 3 x M8 mount
For Japanese Coaches with linking cable between motors. Self park through RH motor
Parvalux With drive for Hepworth / Wynn Straightline systems
AC 100, 115, 230 volt DC 24 volt Indent only call for details
70
-
48
BLADES BOSCH
Blade Length Bolt Diameter Blade Block
B140-14, 16, 18, 20, 22 340, 400, 450, 500, 550 4.8 14
Blade Length Bolt Diameter Blade Clip
B140-24, 26, 28 600, 650, 700 4.8 14
Blade Length Bolt Diameter Blade Clip
B140-32, 36, 39 800, 900, 1000 6 20, 21, 25, 26
Bosch Heavy duty, curved screen wiper blades are built to withstand heavy commercial and marine usage and are available in a range of sizes up to 1000mm. Renowned Bosch Quality translates into superb wiper performance throughout an extended service life. Bosch windshield wipers rely on innovative technology for maximum visibility and optimal safety. Note: When ordering, suffix Part number with length required in inches. e.g. B140-39
Curved Screen Wiper Blades
80012800 Blade Block
Flat Screen Wiper Blades
Blade Length Blade Clip
1688-001- 450, 500, 550, 600, 650, 700 Saddle for Wynn straight-line arm
Nom. Blade Length
25 & 26mm Spacer with 8mm clip bolt adaptor
-
49
BLADES SWF
Blade Length Bolt Diameter Blade Block
130.600 600 6 16
130.701 700 6 16
Blade Length Bolt Diameter Blade Clip
130.801 800 6 15,16,26
Blade Length Bolt Diameter Blade Clip
106.277 1000 8 20,26
SWF Heavy duty, curved screen wiper blades are built to withstand heavy commercial usage and are available in a range of sizes up to 1000mm.
Curved Screen Wiper Blades
Refills Refill Brand Back Length Claw Width
TRP1000 Trico / Tru Vision Plastic 1000mm 8mm & 9.5mm
TTR40 Tridon Plastic 1016mm 8mm & 12mm
TMK28 Tridon Plastic 710mm 7.5mm
MRS28 Tridon Metal snap off 710mm 7.5mm
69BMN610 Bosch Metal snap off 610mm 6mm
80262200 Bosch Rubber only 1000mm 9.5mm
80262201 Bosch Rubber only 900mm 9.5mm
80262202 Bosch Rubber only 800mm 9.5mm
115.756 SWF Rubber only 800mm 7.5mm
9mm x 4mm & 12mm x 4mm Hook adaptors
16mm Blade block
Spacer with 8mm clip bolt
adaptor
-
50
CLASSIC CAR SMALL ARMS / BLADES
Curved Blade 6mm Bayonet fit 10 & 11 Stainless Steel
SSWB10 SSWB11
TE10310 TE10312
Curved Blade 5mm Spoon fit 10 & 12 Stainless Steel
Left crank shown
Mini Arm 6 x 2mm Bayonet end, 11 Stainless Steel Fits Std 13.6mm straight spline, Right or Left crank
SSWA11L SSWA11R
21-304
Adjustable Arm Slotted end for Hook blade, Fits 6mm straight shaft Adjustable 240380mm
Curved Blade 7mm Bayonet fit 10 & 12 Stainless Steel
SSWB10-7 SSWB12-7
21-303 255mm 21-305 350mm
Flat Blade Hook fit
Knurled Driver Adapts 6 or 8mm straight shaft to 13.6mm spline
A199 6mm 02465 8mm
Universal Adjustable arm 5mm Spoon & Bayonet fit, left or right crank, Adjustable to 360mm Fits Std 13.6mm straight spline Comes with adaptor for 6mm straight shaft
TC203
Simply cut off unwanted end A199 Knurled Driver
Flat Blade 6mm Bayonet fit 10 Stainless Steel
SS10FBN SS10FSP
Flat Blade 5mm Spoon fit 10 Stainless Steel
Universal Adjustable arm 7mm Bayonet fit, left or right crank, Adjustable to 380mm Fits Std 16mm straight spline
Simply cut off unwanted end
TC202
TE266-12 TE266-14
Curved Blade 5mm Bayonet fit 12 & 14 Stainless Steel
-
51
GENERAL
As we have no influence on the installation of complete windscreen wiper systems, we are unable to accept liability for installation errors.
The composition and installation of freely selected wiper systems lie within the sole responsibility of the customer. We are therefore unable to accept liability.
Most wiper systems have a park setting, which permits them to operate in the parked position if connected to the vessels electrical system, even if the wiper is switched off. For this reason, at this point in time, neither may the wiper arm be mounted, nor may any person have hands, fingers etc anywhere near the wiper system. Even small wiper systems can neither be braked nor stopped by hand.
Never reach into the area of the rod linkage when the system is running!
NOTE: Pantograph arms can be either RIGHT HAND or LEFT HAND. To change an arm set to the opposite hand, rotate the slave arm over the top of the main arm as illustrated.
When putting into service (ie. when connecting the wiper motor to the vessels electrical system, even if the wiper switch is in the 0 position), never leave any loose items such as screwdrivers in the area of the wiper system, as flying objects could lead to injury. When planning a system, make sure there are no obstructing elements (such as water tanks, ventilation pipes, blowers, etc.) located where you wish to install the motor, linkages, spindles. The wiper spindles must be fixed to the bulkhead, ensuring sufficient rigidity at the mounting point. If necessary, the cab wall may require appropriate reinforcement. Mount wiper arms in the hinged-up position.
-
52
Screen Wipers Ltd 2L Edinburgh St, Penrose, Auckland, 1061
Email: [email protected] Fax: (09) 634 9038 Ph: (09) 634 9035