catalogue 2020 marine tools & accessories · 2020. 3. 9. · dfi/volvo edc requires power cable...
TRANSCRIPT
-
Catalogue 2021
2021 CatalogMarine Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
Version release 10 March 2021 10:10
-
3
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
2
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
iDS2 Intelligent Diagnostic System Part No. 1015-100REQUIRED: USB Cable, Serial cable, Transport case
Scanworld System US, Inc. Scanworld System US, Inc. offers five unique diagnostic software programs using one hardware system to meet all your diagnostic needs. NO Annual Fee!Software does NOT expire!UNLIMITED FREE software updates!With easy to follow step-by-step set up and instructions, Scanworld Systems will have you diagnosing quickly and hassle-free. And you can choose from 8 different languages to work in.Features individual tool assembling, choose only the items you need to get your job done. Purchase additional tools when you need them.Works on any computer, laptop, or tablet with a USB port and Windows operating system.
DIagnoStIc SyStem
SoftwareS
Scan-Sea, Personal WatercraftPart No. 1015-150
Scan-Marine, Inboard/Outboard MotorsPart No. 1015-155
Scan-Land, ATVPart No. 1015-160
Scan-Bike, MotorcyclePart No. 1015-165
Scan-Snow, SnowmobilesPart No. 1015-170
The iDS Intelligent Diagnosic System requires at least one software application.You may purchase multiple software applications at a considerable discount!
Power cableS
Power CablePart No. 1015-200PWC, Marine, Snow
Polaris Power CablePart No. 1015-205Snow
NOTE: The Key Programming Systems are not stand-alone items, they require the iDS2, Part No. 1015-100
Part No. 1015-105 Part No. 1015-110
Part No. 1015-115
Key ProgrammIng SyStem
Sea-Doo
yamaha
Kawasaki
-
5
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
4
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
oUtboarD DIagnoStIc cableS
Volvo / Penta D3 / D4 / D6Part No.1015-340
Volvo EGCPart No.1015-335
Johnson / Evinrude 75 - 250 Hp FICHT 97-06Part No.1015-235
IndmarPart No.1015-245
MercuryPart No.1015-265
Mercury Optimax DFIPart No.1015-275DFI/Volvo EDC Requires Power Cable
Mercury Denso (up to 98)Part No.1015-270
SteyrPart No.1015-310
Nissan / Tohatsu 25 / 30 HpPart No.1015-330
Suzuki (Square)Part No.1015-325
Suzuki (Round)Part No.1015-320
Johnson / Evinrude 15 - 300 Hp E-Tec 04-17Part No.1015-230
InboarD DIagnoStIc cableS
Pwc DIagnoStIc cableS
Volvo / PentaEDC1/ KAD44 / 300Part No.1015-345DFI/Volvo EDC Requires Power Cable
VW-MarinePart No.1015-355
Yanmar Diesel (4BY150 / 180 /6YB260)Part No.1015-370
Yamaha CAN-BUSPart No.1015-360
Volvo Gas Engine ( MEFI )Part No.1015-350
Kawasaki 2-StrokePart No.1015-255
Kawasaki 300Part No.1015-260
Polaris 2-Stroke (A)Part No.1015-295Kawasaki/Polaris 2-Stroke Requires Power Cable
Polaris 2-Stroke (B)Part No.1015-300Kawasaki/Polaris 2-Stroke Requires Power Cable
Polaris 4-StrokePart No.1015-305
-
7
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
6
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
SnwmobIle DIagnoStIc cableS
mUltI-aPPlIcatIon DIagnoStIc cableS
Ski-Doo***Part No.1015-220Please Check BRP Power Connector Chart
Ski-Doo Carb ModelsPart No.1015-225
Can-Am / Sea-Doo 4-Tec / DIPart No.1015-210ATV, Bike, PWC
Sea-Doo D.E.S.S. 2-Stroke Carb ModelsPart No.1015-215PWC, Snow
HondaPart No.1015-240Bike,Marine, PWC
Kawasaki 4-StrokePart No.1015-250ATV, Bike, PWC
Polaris CAN-BUSPart No.1015-285ATV, Snow
Suzuki ATVPart No.1015-315ATV, Bike
YamahaPart No.1015-365Marine,PWC,
Polaris MSEPart No.1015-290ATV, Snow
tImIng & IgnItIon
Self-Powered Inductive Clamp Timing LightPart No. 996-175 Four foot lead. Works with Magneto Ignition Systems. Accurate up to at least 10,000 RPM. Brilliant flash at all speeds. For 2 and 4 cycle engines. All ignition systems. Self powered by 2 “D” cell batteries. Ideal for field, shop, motorcycle, marine and stationary engines. Protective sleeve withstands high temperaturre (1200 degrees). One year warranty.
Optical Sensor TesterPart No. 511-4017 *Used to test V4/V6 Optical Sensor on the Engine or Bench *Sounds an Audible Alert when when setting the ignition timing, to allow an optional Eyes Free OperationReplaces 434017 OIS 200 Sensor Tester
Breakout Box Part No. 511-9756 Ideal for testing Johnson and Evinrude ignition Systems while cranking engine.
Trigger TesterPart No. 511-9710 Ideal For: Mercury/Marine, Chry/Force Johnson/Evinrude V6 with Quick Start Timmer Bases (1988-& Newer) & Johnson/Evinrude With OIS Ignitions, EFI
Mercury CDM Module Test HarnessPart No. 511-5207A 1 *Unique design allows you to break the kill circuit without cutting the wire*Allows testing of DVA voltages from the stator and trigger while connected to the CDM Module*Can be used to bench test CDM Modules as well
Pack Load ResistorPart No. 511-9775Use to replace ignition coil for testing DVA output from ignition pack when looking for a defective coil, Replaces: PL88.
3cyl optical sensor testerPart No. 511-4019 Unique 3 Cyl. Optical Sensor Tester used to test 3 Cyl. Optical sensor on engine or bench, Eliminates the guesswork involved in testing trigger sensor
6cyl Optical Test Harness Part No. 511-4127Test harness allows you to check the DVA voltages of the stator while connected to the power pack.
4cyl Optical Test HarnessPart No. 511-7270Test harness allows you to check the DVA voltages of the stator while connected to the power pack, Used on 1994-2006 (90 & 115HP) Carbureted Johnson/Evinrude Engines.
-
9
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
8
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
SParK teSterS
open Spark testersHandy tester for hot DC sparks. Presence of spark is a logical first test in ignition troubleshooting. Intensity is next, determined by adjusting the gap. The cutout behind this gap prevents carbon tracking, which will cause a weak spark to look good on other testers. All four points adjust by sliding the spark plate which is calibrated for 1/4, 3/8, 7/16 and 1/2 inch gaps. Plug in connectors for positive contact with spark plug wires plus protection from accidental grounding.
Adjustable Neon IndicatorPart No. 511-9766 Sealed 8 cyl. Adjustable Spark Gap Tester. Has heavy duty wire for mounting in any position. Helps reduce possibility of igniting gas fumes. Optional extension wires available. 4 pc.
7” Extension WiresPart No. 511-9902 For use with 511-9902 (set of 4)
24” Extension WiresPart No. 511-9903 For use with 511-9766 (set of 4)
Part No. 996-100 (4 wire)
Part No. 996-102 (8 wire)
Part No. 996-101-01Leads for 996-101
SwItcheS & aDaPterS
Smarttach PlusPart No. 996-160 A wireless tachometer and spark analyzer. To read RPM simply hold unit near engine. The Smart Tach works by sensing radio transmissions from the engine’s ignition system and analyzing these signals with a powerful microprocessor to display the RPM digitally on its liquid crystal display screen. To check the voltage in each spark plug wire simply hook each spark wire in turn using the sensor hook on the end of the antenna. Read the kilovolts on the display. No wire - no clips - no connections. A real time saver.
Harness, Adapts Gc-96: Johnson / EvinrudePart No. 996-126
Piercing Probe SetPart No. 511-9770*Fully insulated probes with spring loaded clamp*Probes with stainless steel pin self-centers & punctures insulation*Includes 1 Red & 1 Black Probe
Remote DVA Test HarnessPart No. 511-9776
Alligator Test ClipsPart No. 511-CF72
Battery CD TesterPart No. 511-9701
-
11
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
10
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
DC Ampmeter AdapterPart No. 511-9772 Measures starter draw and charging system. Recommended for use with digital multime-ters. Range 1 to 400 amps as 1 millivolt to .4 volts. Extension harness available (511-9788E)
Remote Starter SwitchPart No. 511-6996 Controls most OMC engines from 1969-2000. Unit replaces boat controls at the engine so you can quickly determine if the boat harness is a source of trouble.
Remote Starter SwitchPart No. 511-7950Mercruiser Remote StarterCompatible with most 2006 & Older Mercruis-er engines, Replaces boat side harness at the engine
Remote Starter SwitchPart No. 511-7900 Controls most Mercury engines from 1979-2000. Unit replaces boat controls at the engine so you can quickly deter-mine if the boat harness is a source of trouble.
Remote Starter SwitchPart No. 996-125
Remote StarterPart No. 511-78004 & 6 CylinderCompatible With 1978 & older Mercury Engines
remote Starter SwItcheS
Metric Feeler GaugePart No. 990-230
Spark Plug Gap GaugePart No. 990-345
Nut & Bolt GaugePart No. PPBG-2467
6" Digital Caliper With CasePart No. 996-183
gaUgeS
DIgItal calIPerS
temPeratUre gUnS
Temperature GunPart No. 996-181 Troubleshoot engines including ignition system problems and fuel/air adjustments. Diagnose cooling systems, thermostats and coolant sensors; radiators, brakes and tires. Balance room temperatures on your HVAC by monitoring supply and return registers. Check furnace performance, perform energy audits and check window installations. Check for electrical hot spots, find defective transformers and detect loose electrical connections. Temperature range - 18 to 260 C (0 to 500 F). Works with alkaline 9V or rechargeable Ni-Cad.
Temperature GunPart No. 511-0300 Infrared Temperature Meter Bright laser beam provides targeting, 500 ms Response Time. Easily Switch from C to F range Low Battery Indicator Min and max recoarding of tempera-ture. Automatic sleep mode after 8 sec. extends battery life
-
13
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
12
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
meaSUrement toolS
Ratio Rite CupPart No. 394061 Precision Measuring Cup
Torque Angle GuagePart No. 985-165 Use this mechanical gauge with a 1/2” drive to install various engineering fasteners that require specified angle application after a pre-torque load has been applied. Tool is calibrated to 5” increments with a rotating pointer. Unique mechanism holds the gauge in position during use. Storage pouch included.
PUllerS
amPhenol toolS
Non-Adjustable Neon IndicatorPart No. 511-9764 Sealed 1 cyl. in-line Neon Spark Gap tester. Sealed design reduces possibility of igniting gas fumes.Detachable grounding clamp.
Spark Plug PullerPart No. 551-9765
Ignition Wire PullerPart No. 996-190 Non-metallic. No shock.
amphenol toolsFor Marine Connectors, starter motors, ignition systems, instrumentation controls, etc. For series 44 contacts, 18 gauge wire.
PART NO. DESCRIPTION553-2697 Contact Insertion Tool553-2698 Pin Contact Removal Tool553-2699 Socket Contact Removal Tool
Amphenol Tools Kit553-2700 Kit (See Contents Below)
Kit Contains553-2697 Contact Insertion Tool553-2698 Pin Contact Removal Tool553-2699 Socket Contact Removal Tool
PlIerS
Retaining Ring Pliers Part No. 331045 12 1/2” LONG. internal snap ring pliers ideal for removing large snap rings for outdrives, etc.
4 Piece Snap Ring Plier SetPart No. 990-105 Fits: 10-50mm / 3/8"- 2"
hanD toolS
T-Handle Hex Key SetMetric (10 pcs)Part No. 990-245
Wire Brush SetPart No. 990-3003 pcs9”
Wire Brush SetPart No. 990-300-013 pcs7”
Pick Set Part No. 990-310(4 pcs)
Micro Air Grinder Part No. 990-200 Slim (approx. 5/8" diameter) aluminum body and 56,000 RPM (variable speed) make this handpiece ideal for precision work. Comes in a clear top case. Includes oil, collet and mount and demount wrenches.
-
15
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
14
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
flywheel toolS
Flywheel Pulley Holder ToolPart No. 990-100
Fly Wheel HolderPart No. 551-5110
7.3L Fluid Evacuator Part No. 995-300 Auto Flow Control, Pressure Relief Valve, 1.9 gal Reservoir, Polyethylene will not rust.
Moeller 5.0L Fluid ExtractorPart No. 995-3055.0 L Capacity Auto Flow Control, Pressure Relief Valve, Polyethylene will not rust.
Moeller 7.0L Fluid ExtractorPart No. 995-3107.0 L Capacity Auto Flow Control, Pressure Relief Valve, Polyethylene will not rust.
flUID collectIon & PUmPS
Drill PumpPart No. 52609Drill pump for transferring fluids and oils. Hose included. Hand Powered.
12V Oil ChangerPart No. 52608Includes battery clips with eight foot leads. Magnetized bottom holds the unit to steel surfaces.Pumps hot oil out through the dipstick tube without mess. Completely self-contained 12-volt electric rotary pump has the extra power to drain oil from larger vehicles. *Oil must be hot.
Universal Lube Pump Part No. 52610
Oil Change/Drain Kit Part No. 18-7891Fits: GM, Chrysler & Most Ford's Total length 42 inches 1/2"-20 Threads.
Drum PumpPart No. SV00045Fits: 16-55 gallon lubricant drums
Pail PumpPart No. SV00044Fits: 5 gallon lubricant pails
Permanent Oil Drain KitPart No. 18080-0000Attaches to bottom of Oil Pan
Flat Tank Oil ChangerPart No. 17860-20123-1/2 gallon (13L) compact Oil Changer
Jabsco Porta-Quick Portable Oil ChangerPart No. 17800-2000with 14 quart container
Drill PumpPart No. 17215-0000with Oil Changing Hoses
Economy Oil ChangerPart No. 17850-1012Do-It-Yourself Model12 Volt Pump, 14 quart container
PUmP acceSSorIeS
comPreSSIon - leaK Down teSterS
Pit Posse Compression Tester Part No. PPCT-2092Contains hoses for 10, 12, 14mm. Spark plugs. Gauge comes with case.
Cylinder Compression TesterPart No. 511-9778
Motion Pro 4-Stroke Leak Down TesterPart No. 08-0126 Checks amount of cylinder leakage in a 4- stroke engine. With an air source of 70 to 160 psi this system will pressurize the cylinder with 60 psi of air. 10, 12, & 14mm spark plug thread hoses, regulator and gauge included. Speeds up troubleshooting and helps to isolate bad components.Instructions included.
Pit Posse leak down tester Part No. PPLDT-2723
10mm adapter Part No. 995-10 12mm adapter Part No. 995-12
-
17
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
16
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
Stud PullerPart No. PPSP-2126 Used to install and remove engine studs. Includes 6, 8, 10, 12mm fraction-al stud puller sockets that grab the bolt below the threads, preventing damage. Can also be used with 5/16", 3/8" and 7/16" studs. For use with socket driver or 21mm box/open end wrench. Pack-aged in a durable molded carry case.
Metric And Sae Stud Removal Kit 8pcPart No. 983-440
Impact Driver Set (12 pcs)Part No. 990-210
Impact Driver Set Long NosePart No. 990-215
DrIver Set - comPreSSorS
Piston Ring CompressorPart No. PP2833Fits 50-85MM
4 in 1 Cylinder Hone Set Part No. PPCH-2458 Bore Diameter is 18mm-89mm (11/16"-3-1/2")
PISton - Sleeve InStallatIon toolS
Piston Ring Compressor: 2”Part No. 31461A2
Mercury Wrist Pin Brg InstallerPart No. 985-115 Mercury Cir-Clip Installer L3 thru 2.5 LiterOE#77109A3
Piston Stop Part No. 985-110 Piston Stop, Top Dead Center Stop, Cylinder Heads On, 14mm Spark Plug Hole, Adjustable Depth
Piston Pin PullerPart No. 012-152
Pit Posse Multi-Valve ToolPart No. PPVT-2896Large
Pit Posse Multi-Valve ToolPart No. PPVT-2815Small
Valve Spring CompressorPart No. PPSC-2563 Heavy-duty construction, economical pricedComes with 16mm, 19mm, 23mm, 25mm, 30mm collars. Carrying case includedMax. opening 130mm. Max. depth 100mm
valve traIn toolS
bearIng & Seal DrIverS
Bushing Remover and Installer SetsPart No. 983-450 Removes and inserts bushings in boats. (also works on cars, trucks, motor-cycles and off road equipment). Sizes are stamped on each bushing adapter. Select proper size and drive bushing into place. 3/8”-1 1/4”. Set of 24
Blind Hole Bearing RemoverPart No. PPBR-1694 Set includes 30, 25, 20, 17, 15, 12, 10, and 8mm collets. 2 pound slide hammer.Crossbar type shaft allows easy collet removal. Necessary tool for most transmission rebuilds. Can be used for wheel bearing removal.
Bearing and Seal Driver SetPart No. PPBD-2481
Blind Hole Bearing PullerPart No. 990-360
Bearing Race & Seal Driver KitPart No. 990-355
Bearing and Gear Puller SetPart No. PPBP-2472
Wrist Pin Bearing InstallerPart No. 985-116MercuryO.E. No. 91-74607A3
-
19
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
18
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
gearcaSe toolS
PART NO. DESCRIPTION995-110 Gear case filler shut off valve 995-115 8mm adapter for all metrics except Suzuk 995-120 10mm adapter for Suzuki (some Mariners) 995-125 OMC/Volvo duoprop adapter 995-130 Extension 3/8-16 hose fitting 995-135 OMC Sterndrive Intermed. Housing Adapter 995-140 1/4-20 adapter for small OMC’s 995-145 Replacement 3/8-16 hose fitting 995-150 Tip assembly (male quick-disconnect) (Old Style)
995-151-01 Replacement Tip For 995-151 (New Style)995-151 Tip assembly (male quick-disconnect) (New Style) 995-155 Tip assembly (female quick-disconnect) (Old Style)995-156 Tip assembly (female quick-disconnect) (New Style)
Gearcase FillerPart No. 995-100 An indispensable dispenser, this rugged time saver is one you can use two or three for different lubes or flushing agents. No easier or faster system available, even at twice the price. Three gallon tanks hold 10 quarts of gear lube. Faster flowing. Includes new dispensing enhancement.
995-110 995-125 995-130 995-135
995-140 995-145 995-150 995-155995-151 995-156
995-115 995-120
Gearcase Vacuum TesterPart No. 995-102 A gearcase that holds pressure will hold lubricant, but may leak in the opposite direction, allowing water to enter the unit. Use this to test for inward leakage, assuring that the unit is properly sealed. SEE 995-100 FOR VARIOUS ADAPTERS.
Gearcase Pressure TesterPart No. 995-103 If leakage is suspected due to loss of lubricant, merely pressurize the unit and inspect for signs of seepage. If none is apparent, inspection of shift rod and driveshaft areas is called for. Fol-lowing repairs, the gearcase can be checked before filling by pressurizing and submerging in test tank. SEE 995-100 FOR VARIOUS ADAPTERS.
Quick Disconnect Hose for 995-100Part No. 995-105
gearcaSe toolS
Bearing Removal and Installation ToolPart No. 18-9820 Removes and installs bearings in MC-1, R-MR, Alpha One Gen Two and all Bravo gear cases.
EZ Fill Filler Vent Check ValvePart No. 551-33CV This design allows you to fill your gearcase with a minimum of spillage of gear lube or flushing fluid. A MUST FOR EVERY SHOP. Included with 551-33-1
Gearcase FillerPart No.551-33-1Non-corrosive plastic container. Sturdy tear-drop design resists tipping over. A new design in gearcase fillers makes it easier to fill or flush gearcases. The new valve arrangement for filling and venting has a quick disconnect threaded assembly for filling. The check valve venting allows you to walk away for a few minutes without spilling any gear lube. The check valve on the vent allows you to remove the lower filler without losing a large amount of lube. Includes 551-33CV and Gear Case ADP Kit 551-334K
Lower Unit Fill AdapterPart No. 551-334BPerfect for Bravo's & Verado's
Replacement CDI Gear Case Filler HosePart No. 551-33HB
Adapter KitPart No. 551-334K
CDI Unthreaded NozzlePart No. 551-33UN
CDI Threaded NozzlePart No. 551-33TN
-
21
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
20
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
Universal Puller Kit Part No. 985-125K Removes flywheels, lower main bearings, and gearcase heads. Set consists of these separately available components.O.E. No. 0378103
Flywheel Service KitPart No. 434649 Removes and installs flywheel 60 degree V models.
Universal Flywheel Puller Part No. 985-140 Heavy duty. 1/2” thick plate. 1” dia. fine threaded push rod with built in center. No need for flywheel holder. comes with six 5/16” fine thread bolts.
Mercury Flywheel PullerPart No. 985-145 Fits 2 Cyl. 35 & 40 HP, 4 Cyl. 45 & 50 HP, 3 Cyl 50-75 HP, 4 Cyl 75-125 HP, all 6 cyl. inline engines and all V-6 Engines.O.E. No. 91-849154T1
Verado Flywheel PullerPart No. 985-175 with Lifting EyeO.E. No. 895343T02
FIG. DESCRIPTION PART NO. DLR. LIST1 Puller Body 985-125-01 $25.59 $42.732 Pressing Screw 985-125-05 $9.35 $15.623 Handle 985-125-09 $10.55 $17.614 Washers (3 Pack) 11/32 985-125-02 $3.10 $5.185 Washers (3 Pack) 13/32 985-125-03 $2.26 $3.776 1/4-20x2 1/8 (sold each) 985-125-06 $1.74 $2.917 5/16-18 x 2-3/4 (sold each) 985-125-07 $1.74 $2.918 Guide 985-125-04 $5.25 $8.779 5/16-24 x 2-7/16 (sold each) 985-125-08 $2.26 $3.7710 5/16-18 x 8 in (sold each) 985-125-10 $3.59 $6.00
PUllerS & SPlItterS
10
4
1 3
8 2 6 9 7 5
Spring PullerPart No. 990-340
Seal PullerPart No. PPSP-2454
Mercury Lifting EyePart No. 985-150 Fits 2 cyl. 35 & 40 HP, 4 cyl. 45 & 50 hp, 3 cyl. 50-70, 4 cyl. 75-80 HP. All 6 cyl. inlines and all V6.O.E. No. 91-90455 1
Yamaha V4-V6 2.6 LiterLifting EyePart No. 985-177 O.E. No. YB-06202
Yamaha V6 3.1 & 3.3 Liter Lifting EyePart No. 985-178O.E. No. YB-06442
Mercury / Yamaha 115 / 350 Hp 4-Stroke Lifting EyePart No. 985-180Fits: 4.2 Liter SHO O.E. No. 90890-06820-00, 83164M
OMC Lifting EyePart No. 985-135For all models that need a straight lift from the crankshaft centerline. Use with components of Universal Puller Kit 985-125K O.E. No. 0321537
lIftIng eyeS
Lifting Eye: Johnson / Evinrude E-Tec G2Part No. 985-162O.E. No. 357667
Johnson/Evinrude/BRP60 Degree Lifting EyePart No. 985-160 O.E. No. 342672
OMC Lifting EyePart No. 985-155 A tool for saving labor. Easy to install. Lifts engine in a vertical position. Allows one person to install motor. Johnson- Evinrude V4 & V6.
-
23
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
22
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
Floor StandPart No. 980-100L WT. 39 LBS. A variety of popular engine adapters fit into the I.D. of this stand. Base 1/4” thick X 18”X18” and 30” high. Utilizes two 1/ 2 - 13 threaded set screws with sturdy handle. 1” wide set ring also included. Four holes will accept 1/2” lags.
Vertical to Horizontal AdapterPart No. 980-105L Allows positioning of normally horizontal adapters to be used in the Floor Stands.
StanDS
Adjustable Lower Unit AdapterPart No. 980-120LAdjustable width allows you to handle all outdrives from small motors to V-8’s. 18” arms provide full support and are padded to prevent marring. Includes clamps, bolts and sturdy handle for tightening of various widths.
Bench Stand AdapterPart No. 980-110L A variety of popular engine adapters fit into the I.D. of this stand. 1/2-13 screw with sturdy handlle holds adapters in place. Four holes will accept 3/8” bolts.
Swivel Engine AdapterPart No. 980-135 Fits 980-100L floor stand. 2” X 6” metal tubing. Rotates 360 degrees. Capacity 50 HP
fUel toolS
6 Cylinder Carburetor Synchronizer SetPart No. 999-255
4 Cylinder Carburetor Synchronizer Set Part No. 999-250 4 cyl. Gauge reading: 0 to 76cm/hg in 2" Gauge with Fixed Plate. Individual damping on each gauge. Comes with four 5mm X 170mm adapters, four 5mm X 100mm adapters, four 6mm X 60mm adapters, spare o-rings and an adapter to lengthen your hoses by hooking them to each other.
Replacement Short HosePart No. 999-261
Fuel Pressure GaugePart No. 999-240
Air/Fuel Pressure GaugePart No. 999-260O.E. No. 91-881834A1
Fuel Injection Removal ToolPart No. 999-103 O.E. No. 91-883521
Orifice Plug ScrewdriverPart No. 317002 Removes/installs carburetor fixed orifice plugs
Fuel Filter ToolPart No. 18-79815 Yamaha 63P filter housing wrench
Mercury Fuel Filter ToolPart No. 999-100Removes & Installs Mercury DFI fuel filtersOE Part No. 91-896661
Fuel TesterPart No. 999-110
Float GuagePart No. 324891 Checks carburator float level
Carb Cleaner Wire SetPart No. PPCC-2453
Carb Cleaner Wire SetPart No. 990-330
-
25
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
24
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
DrIll bItS
PART NO. SIZE INCHES999-40 #40 0.098''999-41 #41 0.096''999-42 #42 0.0935''999-43 #43 0.089''999-44 #44 0.086''999-45 #45 0.082''999-46 #46 0.081''999-47 #47 0.0785''999-48 #48 0.076''999-49 #49 0.073''999-50 #50 0.07''999-51 #51 0.067''999-52 #52 0.0635''999-53 #53 0.0595''999-54 #54 0.055''999-55 #55 0.052''999-56 #56 0.0465''999-57 #57 0.043''999-58 #58 0.042''999-59 #59 0.041''999-60 #60 0.04''
PART NO. SIZE INCHES999-61 #61 0.039''999-62 #62 0.038''999-63 #63 0.037''999-64 #64 0.036''999-65 #65 0.035''999-66 #66 0.033''999-67 #67 0.032''999-68 #68 0.031''999-69 #69 0.0292''999-70 #70 0.028''999-71 #71 0.026''999-72 #72 0.025''999-73 #73 0.024''999-74 #74 0.0225''999-75 #75 0.021''999-76 #76 0.02''999-77 #77 0.018''999-78 #78 0.016''999-79 #79 0.0145''999-80 #80 0.0135''
999-160
999-140
Jet Drill Kit A professional Jet Drill Kit. Ideal for Nitrous Oxide Jets as well as Carb Jets. Contains set of Jet Drills and a small tapered reamer. Durable heavy gauge case. Easy drill removal and replacements. Only tough durable jet drill case on the market. Drill and drill handle are permanently bonded to give onepiece, trouble free operation and longer drill life.
gImbal hoUSIng toolS
Gimbal Bearing InstallerPart No. 983-310 Used in conjunction with the 18-4442 to install the Gimbal Bearing.
Gimbal Housing WrenchPart No. 983-325
Gimbal Housing Repair KitsRevolutionary new approach to repair the existing housing without removing the engine. Before this the only way to fix the actual housing was to replace everything, a cost which could easily reach $4,000.00. Simple: A special ring is adhered with a space-age epoxy that cures in 24 hours. Save money and time. Be back in the water the next day! Each kit comes with detailed instructions. Kits are compatible with MerCruiser Alpha, Alpha Gen II and Bravo. Tools needed: Die Grinder, Approved Wire Wheel, Acetone, 1/2” Dia. Drift, Screwdriver and a GHR Kit.
Part No. 983-160 Mercruiser Alpha, MR Drive, #1 Drive (Bellows with groove in it).
Part No. 983-162 Alpha Generation IIPart No. 983-164 Bravo
Bellows Expander ToolPart No. 983-166 Installs exhaust bellows on MC-1, R-MR, Alpha One, Bravo One and Two and Blackhawk drives. Replaces Mercury Mariner 91-45497A1.
Gimbal Bearing Puller and Pressure Plate UnitPart No. 983-300 Comes with plate to accommodate both Mercruiser and the OMC Cobra Bell Housing. Two thrust races and a bearing separate the pressure plate and the tensioning nut. A guide pin is welded to the puller and slides through the pressure plate. This allows you to expand the front of the puller without putting your hand or a wrench inside the Bell Housing. This Blind Hole puller has three 120 deg. segments that fit into and lock onto the inner race of the Gimbal Bearing for easy removal. Spacer allows for 360 deg. wrench rotation.
Sleeve Installation Tool Part No. 983-147Installs the aluminum sleeve in the u-joint bellows of all Bravo, Alpha One/Gen 2, and Blackhawk drive units.Fits: 91-818162
Puller AssemblyPart No. 18-9875Removes and installs Shaft Housing Bearings and Sleeves. Bravo Drive UnitsO.E. No. 91-90244A1
Hinge Pin Tool Part No. 983-165 Splined tool to remove hinge pins.O.E. No. 91-78310
-
27
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
26
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
ShIft cable toolS
alIgnment toolS
Engine Alignment ToolPart No. 18-4442 All OMC Cobra Sterndrives, Mercruiser Drives, 1, 1A, 1B and 1C 1964 and up. Alpha 1 Generation 2, Bravo III. 24 inches longO.E. No. 91-805475A1
Shift Snake Shift Cable InstallerPart No. 983-140 Simply screw swivel male threads into existing cable and pull old cable out. Remove old cable and thread new cable onto shift snake and pull it back thru. Plastic coated cable 5 feet long. A real time saver.
Mercruiser Shift Cable SocketPart No. 983-145 9/16 socket -small outside diameter 4" long 3/8 drive
Pump Alignment ToolsPart No. 18-9872Replaces: Mercury Marine 91-821571A1Description: Aligns Alpha One/Gen II water pump during installation.
vacUUm & PreSSUre teSterS
Pressure/Vacuum TesterPart No. 995-175K COMBINATION UNIT - TWO TESTERS IN ONE! Test pressure and vacuum with one unit. Includes standard adapter, hose and case. Metal construction.
Replacement HosePart No. 551-34HAReplacement Hose for 995-175K
Universal Prop PullerPart No. 983-185
Prop and Bearing Carrier Puller Part No. 983-190Capacity: 5 tons (min.)For All Models
ProPeller PUllerS
Heavy Duty Volvo Dual Prop WrenchPart No. 983-255HFor removing special nut on dual props.1/2” drive, 9-1/2” long.
Prop WrenchPart No. 18-4444O.E. No.: 91-95830A1
Prop Wrench Part No. 18-4459
Prop WrenchPart No. 52600Our prop wrench tightens all 1-1/16” propeller nuts without stripping them. Made of high-tensile-strength nylon.
ProPeller removal toolS & wrencheS
Prop Housing Removal / Insert ToolPart No. 983-113Fits: Volvo / OMCO.E No. 914684, 3850707
Pinion Nut AdapterPart No. 983-125 Holds pinion nut when removing pinion gear and drive shaft on MC- 1, R-MR, Alpha One drive units and outboards. Replaces Merc Mariner 91-61067A3
PInIon nUt toolS
Pinion Nut HolderPart No. 983-120 Holds Pinion Nut - OMC V4, V6, V8, counter rotation and standard.O.E. No. 334455
Mercury / Mercruiser Pinion Gear Shimming Tool Part No. 983-127O.E. No. 91-56048
-
29
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
28
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
I.D. 1.255 INCH
bearIng carrIer toolS
Gearcase Cover Nut ToolPart No. 983-248 Loosens and tightens bearing carrier retainer on Bravo Two Drives.O.E. No. 91-17257
Bravo Two and Three Carrier WrenchPart No. 983-249O.E. No. 91-805374 1fits Mercruiser Bravo 3 Bearing Carrier
PART NO. FITS983-225 Merc-CruiserAlpha 1, Merc V-6 OB. Alpha, Generation II 93 &
up, 3 liter 94 & up, Merc TRS OMC V6 OB, Yam V6 OB up to 225 HP, Suz V6 OB
983-245 Yamaha 70-115 OB
bearing carrier PullerSolid one piece construction. Pulls carrier straight out without catching or binding. Fast, efficient, very resistant to abuse. Will outlast any tool for this job.
Mercury Verado 350 Hp L/U Ring Installer Part No. 983-253OE#91-8M0039309
Bearing Carrier Retainer Nut ToolPart No. 983-252Fits Verado Gear Cases with a 5.44 TorpedoOE#8M0046632
Wrench: Bearing Carrier Handle Mercruiser Bravo 3Part No. 983-246O.E. No. 91-805374
Wrench: Bearing Carrier Mercruiser Bravo 3Part No. 983-246-01O.E. No. 91-805382
Bearing Retainer WrenchPart No. 18-9803 Removes and installs drive shaft bearing retainer on MC-I, R-MR, Blackhawk, all Bravo and all Alpha drive units.O.E. No. 91-17256
Bearing Carrier Retainer Remover ToolPart No.983-112Fits: Bravo 1,2,3 & Sportmaster Hi-PerformanceO.E No. 91-840393
DrIve Shaft toolS
Driveshaft Bearing Retainer ToolPart No. 983-142 Removes and installs threaded bearing re-tainer on alpha stern drives and outboards.O.E. No. 91-43506T
Driveshaft Holding ToolPart No. 003-316-04Fits: Mercury,Yamaha,OMC 22MM ShaftO.E. No. 0311875, 91-889958T, YB-06201
Driveshaft Holding ToolPart No. 18-9854 Provides a wrench surface to turn the drive shaft on MC-1,R-MR, Alpha One, Alpha One/GEN 11 drive units and outboards.O.E. No. 91-56775T
Driveshaft Torque ToolPart No. 90094 Holds driveshaft while removing or installing pinion nut.O.E. No. 91-900094
Drive Shaft Nut WrenchPart No. 983-143Yamaha 4 Stroke 2.8 & 4.2 LiterO.E. No. KL0315Q
Drive Shaft Nut WrenchPart No. 983-144Yamaha 5.3L 4 Stroke O.E. No. YB06833
Tapered Insert ToolPart No. 18-9844 O.E. No. 91-43579For installation of tapered insert retainer.
Drive Shaft Bearing and Preload ToolPart No. 18-9874 O.E. No. 91-14311A2
-
PART NO. MAKE A B C PIN PIN DIA.983-401 Mercruiser 1.066” 1.500” .758” 983-502 .210”
983-403-01 Johnson/Evin .960” 1.358” .755” 983-502 .210”983-403 OMC/Yamaha .965” 1.365” .755” 983-501 .170”983-404 Merc Tilt 1.306” 1.838” .875” 983-502 .210”983-405 Merc Trim .786” 1.110” .655” 983-501 .170”983-406 Yamaha Tilt 1.067” 1.503” .800” 983-500 .158”983-407 Yamaha Trim .888” 1.274” .800” 983-500 .158”
tIlt / trIm wrencheS
Each wrench has three replaceable pins (please specify which wrench you have when ordering replacement pins).Overall Length: 11 7/8" long
31
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
30
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
DrIve Shaft toolS
Backlash Indicator RodPart No. 18-9850 O.E. No. 91-53459For checking gear backlash.
Driveshaft Puller KitPart No. 983-195KRemoves the driveshaft out of the gearcase when the pinion won’t come off (after the pinion nut is removed).Can also be used to remove the upper driveshaft (in 2-piece driveshaft cases) for placing into another gearcase.
Shift Shaft Bushing ToolPart No. 90140For 75-80 HP 4 cyl., 6 cyl. inline, V6. Remove or install shift shaft bushing. O.E. No. 91-31107T
PART NO. DESCRIPTION316612 OMC 1992 & older 40, 48, 50; and
45/55 commercial 334995 OMC 1993 and newer 40, 48, 50;
1993 & newer 45/55 commerical 1989 & newer 50, 60, 70 - 3 cyl.
312752 OMC 1998 and older 3-cylinder 003-316-04 OMC V4/V6/V8, Mercruiser, Yamaha
90230 Fits: Propeller Shaft on MC-I, R-MR. Alpha One, Alpha One Gen II, Bravo One, and TRS
Driveshaft holding Sockets
Part No. 983-410PReplacement Pin For 983-409 & 983-410 (4 Pack)
Universal Trim WrenchPart No. 983-415Kit Contains pin sizes .150, .187, .220 and .250
Trim Cylinder End Cap RemoverPart No. 983-410 Unscrews end caps from trim cylinders. Fits Fastrike.O.E. No. 436710
Trim Cylinder End Cap RemoverPart No. 983-409 Unscrews end caps from trim cylinders. Fits all but Fastrike.O.E. No. 324958
Tilt Tube ReamerPart No. 986-600
Tilt Tube BrushPart No. 986-605
tIlt tUbe toolS
-
33
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
32
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
bearIng carrIer toolS
PART NO. DESCRIPTIONMercury 4" Gear Housing
982-105 Thread Chaser984-105 Replacement Nut
O.E. No.52699983-105 Thread Chaser / Nut Tool
Mercury 4.375" gear Housing982-110 Thread Chaser445-226 Replacement Nut
O.E.No. 8M2011027983-110 Thread Chaser / Nut Tool
Volvo SX 982-125 Thread Chaser
Yamaha 40-50Hp With 79mm Gear982-100 Thread Chaser984-100 Replacement Nut
O.E. No. 697-45384-00983-100 Thread Chaser Adapter*
Yamaha 60-130Hp With 101mm Gear Housing982-115 Thread Chaser984-115 Replacement Nut
O.E. No. 688-45384-00983-115* Thread Chaser / Nut Tool
Yamaha V6 With 111mm Gear Housing982-120 Thread Chaser984-120 Replacement Nut
O.E. No. 6G5-45384-00983-110* Thread Chaser / Nut Tool
* Tool will fit both thread chaser and NutYamaha F300 & F350 V8 5.3 Liter
984-125 Replacement Nut 126mmFits: 983-125-01O.E. No. 6AW-45384-00-00
Yamaha F200-F300 V6 4.2 Liter984-130 Replacement Nut 118mm
Fits: 948-130O.E. No. 6CB-45384-00-00
Verado984-107 Nut: Bearing Carrier Mercury 200-350 6 Cyl
VeradoO.E. No. 8M0001491
thread chasers To accommodate the Bearing Carrier Retainer Nuts. Finally a tool to clean out those corroded damaged threads. Made of heat treated high grade tool steel.
Thread Chaser
Replacement Nut
Thread Chaser Nut Tool
InlIne fUel fIlterS
MARINE PRODUCTSMARINE PRODUCTSMARINE PRODUCTS
1/4” Fuel FilterPart No. 600-300
1/4” Fuel FilterPart No. 600-303
5/16” Fuel FilterPart No. 600-305
3/8” Fuel FilterPart No. 600-310
1/4” & 5/16” Fuel FilterPart No. 18-7723
5/16” Fuel FilterPart No. 18-7856-1
3/8” Fuel FilterPart No. 18-7857-1
Fuel FilterPart No. 7-6966Fits both 5/16” and 3/8” barbs so you always have the right filter.
Boater Sports Fuel LineFilterPart No. 53108Hardware includes 1/4”, 5/16” and 3/8” OD barbs for exact match to fuel lines.
3/8” & 7/16” Fuel FilterPart No. 18-7724
-
35
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
34
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
PART NO. DESCRIPTION BRAND NPT600-426 Aluminum Bracket WSM 1/4"18-7777 Stainless Bracket Sierra 1/4"600-428 Aluminum Bracket WSM 3/8"18-7776 Stainless Bracket Sierra 3/8"600-428C Composite Head Bracket WSM 3/8"
Yamaha Mini Replacement BracketPart No. 18-7774Compact AluminumSierra
fUel water SeParatorS rePlacement bracKet
racor Style acceSSorIeS
fUel water SeParatorS racor Style
Filter Bowl WrenchPart No. 18-9884Fits: WSM, Racor, Sierra, and other aftermarket filter bowlsReplaces: Racor RK22628
Racor Style Drain BowlsPart No. 600-41810 Micron (For use with Fuel Injected Engines)
PART NO. DESCRIPTION BRAND NPT600-456K Kit Filter w/ Aluminum Bracket & Clear Bowl WSM 1/4"600-456-01K Kit Filter w/ Aluminum Bracket & Clear Bowl WSM 3/8"600-456-02K Filter and Bowl for Mercury WSM600-456 Filter Only S3213 & S3220UL WSM
mercury/yamaha/racor Small HoleClear Plastic Drain Bowl Style4 1/8” H X 3 3/4” W10 Micron (For use with Fuel Injected Engines)
racor Drain bowl StyleBig HoleFilter only 4-1/8” H X 3-3/4” W10 Micron (For use with Fuel Injected Engines)O-Ring Included
Johnson/evinrude/omc/volva/cobra efISmall Hole3-1/2” H X 3-1/8” W10 Micron (For use with Fuel Injected Engines)O-Ring Included
Johnson/evinrude/omc/I/oBig Hole4-1/8” H X 3-3/4” W10 Micron (For use with Fuel Injected Engines)O-Ring Included
PART NO. DESCRIPTION RACOR NO. MERCURY NO. O.E. NO. BRAND600-454 S3227 Filter Only 17670-ZW1-801AH 35-886638 99105-20005 WSM600-454-02K S3227 Filter w/Clear Drain Bowl 17670-ZW1-801AH 35-886638 99105-20005 WSM
fUel water SeParatorS racor Style
fUel water SeParatorS
PART NO. DESCRIPTION BRAND NPT10 Micron (For use with Fuel Injected Engines)600-440K Kit Filter w/ Aluminum Bracket WSM 1/4"600-440 Filter Only WSM21 Micron (For use with Carbureted Engines)600-441K Kit Filter w/ Aluminum Bracket WSM 1/4"600-441 Filter Only WSM
mercury/yamaha Small Hole3-7/8” H X 3-3/4” W Filter Kit Includes: Aluminum Bracket & Filter
PART NO. O.E. NO.600-446 503906
PART NO. O.E. NO.600-444 503905
-
37
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
36
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
PART NO. DESCRIPTION YEAR BRAND O.E. NO.600-448 Filter & Sensor 95 & Earlier WSM 35-18458T3
31-18458Q331-18458A3
600-450 Filter & Sensor 96 & Later WSM 18458535-18458Q435-18458A4
mercury efI replacement filters w/ Sensor3-1/2” H X 3-1/8” W 10 Micron (For use with Fuel Injected Engines)
mercury/yamaha Small Hole4-1/8” H X 3-3/4” W/ Filter Kit Includes: Aluminum Bracket & Filter
PART NO. DESCRIPTION BRAND NPT10 Micron (For use with Fuel Injected Engines)600-442K Kit Filter w/ Aluminum Bracket WSM 1/4"600-442-01K Kit Filter w/ Aluminum Bracket WSM 3/8"600-442 Filter Only WSM21 Micron (For use with Carburated Engines)600-443K Kit Filter w/ Aluminum Bracket WSM 1/4"600-443-01K Kit Filter w/ Aluminum Bracket WSM 3/8"600-443 Filter Only WSM
fUel water SeParatorS
PART NO. DESCRIPTION BRAND NPT O.E. NO.600-452K Kit Filter w/ Aluminum Bracket WSM 1/4"600-452-01K Kit Filter w/ Aluminum Bracket WSM 3/8"600-452 Filter Only WSM MAR-FUELF-IL-TR
PART NO. DESCRIPTION BRAND O.E. NO.600-453 Filter Only WSM MAR-MINIF-IL-TR
yamaha high-capacity fuel water Separator6 1/8” H X 3 3/4” W Filter Kit Includes: Aluminum Bracket & Filter10 Micron (For use with Fuel Injected Engines)
yamaha Style mini Kit Small hole4 1/8” H X 3 1/8” W10 Micron (For use with Fuel Injected Engines)
rePlacement oetIKer clamPS
PART NO. STANDARD SIZE METRIC SIZE13-162-16 0.209-0.256" 005.3mm-006.5mm13-162-18 0.228-0.276" 006.0mm-007.0mm13-162-20 0.268-0.315" 006.8mm-008.0mm13-162-22 0.276-0.343" 007.0mm-008.7mm13-162-24 0.307-0.374" 007.8mm-009.5mm13-162-25 0.327-0.394" 008.3mm-010.0mm13-162-26 0.347-0.413" 008.8mm-010.5mm13-162-27 0.362-0.429" 009.2mm-010.9mm13-162-28 0.378-0.445" 009.6mm-011.3mm13-162-29 0.398-0.465" 010.1mm-011.8mm13-162-30 0.386-0.484" 009.8mm-012.3mm13-162-31 0.406-0.504" 010.3mm-012.8mm13-162-32 0.425-0.524" 010.8mm-013.3mm13-162-34 0.445-0.543" 011.3mm-013.8mm13-162-35 0.453-0.551" 011.5mm-014.0mm13-162-36 0.472-0.571" 012.0mm-014.5mm13-162-38 0.504-0.602" 012.8mm-015.3mm13-162-40 0.520-0.618" 013.2mm-015.7mm13-162-42 0.539-0.638" 013.7mm-016.2mm13-162-44 0.571-0.669" 014.5mm-017.0mm13-162-46 0.602-0.728" 015.3mm-018.5mm13-162-48 0.654-0.780" 016.6mm-019.8mm13-162-52 0.701-0.827" 017.8mm-021.0mm13-162-56 0.764-0.890" 019.4mm-022.6mm13-162-60 0.823-0.949" 020.9mm-024.1mm13-162-64 0.882-1.008" 022.4mm-025.6mm13-162-68 1.18” 30.1mm13-162-72 1.24” 31.6mm13-162-73 1.39” 35.4mm13-162-74 1.48” 37.6mm13-162-76 1.61” 41.0mm
Sold in 10 Packs
oetIKer clamP KIt
Part No. 990-500Comes with Pliers and Assortment of ClampsContains 10.3mm to 31.6mm Clamps
Part No. 990-505Comes with Pliers and Assortment of ClampsContains 6.0mm to 12.3mm Clamps
Part No. 990-115787145 Replacement Pliers for Oetiker Clamps
-
39
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
38
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
MARINE PRODUCTSMARINE PRODUCTSMARINE PRODUCTS
clamPS anD tIeS
PART NO. SIZE WIDTH13-161 1/4”-5/8” 1/4"13-161-01 5/16"-7/8" 1/4"13-161-03 1/2"-1" 1/4"13-161-05 3/4"-1 3/4" 1/4"13-161-04 13/16"-1 1/2" 1/4"13-161-02 1 1/4"-2" 1/4"
PART NO. SIZE WIDTH57202 1/4”-5/8” 1/4"57204 3/8”-7/8” 1/4"57206 7/16”-1” 1/4"57208 1/2”-1 1/16” 1/4"57210 4/5”-1 1/4” 1/2"57212 11/16”-1 1/2” 1/2"
wSm hose clamps boater Sports hose clamps
Stainless Steel, Sold each Stainless Steel, Sold in pairs
Multi Size Packs
PART NO. SIZE QTY COLORH303-4681 4",6",8" 30 (10 each size) RedH303-4682 4",6",8" 30 (10 each size) OrangeH303-4683 4",6",8" 30 (10 each size) YellowH303-4684 4",6",8" 30 (10 each size) GreenH303-4685 4",6",8" 30 (10 each size) BlueH303-4686 4",6",8" 30 (10 each size) PurpleH303-4687 4",6",8" 30 (10 each size) BlackH303-4688 4",6",8" 30 (10 each size) GreyH303-4689 4",6",8" 30 (10 each size) WhiteH303-4119 8" 100 RedH303-4120 8" 100 OrangeH303-4121 8" 100 YellowH303-4122 8" 100 GreenH303-4123 8" 100 BlueH303-4124 8" 100 PurpleH303-4125 8" 100 BlackH303-4126 8" 100 GreyH303-4127 8" 100 WhiteH303-4225 8" 1000 Black
PART NO. O.E. NO. DESCRIPTION18-8200-9 322653 .360-.406 Size 218-8201-9 124249 .410-.468 Size 418-8202-9 322654 .475-.536 Size 618-8020-9 322652 .538-.608 Size 818-8021-9 911616 .597-.665 Size 1018-8203-9 329653 .750-.875 Size 1418-8204-9 324825 .875-.975 Size 19
helIx mUltI-coloreD cable tIeS
SnaPPer clamPS
Sold in 10 pack
Red 271 High Strength Thread Locker 0.5mLPart No. 013-271
Gasket Sealing Compound16 oz. Part No. 013-235
Red Gasket Eliminator50mL Part No. 013-518
Red Gasket Eliminator6mLPart No. 013-518-01
Red Gasket Eliminator Cartridge300mLPart No. 013-518-02
Black Hi-Performance RTV Silicone Gasket Maker70 mL Part No. 013-598
Blue 242 Thread Locker50mL Part No. 013-242-02
Red 262 Permanent Strength Thread Locker0.5mLPart No. 013-262
Red 262 Permanent Strength Thread Locker6mL Part No. 013-262-01
Red 271 High Strength Thread Locker10mL Part No. 013-271-01
Bearing Mount: Press Fit Repair 66050mL Part No. 013-237
Red 262 Permanent Strength Thread Locker50mL Part No. 013-262-02
Blue 242 Thread Locker10mL Part No. 013-242-01
Red 271 High Strength Thread Locker50mLPart No. 013-271-02
Blue 242 Thread Locker0.5mL Part No. 013-242
loctIte aDheSIveS
-
41
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
40
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
Liquid Gasket3.5 oz. tube Part No. 013-1184Excellent padding properties make this semi-drying sealer perfect for joint surfaces with large clearance Special synthetic rubber absorbs vibrations and impacts without failure, especially where coolants are involved
Silicone Liquid Gasket 3.5 oz. tube Part No. 013-1211Uses silicone rubber as a primary componentPerfect for sealing complex three-point surfaces100% effective over a wide temperature range, -60° C to 250° C
Frequent Repair Thread Lock10mL bottle Part No. 013-1342 Perfect for small screws and bolts
Bearing and Stud Thread Lock10mL bottle Part No. 013-1333Includes high-strength retaining properties for bearings and studs
Thread Lock10mL bottlePart No. 013-1303Designed for various threads, screws, bolts, piping joints, gears and pulleys
Super Glue2 gram tube Part No. 013-1742ThreeBond Super Glue attains practical use strength in a matter of secondsContains no evaporative elements, so there’s never any shrinkage to weaken bonding pointsExcellent for non-porous material
High-Temperature Thread Lock10mL bottle Part No. 013-1360Incorporates anaerobic locking agents, plus a heat-resistant elementIdeal for sealing engine and exhaust components
threebonD aDheSIveS
Universal 12V Mini Slimline Jump StarterPart No. 004-900
Battery Tenders (Chargers)Part No. DL9012Battery Tender 12V
Battery Charger ComponentsPart No. 67853BWall Bracket for Optimate III
Battery Tenders (Chargers)Part No. DL0693Battery Tender Quick Disconnect Harness for Batteries
Battery Charger ComponentsPart No. 67853JAllows Optimate II to be used with Gates brand charger leads
Battery Tenders (Chargers)Part No. DL0123Battery Tender JV 12V
Battery Tenders (Chargers)Part No. DL0150Waterproof Battery Tender 12V
battery chargerS
GET JUMP STARTER Part No. GK-JMPSTR-0001
-
43
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
42
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
UL Approved 1426 600V Marine 105° C.Lengths larger or smaller available by special order.
HD Battery Terminal CrimperPart No. 996-200Use on Battery Terminal/Lugs. Designed to crimp large, heavy duty cable terminals. Welded plate construction for long life. Easy to read crimp depth scales on both sides of the punch. To operate, set up cable and strike punch with a hammer or mallet. (Always use safety glasses). Weight 2 lbs.
PART NO. COLOR GAUGE LENGTHCOB-A2006T-R Red 6 gauge 50' spoolCOB-A2006T-B Black 6 gauge 50' spoolCOB-A2004T-R Red 4 gauge 50' spoolCOB-A2004T-B Black 4 gauge 50' spoolCOB-A2002T-R Red 2 gauge 50' spoolCOB-A2002T-B Black 2 gauge 50' spoolCOB-A2110T-R Red 1/0 gauge 50' spoolCOB-A2110T-B Black 1/0 gauge 50' spool
PART NO. COLOR GAUGE LENGTHDEK-04284 Black 4 Gauge Double Eye 3/8" Stud 24"DEK-04278 Red 4 Gauge Double Eye 3/8" Stud 24"DEK-04287 Black 4 Gauge Double Eye 3/8" Stud 49"DEK-04281 Red 4 Gauge Double Eye 3/8" Stud 48"DEK-04296 Black 2 Gauge Double Eye 3/8" Stud 24"DEK-04290 Red 2 Gauge Double Eye 3/8" Stud 24"DEK-04299 Black 2 Gauge Double Eye 3/8" Stud 49"DEK-04293 Red 2 Gauge Double Eye 3/8" Stud 49"
battery wIre
bulk Spool battery cabletinned copper
Premade battery cables
COLOR ITEM USEBlack or Yellow Ground Return, negative mainsRed Main Power Feeds Positve mains(particularly unfusedLight Blue Oil Pressure Oil pressure sender to gaugeDark Blue Cabin, Instrument Fuse or switch to lightsYellow Generator Field Generator to regulator field terminalYellow with Red Starting Circuit Starting switch to solenoidGreen Bonding System Bonding wires - if insulatedPink Fuel gauge Fuel Gauge sender to gaugeBrown with Yellow Bilge Blowers Fuse or switch to blowerBrown General Armature General armature to regulatorBrown Alternator Charge Light General terminal to regulator or alternator, Aux.Brown Pumps Fuse or switch to pumpsGrey Navigation Lights Fuse or switch to lightsGrey Tachometer Tachometer sender to gaugeOrange Navigation Lights Ammeter to alternator or generator fuses or switches output and accessOrange Common Feed Distribution panel to accessory switchPurple Ignition Ignition switch to coil and electrical instrumentsPurple Instrument Feed Distribution panel electrical instruments
PART NO. DESCRIPTIONSHI-128-0126 1/2" x 50' Black 50' boxSHI-128-0120 1/2" x 50' Black by footSHI-128-0346 3/4" x 50' Black 50' boxSHI-128-0340 3/4" x 50' Black by footSHI-128-1006 1" x 50' Black 50' boxSHI-128-1000 1" x 50' Black by footDEK-04299 Black 49"DEK-04293 Red 49"
PART NO. DESCRIPTIONCOB-B7W16T-21 Black/Red 16/2 gaugeCOB-B7G16T-21 Black/Red 16/2 gaugeCOB-B7W16T-30 Black/Green/White 16/3 gaugeCOB-B7W14T-21 Black/Red 14/2 gaugeCOB-B7G14T-21 Black/Red 14/2 gaugeCOB-B7W14T-30 Black/Green/White 14/3 gaugeCOB-B7W12T-21 Black/Red 12/2 gaugeCOB-B7G12T-21 Black/Red 12/2 gaugeCOB-B7W12T-30 Black/Green/White 12/3 gaugeCOB-B7W10T-21 Black/Red 10/2 gaugeCOB-B7G10T-21 Black/Red 10/2 gaugeCOB-B7W10T-30 Black/Green/White 10/3 gaugeCOB-B7W82T-21 Black/Red 8/2 gauge
marIne wIre
marine wiring color code
multi-conductor marine cabletinned copper
Split wire conduit
-
45
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
44
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
(25 per package)
Strip-N-CrimpPart No. JMA19994Autostripper 10 gauge to 26 gauge, crimps sparkplug wire.
Professional CrimperPart No. JMA199979 1/2" long with cushioned handles, cuts, and crimps 10-20 gauge wire.
Pack of 25Part No. 996-215
Pack of 25Part No. 996-220
Pack of 25Part No. 996-225
Shrink tube butt connectors (Sold 25 per package)A premium terminal best used where moisture and corrosion are a problem. After crimping these terminals to wire, heat is applied enabling the adhesive within each Shrink Tube Terminal to melt and flow evenly to seal the connection against the harshest environments.
SolDerleSS termInalS
PART NO. COLOR GAUGE DESCRIPTIONFTZ-30379 Blue 16-14 female bulletFTZ-30387 Blue 16-14 Male insul. spadeFTZ-30397 Blue 16-14 female insul. spadeFTZ-31313 Blue 16-14 #8 ringFTZ-31314 Blue 16-14 #10 ringFTZ-31315 Blue 16-14 1/4" ringFTZ-31316 Blue 16-14 5/16" ringFTZ-31317 Blue 16-14 3/8" ringFTZ-31330 Blue 16-14 buttFTZ-31369 Blue 16-14 male bulletFTZ-31383 Blue 16-14 male spadeFTZ-31393 Blue 16-14 female spadeFTZ-35430 Blue to Yellow 16-10 step-downFTZ-30497 Yellow 12-10 female insul. spadeFTZ-31413 Yellow 12-10 #8 ringFTZ-31414 Yellow 12-10 #10 ringFTZ-31415 Yellow 12-10 1/4" ringFTZ-31416 Yellow 12-10 5/16" ringFTZ-31417 Yellow 12-10 3/8" ringFTZ-31493 Yellow 12-10 female spadeFTZ-31114 Red 22-18 #10 ringFTZ-31115 Red 22-18 1/4" ringFTZ-31117 Red 22-18 3/8" ringFTZ-31514 Red - LG 8 gauge #10 ringFTZ-31515 Red - LG 8 gauge 1/4" ringFTZ-31516 Red - LG 8 gauge 5/16" ringFTZ-31517 Red - LG 8 gauge 3/8" ring
waterproof
Pink22-18 Gauge
blue16-14 Gauge
yellow12-10 Gauge
UnIverSal alUmInUm hUll anoDeS
UnIverSal alUmInUm rUDDer - trIm tab anoDeS
UnIverSal alUmInUm Shaft anoDeS
PlatePart No. PMCH406APlate Anode: 8-1/2’’ x 4-1/4’’
Diver's AnodePart No. PMCHDDRAPlate Anode: 12’’ x 6’’
DokaPart No. PMCHDOKAStrainer Anode: 3-1/4’’ x 1-1/4’’
Bennett Trim TabPart No. PMCHBNTATrim Anode Set: For Bennett Trim Tabs
Boater's DreamPart No. PMCHYAAPlate Anode: 12’’ x 6’’
a
bA B WEIGHT PART NO.1 7/8” (48mm) 1/4” (7mm) 0.1lbs (0.03Kg) PMCR1875A2 13/16” (72mm) 1/2” (13mm) 0.33lbs (0.15Kg) PMCR2813A3 3/4” (95mm) 1/2” (13mm) 0.6lbs (0.27Kg) PMCR3750A5” (127mm) 7/8” (22mm) 1.82lbs (1.63Kg) PMCR5000A
rudder/trim tab - Double
ab
ccollar - Streamlined - ImperialA B C WEIGHT PART NO.3/4” (19mm) 2 1/8” (54mm) 2 1/8” (54mm) 0.45lbs (0.2Kg) PMCC0750A1” (25.4mm) 2 1/8” (54mm) 2 1/8” (54mm) 0.4lbs (0.18KG) PMCC1000A1 1/4” (32mm) 2 1/4” (57mm) 2 1/2” (64mm) 0.45lbs (0.21Kg) PMCC1250A1 3/8” (35mm) 2 1/2” (64mm) 2 1/2” (64mm) 0.6lbs (0.27Kg) PMCC1375A1 1/2” (38mm) 2 1/2” (64mm) 1 1/4” (32mm) 0.53lbs (0.24Kg) PMCC1500A
-
47
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
46
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
ANODE DIAMETER ANODE LENGTHINCH MM INCH MM PART NO.1/4 6.4 2 50.8 PMCCE-003/8 9.5 1 3/4 44.5 PMCCE-03/8 9.5 3/4 19.1 PMCCE-0B1/2 12.7 2 50.8 PMCCE-11/2 12.7 1 1/2 38.1 PMCCE-1E
The Alloy:SecureCore™ anodes are made from aluminum alloy, which is more active, longer lasting than zinc. It is also suitable for use in all types of water, including freshwater.
Construction:The steel core holds the anode material secure until consumed, preventing the loss of loose pieces which can cause blockage and damage.
Plate - oval 4 holePart No. 450-M259-1/4” x 3-3/8”
Large Strainer - 2 holePart No. 450-Z13/4”
Propeller ZincPart No. 450-PNDZC097/8” NC 9, 1-1/4” shaft
PlatePart No. 450-M4058-1/2” x 4”, 2-hole Sea Ray
Bennett TabPart No. 450-BNT11”
Teardrop (large)Part No. 450-T215-1/2” x 2”
Plate (breakoff)Part No. 450-M407-1/2” x 2-3/4”
Propeller ZincPart No. 450-PNCZC103/4” NC 10, 1-1/8” shaft
Plate - oval 1 holePart No. 450-MZ4048-1/2” x 3-1/4” oval, 1-hole
StrainerPart No. 450-DOKA7/8”
Teardrop (small)Part No. 450-T203-1/2” x 1-3/4”
Plate - rect. 5 holePart No. 450-M306-1/4” x 2-3/4”
Plate - oval 2 holePart No. 450-M244-3/4” x 2”
Fish AnodePart No. 450-croaker
Divers dream - slottedPart No. 450-M10S6” x 12”, 1/2” thick
Divers dream - smallPart No. 450-diversmini3” x 6”, 1/2” thick
UnIverSal PencIl anoDeS
UnIverSal ZInc anoDeS
UnIverSal ZInc anoDeS
SIZE DESC. PART NO.1/4” x 2 x 1/8 NPT w/Plug 450-E-00
Zinc Only 450-E-00Z3/8” x 1-3/4” x 1/4 NPT w/Plug 450-E-0Z
Zinc Only 450-E-0Z3/8” x 2” x 3/8 NPT w/Plug 450-E-1H
Zinc Only 450-E-1HZ1/2” x 2” x 3/8 NPT w/Plug 450-E-1
Zinc Only 450-E-1Z5/8” x 2” x 1/2 NPT w/Plug 450-E2
Zinc Only 450-E2Z3/4” x 2” x 3/4 NPT w/Plug 450-E3
Zinc Only 450-E3Z3/4” x 3” x 3/4 NPT w/Plug 450-E-4
Zinc Only 450-E-4Z
SIZE REF NO PART NO.3/4” D001CB 450-C-17/8” D002CB 450-C-21” D003CB 450-C-31-1/4” D005CB 450-C-51-3/8” D006CB 450-C-61-1/2” D007CB 450-C-7
Zinc - Pencil
Zinc - Shaft (low clearance)
SIZE REF NO PART NO.1/2” SL00CB 450-X-03/4” SL01CB 450-X-17/8” SL02CB 450-X-21” SL03CB 450-X-31-1/8” SL04CB 450-X-41-1/4” SL05CB 450-X-51-3/8” SL06CB 450-X-61-1/2” SL07CB 450-X-71-3/4” SL08CB 450-X-82” SL09CB 450-X-92-1/4” SL10CB 450-X-102-1/2” SL11CB 450-X-11
SIZE REF NO PART NO.1-7/8” RB2 450-R-12-13/16” RB3 450-R-23-3/4” RB4 450-R-35” RB5 450-R-45-1/8” RB5XL 450-R-5
Zinc - Shaft
Zinc - rudder
-
49
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
48
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
DraIn PlUgS
Deck & Baitwell Plugs The neoprene body, stainless steel plates and adjustable brass cam snap provide a leak-proof, non slip seal. Sold in Pairs.
Aluminum Drain PlugsDrain plugs constructed of aluminum with a rubber expansion plug offers a smooth, tight seal. Sold in Pairs.Part No. 548241” Snap TypePart No. 548221” Twist Type
Brass Drain PlugDrain plugs constructed of brass with a rubber expansion plug offers a smooth, tight seal. Part No. 548421” Snap Type - EachPart No. 548441” Twist Type - EachPart No. 5484048 Ct. Display Box
Part No. 548563/4” - Pair
Part No. 548607/8” - Pair
Part No. 548507/16” - Pair
Part No. 548501/2” - Pair
Part No. 548545/8” - Pair
Part No. 5485811/16” - Pair
Garboard Drain Plugs - Brass Provides bilge drainage when hauling out. The nut plug is easily removed with a wrench or pliers. Machined, tapered pipe threads ensure water tight fit. All garboard drain plugs are 1/2” NPT male threads. Part No. 7-0322Drain & Plug KitPart No. 54836Replacement Plug OnlyPart No. 54835Plug w/ EZ Screw
Drain Tube - Brass Brass drain tube for use as drain for transom, motorwell, livewell or baitwell. 1” inside diameter. Part No. 548323” LongPart No. 021003-300D3” x 1” OD
Stainless Steel Drain PlugDrain plugs constructed of brass with a rubber expansion plug offers a smooth, tight seal. Part No. 548021” Snap Type - EachPart No. 548431-1/4” Snap Type - EachPart No. 548041” Twist Type - Each
Universal Prop PullerPart No. 983-185
Prop and Bearing Carrier Puller Part No. 983-190Capacity: 5 tons (min.)For All Models
Heavy Duty Volvo Dual Prop WrenchPart No. 983-255HFor removing special nut on dual props.1/2” drive, 9-1/2” long.
Part No. 983-255NO.E. No. 3851569
Prop WrenchPart No. 18-4444Replaces: 91-95830A1
Prop Wrench Part No. 18-4459 Replaces: 91-95830A1
Prop WrenchPart No. 52600Our prop wrench tightens all 1-1/16” propeller nuts without stripping them. Made of high-tensile-strength nylon.
ProPeller toolS
-
51
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
50
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
Turning Point manufactures Express propellers to fit 9.9 (Bigfoot)-300+HP Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 & 4 blade, left & right rotation prop models with a variety of diameter & pitch options available for almost all boat types. Our Props Run Faster, Pull Harder, and Handle Better.
tUrnIng PoInt ProPellerS - exPreSS
9.9-35hP engines with a 3” gearcase
DIA X PITCH BLADES ROT. PART NO.
10.5x11 3 R TP-3120111110.125x13 3 R TP-31201311
DIA X PITCH BLADES ROT. PART NO.
10.325x11 3 R TP-3121111110.375x13 3 R TP-31211311
DIA X PITCH BLADES ROT. PART NO.
10.5x11 3 R TP-3122111110.125x13 3 R TP-31221311
1. find your engineUse all elements to find your
exact engine model.
2. buy this hub KitAll Props require an
installation kit
3. Pick your housing PitchOrder both Prop and
Installation Kit (2 Items)
ENGINE BRAND - VARIOUS SPLINED PROP SHAFTS PART NO.Evinrude®/Johnson®: (14 spline)2 stroke: 20, 25 (‘84+), 25 com-mercial (‘93-’05), 30 (‘84+), 35 (‘76-’05)/E-Tec: 25HP, 30HP/H.O.: 15HP
TP-11200200
Force®: (10 spline)25HP ('95-'98) TP-11200100Mercury® & Mariner®: (10 spline)2 stroke: 18HP (‘80-’85), 20HP (‘86+), 25HP (‘85+)4 stroke Bigfoot/Sail: 9.9HP (‘99-’05), 15HP (‘99-’05)
TP-11200100
ENGINE BRAND - 10 SPLINE PROP SHAFT PART NO.Honda®: BF25, BF30 TP-11200800Mercury® & Mariner®: 4 stroke ('06+, cotter pin shaft): 25HP, 30HP
TP-11200800
Parsun®: 20HP, 25HP TP-11200500Nissan® & Tohatsu®: 2 and 4 stroke: 25HP, 30HP
TP-11200800
Yamaha®: 2 stroke: 20HP, 25HP, 30HP/4 stroke: 25HP
TP-11200500
ENGINE BRAND - 10 SPLINE PROP SHAFT PART NO.Evinrude®/Johnson®: 4 stroke: 25HP, 30HP
TP-11200600
Suzuki®: DT 2 stroke ('87+): 20, 25, 25C, 30, 30C DF 4 stroke: 25HP, 30HP
TP-11200600
Turning Point manufactures Express propellers to fit 9.9 (Bigfoot)-300+HP Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 & 4 blade, left & right rotation prop models with a variety of diameter & pitch options available for almost all boat types. Our Props Run Faster, Pull Harder, and Handle Better.
tUrnIng PoInt ProPellerS - exPreSS
25-75hP engines with a 3.5" gearcase
DIA X PITCH BLADES ROT. PART NO.
10.75x12 3 R TP-3130121210.5x13 3 R TP-31301312
10.38x14 3 R TP-31301412
ENGINE BRAND - 13 SPLINE PROP SHAFT
PART NO.
Evinrude®/Johnson®: 4 stroke: 40HP, 50HP
TP-11300101
Force®: 40HP ('95-'98), 50HP ('95-'98), 70HP ('91-'95), 75HP ('96-'98)
TP-11300101
Honda®: BF 4 stroke: 35, 40, 45, 50, 60HP, (not P60)
TP-11300200
Mercury® & Mariner®: 2 stroke: 30HP (‘94+)/35, 45, 55/40, 50, 60 (‘77+)/70HP (‘77-’83) 4 stroke: 25HP, 30HP Bigfoot/30HP (‘94-’05)/40HP (*not Bigfoot, CT, or SeaPro 4cyl.), 45HP, 48HP (Mariner), 50HP (*not bigfoot or CT), 55HP (SeaPro), 60HP (*not Bigfoot, CT, or SeaPro) *note: see 4.25” Gearcase
TP-11300101
Nissan® & Tohatsu®: 40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
TP-11300301
Parsun®: T30, T35, T36, T40 TP-11300200Suzuki®: DT 2 stroke (‘89+): 35C, 40, 50, 50M, 55, 60, 65HP DF 4 stroke: 40HP, 50HP/ (‘10+): 40A, 50A, 60A
TP-11300101
Yamaha®: 2 stroke: 40HP to 55HP/4 stroke: FT25HP High Thrust, 30HP to 60HP
TP-11300200
-
53
Copy
right
©MMX
XI W
SM E
urop
e™ -
All ri
ghts
rese
rved -
All o
ther p
rodu
ct na
mes a
nd tr
adem
arks
men
tione
d are
used
for id
entifi
catio
n pur
pose
s only
and r
emain
the e
xclus
ive pr
oper
ty of
their r
espe
ctive
owne
rs.
52
Catal
ogue
2021
Outils
& Ac
cess
oires
Mari
ne Marine Tools & Accessories 2021 Catalog
WSM Europe™ - SARL au capital de €10,000.00 - RCS Antibes 2003B853
Tools & Accessories Tools & Accessories
http://www.wsm.fr - [email protected] - +33 6 75 50 55 45
ENGINE BRAND - VARIOUS SPLINED PROP SHAFTS PART NO.Evinrude®/Johnson®: (13 spline shaft)2 cyl: 50HP (‘71-’74)/45 to 55HP commercial3 cyl: 55, 60, 65, 70HP, 75HP with large gearcase, 65HP commercial 4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 (‘86-’94), 125, 135 (‘73-’76), 140 (‘77-’84, ‘86-’94)/H.O.: 115HPE-Tec: 40, 50, 60, 65, 75HP/20” shaft: 90, 115HP (not pontoon series), 130HP (‘09-’10)
TP-11500300
Evinrude®/Johnson®: (13 spline shaft)4 stroke: 60HP, 70HP
TP-11500600
Force®: (15 spline shaft)75HP ('99)/90HP to 150HP ('95+)
TP-11500100
Honda®: (15 spline shaft) ('95-'98): 75HP, 90HP
TP-11500100
Honda®: (15 spline shaft)P60/75, 90 (‘99+)/100, 115, 130HP. (not 115D)
TP-11500700
Mercury® & Mariner®: (15 spline shaft) (2 and 4 stroke)40 to 60 Bigfoot/70 (‘87-’89)/75, 80 (‘78-’89), 90, 100, 115, 125, 140HP/150xR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.) EFI CT & SeaPro 4cyl: 40 to 75HP/OptiMax: 75, 90, 115, 125HP
TP-11500100
Nissan® & Tohatsu®: (15 spline shaft) 60C, 70C/90 to 140HP (not BFT)
TP-11500500
OMC®: (13 spline shaft)Cobra 400: 2.3 to 3.0L ('78-'89)/Sea Drive: 1.6 to 1.8L
TP-11500300
Parsun®: (15 spline shaft)T60, T75, T85, T90
TP-11500000
Suzuki®: (13 spline shaft)DT 2 Stroke (‘89+): 75 to 140HP /DF 4 Stroke (‘98-’09): 60HP, 70HP
TP-11500600
Suzuki®/Johnson®: (15 spline shaft)use 4 Blade only4 stroke: (‘09+)70A, 80A, 90A, 70, 80/ (‘01+)90, 100, 115 (Not 115A)
TP-11500900
Suzuki®/Johnson®: (15 spline shaft)USE 4 BLADES ONLYDF 4 stroke: 50AV, 60AV, 115A, 140, 140A
TP-11500100
Yamaha®: (15 spline shaft)High Thrust: T50, FT60/ 2 stroke: 60 to 100HP/4 stroke: 70 to 100HP
TP-11500000
Yamaha®: (15 spline shaft)2 stroke: 115 to 130HP/4stroke: 115HP
TP-11500500
40-150hP engines with a 4.25” gearcase
Turning Point manufactures Express propellers to fit 9.9 (Bigfoot)-300+HP Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 & 4 blade, left & right rotation prop models with a variety of diameter & pitch options available for almost all boat types. Our Props Run Faster, Pull Harder, and Handle Better.
tUrnIng PoInt ProPellerS - exPreSS
Compatible with Competitors’ Hub & Prop SystemsWorks with Mercury ® Flo-Torq II®, Michigan Wheel ®xHS ®, Solas ® Rubex ™
DIA X PITCH BLADES ROT. PART NO.
13.25x17 3 R TP-3143171213.25x19 3 R TP-3143191213.25x21 3 R TP-31432112
DIA X PITCH BLADES ROT. PART NO.14x11 4 R TP-3143113014x13 4 R TP-31431330
13.5x15 4 R TP-3143153013.25x17 4 R TP-31431730
13x19 4 R TP-3143193013x21 4 R TP-31432130
tUrnIng PoInt ProPellerS - exPreSS
Turning Point manufactures Express propellers to fit 9.9 (Bigfoot)-300+HP Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 & 4 blade, left & right rotation prop models with a variety of diameter & pitch options available for almost all boat types. Our Props Run Faster, Pull Harder, and Handle Better.
DIA X PITCH BLADES ROT. PART NO.
14.25x17 3 R TP-3150171214.25x17 3 L TP-3150172214.25x19 3 R TP-3150191214.25x19 3 L TP-3150192214.25x21 3 R TP-3150211214.25x21 3 L TP-31502122
DIA X PITCH BLADES ROT. PART NO.15x15 4 R TP-3150153215x15 4 L TP-31501542
14.5x17 4 R TP-3150173114.5x17 4 L TP-3150174114x19 4 R TP-3150193114x19 4 L TP-31501941
DIA X PITCH
BLAD ES ROT. PART NO.
15.6x17 3 R TP-3151171015.6x17 3 L TP-3151172015.6x19 3 R TP-3151191015.6x19 3 L TP-3151192015.6x21 3 R TP-3151211015.6x21 3 L TP-31512120
The New Express® Mach3™ OS™ Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced a propeller with excellent hole shot, impressive bow lift, and class leading cornering. The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90HP and larger 4.75” gearcase outboards from all engine manufacturers, and Mercury® Alpha One™ and Bravo One™, and Volvo® Penta® SX sterndrives. Large diameter three blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximize your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat.
90-300+hP engines with a 4.75” gearcaseENGINE BRAND - 15 SPLINE PROP SHAFTS PART NO.Evinrude®/Johnson®: V4 with V6 large gearcase: 100HP commercial, 120HP (‘85), 130HP (‘95-’96), 140HP (‘85), Pleasure (‘95+): 115HP, 130HP /H.O.: 150, 200, 225, 250HPE-TEC (includes pontoon series - not for E-TEC G2): (25” shaft)90HP, 115HP, 130HP (‘09-’10), 135HP to 300HP/V6: 135HP to 250HP/V8: 250HP to 300HP
TP-11500200
Evinrude® E-TEC® G2™: G2 Series Only: 150 to 300HP
TP-11501100
Honda®: BF115D, BF135, BF150, BF200 (‘02-’12), BF225 (‘02-’12)
TP-11500700
Honda®: BF200A ('13+), BF225A ('13+), BF250A ('12+)
TP-11500800
Johnson®: Use Express Mach3 OS series props only: 4 stroke: 200HP, 225HP
TP-11500700
Mercury® & Mariner®*: Note: 115HP ProXS CT Only; For ProXS & Verado w/ 1.25” prop shaft, use Mercury Solid Hub kit with the Turning Point Prop.EFI CT/SeaPro : 90 to150HP/ V6 & I6: 135 to 300HP/Verado 135 to 300HP/ OptiMax: 150, 200, 250HP
TP-11500100
Mercruiser®: (If propeller strikes trim tab, replace with Mercury part #822777A1) Alpha One and Bravo One (‘83+)
TP-11500100
OMC®: Cobra 800: 3.0 to 7.5L/King Cobra: 454, 502/Sea Drive: 2.0 to 4.0L
TP-11500200
Suzuki®: DT 2 stroke: 150HP to 225HP
TP-11500700
Suzuki®: Use Express Mach3 OS series props only: DF 4 stroke: 150 to 300HP
TP-11500700
Tohatsu®: BFT115, BFT150, BFT200, BFT225, BFT250
TP-11500800
Volvo® Penta SX & OMC SX Cobra: (19 spline) (‘94+): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives.
TP-11500400
Volvo® Penta AQ: (17 spline)USE 4 BLADES ONLY 200, 250, 270, 280, 290
TP-11501000
Yamaha®: 2 and 4 stroke: 150