catalogue · 2. technical inspection – checking functionality and security equipment final...

19
Catalogue of products

Upload: others

Post on 23-Jun-2020

1 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

Catalogueof products

Page 2: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

KÜHTREIBER, Ltd. is a Czech company, which is engaged in development, production and sale of welding equipment and accessories. The company was founded in 1998 and initially worked primarily in the domestic market, which has built up an extensive distribution and sales network. The gradual development of the company and expanding range led to an expansion into other European countries and then managed to get important business partners in other continents.

Main objectives of the company, which is a satisfied customer, is achieved pursuit of maximum machine availability, fast delivery of goods, perfect service and sales support, including counselling and constant expansion of production and business facilities.

The company today produces more than 80 types and variants of welding machines KIT, KITin and FĒNIX for MMA, TIG and MIG | MAG welding. It deals with the sale of welding torches, protective masks, spare parts, pressure reducing valves, electrodes and other accessories. Great emphasis is a placed on the quality of products and components. All the key components of machines are manufactured in its own factory in the Czech Republic, where final assembly also takes place.

TRANSFORMERS MANUFACTURE DEPARTMENTOne of the most important parts of the welding machine is the transformer. KÜHTREIBER Company, Ltd. produces transformers and other winding elements itself in its own premises. This became independent on suppliers and has confidence in quality and design.

First and foremost, it is a special welding transformers, which design and technical parameters must meet the requirements for safety and durability, and especially with them can achieve excellent welding properties. The company KÜHTREIBER Ltd. also manufactures transformers for the power supply control devices of machines, such as contactors, displacements, fans, gas preheating, cooling etc.

PCB DEPARTMENTAchieving and maintaining high levels of product KÜHTREIBER depends both on the used components that are delivered directly from the renowned European manufacturers, but particularly on technologies used in manufacturing. KÜHTREIBER Company, Ltd. It is equipped with modern automatic line for printed circuit boards (PCB). Manufacturers of these devices are reputable and famous companies DEK and Yamaha. The chosen concept of regular production (in-line) ensures the highest level of product quality, high production capacity and reduce the need for human labour. Mounting of classic components and non-standard SMD components is carried out at workplaces equipped with hand-shaping devices and manipulators. Of course there are inter-operational checks, including optical inspection, commissioning and testing of individual parts and finished products.

ASSEMBLY DEPARTMENTManufacture of machinery takes place at several workplaces of the assembly line, which are defined by each phase assembly machine. This ensures high productivity and minimal errors.

After the assembly phase, the welding machine enters the final phase of the inspection, which takes place in two stages.1. Visual inspection – mechanical damage to the paint, strain on various parts of the machine2. Technical inspection – checking functionality and security equipment

Final assembly of inverters is done manually according to established rules and instructions, each used for mounting plate contains information about the final test the functionality of the PCB. Assembled inverter has a settings depending on required parameters and detailed testing at final inspection.

METAL FABRICATION DEPARTMENTCases and covers of welding machines and practically all metal components are also manufactured within the company KÜHTREIBER Ltd. For this purpose, the company is equipped with modern CNC machines TRUMPF and DURMA. For further processing are used conventional and CNC machine tools.

Production takes place in various stages, such as punching, bending, spot welding, grinding and final assembly. The company is fully self-sufficient in the production phase of welding machines and is ready to react quickly to customer requests. 21

SINGLE-PHASE UNDERVOLTAGE PORTABLE INVERTERS FĒNIX 5

SINGLE-PHASE INVERTERS 7

THREE-PHASE DIGITAL PORTABLE INVERTERS 11

SINGLE-PHASE PORTABLE MIG/MAG INVERTERS 14

THREE-PHASE MIG/MAG WELDING MACHINES 15

WIRE FEEDERS 27

ACCESSORIES AND SPARE PARTS 29

CONTENTABOUT COMPANY 2

OVERVIEW OF FUNCTIONS 3

KÜHTREIBER IN THE WORLD

Page 3: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

OVERVIEW WELDING METHODS

• theeasiesttolearn,thepossibilityofautomation

• highweldingspeeds–high productivity• providesbettercontrolonthinnermaterials

• providescleanerweldswithoutaslag• thepossibilityofcoredwire• minimalspatter

• more suitable for windy, outdoorconditions

• tolerant during welding on dirty orcorrodedmetal

MIG/MAGMetalInertGas/MetalActiveGas

• provides high quality and precisewelds

• highly aesthetic and good lookingwelds

• TIGACallowsexcellentweldingofaluminumanditsalloys

• thepossibilityofautomatization• TIGPULSEallows lessdeformationwhen welding thin materials; lessheatinputintotheweldmaterial

TIGTungstenInertGas

MMAManualMetalArc

43

FUNCTIONS IN KÜHTREIBER MACHINES

AAEAutoArcExtinction–automaticarcextinction(seepictureonpage4–StartandfinishingofweldingprocessTIGLA).

ANTI STICKIncaseofshort-circuit(sticking)oftheelectrodeauto-maticallyreducestheweldingcurrent–thispreventstheelectrodefrombeingignitedandfacilitatesitstearing.

LIFT ARCEnsuresproperignationofweldingarcbytouching(notnecessarytoscratch)→lowabrasionofwolframeelectrode.

JOB MODEPossibilityofstoringownweldingprograms.

ARC FORCEAnelectronicfunctionensuringthearcstability.

BURN BACKBurning-outofthewiretothecontacttipafterfinishingwelding.

EASY PULSETheautomaticoptimalpulsesettingaccordingtooneparameter–suitableforthelessexperiencedwelders.

CYCLEPossibilityofswitchingbetweentwoadjustedvaluesofcurrent–eligibleformaterialswithdifferentthickness.

DOWN SLOPEFillingacrateratfinishingwelding.

DPCDynamicpowercontrol–dynamicreductionofmachinepowerinput.

EASY USEEasyandwellarrangedcontrol.

END CURRENTSettingofendcurrent.

FEED BACKAutomaticstabilisationofwirefeederspeed.

GENERATOREligibletooperatefromamobilepowersource (generator).

HOT STARTFunctionthatbooststhecurrentduringstartingtomakestrikinganarceasier.

PULS BALANCEDeterminesratebetweenhighcurrrentandbackcurrentofpulsation.

REMOTE CONTROLWiredup-downremotecontrol.

RESTORE PROGRAMSimpleandfastrestorationofallcharacteristicstothebasicstate–presetfromtheproduction.

SOFT START MMAPreventsoutageofcircuitbreakers.

SOFT STARTThesoftstartofweldingprocess.Itenablestosetatimeofgradualgrowthofwirefeederspeedduringweldingstart.

SPOT PULSFunctionsforspotandintervalwelding.

TEST GAS Functiontestgas.

TIG PULSForweldingofthinmaterials;loweringofbrought-inheatintoweldedmaterial→lowerlevelofdeformation.

UP-DOWNAnUP-DOWNremotecontrolinthehandleofthetorch.

V. R. D.ProtectivesystemMMA-themaximumunloadedopencircuitvoltageacrosstheoutputterminalsisreducedto15V–inverterisoff;whentheelectrodeismovedtowardtheworkpiecetheinverterautomaticalyturnson.

SYNERGICPreprogrammedautomaticsettingofweldingparameters.

Function LOGIC:• Displaying values of welding currentandweldingvoltage

• Displaying parameters during the welding with wire feeder speed regulationbyapoten- ciometer or buttons on the torch. Control SETTING informsyouaboutwirefeeder speedinm/min.

MICROPROCESSOR CONTROL ENABLES

• AdjustmentofmethodsMMA/TIGLTandTIGHF

• TimeadjustmentoffunctionHOTSTARTinMMA

• Weldingcurrentadjustment

• SwitchingonfunctionPULS

• AdjustmentofprimaryandweldingcurrentinTIGPULS

• SwitchingonthefunctionDOWNSLOPEanditsadjustment

• Adjustmentofendweldingcurrent

• Adjustmentofpre-gas/post-gas

• Setting of two welding currents in the function CYCLE

4-stroke,whichcanbeswitchedduringtheweldingbythe

mainbuttononthetorch

START AND FINISH OF WELDING PROCESS TIG LA

1 Approaching the wolfram electrode to the weldedmaterial.2 Touchingthewolframelectrodeandtheweldingmaterial.3 Removing thewolframelectrode and ignition ofwelding arcwiththeuseofLIFTARC–verylowabrasionofthewolframelectrodebytouch.

4Weldingprocess.5 FinishingoftheweldingprocessandsctivatingDOWNSLOPEis carriedoutwhenyou lift thewolframelectrode forabout 8–10mmfromtheweldedmaterial.

6 Re-approaching–welding current is decreased for adjusted

periodoftimeonadjustedvalueofendcurrent(e.g.10A) –fillingacrater.

7 Finishing of the welding process. The digital controll switchestheweldingprocessautomaticallyoff–functionAAE.

(AtmachineKITinTIGLA,KITinHFaFĒNIX)

Page 4: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

10-200 A10-190 A10-150 A

110/100%110 A/100% 140 A/100% 140 A/100%

165 A/60%155 A/60%125 A/60%

Code 51225 51347 51348

Welding method MMA/TIG MMA/TIG MMA/TIG

Input power 50/60 Hz [ V ] 1×230 (-40%; +15%) 1×230 (-40%; +15%) 1×230 (-60%; +15%)

Protection – slow [ A ] 16 20 20

Welding current range [ A ] 10 – 150 10 – 190 10 – 200

Duty cycle 100 % (40 °C) [ A ] 110 140 140

Duty cycle 60 % (40 °C) [ A ] 125 155 165

Duty cycle (40 °C) [ A ] 150 (25%) 190 (15%) 200 (40%)

Mains current/input 60 % [ A/kVA ] 16/3.6 19,5/4.5 20/4.6

Open circuit voltage [ V ] 88 88 88

Ingress Protection IP 23 S IP 23 S IP 23 S

Cable panel socket 10–25 35–50 35–50

Recomended type of torch KTB 17V KTB 17V KTB 17V

Dimensions [ mm ] 225 × 112 × 315 225 × 112 × 380 225 × 112 × 425

Weight [ kg ] 4.1 4.7 5.5

SINGLE-PHASE PORTABLE UNDERVOLTAGEINVERTERSFOR WELDING BY MMA AND TIG METHOD

in electrical network. FĒNIX 200 PFC is able to work ofthe same protection from the network and to get against conventional welding machines up to 40% more power (eg where themachine ejects the fuse at 150A, FĒNIX 200PFCweldedwithoutproblemsoncurrentof200A).

Themachinehasafunctiontolimittheoutputcurrentbywhichonecanworkwiththemachineinlowprotectioninthenetwork.FĒNIXPFCispredestinedforuseongenerator, longextensioncableandusingtheweakbreakers.

FĒNIX200PFCprovidesexcellentarcstability,simpleandeasytounderstandcontrols,remotecontroloptions,performanceandequipment.Machinecontrolsareintegratedintothebuttonkeypad,whichincreases the accuracy and reliability of themachine control. Welding machine FĒNIX 200 PFC is designed for the most demandingusers.

PROPERTIES AND EQUIPMENT• May be used with power generator with min. output of 3.5kVA(withA.V.R.feature)• Optional use of up to 200 m (2.5 mm2 cross-section) extensioncable• Itispossibletoweldwhile60%(from90V)voltagedecline (evenwithcontinuosdecline) innetwork–withelectrode Ø1.6;2.0;2.5;3.2;4.0mm• Connectionofaremotecontroltoregulateweldingcurrent• Thermalprotectionwithlightindicator

Method MMA o Function HOT START enables easier ignition of stickelectrodes o ANTI STICK function for easier detachment of a stickingelectrode o FunctionARCFORCEensuresarcstability o V.R.D. feature=MMAsafetysystem;themaximum unloaded open circuit voltage across the output terminalsisreducedto15V o Function of limiting the output/input current to prevent lossofcircuitbreakers(optionofsimulation ofanyprotectionfrom5to30A) o Function SOFT START MMA (Prevents outage of circuitbreakers)

Method TIG o Manualarcignitionusing–LIFTARC o FunctionPULSE o DOWN SLOPE (deceleration time on end current) o ENDCURRENT o Functiontolimittheoutputcurrent

USAGEHigh performance, excellent welding properties a ability tocopewith40%,actually60%(FĒNIX200PFC)undervoltage machines are ideal for use in assembly, in maintenance operations,repairs,heavyindustry,etc.

65

FĒNIX 160 – 200DESCRIPTIONFĒNIX160–200arecompact,portablelow-voltageMMAandTIGweldingmachines.Design isbasedon inverter-microcontroller technologyusingaplanartransformer.

FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer.Showexcellent resultseither innormaloperationor inuseongeneratorandalsoon longextensioncables.Theideal characteristic of arc ensures its excellent stability evenif fluctuating voltage in public electrical network occurs or while using long extension cable (up to 200 m of length). Machinecontrolsareintegratedintothebuttonkeypad,whichincreasestheaccuracyandreliabilityofthemachinecontrol.

Further advantages of FĒNIX machine are high performanceandefficiency,easytouseandthepossibilityofremotecontrolconnection.

PROPERTIES AND EQUIPMENT• May be used with power generator with min. output of 3.5kVA(withA.V.R.feature)• Optional use of up to 200 m (2.5 mm2 cross-section) extensioncable• Enablesweldingwhennetworkvoltagedropsbyasmuchas 40%(from140V)usingelectrodeØ1.6;2.0;2.5mm• Connectionofaremotecontroltoregulateweldingcurrent• Thermalprotectionwithlightindicator• Under-voltage/over-voltageindicators

Method MMA o FunctionHOTSTARTfeatureenableseasierignitionof stickelectrodes o ANTI STICK function for easier detachment of a stickingelectrode o Function ARC FORCE feature ensures arc stability. o V.R.D. feature =MMA safety system; 15V at output terminalsinrestingstate o FunctionSOFTSTARTMMA(Preventsoutageofcircuit breakers) Method TIG o Manualarcignitionusing–LIFTARC o FunctionPULSE o DOWNSLOPE(decelerationtimeonendcurrent) o ENDCURRENT

FĒNIX 200 PFCDESCRIPTIONFĒNIX 200PFC is a compact, portable, under-voltagewelding machineforMMAandTIGwelding,whichisequippedwithPFC(PowerFactorCorrection).

FĒNIX is equiped by high-tech using energy-saving inverter microprocessor technology PFC with the using of a planar transformer, whichmodulates the input stream so that it has analmostidealsinusoidalwaveform,whichprovidesupto92% efficiencyofthemachine.PFCtechnologyensuresstableweldingprocesswithfluctuating voltage of electrical network, even when using long extension cables or using electric generators, without any apparent difference inthearc.Themachine isabletooperatefrom90V

Page 5: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

87

Code 50040 / 51301 50094 50207 50281 50381 50466 / 51327 50113 50095 50112

Input power 50/60 Hz [ V ] 1×230 1×230 1×230 1×230 1×230 1×230 1×230 1×230 1×230

Protection – slow [ A ] 16 20 16 16 20 20 16 16 20

Welding current range [ A ] 10 – 160 10 – 180 10 – 150 10 – 150 10 – 170 10 – 170 10 – 150 10 – 170 10 – 180

Duty cycle 100 % [ A ] 95 110 125 125 125 125 95 95 110

Duty cycle 60 % [ A ] 120 150 140 140 140 140 120 120 150

Duty cycle at max. I [ % ] 45 45 45 45 25 25 30 30 45

Mains current/input 60 % [ A/kVA ] 16/3.6 20/4.7 19/4.3 19/4.3 19/4.3 19/4.3 16/3.6 16/3.6 20/4.7

Open circuit voltage [ V ] 88 88 88 88 88 88 88 88 88

Ingress Protection IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S

Cable panel socket 10–25 / 35–50 35–50 10–25 10–25 10–25 10–25 / 35–50 35–50 35–50 35–50

Recommended type of torch KTB 17V KTB 17V KTB 17V KTB 17V KTB 17V KTB 17V KTB 17 KTB 17 KTB 17

Dimensions [ mm ] 245 × 143 × 330 245 × 143 × 350 220 × 143 × 310 220 × 143 × 310 220 × 143 × 310 220 × 143 × 310 245 × 143 × 390 245 × 143 × 390 245 × 143 × 390

Weight [ kg ] 5.7 6.2 5.5 5.5 5.9 5.9 6.6 6.7 7.1

FEATURES (Description on page 3)

HOT START adjustable adjustable adjustable

ARC FORCE

ANTI STICK

V.R.D.

LIFT ARC

TIG PULS

FREQUENCY OF THE PULSATION

DOWN SLOPE

END CURRENT

AAE

CYCLE

FOUR-STROKE

Electromagnetic gas valve

Strap belt for easy carrying

MR = small gladhand 10–25VR = big gladhand 35–50

SINGLE-PHASEINVERTERS

10-150 A 10-150 A10-170 A 10-170 A10-150 A10-180 A10-160 A 10-170 A 10-180 A

125 A/100%110 A/100%95 A/100% 95 A/100%125 A/100%125 A/100%125 A/100% 110 A/100%95 A/100%

150 A/60%120 A/60%120 A/60%140 A/60%140 A/60%140 A/60%140 A/60%150 A/60%120 A/60%

Page 6: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

DESCRIPTIONWeldinginvertermachinesKITin165and190aredesignedforindustrialandprofessionaluse.Machines KITin165and190areelectronicweldingcurrentsourceswithrapidregulation,characterizedbyexcellentweldingproperties,robustdesign,highperformance,reliabilityandlowweight.

Thesemachinesaredesignedforoperationwithanemphasisonmaximumutilityvalueatanaffordableprice.Allmachinesareequippedwithaconnectorforconnectingtheremotecontrolwithregulationbypotentiometer.

DESCRIPTIONKITin150and170areinvertermachinesdesignedforindustrialandprofessionaluse.Theyareconstructedwiththeuseofhigh-frequencytechnologywithfastregulationofweldingcurrent.Machinesarenotedwithhighloading(125Aat100%),performance,lowelectricalpowerconsumptionandexcellentweldingproperties.Theyarelightweight,smallsizeandmostlyreliable.

Thesemachinesareintendedforoperation,wheretheemphasisisonmaximumvalueandhighperformance atacompetitiveprice.Allmachinesareequippedwithaconnectorforconnectingtheremotecontrolwithregulationbypotentiometer.

DESCRIPTIONKITin150TIGLAand170TIGLAareprofessional inverterweldingmachinesofthethirdgeneration designedwiththeuseofIGBTtechnologywiththefastmicroprocessorregulation.Machinesarenotedwithhighdutycycle(125Aat100%),performanceandcomfortcontrols.

Thecontrolsofmachineare integrated in thenewgenerationofkeyboard that replaces thestandard mechanicalsolutions.Thisincreasesthethereliabilityandprecisionofmachinesetup.

PROPERTIES AND EQUIPMENT• Thelowenergyconsumptionandhighperformance• ExcellentweldingpropertiesinMMA• CanweldwithTIG• Lowweightandsmalldimensions• Reliableconstruction• Thermalprotectionwithasignallight• Highloadfactors

PROPERTIES AND EQUIPMENT• Thelowenergyconsumptionandhighperformance• ExcellentweldingpropertiesinMMA• CanweldwithTIG• Lowweightandsmalldimensions• Reliableconstruction• Thermalprotectionwithasignallight• Highloadfactors

PROPERTIES AND EQUIPMENT• Thelowenergyconsumptionandhighperformance• ExcellentweldingpropertiesinMMA• CanweldwithTIG• Lowweightandsmalldimensions• Reliableconstruction• Thermalprotectionwithasignallight• Highloadfactors• Cleardisplayshowingthesettingvalue• TIGendcurrent• TIGLIFTARC

PROPERTIES AND EQUIPMENT• Easydisplayshowingsettingvalue• Simpleandcleargraphicswithbigbuttons• Adjustablepre/postgas.• TIGUP/DOWNSLOPE• TIGHF• Connector for the remote control UP-DOWN inthehandleofthetorchforTIG;theremotecontrol UP-DOWNforMMA

USAGEThey are the right choice for the use inmanu-facturing, assembling, in metal production, bymaintenanceorathome.

USAGEThey are the right choice for the use inmanu-facturing, assembling, in metal production, bymaintenanceorathome.

USAGEThey are the right choice for the use inmanu-facturing, assembling, in metal production, bymaintenanceorathome.

DESCRIPTIONKITin1500HF–1900HFareinverterweldingmachinesdesignedwiththeuseofhighfrequencytechnology withthefastmicroprocessorregulation.MachinesarefullyequippedanddesignedforweldingmethodTIGwithtouchlessstartHF(HighFrequency).ByusingofmethodTIGweldedstainlesssteel,copperanditsalloys.

Thecontrolsofmachineare integrated in thenewgenerationofkeyboard that replaces thestandard mechanicalsolutions.Thisincreasesthereliabilityandprecisionofmachinesetup.

USAGEKITin1500HF–1900HFaretherightchoiceforuseinmanufacturing,assembling,inmetalproduction,bymaintenanceorathome.

CO

NT

RO

L PA

NE

LSC

ON

TR

OL

PAN

ELS

CO

NT

RO

L PA

NE

LSC

ON

TR

OL

PAN

ELS

KIT

in 1

90

KIT

in 1

70K

ITin

16

5K

ITin

150

KIT

in 1

50 T

IG L

AK

ITin

170

TIG

LA

KIT

in 1

500

HF

KIT

in 1

700

HF

KIT

in 1

90

0 H

F

109

MMA

TIG

TIGMMA

HOT START PULSE

IwIt

%

SLOPE

END

MET

SET

Page 7: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

5-200 A

200 A/100%

5-250 A

220 A/100%

250 A/80%

5-300 A

220 A/100%

300 A/40%

5-200 A

200 A/100%

5-250 A

220 A/100%

250 A/80%

5-200 A 5-250 A 5-300 A

200 A/100% 220 A/100%220 A/100%

300 A/40%250 A/80%

5-300 A

220 A/100%

300 A/40%

1211

Code 51186 51214 51140 51189 51215 51141 51212 51213 51139

Welding method MMA/TIG-LA MMA/TIG-LA MMA/TIG-LA MMA/TIG-HF MMA/TIG-HF MMA/TIG-HF MIG/MAG MIG/MAG MIG/MAG

Input power 50/60 Hz [ V ] 3×400 + 10% - 10% 3×400 + 10% - 10% 3×400 + 10% - 10% 3×400 + 10% - 10% 3×400 + 10% - 10% 3×400 + 10% - 10% 3×400 + 10% - 10% 3×400 + 10% - 10% 3×400 + 10% - 10%

Protection – slow [ A ] 16 16 25 16 16 25 16 16 25

Duty cycle 100 % (40 °C) [ A ] 200 220 220 200 220 220 200 220 220

Duty cycle (40 °C) [ A ] – 250 (80%) 300 (40%) – 250 (80%) 300 (40%) – 250 (80%) 300 (40%)

Output current range [ A ] 5 – 200 5 – 250 5 – 300 5 – 200 5 – 250 5 – 300 5 – 200 5 – 250 5 – 300

Output voltage range [ V ] – – – – – – 8 – 30 8 – 30 8 – 30

Maximum current [ A ] 300 330 380 300 330 380 220 250 300

Peak welding current [ A ] – – – – – – > 500 > 500 > 500

Output voltage [ V ] 65 65 65 65 65 65 65 65 65

Ingress Protection IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S

Diameter of electrodes [ mm ] 1.5 – 5.0 1.5 – 5.0 1.5 – 5.0 1.5 – 5.0 1.5 – 5.0 1.5 – 5.0 – – –

Material of wire – Steel – Aluminium – Stainless steel

– – – – – –

Wire feeder speed [ m/min ] – – – – – – 1 – 20 1 – 20 1 – 20

Cable panel socket 35–50 35–50 35–50 35–50 35–50 35–50 35–50 35–50 35–50

Dimensions [ mm ] 430 × 190 × 530 430 × 190 × 530 430 × 190 × 530 430 × 190 × 540 430 × 190 × 540 430 × 190 × 540 430 × 270 × 595 430 × 270 × 595 430 × 270 × 595

Weight [ kg ] 19 19 19 19.7 19.7 19.7 27 27 27

FEATURES (Description on page 3)

SOFT START

HOT START

DOWN SLOPE

UP SLOPE

PULS

PULS – BALANCE

CYCLE

TWO-STROKE / FOUR-STROKE / / / / / /

LIFT ARC

ANTI STICK

ARC FORCE

V.R.D.

DPC

SOFT POWER ON

JOB MODE

SYNERGIC

Touch free ignition

Remote control connector

Gas valve

Pocket for accessories

THREE-PHASE DIGITAL PORTABLE INVERTERS

Page 8: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

140 A/60%120 A/60%

100 A/100% 120 A/100%

20-170 A/MIX 20-190 A/MIX

SINGLE-PHASE PORTABLE MIG/MAGINVERTERS

FOR WELDING BY MMA, TIG AND MIG/MAG METHODTHREE-PHASE PORTABLE DIGITAL INVERTERS

DESCRIPTIONPortable welding machines KITin 220–320MMA/HF/MIGaredesignedassmall,lightandpowerfuldigitalthree-phaseinverters.

Newgenerationdigital controlsensurenot only optimal settings of thewelding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved asubstantiallyhigherqualityofweldjointand simplification of welding process. A significant benefit is achieved in new functions,whichhelptokeepthewelding arcinanoptimalworkingcharacteristics. Due to this arc control technology excellentresultsmaybeachievedevenbylessexperiencedwelders.

Digitalandprogressivehardwaredesignenabledreductioninweight,dimensionsandconsequentlyalsoinpriceofthenewKITin inverters.The construction of theperformance part itself is excessive to ensure reliability, highperformanceandhighdutycycle.

KITinMIG are supplied with 4-roll wire feeder,whichhasdriftedbothmain andpressurerollsforsmoothusagewithsteel,stainless steel and aluminiumwire. Rollshavediameter30mm.

CHARACTERISTIC• excellentweldingproperties• high performancewhilemaintaining

compact dimension of the machine• highpowersurplus• simpleandintuitivemachinecontrol

andparameterssetting

EQUIPMENT• digital II. generation controls for

welding quality enhancement andsimplification; ensures continuousreadjustment of welding charac- teristics to actual conditions duringtheweldingprocess

• the option for updating of controlsoftware

• digitalvolt-amperemeter• fan on demand – the fan runs only

whennecessary–savingtheenergyconsumption

• remotecontrolconnector• massiveandcompactdesign• practical deposit box for welding

cables and electrodes at the side cover (exceptKITin 220–320MIG)

MMA METHOD ACCESSORIES(MACHINES KITin 220 – 320 MMA a HF)• ARCFORCEfunctionforarcstabili-

zationwiththeoptionofsettingtheintensity

• HOTSTART function foreasierarcignition

• ANTI STICK function for easier detachment of a sticking electrode

• V.R.D.andSTARTCONTROLprotec-tionforassuringworksafety

• DPCandSOFTPOWERONfunctionforproblem-freeweldingonapublicelectricitynetwork

• It ispossibletouserutile,basicandaluminumelectrodes

TIG METHOD ACCESSORIES(MACHINES KITin 220 – 320 HF)• settingofpre-gas/post-gas,current

up-slope,down-slope,2/4cycle,etc.• PULSwelding• PULS BALANCE for pulse welding• touch-freeignition• CYCLEfunction• 20 memory positions for own

programs

MIG METHOD ACCESSORIES(MACHINES KITin 220 – 320 MIG)• continuous tension and wire move-

mentspeedregulation• SYNERGIC function – automatic

settingofweldingparameters• SOFT START and HOT START

functions settings (for aluminumwelding)

• continuoussettingofwireburn-back• continuoussettingofarcdynamics

KITin MMA and HF – practical pocket for welding cables, electrodes and

other accessories.

Transport carts and other accessories for these machines can be found

on the page 29.

10

PROPERTIES AND EQUIPMENT• lowpowerconsumptionofenergyand

highperformance• excellentweldingquality• easy setting ofwelding parameters

(weldingvoltageandwirefeedspeed are set at the same time by one controlelementaccordingtostrengthof the welded material, the secondcontrol element is for soft voltageadjustmentwhichdeterminesthearclength

• lowweightandsmallsize• reliableconstruction• thermalprotection• highdutycycles• place for a coil with wire Ø up to

200mm• possibletousewireØ0.6–0.8mm• possibletousetubewire• torchMB15AGispriceincluded(only

fortypeKITin2040MIG)

DESCRIPTIONKITin 2040 MIG, KITin 2040 MIGEURO and KITin 2080 MIG EURO are portable, single-phase,weldingmachinesforweldingbyMIG/MAGmethod.Theyare suitable for professional and amateurusing. KITin 2040MIG – with fixed torch andgroundcable.

KITin 2040 MIG EURO a 2080 MIGEURO–witheuroconnector(torchisnot includedinthistype).

Weldingmachinewas constructedwithusing the latest technology, it is small,lightweightandwiththehighefficiency.There is plastic handle to carry it. It is suitable to operate from generator (mobile power supply), for example forbuilding. Machine allows easy settingsofweldingparameters.

USAGEMachinesaretherightchoicetobeusedinproduction, industrial construction, metal- working,maintenanceorworkshops.

14

Transport cart K7102Code 51151

13

• the option of saving up to 20 own weldingprograms

• the option to use 5 kg and 15 kg wirespool

• highperformanceandsturdywirefeeder4×4

USAGEHigh performance, excellent welding propertiesandsolidconstructionpredestine these machines for use in manufacturing andassemblyfirms,maintenancefacilities,repairshopsandheavyindustryaswell.

Code 51064 51147 51259

Input power 50/60 Hz [ V ] 1×230 V ± 15 % 1×230 V ± 15 % 1×230 V ± 15 %

Protection – slow [ A ] 16 16 16

Welding current range [ A ] 10 – 150 (CO2), 20 – 170 (Ar+CO2) 20 – 150 (CO2), 20 – 170 (Ar+CO2) 20 – 170 (CO2), 20 – 190 (Ar+CO2)

Duty cycle 35 % [ A ] 150 150 190

Duty cycle 60 % [ A ] 120 120 140

Duty cycle 100 % [ A ] 100 100 120

Mains current/input 60 % [ A/kVA ] 12/4.6 12/4.6 22/5

Output voltage range [ V ] 22 – 31 22 – 31 22 – 31

Ingress Protection IP 23 S IP 23 S IP 23 S

Connect of welding cables fixed EURO EURO

Wire feed speed [ m/min ] 1 – 11 1 – 11 1 – 12

Dimensions [ mm ] 470 × 200 × 310 470 × 200 × 310 470 × 200 × 310

Weight [ kg ] 14 13 13

Page 9: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

40-190 A 30-215 A 30-280 A30-250 A 50-350 A 50-350 A 50-450 A 50-350 A 50-450 A

135 A/100% 170 A/100% 190 A/100% 235 A/100% 240 A/100% 240 A/100% 310 A/100% 240 A/100% 290 A/100%

390 A/60%280 A/60%430 A/60%280 A/60%280 A/60%270 A/60%210 A/60%190 A/60%150 A/60%

1615

Code – STANDARD ( ST ) – PROCESSOR ( PR )

5115651438

5115751299

5115851339

5114851431

5114951298

511634000wproc

511505000wproc

511914000wsproc

511875000wsproc

Input power 50/60 Hz [ V ] 3×400 3×400 3×400 3×400 3×400 3×400 3×400 3×400 3×400

Protection – slow [ A ] 16 16 16 25 25 25 32 25 32

Welding current range [ A ] 40 – 190 30 – 215 30 – 250 30 – 280 50 – 350 50 – 350 50 – 450 50 – 350 50 – 450

Output voltage range [ V ] 19.0 – 40 20.0 – 36.5 17.7 – 39.2 19.2 – 41.9 22.0 – 51.0 22.0 – 51.0 18.8 – 61.2 22.0 – 51.0 18.0 – 62.0

Duty cycle 100 % [ A ] 135 (at 40 °C) 170 (at 40°C) 190 (at 40°C) 235 (at 40°C) 240 (at 40°C) 240 (at 40°C) 310 (at 40°C) 240 (at 40°C) 290 (at 40°C)

Duty cycle 60 % [ A ] 150 190 210 270 280 280 430 280 390

Duty cycle [ A ] 190 (30%) 215 (40%) 250 (45%) 280 (40%) 350 (35%) 350 (35%) 450 (35%) 350 (35%) 450 (35%)

Mains current/input 60 % [ A/kVA ] 7.3/5.3 10.5/6.7 9.6/7 14.8/10.6 17.3/12.8 17.3/12.8 30/21.6 17.3/12.8 30/21.6

Winding Cu Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al Cu/Al

Number of adjustment points 10 10 10 20 40 40 40 40 40

Digital volt-ampere meter only PROCESSOR only PROCESSOR only PROCESSOR yes yes yes yes yes yes

Wire feed 4-roll 4-roll 4-roll 4-roll 4-roll 4-roll 4-roll 4-roll 4-roll

Standard equip roll 0.8 – 1.0 0.8 – 1.0 0.8 – 1.0 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2

Wire feed speed [ m/min ] 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20

Material of wire – Steel, Stainless steel – Aluminium – Cored wire

Ingress Protection IP 21 S IP 21 S IP 21 S IP 21 S IP 21 S IP 21 S IP 21 S IP 21 S IP 21 S

Dimensions [ mm ] 655 × 486 × 884 655 × 486 × 884 902 × 510 × 890 902 × 510 × 890 902 × 510 × 890 940 × 688 × 939 940 × 688 × 939 1265 × 688 × 925 1265 × 688 × 925

Weight [ kg ] 56 65 75 88 93 125 165 133 172

FEATURES (Description on page 3)

2-STROKE / 4-STROKE ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

BURN BACK PR PR PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

EASY USE ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

PRE-GAS / POST-GAS PR PR PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

SPOT PULS ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

FEED BACK PR PR PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

UP-DOWN PR PR PR PR PR PR PR PR PR

SOFT START PR PR PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

GENERATOR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

TEST GAS ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR ST, PR

MIG/MAG WELDING MACHINES

Page 10: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

CO

NT

RO

L PA

NE

LSC

ON

TR

OL

PAN

ELS

STANDARD

PROCESSOR

STANDARD

PROCESSOR

CO

NT

RO

L PA

NE

LS

STANDARD

PROCESSOR

CO

NT

RO

L PA

NE

LS

STANDARD

PROCESSOR

KIT

410

0 P

RO

CE

SS

OR

KIT

30

00

PR

OC

ES

SO

R

KIT

30

00

S

TAN

DA

RD

KIT

350

0 –

410

0 S

TAN

DA

RD

DESCRIPTIONKIT 2200 – 2400 are professional welding machines equippedwithahigh-poweredtransformer,robustwirefeeder with an efficient motor, EURO connector andelectroniccontrol.

The main advantages of machines KIT are excellent welding properties, 10-speed voltage regulation, thepossibilityofhighloadmachineswithnewconstruction,moderndesign,reliabilityandthesimplecontrol.

DESCRIPTIONKIT 3000 – 3500 – 4100 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connectorandelectroniccontrol.

The main advantages of machines KIT are excellent welding qualities, 10-grade, 20-grade or 40-grade voltage control, high power, high duty cycle, high reliabilityandeasyoperating.

DESCRIPTIONKIT4000W–5000Wareprofessionalweldingmachines equippedwithahigh-poweredtransformer,robustwirefeeder with an efficient motor, EURO connector andelectroniccontrol.

The main advantages of machines KIT are excellent weldingqualities,40-gradevoltagecontrol,highpower, high duty cycle, high reliability and easy operating.

DESCRIPTIONKIT 4000WS – 5000WS are professional welding machines equipped with a high-powered transformer, robustwirefeederwithanefficientmotor,EUROconnector andelectroniccontrol.

The main advantages of machines KIT are excellent weldingqualities,40-gradevoltagecontrol,highpower, high duty cycle, high reliability and easy operating.

USAGEThey are the right choice for the use in manufacturing, assembling,inmetalproduction,bymaintenanceorathome.

The machines are designed for plants with the highest levelsofperformance,reliabilityandsimplecontrol.

USAGEMachines are designed for medium andheavy-machineryproduction,maintenanceplantsandmetal-production.

Themachinesaredesignedforplantswiththehighestlevelsofperformance,reliabilityandsimplecontrol.

USAGEMachines are the right choice for industry and heavy industry,maintenanceplantsandmetalworking.

The machines are designed for plants with the highest levelsofperformance,reliabilityandsimplecontrol.

USAGEAllmachinesaredesignedforheavymachineryproduction,construction, metal-production, ship-production or mainte-nanceplants.Themachinesaredesignedforplantswiththehighestlevelsofperformance,reliabilityandsimplecontrol.

OPTIONAL ACCESSORIESWelding torch, auto-darkening welding mask, pressure controlvalve,rollsandothersonthepage29–34.

OPTIONAL ACCESSORIESWelding torch, auto-darkening weldingmask, pressure control valve, rolls andothersonthepage29–34.

OPTIONAL ACCESSORIESWelding torch, auto-darkening welding mask, pressurecontrolvalve,rollsandothersonthepage29–34.

OPTIONAL ACCESSORIESWelding torch, auto-darkening welding mask, reduction valve,rollsandotheronthepage29–34.

STA

ND

AR

D

STA

ND

AR

DP

RO

CE

SS

OR

SO

UR

CE

STA

ND

AR

D/

PR

OC

ES

SO

R

WIR

E F

EE

DE

RS

TAN

DA

RD

WIR

E F

EE

DE

RP

RO

CE

SS

OR

18

PR

OC

ES

SO

R

STANDARDEQUIPMENT

KIT 3500 / 4100

STANDARDEQUIPMENT

KIT 3000

17

PROCESSOR

STANDARDEQUIPMENT

STANDARDEQUIPMENT

STANDARDEQUIPMENT

Page 11: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

30-195 A40-190 A 30-250 A30-195 A 30-280 A 30-350 A 30-350 A 30-450 A

80 A/100% 120 A/100% 140 A/100% 170 A/100% 220 A/100% 260 A/100% 260 A/100% 310 A/100%

430 A/60%310 A/60%300 A/60%260 A/60%200 A/60%160 A/60%150 A/60%95 A/60%

2019

Code – STANDARD ( ST ) – PROCESSOR ( PR ) – SYNERGIC ( SY )

502755039450427

502785039550428

505555055750558

5070250804

502175039650429

500325059350307

502855057350577

50571 / 5027950574 / 5057550578 / 50548

Input power 50/60 Hz [ V ] 3×400 3×400 3×400 3×400 3×400 3×400 3×400 3×400

Protection – slow [ A ] 16 16 16 16 25 25 25 32

Welding current range [ A ] 40 – 190 30 – 195 30 – 195 30 – 250 30 – 280 30 – 350 30 – 350 30 – 450

Output voltage range [ V ] 19 – 39 19 – 34 19 – 34 17.7 – 39.2 17 – 38 18 – 40 18 – 40 20 – 50

Duty cycle 100 % [ A ] 80 120 140 170 220 260 260 310

Duty cycle 60 % [ A ] 95 150 160 200 260 300 310 430

Duty cycle [ A ] 190 (15%) 195 (25%) 195 (25%) 250 (30%) 280 (30%) 350 (30%) 350 (35%) 450 (45%)

Mains current/input 60 % [ A/kVA ] 5/3.4 6.8/4.6 7.5/5.2 9.5/6.6 12.3/8.6 15.3/10.6 15.3/10.6 25/17.3

Winding Cu Cu Cu Cu/Al Cu Cu Cu Cu

Number of adjustment points 10 10 10 10 20 40 40 40

Digital volt-ampere meter only PROC. and SYN. only PROC. and SYN. only PROC. and SYN. only PROCESSOR yes yes yes yes

Wire feeder 2-roll 2-roll 2-roll 2-roll 2-roll 4-roll 4-roll 4-roll

Standard equip roll 0.6 – 0.8 0.8 – 1.0 0.8 – 1.0 0.8 – 1.0 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2

Wire feeder speed [ m/min ] 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20

Material of wire – Steel, Stainless steel – Aluminium – Cored wire

Ingress Protection IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21

Dimensions [ mm ] 645 × 488 × 791 645 × 488 × 791 645 × 488 × 791 738 × 490 × 782 806 × 490 × 822 806 × 490 × 822 872 × 620 × 880 872 × 620 × 880

Weight [ kg ] 52 62 62 68 93 101 135 158

FEATURES (Description on page 3)

2-STROKE / 4-STROKE ST, PR, SY ST, PR, SY ST, PR, SY ST, PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

BURN BACK PR, SY PR, SY PR, SY PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

RESTORE PROGRAM SY SY SY SY SY SY SY

EASY USE ST, PR, SY ST, PR, SY ST, PR, SY ST, PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

JOB MODE SY SY SY SY SY SY SY

PRE-GAS / POST-GAS PR, SY PR, SY PR, SY PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

SPOT PULS ST, PR, SY ST, PR, SY ST, PR, SY ST, PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

FEED BACK PR, SY PR, SY PR, SY PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

UP-DOWN PR, SY PR, SY PR, SY PR PR, SY PR, SY PR, SY PR, SY

SOFT START PR, SY PR, SY PR, SY PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

GENERATOR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

TEST GAS PR, SY PR, SY PR, SY PR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

COMPACT WELDING MIG/MAG MACHINES

Page 12: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

DESCRIPTIONKIT 309 are professional welding machines equippedwithahigh-poweredtransformer,robustwirefeederwith anefficientmotor,anEUROconnectorandelectronicscontrol.

ThemainadvantagesofmachineKITareexcellentwelding skills, 10-grade voltage control, high power, high dutycycle,highreliabilityandeasyoperating.

DESCRIPTIONKIT305–405areprofessionalweldingmachinesequippedwith a high-powered transformer with copper primaryandsecondarywinding,robustall-metalwirefeederwith an efficientmotor, an EURO connector and electronicscontrol.

ThemainadvantagesofmachineKITareexcellentwelding skills, 20-grade, or 40-grade voltage control, highpower, high duty cycle, high reliability and very easyoperatingofversionsPROCESSORandSYNERGIC.

DESCRIPTIONKIT400W–500–500Wareprofessionalweldingmachinesequippedwithahigh-poweredtransformerwithcopperprimaryandsecondarywinding, robustall-metalwirefeederwithanefficientmotor,anEUROconnectorandelectronicscontrol.

Themainadvantagesareexcellentweldingskills,40-gradevoltagecontrol, high power, high duty cycle, high reliability and very easy operating of versionsPROCESSORandSYNERGIC.

USAGEAll machines are designed for medium and heavy machinery production,maintenanceplantsandmetal-producing.

In the case of Synergicmachine there is, in addition, automatic adjustmentofweldingparametersandapossibilityofprogramming. Standardequipment8programmesforstandardsteels(2typesofgasand4Øofwire).Apossibilityofsimplerecordingofyourownprogrammes40–60weldingparameters.

USAGEMachines are designed for medium and heavy-machinery production,maintenanceplants,metal-productionand locksmiths.

USAGEAll machines are designed for medium and heavy machinery production,maintenanceplantsandmetal-producing.

DESCRIPTIONKIT205–225–245areprofessionalweldingmachines.ThemainadvantagesofmachineKITareexcellentwelding capabilities, 10-grade voltage control, high power, highduty cycle, high reliability and very easy operating of versionsPROCESSORandSYNERGIC.

In the case of Synergicmachine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmesforstandardsteels(2typesofgasand3Ø

USAGEAllmachinesaretherightchoicefortheuse inthemanufacture, assembly,inmetalproduction,bymaintenanceorathome.

OPTIONAL ACCESSORIESWeldingtorch,auto-darkeningweldingmask, reductionvalve, rollsandotheronthepage29–34.

OPTIONAL ACCESSORIESWeldingtorch,auto-darkeningweldingmask, reductionvalve, rollsandotheronthepage29–34.

OPTIONAL ACCESSORIESWeldingtorch,auto-darkeningweldingmask, reductionvalve, rollsandotheronthepage29–34.

OPTIONAL ACCESSORIESWeldingtorch,auto-darkeningweldingmask, reductionvalve, rollsandotheronthepage29–34.

STANDARD

PROCESSOR

SYNERGIC

STANDARD

PROCESSOR

STANDARD

PROCESSOR

SYNERGIC

STANDARD

PROCESSOR

SYNERGIC

CO

NT

RO

L PA

NE

LS

STANDARDEQUIPMENT

STANDARDEQUIPMENT

KIT 305

STANDARDEQUIPMENT

STANDARDEQUIPMENT

KIT 405

STANDARDEQUIPMENT

CO

NT

RO

L PA

NE

LSSTA

ND

AR

DS

YN

ER

GIC

PR

OC

ES

SO

R

SYNERGICmachinesalsohaveautomaticadjustmentofwelding parametersandthepossibilityofprogramming.Standardequipmentis8programsforcommonsteels(2typesofgasand4Øwire),thepossibilityofsimplerecordingofyourownprograms–160weldingparameters.

21

CO

NT

RO

L PA

NE

LSSTA

ND

AR

DP

RO

CE

SS

OR

STA

ND

AR

DP

RO

CE

SS

OR

CO

NT

RO

L PA

NE

LSSTA

ND

AR

DP

RO

CE

SS

OR

SY

NE

RG

ICS

YN

ER

GIC

22

ofwire).Apossibilityofsimplerecordingofyourownprogrammes40–60weldingparameters.

SYNERGIC

PROCESSOR

Synergic

Processor

Synergic

TheWvariantincludesaliquidcoolingcircuitforaweldingtorch.

Page 13: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

220 A/100% 260 A/100% 310 A/100% 310 A/100%260 A/100% 260 A/100% 480 A/100%

30-350 A30-280 A 30-350 A 30-350 A 30-450 A 30-450 A 50-700 A

600 A/60%430 A/60%430 A/60%310 A/60%310 A/60%300 A/60%260 A/60%

2423

Code – STANDARD ( ST ) – PROCESSOR ( PR ) – SYNERGIC ( SY )

505615056251379

504055074051272

5058050582

400ssyn

502845058451342

5058150583

500ssyn

503255061350924

5002050977

600wssyn

Input power 50/60 Hz [ V ] 3×400 3×400 3×400 3×400 3×400 3×400 3×400

Protection – slow [ A ] 25 25 25 25 32 32 63

Welding current range [ A ] 30 – 280 30 – 350 30 – 350 30 – 350 30 – 450 30 – 450 50 – 700

Output voltage range [ V ] 17 – 38 18 – 40 18 – 40 18 – 40 20 – 50 20 – 50 19 – 51

Duty cycle 100 % [ A ] 220 260 260 260 310 310 480

Duty cycle 60 % [ A ] 260 300 310 310 430 430 600

Duty cycle [ A ] 280 (30%) 350 (30%) 350 (30%) 350 (30%) 450 (30%) 450 (30%) 700 (30%)

Mains current/input 60 % [ A/kVA ] 12.3/8.6 15.3/10.6 15.3/10.6 15.3/10.6 25/17.3 25/17.3 32/21.0

Winding Cu Cu Cu Cu Cu Cu Cu

Number of adjustment points 20 40 40 40 40 40 40

Digital volt-ampere meter yes yes yes yes yes yes yes

Wire feeder2/4 roll – by the type

of wire-feeder2/4 roll – by the type

of wire-feeder4-roll 4-roll 4-roll 4-roll 4-roll

Standard equip roll 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2 1.0 – 1.2

Wire feeder speed [ m/min ] 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20

Material of wire – Steel, Stainless steel – Aluminium – Cored wire

Ingress Protection IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21

Dimensions [ mm ] 1351 × 490 × 845 1351 × 490 × 845 1263 × 620 × 871 1263 × 620 × 871 1263 × 620 × 871 1263 × 620 × 871 1438 × 650 × 957

Weight [ kg ] 109 119 145 145 165 165 234

FEATURES (Description on page 3)

2-STROKE / 4-STROKE ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

BURN BACK ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

RESTORE PROGRAM SY SY SY SY SY SY SY

EASY USE ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

JOB MODE SY SY SY SY SY SY SY

PRE-GAS / POST-GAS ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

SPOT PULS ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

FEED BACK ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

UP-DOWN PR, SY PR, SY PR, SY PR, SY PR, SY PR, SY PR, SY

SOFT START PR, SY PR, SY PR, SY PR, SY PR, SY PR, SY PR, SY

GENERATOR ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY ST, PR, SY

WELDING MIG/MAG MACHINES WITH REMOVABLE WIRE FEEDER

Page 14: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

DESCRIPTIONKIT 400 S – 500 S are professional weldingmachinesequippedwithahigh-powered transformerwith copperprimary and secondary winding, robust all-metal wirefeederwithanefficientmotor, anEUROconnectorandelectronicscontrol.

The main advantages of machine KIT are excellent welding skills, 40-grade voltage control, high power,highduty cycle, high reliabilityandveryeasyoperating ofversionsPROCESSORandSYNERGIC.

USAGEAllmachinesaredesignedformediumandheavymachineryproduction,construction,metal-production,ship-productionormain-tenanceplants.

OPTIONAL ACCESSORIESConnecting cables, welding cables, auto-darkeningweldingmaskandotheronthepage29–34.

STANDARD

PROCESSOR

SYNERGIC

DESCRIPTIONKIT305S–405Sareprofessionalweldingmachinesequippedwithahigh-powered transformerwith copperprimary and secondary winding, robust all-metal wirefeederwithanefficientmotor,anEUROconnectorandelectronicscontrol.

The main advantages of machine KIT are excellent welding skills, 20-gradeor40-grade voltage control, high power, high duty cycle, high reliability andvery easy operating of versions PROCESSOR and SYNERGIC.

USAGEMachines are designed for industry andheavyindustry,maintenanceplants,metal--production, for locksmiths, ship-produc-tion,bymaintenanceorathome.

OPTIONAL ACCESSORIESConnecting cables, welding cables, auto-darkeningweldingmaskandotheronthepage29–34.

STANDARD

PROCESSOR

SYNERGIC

STA

ND

AR

DP

RO

CE

SS

OR

SY

NE

RG

IC

DESCRIPTIONKIT400WS–500WSareprofessionalweldingmachinesequippedwithahigh-poweredtransformerwithcopperprimaryandsecondarywinding,robustall-metalwire feederwithanefficientmotor,anEUROconnectorandelectronicscontrol.

The main advantages of machine KIT are excellent welding skills, 40-gradevoltagecontrol,highpower,highdutycycle,highreliabilityandveryeasyoperatingofversionsPROCESSORandSYNERGIC.

DESCRIPTIONKIT 600 WS are professional welding machines equipped with ahigh-poweredtransformerwithcopperprimaryandsecondarywinding,robustall-metalwirefeederwithanefficientmotor,anEUROconnectorandelectronicscontrol.

The main advantages of machine KIT are excellent welding skills, 40-gradevoltagecontrol,highpower,highdutycycle,highreliabilityandveryeasyoperatingofversionsPROCESSORandSYNERGIC.

USAGEAllmachinesaredesignedformediumandheavymachineryproduction,construction,metal-production,ship-productionormain-tenanceplants.

USAGEAllmachinesaredesignedformediumandheavymachineryproduction,construction,metal-production,ship-productionormaintenanceplants.

OPTIONAL ACCESSORIESConnecting cables, welding cables, auto-darkeningweldingmaskandotheronthe page29–34.

OPTIONAL ACCESSORIESConnecting cables, welding cables, auto-darkeningweldingmask and other on the page 29–34.

STANDARD

PROCESSOR

SYNERGIC

STANDARD

PROCESSOR

SYNERGIC

GUSAG – SWING SPRING LOADED ARM OF THE TORCH

WIR

E F

EE

DE

R

CO

NT

RO

L PA

NE

LS

SO

UR

CE

SO

UR

CE

SO

UR

CE

SO

UR

CE

STA

ND

AR

DP

RO

CE

SS

OR

SY

NE

RG

IC

STA

ND

AR

DP

RO

CE

SS

OR

SY

NE

RG

IC

CO

NT

RO

L PA

NE

LS

WIR

E F

EE

DE

RS

TAN

DA

RD

PR

OC

ES

SO

RS

YN

ER

GIC

STA

ND

AR

DP

RO

CE

SS

OR

SY

NE

RG

IC

STANDARDEQUIPMENT

STANDARDEQUIPMENT

STANDARDEQUIPMENT W

IRE

FE

ED

ER

CO

NT

RO

L PA

NE

LSSTA

ND

AR

DP

RO

CE

SS

OR

SY

NE

RG

IC

WIR

E F

EE

DE

RS

TAN

DA

RD

PR

OC

ES

SO

RS

YN

ER

GIC

STA

ND

AR

DP

RO

CE

SS

OR

SY

NE

RG

IC

CO

NT

RO

L PA

NE

LS

2625

PROCESSOR

SYNERGIC

PROCESSOR

SYNERGIC

PROCESSOR

SYNERGIC

PROCESSOR

SYNERGIC

TheWvariantincludesaliquidcoolingcircuitforaweldingtorch.

Page 15: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

for machineKIT 4000

a 5000 WS

for machineKIT 4000

a 5000 WS

Coil holder for tube wire 32 kg

Code 10097

KIT 4-4 KIT 4-4 are wire feeder units withpossible usage of the wire spoolup to 32 kg. The wire feeder has independentpowersupply24/110/230V. Further, the machines may be fittedwithhigh-powerweldingcurrent source. The wire feeder KIT 4-4 modifiedbysuchmannermaybeusedfortheweldingcurrentsourceswithpermanent voltage on the outputterminals.TheKIT4-4machinesarenormallydeliveredinfullequipment.

KIT 5-2 KIT 5-2 is designed for PUSH PULL systems.Usedinoperationwhereitis necessary toextend theweldingtorchuptoseveralmeters.

KIT 2-2/4 variant E with plastic wire coil cover. It is small, reliable and light wire feeder with integratedcontrolpanelforgripingofallfunctionofmachine.Fullequipedvariant.

KIT 2-2/4 variant P with all-metal cover of the wire feederandthewirecoil.Thewirefeederissmall,reliableandlight.However,themachineisofrobustconstructionandthereforeitisintended for heavy load operations.Thewire feederKIT 2-2/4P is fittedwithall adjustingfunctions–fullequippedvariant.

KIT 2-2/4 P/E variant W withthe installationofthe liquid-cooledtorch.

KIT 3-2/4WKIT3-2andKIT3-4(W)arethewirefeeders with integratedhigh-performancewatercoolingoftheweldingtorch.Themachines areofrobustandreliabledesignandarefullyequipped.Theyareintendedtorefitoftheolderandnewermachines.

THE EQUIPMENT OF THE WIRE FEEDERS STANDARD• Easy and reliable control of welding

parameters• Adjustable functionspre-gas/post-gas,

wirelet-outandburn-back• Thecontroloffeederwiththefeedback• Functionsofthewireinsertionandgastest,

4-stroke/2-stroke,spotweldingandpulsing

THE EQUIPMENT OF MACHINES STANDARD• Easy and reliable control of welding

parameters• Adjustable functionspre-gas/post-gas,

wirelet-outandburn-back• Analogue feedback control of the wire

feederspeeds• Digital volt-amperemeterwithmemory• Functionsofthewireinsertionandgastest,

4-stroke/2-stroke,spotweldingandpulsing

THE EQUIPMENT OF WIRE FEEDERS AND MACHINES PROCESSOR• Equalregulationofwirefeederfrom1to

20m/minwithfinecontrolafter0.1m/min.

• Digitalindicatorofthewirefeedspeed• TheconnectoroftheremotecontrolUP/

DOWN• Digitalvoltampermeterwithmemory–

functionsHOLD• FunctionEASYUSE• FunctionRESTOREPROGRAM• FunctionSOFTSTART• Functionsofthewireinsertionandgas

test,4-stroke/2-stroke,spotweldingandpulsing

THE EQUIPMENT OF WIRE FEEDERS AND MACHINES SYNERGIC• The same equipment as PROCESSOR• FunctionSYNERGIC–automaticadjustment

ofweldingparameters• Standardequipmentupto8programmes

forstandardsteels• A possibility of programme correction of

SYNERGICmachine• Apossibilityofsimplerecordingofyour

ownprogrammes

KIT2-2/4P(W)withpracticalboxforspareparts

KIT 2-2 P /W KIT 2-2 E /W KIT 2-4 P /W KIT 2-4 E /W KIT 2-4 E W KIT 3-2 W KIT 3-4 W KIT 4-4 KIT 5-2 KIT 5-4 WCode – STANDARD – PROCESSOR – SYNERGIC

50025 / 5058650564 / 50588

on request

50439 / 5058750565 / 50589

on request

50024 / 5000350566 / 50590

on request / 50923

50077 / 5007850567 / 5059151381 / 51136

51199on request

50039––

50034––

5002250731

50035––

51340––

Input power 50/60 Hz [ V ] 24 24 24 24 24 48 48 24/110/230 24 24

Protection – slow [ A ] 10 10 10 10 10 10 10 10/1.5/0.7 10 10

Welding current range [ A ] 30 – 700 30 – 700 30 – 700 30 – 700 30 – 700 30 – 700 30 – 700 30 – 700 30 – 700 30 – 700

Wire feeder 2-roll 2-roll 4-roll 4-roll 4-roll 2-roll 4-roll 4-roll 2-roll 4-roll

Wire feeder speed [ m/min. ] 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 1 – 20 – –

Material of wire – Steel, Stainless steel– Aluminium – Cored wire

Ingress Protection IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21

Dimensions [ mm ] 433 × 515 × 640 365 × 480 × 670 433 × 515 × 640 365 × 480 × 670 435 × 505 × 725 556 × 445 × 665 556 × 445 × 665 556 × 445 × 665 140 × 190 × 200 521 × 370 × 345

Weight [ kg ] 20 17 20 17 20 34 34 21 5.5 15.6

2827

CONNECTING CABLES SOURCE – WIRE FEEDER Cross-section of the power cable 95 mm2

CONNECT. CABLES STANDARD PROCESSOR SYNERGIC

Cable 2 m 10482 10729 11365

Cable 5 m 10484 10731 11881

Cable 10 m 10486 10806 on request

Cable 15 m 10488 10816 on request

Cable 20 m 10503 11211 on request

Cable 25 m 10692 10959 on request

Cable 30 m on request on request on request

Cable 2 m liquid 10483 10690 11366

Cable 5 m liquid 10485 10672 11413

Cable 10 m liquid 10487 10673 11458

Cable 15 m liquid 10489 10661 11426

Cable 20 m liquid 10502 on request on request

Cable 25 m liquid 10668 10846 10907

Cable 30 m liquid 11642 on request on request

WIRE FEEDERS

for machine KIT 4000

a 5000 WS

STANDARD STANDARDSTANDARDPROCESSORSYNERGIC

STANDARD PROCESSORPROCESSORSYNERGIC

PROCESSORSTANDARD

PUSH-PULL PUSH-PULL

Page 16: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

K 315W, K 5150WLightweightandcompactliquidcoolingoftheweldingtorch.Theyareequippedwithamainswitchandpressureswitchforindicationofcoolantflow.

Code 50004 51133

Input power 50/60 Hz 230 V 230 V

Protection – slow 6.3 A 6.3 A

The cooling capacity 850 W 850 W

Maximum pressure 0.4 MPa 0.4 MPa

Ingress Protection IP 21 IP 21

Dimensions 449 × 334 × 224 mm 690 × 270 × 235 mm

Weight 18 kg 18,6 kg

K 315W K 5150W

Code 51137

TRANSPORT CART K7100 (formachine

KITin220–320MMA/HF/MIG)

Code 51042

TRANSPORT CARTK7101 (formachine

KITin220–320MMA/HF/MIG)

COIL HOLDERCode 30096

COIL REDUCTION6-arm – Code 322888-arm – Code 33049

COIL HOLDERCode 30009

COIL HOLDER FOR TUBE WIRE WR4 – 32 kg

Code 32287

MOTORsmall – Code 30362

big – Code 30460

STRETCHER OF WIREWS3 3-Roll. – Code 000780029WS5 5-Roll. – Code 000780030

TRANSPORT CARTS

COOLING UNIT

ACCESSORIES AND SPARE PARTS

Code Type of roll 0 Wire

30347 Roll Ø 32/40 0.6 – 0.8

31328 Roll Ø 32/40 0.8 – 1.0

31329 Roll Ø 32/40 1.0 – 1.2

32039 Roll Ø 32/40 1.2 – 1.4

32278 Roll Ø 32/40 1.2 – 1.6

32159 Roll Ø 32/40 1.4 – 1.6

31871 Roll Ø 32/40 Al 0.8 – 1.0

31872 Roll Ø 32/40 Al 1.0 – 1.2

32160 Roll Ø 32/40 Al 1.2 – 1.4

31870 Roll Ø 32/40 Al 1.2 – 1.6

32091 Roll Ø 32/40 Tube wire 1.0 – 1.2

32265 Roll Ø 32/40 Tube wire 1.2 – 1.6

32147 Roll Ø 32/40 Tube wire 1.4 – 1.6

32161 Roll Ø 32/40 Tube wire 1.6 – 2.4

32040 Roll Ø 32/40 Tube wire 2.0 – 2.4

32104 Roll Ø 32/40 Tube wire 2.4 – 2.8

32162 Roll Ø 32/40 Tube wire 2.8 – 3.2

ROLL Ø 32/40 mmfor wire feeder CWF 510, CWF 610

BASIC SPARE PARTS OF INDIVIDUAL SHIFTS

WIRE FEEDER Code Code Code Code Code

CWF 300 000780023 000780056 – 000780048 000780058

CWF 610 000780024 000780046 – 000780035 000780020

CWF 410 000780065 000780056 – 000780074 000780058

CWF 510 000780026 000780046 000780039 000780035 000780020

WIRE FEEDER PLATE

A SCREW OF THE CLAMPING ROLLS

A COVER OF THE COGGED WHEEL

THRUST OF PULLEYS + THE SCALE

A LEAD-IN CABLE PLASTIC

ROLL Ø 22/40 mmfor wire feeder CWF 300

Code Type of roll 0 Wire

30348 Roll Ø 22/40 0.6 – 0.8

31330 Roll Ø 22/40 0.8 – 1.0

31331 Roll Ø 22/40 1.0 – 1.2

32173 Roll Ø 22/40 1.2 – 1.4

32174 Roll Ø 22/40 1.4 – 1.6

32004 Roll Ø 22/40 Al 0.8 – 1.0

31893 Roll Ø 22/40 Al 1.0 – 1.2

32175 Roll Ø 22/40 Al 1.2 – 1.4

32176 Roll Ø 22/40 Al 1.4 – 1.6

32106 Roll Ø 22/40 Tube wire 0.8 – 1.0

32122 Roll Ø 22/40 Tube wire 1.0 – 1.2

32177 Roll Ø 22/40 Tube wire 1.4 – 1.6

32149 Roll Ø 22/40 Tube wire 1.6 – 2.4

32128 Roll Ø 22/40 Tube wire 2.0 – 2.4

32179 Roll Ø 22/40 Tube wire 2.4 – 2.8

ROLL Ø 22/30 mmfor wire feeder CWF 410

*Beforeyouordermakesurethatbothdimensionsoftherollareincompliancewithyouroriginalroll.

Code Type of roll 0 Wire

32002 Roll Ø 22/30 0.6 – 0.8

31340 Roll Ø 22/30 0.8 – 1.0

31840 Roll Ø 22/30 1.0 – 1.2

32282 Roll Ø 22/30 1.2 – 1.6

31868 Roll Ø 22/30 Al 1.0 – 1.2

31867 Roll Ø 22/30 Al 1.0 – 1.8

31689 Roll Ø 22/30 Al 1.2 – 1.6

32307 Roll Ø 22/30 Tube wire 1.0 – 1.2

32308 Roll Ø 22/30 Tube wire 1.4 – 1.6

32309 Roll Ø 22/30 Tube wire 1.6 – 2.4

32310 Roll Ø 22/30 Tube wire 2.0 – 2.4

Aluminium (Al)

Steel, Stainless

Tube wire

SOURCE OF GAS HEATING

Code 51036

SOURCEOF GAS HEATING AND SWITCHBOARD

Code 51138

SOURCE OF GAS HEATING

29

ROLLS FOR WIRE FEEDERS

Aluminium (Al)

Steel, Stainless

Tube wire

Aluminium (Al)

Steel, Stainless

Tube wire

Typical use of these rolls: KIT 305, 405, 400, 500, 600*

Typical use of these rolls: KIT 305, 3500, 405, 4100, 400, 4000, 500, 5000, 600*

40,0

32,0

CWF 510Code 30472

CWF 610Code 30471

Typical use of these rolls: KIT 205, 225, 245, 309*

40,0

22,0

CWF 300Code 30997

Typical use of these rolls: KIT 205, 225, 245, 2200, 2400, 3000*

Typical use of these rolls: KITin 220 – 320 MIG*

CWF 410, Code 32314

CWF 410Code 32264

30,0

22,0

Page 17: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

WELDING TORCHES MIG/MAG

3231

Code Type Length for DC 60% MIX

05220344 KTB 15 3 m 130 A

05220345 KTB 15 4 m 130 A

05220346 KTB 15 5 m 130 A

05220347 KTB 24 3 m 200 A

05220348 KTB 24 4 m 200 A

05220349 KTB 24 5 m 200 A

05220350 KTB 25 3 m 180 A

05220351 KTB 25 4 m 180 A

05220352 KTB 25 5 m 180 A

05220353 KTB 36 3 m 250 A

05220354 KTB 36 4 m 250 A

05220355 KTB 36 5 m 250 A

TORCH AIR COOLED

KTB 15AIR COOLED

Code Type Length Cable socket

05220310 KTB 9 4 m 35–50

05220311 KTB 9 8 m 35–50

05220312 KTB 9 FX 4 m 35–50

05220313 KTB 9 FX 8 m 35–50

05220315 KTB 17 4 m 35–50

05220316 KTB 17 8 m 35–50

05220317 KTB 17 FX 4 m 35–50

05220318 KTB 17 FX 8 m 35–50

05220319 KTB 17 Up-Down 4 m 35–50

05220320 KTB 17 Up-Down 8 m 35–50

05220321 KTB 17 Potentiomet. 4 m 35–50

05220322 KTB 17 Potentiomet. 8 m 35–50

05220323 KTB 17 FX Up-Down 4 m 35–50

05220324 KTB 17 FX Up-Down 8 m 35–50

05220325 KTB 17 Valve 4 m 10–25

05220326 KTB 17 Valve 4 m 35–50

05220327 KTB 26 4 m 35–50

05220328 KTB 26 8 m 35–50

05220329 KTB 26 Potentiomet. 4 m 35–50

05220330 KTB 26 Potentiomet. 8 m 35–50

05220331 KTB 26 Up-Down 4 m 35–50

05220332 KTB 26 Up-Down 8 m 35–50

05220333 KTB 26 FX 4 m 35–50

05220334 KTB 26 FX 8 m 35–50

05220335 KTB 26 FX Potentio. 4 m 35–50

05220336 KTB 26 FX Potentio. 8 m 35–50

05220337 KTB 26 Valve 4 m 35–50

TORCH AIR COOLED

TORCH WITH VALVE

TORCH WITH THE REMOTE CONTROL UP-DOWN

TORCH WITH BUTTON

More information in the Catalogue of accessories. More information in the Catalogue of accessories.

WELDING TORCHES TIG

ANTI-SPATTER PRODUCTS

Code ANTI-SPATTER PRODUCTS

055190001 Paste KTB 340 (340 ml)

035770002 Spray KTB 400 (400 ml)

035770003 / 035770009 Liquid KTB 1000 / 1000 S (1 l) with diffuser

035770004 / 035770010 Liquid KTB 1000 / 1000 S (5 l)

035770005 / 035770011 Liquid KTB 1000 / 1000 S (10 l)

035770006 / 035770012 Liquid KTB 1000 / 1000 S (20 l)

035770007 / 035770013 Liquid KTB 1000 / 1000 S (200 l)

035770008 / 035770014 Liquid KTB 1000 / 1000 S (900 l)

The products are intended for protection of current tips, torch nozzles and also welded material. It prevents deposition and melting of metal particles produced during spatter of arc welding.

KTB 24AIR COOLED

KTB 25AIR COOLED

TORCH WITH FLEXIBLE NECK – FX

Code Type Length for DC 100% MIX

05220356 KTB 401 4 m 350 A

05220357 KTB 401 5 m 350 A

05220358 KTB 501 3 m 410 A

05220359 KTB 501 4 m 410 A

05220360 KTB 501 5 m 410 A

05220518 KTB 240W 3 m 270 A

05220519 KTB 240W 4 m 270 A

05220520 KTB 240W 5 m 270 A

TORCHLIQUID

COOLED

Code Type Length Cable socket

05220338 KTB 18 4 m 35–50

05220339 KTB 18 8 m 35–50

05220340 KTB 18 Potenciometr 4 m 35–50

05220341 KTB 18 Potenciometr 8 m 35–50

05220342 KTB 18 FX 4 m 35–50

05220343 KTB 18 FX 8 m 35–50

05220482 KTB 20 4 m 35–50

05220483 KTB 20 8 m 35–50

05220484 KTB 20 FX 4 m 35–50

05220504 KTB 24W 4 m 35–50

05220505 KTB 24W 8 m 35–50

TORCHLIQUID

COOLED

SPARE PARTS

KTB 36AIR COOLED

KTB 240WLIQUID COOLED

KTB 501LIQUID COOLED

KTB 401LIQUID COOLED

SPARE PARTS

KTB 9AIR COOLED

KTB 17AIR COOLED

KTB 18LIQUID COOLED

KTB 20LIQUID COOLED

KTB 26AIR COOLED

KTB 24WLIQUID COOLED

TORCH WITH THE BUTTON AND POTENTIOMETER

Page 18: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

ACCESSORIES

REDUCTION VALVE

WELDING MASK

GAS BOTTLES

Code GAS BOTTLES

7108 Gas bottle 2 l, 200 Bar

035770001 Gas bottle 8 l, 150 Bar Ar

035770002 Gas bottle 6 kg, 150 Bar CO2

Code REDUCTION VALVE

25000 Oxygen

25100 Acetylene

25200 Propane butane, without Mano.

25300 Propane butane, 1 Manometer

25350 Air

25450.CO2 CO2, with Flowermeter, 1 Mano.

25450 Argon, with Flowermeter, 1 Mano.

25500.CO2 CO2, 2 Manometers

25500 Argon, 2 Manometers

25590.CO2 CO2, MICRO MEI

25590 Argon, MICRO MEI

Gas bottle2 l

Gas bottleArgon, 8 l

Gas bottleCO2, 6 kg

MIG Pliers KÜHTREIBERCode – 014220001

3433

GUSAG

Code REMOTE CONTROL

10499 for KITin, plastic, 10 m

10241 for KITin, metal, 10 m

10611 for KITin HF, plastic, UP-DOWN, 10 m

10612 for KITin HF, metal, UP-DOWN, 10 m

Code WELDING CABLES

10102 3 m, 16 mm2, 10–25

10103 5 m, 16 mm2, 10–25

10402 3 m, 25 mm2, 10–25

10104 5 m, 25 mm2, 10–25

for KITin with small gladhand

Code WELDING CABLES

10201 3 m, 25 mm2, 35–50

10233 5 m, 25 mm2, 35–50

10163 3 m, 35 mm2, 35–50

10633 5 m, 35 mm2, 35–50

for KITin with big gladhand

METAL PLASTIC

for KITin

for KITin HF UP-DOWN

for KITin 150, 170, 165 – Code KUFR145.165

REMOTE CONTROL WITH CONNECTOR

ELECTRODES

Code WELDING ELECTRODES

044890001 Rutile Ø 3.2 x 350 mm, 4.5 kg

044890002 Rutile Ø 2.5 x 350 mm, 4.0 kg

044890003 Basic Ø 2.5 x 350 mm, 1.0 kg

044890004 Basic Ø 2.5 x 350 mm, 4.0 kg

044890005 Basic Ø 3.2 x 350 mm, 4.0 kg

044890006 Basic Ø 2.0 x 300 mm, 1.0 kg

WELDING CABLES

More information in the Catalogue of accessories.

Name WELDING MASK 800S WELDING MASK 725S

ADF shade range DIN 9-13 DIN 9-13

Speed of darkening 1/25000 s 1/16000 s

Supply Solar panels + battery 2× CR2450 Solar panels + battery 2× AAA

Weight 1020 g 440 g

EXTENTION CABLES FOR INVERTERS CROSS-SECTION OF THE CONDUCTOR 2,5 mm²LONG 25 m

Nr. – 33019

Gusag 2 mSwing spring loaded arm of the torch.Code 10634

TRANSFER GAS PIPE – ARGON

Designed for overflow of Argon from a large bottle.without a Manom. – Code 71003with a Manom. – Code 71002

CASE FOR INVERTERS AND ACCESSORIES

Durable waterproof case for FĒNIX inverters.Code KUFR FÉNIX

for KITin 190, 1500 HF, 1700 HF, 1900 HF – Code KUFRHF

Welding mask BLACK

Nr. – 005850021

Welding mask 800SNr. – 005850020

Welding mask with filtartion 800S FreFlow

Nr. – 005850043

Welding mask FĒNIX

Nr. – 005850024

Welding mask SKULL

Nr. – 005850025

Page 19: Catalogue · 2. Technical inspection – checking functionality and security equipment Final assembly of inverters is done manually according to established rules and instructions,

Catalogue 01/2018. Rights to modification reserved.

KÜHTREIBER, s.r.o. TYRŠOVA293,67522STAŘEČ,CZECHREPUBLICT:+420568851120,E:[email protected]:WWW.KUHTREIBER.CZ