catalogo schlage
TRANSCRIPT
PRIMUS®
High Security Cylinder System
®
On our cover, a Primus cylinder in the L-Series 03L in bright chrome.
High Security Cylinder System
The Primus® system offers a new dimension in high security cylinders and
key control. The system features a specially designed, patent protected key
which operates a choice of Underwriters Laboratories Listed 20-500 series,
Controlled Access 20-700 series and standard cylinders all in one integrated
key system. Primus cylinders are compatible with Schlage's A, AL, B, C/D,
E/B, H, L, L-Mediterranean, Mediterranean Collection® Elite Series, S, S200,
CL and PL-Series locks. Five security levels are available to provide the choice
on key control, convenience, and service which best meets the demands of the
installation.
P R I M U S
Administrative Forms 13
Cylinders 3-11
Exploded View: Interchangeable Core 2
Exploded View: Mortise Cylinder 2
How to Order 15
I.D. Cards 13
Interchangeable Core 8-9
Keying Kit 13
Keys 12
Lockout Cylinders 10
Performance Features 2
Replacement Cylinders 11
Security Levels 14
Special Cams 10
Specifications 1
Warranty 16
SpecificationsApplications: Fine homes, multi-family housing, retail stores,office and commercial space, schools, universities, hospitals,industrial sites, and wherever key control and physical securityare important concerns.
Certifications: 20-500 High Security cylinder – U.L. 437Listed; ANSI A156.5, 1992, Grade 1. 20-700 Controlled Accesscylinder – ANSI A156.5, 1992, Grade 1 Operational.
Finishes: Primus mortise and rim cylinders are available in 605, 606, 611, 612, 613, 625, 626, 629, and 630. Cylinderplug furnished in 606 and 626 only. Interchangeable coremortise and rim cylinder housings are available in 605, 606,611, 612, 613, 625, and 626. Cores are furnished in 606 and626 only. CL-Series cabinet locks are available in 605, 625 and626. Cylinder plugs furnished in 606 and 626 only. PL-Seriespadlocks are available in 452 (brass) finish only.
Keying: Primus allows integration with existing standard Schlagekey systems by utilizing a Primus key to operate both the 20-500and 20-700 series cylinders as well as Schlage standard pin tumblercylinders. Primus cylinders may be master or grandmaster keyed.Primus keys can be cut to operate all cylinders, while standardkeys will not even enter Primus cylinders.
Primus Cylinders can be used in conjunction withSITEMASTER 200® key control management software,for highly effective key control.
1
P R I M U S
2
P R I M U S
Springs
Top pins
Master pin
Bottom pins
Key/control key
Side-bit milling
Cylinder plug
5 Fingerpins
Exploded View - Interchangeable Core
Performance FeaturesThe Schlage Primus High Security cylinder is precision built to extremely close tolerances and thehighest standards of quality. These “dual-locking” cylinders consist of two independent lockingmechanisms, operated by a single specially designed Primus key. In addition to a standard 6 pintumbler mechanism there is a locking sidebar which is independently controlled by a set of 5fingerpins that interface with the side-bit milling (SBM) on the patented Primus key.
Primus cylinders are offered in two different versions. The 20-500 High Security series which isU.L. Listed and the 20-700 Controlled Access series which offers the same key control protectionwhen U.L. Listed cylinders are not necessary. Both series are fully compatible in application andcan be combined into the same masterkey system, along with other Schlage standard cylinders.For added flexibility, all Primus cylinders can be retrofitted into existing Schlage locks as wellas many competitive products.
Springs
Top pins
Master pin
Bottom pins
Key
Side-bit milling
Drill resistant plug
5 Fingerpins
Screw
Cam
Body
Sidebar
2 Sidebar springs
Fingerpin springs
Control pin
Body
Actuator pin
Actuator ring
Cap
Cap pin
Cap pin spring
Sidebar
2 Sidebar springs
Fingerpin springs
Exploded View - Mortise Cylinder
3
P R I M U S
CylindersPrimus 20-500 High Security Series, U.L. Listed20-500 Series cylinders are available in mortise, rim, and key-in-knob versions. They are distinguished by the presence of hard-ened components and hardened steel pins incorporated in thecylinder plug to protect it from drilling and other forcible meansof attack. These features in combination with the “dual-locking”technology of the Primus mechanism have passed the stringentlaboratory tests for drill and pick resistance in order to becomeUnderwriters Laboratories Listed (UL 437).
Primus 20-700 Controlled Access Series20-700 Series cylinders are available in mortise, rim, key-in-knob, and interchangeable core versions. The 20-700 series fea-tures the same high level of key control through the patent pro-tected Primus key at a substantial savings over the 20-500 series.It is designed for doors that require the ultimate in key control aswell as the significant pick resistance provided by the “dual-lock-ing” principle.
A-Series
ORBIT613
20-500 20-700 Door Range FunctionsSeries Series
20-542 20-742 1³⁄₈”- 2”
20-543 20-743 2”- 2¹⁄₂”
20-544 20-744 1³⁄₈” - 2¹⁄₂” B760, B763, B860, B863
20-545 20-745 1³⁄₈”- 2”
20-546 20-746 2”- 2¹⁄₂”
20-500 Dim 20-700 Dim DescriptionSeries Series
20-524 — 20-724 — 6 Pin unit – all except ORB
20-524 122 20-724 122 6 Pin unit – ORB (except A73 and A85)
20-524 149 20-724 149 6 Pin unit (A73)
20-500 20-700 DescriptionSeries Series
20-528 20-728 6 Pin cylinder unit
20-500 20-700 DescriptionSeries Series
20-529 20-729 6 Pin cylinder unit
20-530 20-730 6 Pin cylinder unit and housing, outside
20-531 20-731 6 Pin cylinder unit and housing, inside
B762, B862
B761, B764, B861, B864
B200/400-Series
B250PD 613
AL-Series
SATURN626
B700/800-Series
B760P 626
20-529 20-729 6 Pin cylinder unit
20-530 20-730 6 Pin cylinder unit and housing, outside
20-531 20-731 6 Pin cylinder unit and housing, inside
20-567 20-767
D-Series Knobs
PLYMOUTH626
20-500 20-700 DescriptionSeries Series
20-550 20-750 6 Pin cylinder unit
20-500 20-700 DescriptionSeries Series
20-548 20-748 6 Pin cylinder unit
20-560 20-760 6 Pin cylinder unit (C locks)
Cylinders
MURCHISON625
20-500 20-700 DescriptionSeries Series
H-Series
ORBIT605
E & E/B-Series
6 Pin cylinder unit(E-Series locks prior to 5/1/92)
20-500 Dim 20-700 Dim DescriptionSeries Series
20-529 — 20-729 — 6 Pin upper cylinder only
20-530 — 20-730 — 6 Pin upper cylinder with housing
20-524 — 20-724 —
20-524 122 20-724 122
6 Pin lower cylinder unit H153,H180 (except ORB)6 Pin lower cylinder unit H153,H180 (ORB)
4
P R I M U S
D-Series Levers
SPARTA605
Cylinders
L-Series
03L625
20-500 20-700 DescriptionSeries Series
20-552 20-752 Cylinder, sleeve
20-500 20-700 DescriptionSeries Series
20-587 20-787 Full face with compression ring: 11/8” - 13/4”
20-589 20-789 Concealed cylinder: 11/8” - 13/4” (606, 626)
20-593 20-793 Full face, less compression ring: 11/8” - 13/4”
20-500 20-700 DescriptionSeries Series
20-529 20-729 Cylinder, deadbolt
20-552 20-752 Cylinder, sleeve
S-Series
SATURN626
20-500 20-700 DescriptionSeries Series
20-553 20-753 Full face, less compression ring
Mediterranean Collection®
ME-Series Elite EntrancesMONACO625
S200-Series
FLAIR605
5
P R I M U S
6
P R I M U S
PL-Series Padlocks
CL-Series Cabinet LocksCL1000 CL2000
Primus 20-500 SeriesCabinet Door Locks
Primus 20-700 Series
CL1540PB CL1549PB
CL1740PB CL1749PB
CL1000PB CL1009PB
1” (std) 1/2”
Primus 20-500 SeriesCabinet Drawer Locks Primus 20-700 Series
CL2540PB CL2549PB
CL2740PB CL2749PB
CL2000PB CL2009PB
1/2” (std) 3/4”
Series Bolt
Series Bolt
PadlockSeries
PL1000
1³⁄₄” x 2¹⁄₈” x ³⁄₄”
PL2000
2” x 2¹⁄₈” x ³⁄₄”
PL3000
2¹⁄₄” x 2³⁄₈” x ⁷⁄₈”
6 Pin Cylinder
PL4000(I.C. core)
2” x 2¹⁄₄” x ⁷⁄₈”
InterchangeableCore Cylinder
PL3741
PL3742
47-740
PL4741
PL4742
PL4743
20-740
PL3541
PL3542
47-540
N/A
N/A
N/A
N/A
PL1541
PL1542
PL1543
PL1741
PL1742
PL1743
20-500Series
20-700Series
PL2541
PL2542
PL2543
PL2741
PL2742
PL2743
⁵⁄₁₆”
⁵⁄₁₆”
⁵⁄₁₆”
³⁄₈”
³⁄₈”
³⁄₈”
⁷⁄₁₆”
⁷⁄₁₆”
³⁄₈”
³⁄₈”
³⁄₈”
1¹⁄₈”
2”
3”
1¹⁄₈”
2”
3”
1¹⁄₈”
2”
1¹⁄₈”
2”
3”
³⁄₄”
³⁄₄”
³⁄₄”
³⁄₄”
³⁄₄”
³⁄₄”
¹⁵⁄₁₆”
¹⁵⁄₁₆”
³⁄₄”
³⁄₄”
³⁄₄”
Shackle DimensionsA B C
HARDENED
CB
A
Cylinders
7
P R I M U S
RIM CYLINDER20-510606
Description20-500Series
20-500
20-501
20-505
20-506
20-508
20-553
20-587
20-589
20-593
20-509
20-510
Series
Mortise
Rim
20-700Series
20-700
20-701
20-705
20-706
20-708
20-753
20-787
20-789
20-793
20-709
20-710
Standard cam, full face, with compression ring: 11/8” - 13/4”
Standard cam, full face, less compression ring: 11/8” - 13/4”
Corbin Russwin master ringreplacement cylinder: 11/8” - 13/4”
AR MS cam, full face, with 3/8”blocking ring: 11/8” - 13/4”
AR 4070 series cam, full face, lesscompression ring: 11/8” - 13/4”
ME Entrance cam, full face, lesscompression ring: 11/8”- 13/4”
L cam, full face, withcompression ring: 11/8” - 13/4”
L cam, concealed, lesscompression ring: 11/8” - 13/4”
L cam, full face, less compressionring: 11/8”- 13/4”
Nightlatch cylinder with no. 1 bar
Nightlatch cylinder with no. 2 bar
Cylinders
Mortise/Rim Series MORTISE CYLINDER20-500626
8
P R I M U S
Interchangeable Core
L-Series
73N625
S-Series
SATURN626
S200-Series
SATURN626
D-Series Lever
SPARTA626
D-Series Knob
ORBIT626
A-Series
ORBIT626
AL-Series
SATURN626
B200/400-Series
B462R (Discontinued)612
B700-Series
B762R626
H-Series Knob
ORBIT626
9
P R I M U S
Interchangeable Core
Mortise/Rim Series MORTISE CYLINDER626
RIM CYLINDER606
20-740
20-700 Series
Series 20-700 DescriptionSeries
All 20-740 6 Pin core only
B200/400, H 20-784 6 Pin core and housing, outside
B200/400 20-785 6 Pin core and housing, inside
Standard cam, compression ring20-763
for escutcheon trimStandard cam, compression ring,
20-771³⁄₈” blocking ring for rose trimL-Series cam, compression ring,
20-798for escutcheon trimL-Series cam, compression ring,
Mortise*20-776
³⁄₈” blocking ring for rose trimSpecial cam, compression ring (outside
20-782L9060) for escutcheon trimSpecial cam, compression, blocking ring
20-783(outside L9060) for rose trimAdams rite MS cam with compression ring,
20-766(2) blocking rings = ⁹⁄₁₆”Adams rite 4070 cam with compression ring,
20-722(2) blocking rings = ⁹⁄₁₆”
Rim 20-757 Standard rim with cylinder collar
*Available 1¹⁄₂ length only.
10
P R I M U S
Lockout Cylinders
Special Cams
Y
X
Sargent 13-0660(All functions except 16 inside and 50 outside)
XB11-630Primus
XB11-484Interchangeable Core
XB11-631Primus
XB11-461Interchangeable Core
XB11-656Primus
XB11-426Interchangeable Core
XB11-629Primus
XB11-352Interchangeable Core
Yale 2160/Arrow #004
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
Corbin RusswinDL4000 Series
Corbin Russwin ML2200 Series
Dim.X=.186Y=.718
Dim.X=.186Y=.718
Dim.X=.186Y=.718
Dim.X=.186Y=.718
Dim.X=.232Y=.729
Dim.X=.232Y=.729
Dim.X=.155Y=.775
Dim.X=.155Y=.775
Sargent is a registered trademark of Essex Industries, Inc.Yale is a registered trademark of Yale Security, Inc.Arrow is a registered trademark of Securitas.Corbin Russwin is a registered trademark ofCorbin Russwin Architectural Hardware.
Part No. Part No. Description
20-515 20-715 Standard cam, less compression rings
20-516 20-716 Rim cylinder
20-517 20-717 L cam, full face, less compression rings
Adams Rite MS cam, full face, 20-518 20-718
less compression rings
Lockout cylinders should not be masterkeyed.
Primus Primus 20-70020-500, 20-700 Interchangeable core Description
Series Series
XB11-630 XB11-484 Sargent 13-0660
XB11-631 XB11-461 Yale 2160/Arrow #004
XB11-656 XB11-426 Corbin Russwin DL4000
XB11-629 XB11-352 Corbin Russwin ML2200
11
P R I M U S
Replacement Cylinders
Sargent 10 Line(24-119, 20-519, 20-719)
Sargent 7 and 8 Line(24-120, 20-520, 20-720)
Sargent 6 Line(24-126, 20-526, 20-726)
Yale 5300, 5400 Knob, 6200 Series(24-123, 20-523, 20-723)
Yale 5400 Lever(24-147, 20-547, 20-747)
Corbin Russwin CL3400, CL3600 Series(24-139, 20-539, 20-739)
Corbin Russwin CK4200and UT5200 Series(24-127, 20-527, 20-727)
6-Pin 20-500 20-700 DescriptionCylinder Series Series
24-119 20-519 20-719 Sargent 10 Line
24-120 20-520 20-720 Sargent 7 & 8 Line
24-126 20-526 20-726 Sargent 6 Line
24-123 20-523 20-723 Yale 5300, 5400, Knob, 6200
24-147 20-547 20-747 Yale 5400 Lever
24-139 20-539 20-739 Corbin Russwin CL3400 & CL3600
24-127 20-527 20-727 Corbin Russwin CK4200 & UT5200
Sargent is a registered trademark of Essex Industries, Inc.Yale is a registered trademark of Yale Security, Inc.Arrow is a registered trademark of Securitas.Corbin Russwin is a registered trademark ofCorbin Russwin Architectural Hardware.
12
P R I M U S
KeysAll Primus cylinders use the Schlage nickel silver key embossedwith the Schlage Lock Company logo, the Primus key patentnumber and the words “DO NOT DUPLICATE.” Each keygoes through our patented side-bit milling process whichincludes machining of the key to exact geometric patterns.The design of this product is patent* protected and prohibitskey duplication by any other manufacturer.
Standard Primus Keybow35-157
Primus Control Key35-158
To order, specify quantity, sequence number, or key section.Primus key blanks are packed 50 per box, 1000 per case.
*Any infringement of this patent will be forcefully defended in thecourts of law by the Schlage Lock Company.
35-157 Standard Bow
35-053 Standard Bow, one side unembossed
35-116 Large Bow
35-115 Access Bow
35-158 Control Key, Standard Bow
35-052 Control Key, one side unembossed
35-159 Lockout Key, Standard Bow
Key Blanks and Cut Keys
Number Key Blanks (Side-bit milled)
48-157 Standard Bow
48-053 Standard Bow, one side unembossed
48-116 Large Bow
48-115 Access Bow
48-159 Lockout Key, Standard Bow
48-052 Control Key, one side unembossed
Number Cut Keys
49-157 Standard Bow
49-053 Standard Bow, one side unembossed
49-116 Large Bow
49-115 Access Bow
49-158 Control Key, Standard Bow
49-052 Control Key, one side unembossed
Number Master Keys
®
13
P R I M U S
I.D. CardsThe Primus I.D. card is issued by the servicing locksmith ordealer who directly supports the system owner. The owner mustpresent the I.D. card in order to obtain duplicate keys or service/additions to his system. Depending on the Primus security level,the owner’s signature will be validated by the dealer or theSchlage factory.
Keying KitThe Primus keying kit contains all of the unique Primuscomponents.
Primus Keying Kit40-070
Primus Level 1 I.D. Card
Number Description
MS-E110 Primus Restricted Key Order FormThis form is a three-part imprintable form used to record and track theissuance of Primus keys.
MS-E120 Primus Facesheet FormThis form must accompany all Level 3 and 4 orders and provides the factorywith a customer authorized signaturewhich is compared to the signature onfile, a Primus reference number (foradditions to an existing Primus system)and shipping instructions for that order.
MS-E130 Primus Signature Card FormThis form is used as a permanent record against which the signature ofindividuals authorized to obtain serviceand support for their Primus System isvalidated. This form must accompany all new Level 3 and 4 factory orders.
MS-E160 Primus I.D. Card Control RegisterThis form is used by locksmiths anddealers to account for the issuanceof Primus I.D. Cards.
Primus Facesheet
SCHLAGE
PRIMUS
Administrative Forms
PRIMUS
Primus Signature Card
SCHLAGE
PRIMUS
SCHLAGERestricted Key
Order Form
PRIMUS
SCHLAGE
Primus ID Card Control RegisterContents: Fingerpins, fingerpin springs, sidebars, sidebar springs,Primus cylinder plug holder andfollower.
Primus Cards
Level Number
1 40-061
1 plus 40-065
2 40-062
3 40-063
4 40-064
14
P R I M U S
Security LevelsThe Primus system features five different levels of security.Security increases from Level One through Level Four providingdifferent restrictions for key acquisition. Each level requires anappropriate I.D. card and/or signature verification for keyduplication. All levels utilize Primus cylinders and keys which are patent protected against unauthorized duplication. To selectthe proper level of security, consideration should be given to the overall key control, convenience, and service required for the installation.
Security Level OneOne standard side-bit milling is allocated to Primus Level One.Cylinders and keys are available on a local stock basis. Level Oneprovides the flexibility of local keying and integration into mostexisting Schlage key systems. Key control is in the hands of theowner who holds an I.D. card for the purpose of acquiringadditional keys. Level One is serviced through qualified SchlagePrimus Level One Locksmiths.
• Primus product stocked locally• Keying locally controlled• Standard side-bit milling• Positive I.D. required• Serviced by Primus Level One locksmiths or dealers
Security Level One-PlusPrimus Level One-Plus combines the convenience of locallystocked keys and cylinders with the enhanced security ofmultiple side-bit millings distributed on a limited basis. TheLevel One-Plus Center locksmith cuts all keys and performs allkeying services after validating the Primus I.D. card and verify-ing customer signature.
• Primus product stocked locally• Keying locally controlled• Limited distribution side-bit milling• Positive I.D. required• Serviced by Primus Level One-Plus Center locksmiths
Security Level TwoAt this level, local service and inventory of Primus patented keysand cylinders are available but on a more restricted basis. LevelTwo offers the customer a dealer exclusive side-bit milling. ThePrimus Level Two dealer cuts all keys and performs all keyingservices after validating the Primus I.D. card and verifying thecustomer signature. Factory masterkeying is available.
• Primus product stocked locally• Factory masterkeying available• Restricted distribution side-bit milling• Positive I.D. required• Serviced by Schlage Primus Level Two dealers
Security Level ThreeAt Level Three, the Schlage factory maintains control of thePrimus key system. The side-bit milling is assigned to eachinstallation based on the first 2 digits of the zip code. Productmay be furnished factory keyed or “0” bitted for local keyingby the end-user or their local locksmith. Installation data andauthorized signatures are controlled by the Schlage factory.To obtain key blanks, duplicate keys, service parts, or additionsto a factory masterkeyed system, signature verification isperformed by the factory.
• Keys and keying, factory/end-user controlled• Geographically restricted side-bit milling• Positive signature verification required
Security Level FourAs with Level Three, the Schlage factory maintains control ofPrimus Level Four key systems. Side-bit milling combinationsare assigned by one of two methods. For those sensitive installa-tions requiring stringent regional security, a side-bit millingexclusive to the installation’s time zone will be assigned. For siteswith optimum security requirements, a nationwide side-bitmilling exclusive to that installation can be assigned. Productmay be furnished factory keyed or “0” bitted for local keyingby the end- user or their local locksmith. Keying, key records,installation data, and authorized signatures are controlled by theSchlage factory. To obtain duplicate keys or request additions tothe system, signature verification is performed by the factory.
• Keys and keying, factory/end-user controlled• Time zone or nationwide “user exclusive” side-bit milling• Positive signature verification required
P R I M U S
15
Note: Schlage order forms are available at no charge by contacting your Schlage Representative or Customer Service.
How to OrderTo order Schlage products, descriptive data should be in the same sequence as shown.
Line Outside Inside DRItem Des Fin Des Fin Thk
1 2 3 4 5 6 7 8 9 10 11 12 13 14
ProductQty LatchHand Strike Additional DetailsDimExt
Line Outside Inside DrItem Des Fin Des Fin Thk
1 100 AL53LD SAT 6052 100 20-528 606 LKB, XXXX
XXXX=Sequence number or Keyway
ProductQty LatchHand Strike Additional DetailsDimExt
EXAMPLE
LH=Left Hand, RR=RightReverse, LR=Left Reverse.
9. Latch. Leave blank forstandard or specify partnumber if non-standardlatch is required. LLL=LessLatch.
10. Strike. Leave blank forstandard or specify partnumber if non-standardstrike is required.LLL=Less Strike.
11. Door Thickness. Enter doorthickness if non-standard.Example: 138=1⅜,
214=2¼, 212=2½.12. Extension. Enter one of
the following when doors2 thick or greater arespecified:EE = Extended EquallyEI = Extended InsideEO = Extended OutsideED = Extended DifferentlyEI or EO assumes the latchwill be centered on a 1¾door, to which material hasbeen added.
13. Enter dimension for non-standard strike lip length
and mortise cylinder orblocking ring length.012 = ⅛ 118 = 1⅛018 = ₃⁄₁₆ 114 = 1¼025 = ¼ 138 = 1⅜031 = ₅⁄₁₆ 112 = 1½037 = ⅜ 158 = 1⅝050 = ½ 134= 1¾078 = ⅞ 200 = 2100 = 1 400 = 4
14. Enter detail for keyinginformation and for specialrequirements.
1. Line item number2. Quantity3. Complete lock product or
part number4. Outside design code5. Outside finish code6. Inside design code. Leave
blank if same as outsidedesign code.
7. Inside finish code. Leaveblank if same as outsidefinish code.
8. Hand of door. Only onehand allowed per line item. Example: RH=Right Hand,
Limited WarrantySchlage Lock Company (the “Company”) warrants to the original purchaser that the products manufactured by it (the “Product”) to be freeof defects in material and workmanship. Provided: (i) The Company has been notified within one year of purchase date and been given theopportunity of inspection by return of any alleged defective Product to the Company, or its authorized distributor, at the address specified herein,free and clear of all liens and encumbrances, transportation prepaid, accompanied by the statement of defects and proof of purchase; and (ii)The Product has not been modified, abused, misused, or improperly installed, maintained and/or repaired during such period; and (iii)Such defect has not been caused by corrosion or ordinary wear and tear.
THE COMPANY MAKES NO OTHER WARRANTY, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE EXPRESSEDWARRANTY PERIOD AS SET FORTH ABOVE.THE COMPANY’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NOEVENT SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL DAMAGESOF ANY NATURE ARISING FROM THE SALE OR USE OF THIS PRODUCT, WHETHER IN CONTRACT, TORT, STRICTLIABILITY OR OTHERWISE.
Note: Should the Product be considered a consumer product as may be covered by the Magnusson Moss Federal Warranty Act, please be advisedthat: (1) Some states do not allow limitations on incidental consequential damages or how long an implied warranty lasts so that the abovelimitations may not fully apply; (2) This warranty gives specific legal rights and a buyer may also have other rights which may vary fromstate to state. For warranty service and shipping instructions, contact the Schlage Lock Company:
Customer Service Department2401 Bayshore Boulevard
San Francisco, California 94134(415) 330-5600
Fax (800) 452-0663
The Schlage Lock Company reserves the right to make changes in designs and specifications or to make additions or improvements on its productswithout notice and without incurring any obligation to incorporate them on products previously manufactured. The Schlage Lock Company is notresponsible for any modification, addition, or alteration to our products by others.
16
P R I M U S
© 1997 Schlage Lock CompanyPrinted in USAPlease Recycle
MS-M/P1 Rev. 1/97
Administrative Offices1915 Jamboree Drive, Suite 165Colorado Springs, CO 80920(719) 264-5300FAX (719) 264-5382
Commercial Customer Service2401 Bayshore BoulevardSan Francisco, CA 94134P.O. Box 193324San Francisco, CA 94119(800) 847-1864FAX (800) 452-0663FAX (415) 330-5627Order ProcessingFAX (800) 452-0665
International DivisionIngersoll-Rand Architectural Hardware1076 Lakeshore Road EastMississauga, Ontario, L5E 1E4, Canada(905) 278-6128FAX (905) 278-1413
Internethttp://www.schagelock.com
Fax-On-Demand(888) 321-3228