catalogo lovejoy serie jaw

26
JW-1 Jaw Type JW

Upload: juan-pablo-ciriza

Post on 26-Oct-2014

179 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Catalogo Lovejoy Serie Jaw

JW-1

Jaw Type

JW

Page 2: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-2

JW

Overview

Jaw Type Couplings—USA StandardElastomer-in-CompressionThe Jaw Type couplings from Lovejoy are offered in the industry’s largest variety ofstock bore/keyway combinations. These couplings require no lubrication and pro-vide highly reliable service for light, medium, and heavy duty electrical motor andinternal combustion power transmission applications. Other features and benefitsinclude:� Fail-safe — will still perform if elastomer fails.� No metal to metal contact.� Resistant to oil, dirt, sand, moisture and grease.� More than 850,000 combinations of bore sizes.� Most types available from stock in 24 hours.

Applications include power transmission to industrial equipment such as pumps,gear boxes, compressors, blowers, mixers, and conveyors. Lovejoy’s Jaw Type cou-plings are available in 24 sizes from a minimum torque rating of 3.5 in–lbs to amaximum torque rating of 170,004 in–lbs and a bore range of .125 inches to 7inches. Lovejoy’s standard bore program covers AGMA, SAE, and DIN bore/key-way and spline bore combinations.

The Lovejoy Jaw Type coupling is available in a variety of metal hub and insertmaterials. Hubs are offered in sintered metal, aluminum, bronze, steel, stainlesssteel, and ductile iron.

L TypeThis coupling offers standard shaft-to-shaft connection for general industrial dutyapplications. Standard L type coupling hub materials are either sintered iron (L035- L150) or cast iron (L190 - L276).

LC TypeThis is the basic L coupling, except the insert is a snap wrap elastomer with retain-ing collar. Designed for easy elastomer replacement without disturbing the hubs,this coupling type is suited for applications over 1750 RPM.

AL TypeThe aluminum construction means this coupling is light weight with low overhungload and low inertia. The AL type also offers excellent resistance to atmosphericconditions, so it is perfect for corrosive environment applications.

SS TypeNew SS type stainless steel hubs available for applications needing maximum pro-tection against harsh environmental conditions. Sizes SS075-SS150 available fromstock. Other sizes available on request.

RRS TypeThe center “drop out” section of this coupling provides proper shaft separation while also allowing easy elastomer installation without disturbing the hubs orrequiring realignment of shafts. Designed for the pump industry, it accommodatesAmerican and European industry standard pump/motor shaft separations. The drop out spacer is made of glass reinforced plastic, cast iron or aluminum.

SW TypeThis coupling is the standard L Type with a snap wrap elastomer with retaining ring. It is well suited for standard shaft-to-shaft connection in general industrial pur-pose applications under 1750 RPM.

C & H TypesThese couplings provide standard shaft-to-shaft connection for medium (C) and heavy (H) duty range applications. The standard C coupling hub is made of cast iron, while the H is constructed of ductile iron.

L COUPLING

LC COUPLING

AL COUPLING

RRS COUPLING

SW COUPLING

C & H COUPLINGS

The new Jaw In-Shear coupling is presented in the next section of this catalog,labeled “JIS” on the page tabs

SS COUPLING

Page 3: Catalogo Lovejoy Serie Jaw

JW-3

Jaw Type

JW

Lovejoy offers four types of elastomer designs to allow for additional flexibil-ity in addressing specific application requirements. One piece designs areused in the “L” and “AL” models (referred to as spiders) and multiple part“load cushions” are used in the “C” and “H” model couplings. The load cush-ions are in sets of 6 to 14 pieces depending on coupling size.

Solid Center SpiderThe solid center design is the most commonly used in general power trans-mission applications when the shafts of the driver and driven can be keptseparate by a standard gap.

Open Center SpiderThe open center spider design allows the shafts of the driver and driven tobe positioned within a short distance. Open center spiders offer shaft posi-tioning flexibility but have a lower maximum RPM capability. (1750 RPMmax. for NBR, 3600 RPM max. for Urethane/Hytrel.)

CushionsThe cushion design is available exclusively for the Lovejoy Types C and Hjaw couplings. The load cushions are held in place radially by a steel collarwhich is attached to one of the hubs. This design allows for easy installa-tion and removal of the load cushions. The cushion design has the sameengineering purpose as the spider designs but is more effective in theheavy duty applications that Types C and H couplings address.

Snap Wrap Flexible SpiderThe snap wrap flexible spider design allows the spider section of the cou-pling to be easily installed or removed without disturbing the coupling hubs.This design also allows for close shaft separations all the way up to thehubs maximum bore, which is not possible with open center spiders.Maximum RPM is 1750 with retaining ring, but if used in LC Type (with col-lar) the normal RPM rating of the coupling size applies. This style is avail-able in NBR and Urethane only, and in limited sizes.

NOTE:Complete technical data for the new Jaw In-Shear elastomer is containedin the next section of this catalog, labeled “JIS” on the page tabs.

Spider MaterialsSOX (NBR) RubberNitrile Butadiene (Buna N) Rubber, a highly flexible insert material that is oilresistant, is our standard elastomer. It resembles natural rubber inresilience and elasticity, and operates effectively in temperature ranges of -40º to + 212º F (-40º to +100ºC). (Also applies to SXB Cushions.)

UrethaneUrethane has 1.5 times greater torque capability than NBR and offers goodresistance to oil and chemicals. However, this material provides less damp-ening effect and operates at a temperature range of -30º to +160º F (-34º to +71ºC).

HytrelHytrel is a flexible elastomer designed for high torque and high temperatureoperations. Hytrel can operate in temperatures of -60º to +250º F (-51º to +121ºC) and has an excellent resistance to oil and chemicals. It is best used in continuous load applications rather than cyclic or on/offservice.

BronzeBronze is a rigid, porous, oil-impregnated metal insert exclusively for lowspeed (max. 250 RPM) applications requiring high torque capabilities.Bronze performance is not affected by water, oil, dirt, or extreme tempera-tures — operates in temperatures of -40º to +450º F (-40º to +232º C).

Overview

Elastomers-in-Compression

WARNINGYou must refer to page iv for Important Safety Instructions and Precautions for the selection and use of these products. Failure to follow the instructionsand precautions can result in severe injury or death.

!

Page 4: Catalogo Lovejoy Serie Jaw

Step 1: Determine the Nominal Torque of your application by using thefollowing formula:

Nominal Torque = in-lb = (HP x 63025)RPM

Nm = (KW x 9550)RPM

Step 2: Using the Application Service Factors Chart 1 (pg. JW-6) selectthe service factor which best corresponds to your application.

Step 3: Calculate the Design Torque of your application by multiplying theNominal Torque calculated in Step 1 by the Application ServiceFactor determined in Step 2.

Design Torque = Nominal Torque x Application Service Factor

Step 4: Using the Spider Performance Data Chart 2 (pg. JW-7), select the elastomer material which best corresponds to yourapplication.

Step 5: Using the Coupling Nominal Rated Torque Chart 3 (pg. JW-7),locate the appropriate elastomer material column for the elastomer selected in Step 4.

Scan down this column to the first entry where the Torque Valuein the appropriate column is greater than or equal to the DesignTorque calculated in Step 3.

Once this value is located, refer to the corresponding couplingsize in the first column of the Coupling Nominal Rated TorqueChart 3 (pg. JW-7).

List of Charts provided for Selection:Chart 1—Application Service Factors (pg. JW-6)Chart 2—Spider Performance Data (pg. JW-7)Chart 3—Coupling Nominal Rated Torque (pg. JW-7 or JW-20)Formulas:

Nominal Torque = in-lb = (HP x 63025)RPM

Nm = (KW x 9550)RPM

Design Torque = Nominal Torque x Application Service Factor

Jaw Type

JW-4

JW

Selection Process

The selection process for determining the proper jaw coupling size andelastomer requires using the charts shown on the following pages. Thereare three components to be selected, two hubs and one elastomer. Whenthe shaft size of the driver and driven of the application are of the samediameter, the hubs selected will be the same. When shaft diameters differ,hubs selected will differ accordingly.

Information necessary before a coupling can be selected:� HP (or KW) and RPM or Torque of driver� Shaft sizes of driver and driven equipment and

corresponding keyways� Application description� Environmental conditions (i.e. extreme temperature,

corrosive conditions, space limitations)

Steps In Selecting A Jaw Coupling

Jaw Type Coupling Selection Process

Refer to the maximum RPM value (pg. JW-20) for this elastomertorque capability to ensure that the application requirements aremet. If the requirement is not satisfied at this point, another type ofcoupling may be required for the application. Please consult ourLovejoy application engineers.

Step 6: Compare the application driver/driven shaft sizes to the maximum bore size available on the coupling selected. If coupling bore size isnot large enough for the shaft diameter, select the next largest cou-pling that will accommodate the driver/driven shaft diameters. Referto Chart 3 (pg. JW-7).

Step 7: Using the Item (UPC) Number Selection charts (pgs. JW-9 and JW-10), find the appropriate Bore and Keyway sizes required andlocate the Lovejoy Item (UPC) number.

Page 5: Catalogo Lovejoy Serie Jaw

JW-5

Jaw Type

JW

A coupling is needed to connect a 20 HP standard electric motor rated at1800 RPM to a rotary pump. The shaft size of the electric motor (driver) is2.0 inches and the pump (driven) is 1.75 inches. There are no specialenvironmental conditions and the general operating temperature is normalroom temperature of 72º F. Less than 1º of misalignment is expected.

Step 1: Determine the Nominal Torque:Nominal Torque = (HP x 63025)

RPM= (20 x 63025)

1800= 700.28 in-lb

Step 2: Using the Application Service Factor Chart 1 (pg. JW-6), selectthe service factor which best corresponds to your application.The Application Service Factor for an electric motor with stan-dard torque driving a rotary pump is 1.25. The value of 1.25 isfound under the application category Pumps, Rotary, column:Electric Motor w/Standard Torque in Chart 1.

Step 3: Calculate the Design Torque of your application:

Design Torque = Nominal Torque x Application Service Factor= 700.28 x 1.25 = 875.35 in-lb

Step 4: Using the Elastomer Performance Data Chart 2 (pg. JW-7),select the elastomer material which best corresponds to yourapplication. Since there are no special environmental conditions,the operating temperature is 72ºF and less than 1º of angularmisalignment is required, the NBR elastomer material is select-ed.

Step 5: Using the Coupling Nominal Rated Torque Chart 3 (pg. JW-7),the NBR elastomer column is used to determine the proper cou-pling size. Scanning down the NBR column, the first entry toaccommodate the Design Torque value of 875.35 in-lb is the sizeL150 with a nominal torque rating of 1,240 in-lb. Referring topage JW-20, the maximum RPM of 1800 on the electric motor ofthe application does not exceed the 5000 RPM maximumallowed for the L150 size coupling with an NBR elastomer.

Step 6: Compare the application driver/driven shaft size to the maximumbore available in the coupling selected (pg. JW-7). The electricmotor (driver) of this application has a shaft size of 2.0 inchesand the pump (driven) has a shaft size of 1.75 inches. The L150coupling has a maximum bore less than the driver shaft size.Continuing down the Maximum Bore column, in Chart 3 (pg. JW-7), the L190 size is found to have a maximum bore size of 2.125 and is able to accommodate the driver/driven

Selection Example

Selection Process

shaft sizes.Therefore, the proper coupling size for this application is a Lovejoy L190 with an NBR elastomer.

Step 7: Using the Item (UPC) number Selection charts, locate the appro-priate Lovejoy Item (UPC) numbers. The L Type Coupling Elastomer chart (pg. JW-8), and the L Type CouplingInch Hubs chart (pg. JW-10), provides easy reference to theLovejoy Item (UPC) numbers.

Locate the L Type Couplings Elastomer chart (pg. JW-8).

The elastomer is selected by scanning down the type column and locating the NBR (Solid) entry. Read across to the L190 column and locate the Lovejoy Item (UPC) number of 12274.This number should be prefixed with the Lovejoy Item (UPC) number of 685144.

Locate the L Type Coupling Inch Hubs selection chart (pg. JW-10).

The first bore size to be located is for the 2 inch shaft on the elec-tric motor. Scan down the Bore/Keyway column to the 2 inch boreentry. Read across to the L190 column to locate the Lovejoy Item(UPC) number of 12303. This number should be prefixed with the Lovejoy Item (UPC) number of 685144.

The second bore size to be located is for the 1.75 inch shaft on the pump. Scan down the Bore/Keyway column to the 13/4 inchbore entry. Read across to the L190 column to locate the LovejoyItem (UPC) number of 12299. This number should be prefixed with the Lovejoy Item (UPC) number of 685144.

Page 6: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-6

JW

Selection Data

Beater, Pulper, Jordans, Dresses .... 2.00 2.25 2.00 2.7 2.3

Calenders, Dryers, Washers, Thickener .................. 1.50 1.75 1.50 2.2 1.8Converting Machines, Conveyors ................ 1.20 1.45 1.20 1.9 1.5

Printing Presses ........ 1.50 1.75 1.50 1.7 1.3Pug Mill ...................... 1.75 2.00 1.75 2.0 1.6Pumps

Centrifugal ................ 1.00 1.25 1.00 1.7 1.3Gear, Rotary, Vane .... 1.25 1.50 1.25 2.0 1.6Reciprocating:1–Cyl. Single or Double Acting .......... 2.00 2.25 2.00 2.7 2.32–Cyl. Single Acting .. 2.00 2.25 2.00 2.7 2.3

2–Cyl. Double Acting1.75 2.00 1.75 2.5 2.03 or more Cyl. .......... 1.50 1.75 1.50 2.2 1.8

Rubber MachineryMixers ........................ 2.50 2.75 2.50 3.2 2.8Rubber Calender ...... 2.00 2.25 2.00 2.7 2.3

ScreensAir washing, Water .... 1.00 1.25 1.00 1.7 1.3Rotary—stone or gravel,Dewatering .............. 1.50 1.75 1.50 2.2 1.8

Vibrating .................... 2.50 2.75 2.50 3.2 2.8Grizzly ...................... 2.00 2.25 2.00 2.7 2.3

Shredders .................. 1.50 1.75 1.50 2.2 1.8Steering Gears .......... 1.00 1.25 1.00 1.7 1.3Stokers........................ 1.00 1.25 1.00 1.7 1.3Suction Roll (paper) .. 1.50 1.75 1.50 2.2 1.8Textile Machinery

Dryers, Dyeing Machinery,Mangle .................... 1.20 1.45 1.20 2.0 1.6

Loom, Spinner, Tenter frames............ 1.50 1.75 1.50 2.2 1.8

Tumbling Barrels........ 1.75 2.00 1.75 2.5 2.0Windlass .................... 2.00 2.25 2.00 2.7 2.3Woodworking Mach. ...... 1.00 1.25 1.00 1.7 1.3

1- 2-Cyl. Cyl.

Agitators .................... 1.00 1.25 1.00 1.7 1.3Band Resaw (lumber) .. 1.50 1.75 1.50 2.2 1.8Barge Haul Puller ........ 2.00 2.25 2.00 2.7 2.3Beaters........................ 1.50 1.75 1.50 2.2 1.8Blowers

Centrifugal ................ 1.00 1.25 1.00 1.7 1.3Lobe, Vane ................ 1.25 1.50 1.25 2.0 1.6

Bottling Machinery .... 1.25 1.50 1.25 2.0 1.6Brew Kettles (distilling) 1.25 1.50 1.25 2.0 1.6Can Filling Machinery 1.00 1.25 1.00 1.7 1.3Car Dumpers .............. 2.50 2.75 2.50 3.2 2.8Car Pullers.................. 1.50 1.75 1.50 2.2 1.8Card Machine ............ 1.75 2.00 1.75 2.5 2.0Chiller (oil) .................. 1.50 2.00 1.25 2.0 2.0Compressors

Centrifugal ................ 1.00 1.25 1.00 1.7 1.3Screw, Lobe .............. 1.25 1.50 1.25 2.0 1.6Reciprocating ............ See Note

Conveyors, Uniformly FedAssembly, Belt, Screw 1.00 1.25 1.00 1.7 1.3Bucket, Sawdust........ 1.25 1.50 1.25 2.0 1.6Live Roll, Shaker,

..........Reciprocating 3.00 3.25 3.00 3.7 3.3Conveyors, Not Uniformly Fed

Assembly, Belt, ..............Oven, Screw 1.20 1.45 1.20 1.9 1.5Reciprocating ............ 2.50 2.75 2.50 3.2 2.8Shaker ...................... 3.00 3.25 3.00 3.7 3.3

Cookers—Brewing, Distilling,Food .......................... 1.25 1.50 1.25 2.0 1.6

Cranes & Hoist .......... 2.00 2.25 2.00 2.7 2.3Crushers—Cane (sugar), Stone, or Ore

.................................. 3.00 3.25 3.00 3.7 3.3Dredges

Cable reels ................ 2.00 2.25 2.00 2.7 2.3Conveyors, Pumps,

Maneuvering Winches 1.50 1.75 1.50 2.2 1.8Cutter Head Drives.... 2.50 2.75 2.50 3.2 2.8

Dynamometer ............ 1.50 1.75 1.50 2.2 1.8Evaporators ................ 1.00 1.25 1.00 1.7 1.3Fans

Centrifugal ................ 1.00 1.25 1.00 1.7 1.3Cooling Towers .......... 2.00 2.25 2.00 2.7 2.3Forced Draft, Propeller .................. 1.50 1.75 1.50 2.2 1.8

Induced draft w/damper control...... 2.00 2.25 2.00 2.7 2.3

Induced draft w/o damper control ........ 1.25 1.50 1.25 2.0 1.6

Elec

tric

Mot

or w

/St

anda

rd To

rque

Elec

tric

Mot

or w

/ Hi

gh To

rque

Stea

m Tu

rbin

es &

En-

gine

s w/

4 or

mor

e cy

l.*

Recip

roca

ting

Engi

nes*

1- 2-Cyl. Cyl.

FeedersBelt, Screw ................ 1.00 1.25 1.00 1.7 1.3Reciprocating ............ 2.50 2.75 2.50 3.2 2.8

Filter, Press-oil .......... 1.50 1.75 1.50 2.2 1.8Generators

Not Welding .............. 1.00 1.25 1.00 1.7 1.3Welding...................... 2.00 2.25 2.00 2.7 2.3Hoist .......................... 1.50 1.75 1.50 2.2 1.8

Hammermills .............. 2.00 2.25 2.00 2.7 2.3Kilns ............................ 1.50 1.75 1.50 2.2 1.8Laundry Washers—

Reversing .................. 2.00 2.25 2.00 2.7 2.3Lumber Machinery

Barkers, Edger Feeder, Live Roll .................. 2.00 2.25 2.00 2.7 2.3

Planer, Slab Conveyor .. 2.00 2.25 2.00 2.7 2.3Machine Tools

Punch Press-gear Driven, Plate Planer.............. 2.00 2.25 2.00 2.7 2.3

Tapping Machinery, Bending Roll ............ 2.00 2.25 2.00 2.7 2.3

Main Drive ................ 1.50 1.75 1.50 2.2 1.8Auxiliary Drives.......... 1.00 1.25 1.00 1.7 1.3

Metal Forming MachinesDraw Bench-carriage & Main Drive ............ 2.00 2.25 2.00 2.7 2.3

Extruder, Forming Machine,Wire Drawing............ 2.00 2.25 2.00 2.7 2.3Table Conveyors ........ 2.50 2.75 2.50 3.2 2.8Wire Winding, Coilers, Slitters ...................... 1.50 1.75 1.50 2.2 1.8

Mills, Rotary TypeBall, Kilns, Pebble, Rolling, Tube ............ 2.00 2.25 2.00 2.7 2.3

Cement Kilns, Dryers, Coolers ........ 2.00 2.25 2.00 2.7 2.3Tumbling .................... 1.50 1.75 1.50 2.2 1.8

MixersConcrete, continuous .. 1.75 2.00 1.75 2.5 2.0Muller ........................ 1.50 1.75 1.50 2.2 1.8

Paper MillsAgitator (mixers), Reel, Winder ............ 1.20 1.45 1.20 1.9 1.5

Winder ...................... 1.20 1.45 1.20 1.9 1.5Barker (mechanical), Log Haul, Chipper .... 2.00 2.25 2.00 2.7 2.3

Barking Drum (spur gear)................ 2.50 2.75 2.50 3.2 2.8

1- 2-Cyl. Cyl.

Caution: Applications involving reciprocatingengines and reciprocating driven devices aresubject to critical rotational speeds which maydamage the coupling and/or connected equip-ment. Contact Lovejoy Engineering with specificrequirements.

Elec

tric

Mot

or w

/St

anda

rd To

rque

Elec

tric

Mot

or w

/ Hi

gh To

rque

Stea

m Tu

rbin

es &

En-

gine

s w/

4 or

mor

e cy

l.*

Recip

roca

ting

Engi

nes*

Elec

tric

Mot

or w

/St

anda

rd To

rque

Elec

tric

Mot

or w

/ Hi

gh To

rque

Stea

m Tu

rbin

es &

En-

gine

s w/

4 or

mor

e cy

l.*

Recip

roca

ting

Engi

nes*

Service Factors Service Factors Service Factors

Application Service Factors Chart 1

Page 7: Catalogo Lovejoy Serie Jaw

L035 .375 9 3.5 0.4 N/A N/A N/A N/A N/A N/AL/AL050 .625 16 26.3 3.0 39 4.5 50 5.6 50 5.6L/AL070 .750 19 43.2 4.9 65 7.3 114 12.9 114 12.9L/AL075 .875 22 90.0 10.2 135 15.3 227 25.6 227 25.6L/AL090 1.000 25 144.0 16.3 216 24.4 401 45.3 401 45.3L/AL095 1.125 28 194.0 21.9 291 32.9 561 63.4 561 63.4L/AL099 1.188 30 318.0 35.9 477 53.9 792 89.5 792 89.5L/AL100 1.375 35 417.0 47.1 626 70.7 1134 128.0 1134 128.0L/AL110 1.625 42 792.0 89.5 1188 134.0 2268 256.0 2268 256.0L150 1.875 48 1240.0 140.0 1860 210.0 3708 419.0 3706 419.0AL150 1.875 48 1450.0 163.8 N/A N/A N/A N/A N/A N/AL190 2.125 55 1728.0 195.0 2592 293.0 4680 529.0 4680 529.0L225 2.625 65 2340.0 264.0 3510 397.0 6228 704.0 6228 704.0L276 2.875 73 4716.0 533.0 N/A N/A N/A N/A 12500 1412.0C226 2.500 64 2988.0 338.0 N/A N/A 5940 671.0 5940 671.0C276 2.875 73 4716.0 533.0 N/A N/A 9432 1066.0 N/A N/AC280 3.000 76 7560.0 854.0 N/A N/A 13866 1567.0 N/A N/AC285 4.000 102 9182.0 1038.0 N/A N/A 16680 1882.0 N/A N/AC295 3.500 89 11340.0 1281.0 N/A N/A 22680 2563.0 22680 2563.0C2955 4.000 102 18900.0 2136.0 N/A N/A 37800 4271.0 37800 4271.0H3067 4.500 114 33395.0 3774.0 N/A N/A 47196 5333.0 47196 5333.0H3567 5.000 127 46632.0 5269.0 N/A N/A 63000 7119.0 63000 7119.0H3667 5.629 143 64812.0 7323.0 N/A N/A 88200 9966.0 88200 9966.0H4067 6.250 159 88224.0 9969.0 N/A N/A 126000 14237.0 126000 14237.0H4567 7.000 178 119700.0 13525.0 N/A N/A 170004 19209.0 170000 19209.0

JW-7

Jaw Type

JW

Selection Data

Temperature Range

-40º to +212º F-40º to +100º C

-30º to +160º F-34º to +71º C

-60º to +250º F-51º to 121º C

-40º to +450º F-40º to +232º C

Inch

.015

.015

.015

.010

Notes: 1. NBR standard shore hardness is 80A ±5A—Except L035=60A. Other softer or harder designs are available in NBR material; consult Lovejoy.2. Chemical Resistance chart shown in Engineering Data section.

80A

55DL050-L110

90-95AL150-L225

55D

.....

Maximum Spider MaterialBore

Coupling Nominal Rated Torque Chart 3

Spider Performance Data Chart 2

ShoreHardness1 Color

Misalignment

Angular ParallelDegree

1/2º

1/2º

SOX(NBR) Torque Urethane Torque Hytrel Torque Bronze TorqueSize Inch mm in-lbs Nm in-lbs Nm in-lbs Nm in-lbs Nm

Note: Bronze has a maximum RPM capability of 250 RPM. N/A indicates not available.

CharacteristicsSOX (NBR) Rubber—Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40 to +212ºF (-40 to +100ºC). Good resistance to oil.Standard elastomer. (Also applies to SXB Cushions.)

URETHANE—Urethane has greater torque capability than NBR (1.5 times), provides less dampening effect, and operates at a temperature range of -30 to +160ºF (-34 to +71ºC). Good resistance to oil and chemicals.Not recommended for cyclic or start/stop applications.

HYTREL—Hytrel is a flexible elastomer designed for high torque and high temperature operations. Hytrel can operate in temperatures of -60F to +250ºF (-51 to+121ºC) and has an excellent resistance to oil and chemicals. Not recommended for cyclic or start/stop applications.

BRONZE—Bronze is a rigid, porous oil-impregnated metal insert exclusively for slow speed (maximum 250 RPM) applications requiring high torque capabilities. Bronze operations are not affected by extreme temperatures, water, oil, or dirt.

HIGH

LOW

LOW

NONE

GOOD

VERYGOOD

EXCELLENT

EXCELLENT

DampeningCapacity

ChemicalResistance2

BLACK

BLUE

TAN

BRONZE

Page 8: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-8

JW

SOX(NBR) (Solid) 10118 10194 10406 10621 11070 11494 11724 12001 12274 12409 .....SOX(NBR) (open center) ..... ..... 10393 10620 10968 11492 11711 37880 37881 12406 12612Urethane (Solid) ..... 37786 10395 ..... ..... ..... ..... ..... ..... ..... .....Urethane (open center) ..... ..... 10411 10626 11075 11499 11729 12006 12280 12417 ......Hytrel (Solid) ..... 25307 ..... ..... ..... ..... 11717 11993 12265 12401 .....Hytrel (open center) ..... ..... 25308 25309 25310 11486 38097 38098 38099 12400 .....Bronze (open center) ..... 10198 10409 10624 11073 11497 11727 12004 12277 34517 25767Snap Wrap (NBR) w/ring ..... ..... ..... ..... 24669 24670 24671 24672 24673 ..... .....Snap Wrap (NBR) w/o ring ..... ..... ..... ..... 11071 11495 11725 12002 12275 ..... .....

SOX (NBR) Bulk - pk 25 50115 50116 50117 50118 50119 ..... ..... ..... ..... ..... .....SOX (NBR) Bulk - pk 10 ..... ..... ..... ..... ..... 50120 50121 50122 ..... ..... .....Snap Wrap Urethane - solid ring ..... ..... ..... ..... ..... 41170 41171 ..... 28284 26093 .....In-Shear Elastomer ..... ..... ..... ..... 67576 67577 67578 67579 67580 68559 67581In-Shear Ring ..... ..... ..... ..... 67584 67585 67586 67587 67588 68560 67589

Item Selection

Notes: 1. All pressure angles on above splines = 30º. Class 5 fit is standard, unless otherwise specified.2. All stock spline bore hubs are supplied standard with Lovejoy’s exclusive Centaloc Spline Locking Feature. See page C-21 for description.

When referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Spline Bore Diameters

When referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Type L035 L050 L070 L075 L090/095 L099/100 L110 L150 L190 L225 L276

L Type CouplingThe L Type sizes range from L035 to L276. Ordering requires selectingItem (UPC) numbers for two standard L hubs and one standard open orsolid center elastomer (spider).

SW Type CouplingThe SW Type sizes range from L090 to L190. Ordering requires selectingItem (UPC) numbers for two standard L hubs and one snap wrap spider.For both L and SW Type couplings, select hubs from the Standard Boreand Keyway chart (pgs. JW-9 and JW-10). Max. RPM for SW + Ring is1750 RPM. LC coupling types must be used for speeds above 1750 RPM.The LC Type coupling uses a snap wrap spider with a collar instead of aretaining ring.

Jaw In-Shear CouplingOrdering requires selecting item numbers for two standard hubs, one In-Shear elastomer and one In-Shear ring. See pages JIS-1 through JIS-4.

L Type Coupling Spiders

L Type Hub Spline Bore Chart

Teeth Pitch SAE Major Minor Major Diam. L090 L095 L099 L100 L110 L150 L190 L225 L2769 16/32 A .651 .509 .625 38568 37900 38571 37904 ..... ..... ..... ..... .....11 16/32 .776 .631 .750 38569 37901 38572 37905 37909 37917 37925 ..... .....13 16/32 B .901 .754 .875 38570 37902 38573 37906 37910 37918 37926 37935 .....13 8/16 D, E 1.798 1.506 1.750 ..... ..... ..... ..... 37915 37923 37931 37940 3857614 12/24 C 1.289 1.087 1.250 ..... ..... ..... ..... 37912 37920 37928 37937 3857715 16/32 BB 1.026 .877 1.000 ..... ..... 38574 37907 37911 37919 37927 37936 3857821 16/32 1.401 1.250 1.375 ..... ..... ..... ..... 37913 37921 37929 37938 .....23 16/32 1.526 1.375 1.500 ..... ..... ..... ..... 37914 37922 37930 37939 .....27 16/32 1.776 1.625 1.750 ..... ..... ..... ..... 37916 37924 37932 37941 3857915 8/16 F 2.048 1.753 2.000 ..... ..... ..... ..... ..... ..... 37933 37942 .....

Page 9: Catalogo Lovejoy Serie Jaw

JW-9

Jaw Type

JW

KeywayNo KWNo KWNo KWNo KWNo KW3 x 1.4No KW3 x 1.44 x 1.8No KW4 x 1.8No KW5 x 2.3No KW5 x 2.35 x 2.35 x 2.36 x 2.8No KW6 x 2.86 x 2.86 x 2.88 x 3.38 x 3.3No KW8 x 3.38 x 3.3No KW10 x 3.3No KW10 x 3.310 x 3.312 x 3.312 x 3.314 x 3.8No KW14 x 3.8No KW14 x 3.8No KW16 x 4.3No KW18 x 4.4No KW18 x 4.420 x 4.9

Item Selection

L Type Metric HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Notes: 1. Tolerances for bore and keyways are found in Engineering Data section (pg. 14). All hubs supplied standard with one set screw.2. Non-standard bores available—consult Lovejoy Engineering.

Bore45678910101112121414151516171819192022242528283032323535384042454848505055556060656570

L225..................................................................................................................................

489824831941849561845219749664496054749252674

.....47569562304879756231440895618544598

.....56544

.....

L190...............................................................................................

4671761497

.....59109521535618252976444714147345562561835803541474483204147556017

.....4832256228443925622947006

.....

.....

.....

.....

.....

L150...........................................................................

5247160156

.....

.....488216121844720481824675156179456794173841472418735618046562413374831841338451025618156227

.....

.....

.....

.....

.....

.....

.....

.....

.....

L110...........................................................................

520926006744288414714970041804452144830141906

.....4133345681

.....41334

.....45682413354568341336

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L100..................................................

55195.....

451014146947123555345617841926

.....4132952093444674133041470

.....4133148317

.....41332

.....49925

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L099............................................................

60094526974697252098

.....44647

.....4415747122419594199045055

.....5010347132

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L095........................................

49424.....

4483241465414664656145778413254970446626

.....4132641467448274132741468

.....41328

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L070...............

58803461515617741452498704145351562414544750541317

.....41455413184533359724

.....41319

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L075.........................

44298414564145750811

.....44153

.....413211069341458413224939841884

.....413234145958246

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L090....................

60945..........

52828.....

48276443294146151231

.....5209649198

.....46433107774146241925419684146341464

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L276.......................................................................................................................................

5623241885

.....

.....52961593084560950292

.....61202562334506256234560675623556236562375010258268

L050.....

462145035110215414604131310216414504131448510413155803641316607084145156176

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

................

L0354185047419458726067955169

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

................

Page 10: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-10

JW

Item Selection

KeywayNo KWNo KWNo KW1/8 x 1/16No KWNo KW3/32 x 3/641/8 x 1/16No KW3/32 x 3/641/8 x 1/16No KW1/8 x 1/16No KW1/8 x 1/16No KW5/32 x

5/643/16 x 3/323/16 x 3/32No KW1/8 x 1/163/16 x 3/323/16 x

3/32No KW3/16 x 3/321/4 x 1/81/4 x 1/81/4 x 1/83/16 x 3/321/4 x 1/81/4 x 1/81/4 x 1/81/4 x 1/85/16 x 5/325/16 x 5/325/16 x 5/323/8 x 3/163/8 x 3/165/16 x 5/323/8 x 3/163/8 x 3/163/8 x 3/163/8 x 3/163/8 x 3/167/16 x 7/321/2 x 1/41/2 x 1/41/2 x 1/41/2 x 1/41/2 x 1/41/2 x 1/41/2 x 1/41/2 x 1/45/8 x 5/165/8 x 5/163/4 x 3/8

L035101241012610127

.....1012824687

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L050..........

10206.....

102071020846121441361020944713

.....1021010211102121021310214

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L070..........

10416.....

104171041841985488291041944007440661042010421523381042324771511041042410425461165171910426

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L075..........

1068035744106811068237234357451068328089288751068410685106861068744322372401068810689561403588110690106915694110692

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L100........................................

115053723737238115062608911508115094429137243115101151145212372471151211513

.....11514356861151511516372591151711518115191152035748115211152244348

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L095........................................

110822761328879110832608837239110844191137242110851108656887370741108711088

.....11089357471109011091372581109211093

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L090..........

10766.....

26209107673723537236107682887728878107692608724976288764605237241107711077254282372461077310774

.....1077538188323323129637257

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L099........................................

312973819838199113331133411335382004417438201113361133749705382021133811339590631134038203113411134238204113431134411345

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

Boreinch

1/83/161/41/45/163/83/83/87/167/167/161/21/29/169/165/85/85/811/163/43/43/413/167/87/87/815/16

1111/1611/813/1611/411/415/1613/813/817/1611/211/219/1615/8111/1613/413/4113/1617/8115/16221/1621/823/1621/423/825/827/8

L110...........................................................................

11733372442621111734

.....372481173511736

.....117373574911738117393726011740117411174211743357521174411745372651174637269117471174811749

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

L150...........................................................................

12101372452621212102

.....372491210312104

.....1210535750121061210737261121081210912110121113575112112121133726612114372701211512116121171211812119372741212012121

.....

.....

.....

.....

.....

.....

.....

.....

.....

L190...............................................................................................

12285372503846837252

.....122863725612287122883726212289122901229112292372641229312294372671229537271122963727312297122981229937275123001230112302123031230412305

.....

.....

.....

.....

.....

L225...............................................................................................

12422.....

3588237255

.....12423357531242412425372631242612427124281242935754260901243037268124313727212432124331243412435124363727626091124371243812439260921244012441124421244341809

.....

L276...................................................................................................................

125821258554883

.....12586

.....

.....12587

.....1258812589

.....125904675812591

.....125924568912593600571259448250

.....125954976212596

.....125971259812599126021260512607

L Type Inch HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Notes: 1. Tolerances for bore and keyways are found in Engineering Data section (pg. 16). All hubs supplied standard with one set screw.2. Non-standard bores available—consult Lovejoy Engineering.

Page 11: Catalogo Lovejoy Serie Jaw

JW-11

Jaw Type

JW

Snap Wrap Spider and Collar Chart When referencing the Lovejoy Item(UPC) number, include 685144 as a prefix to the number shown in the table below.

LC090 LC095 LC099 LC100 LC110 LC150 LC190 LC225

Snap Wrap Spider/No Ring 11071 11071 11495 11495 11725 12002 12275 26093*Collar Only w/Screws 48340 48340 45258 45258 47932 47933 47934 47935

LC Type CouplingsLC Type couplings range in size from LC090 to LC225. The coupling designprovides for a collar to be attached to our hub shielding the snap wrap spi-der. Ordering requires selecting Item (UPC)) numbers for one standard LType hub (without collar attachment), (pgs. JW-9, JW-10), one LC Type hub(provides collar attachment), one standard snap wrap center insert and onecollar with screws.

LC Type Metric HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC)) number, include 685144 as a prefix to the number shown in the table below.

Notes:1. These “LC” hubs are drilled and

tapped to accept collar mountingscrews but the collar and hard-ware are not included.

2. See L Type (inch or metric) cou-pling hub chart for standard hub(pgs. JW-9 and JW-10).

3. Tolerances for bore and keywaysare found in Engineering Datasection (pg. 15).

4. All hubs are supplied with oneset screw.

Bore Keywaymm mm LC090 LC095 LC099 LC100 LC110 LC150 LC190 LC2258 No KW ..... ..... ..... ..... ..... ..... ..... .....9 3 x 1.4 ..... ..... ..... ..... ..... ..... ..... .....10 No KW ..... ..... ..... ..... ..... ..... ..... .....10 3 x 1.4 ..... ..... ..... ..... ..... ..... ..... .....11 4 x 1.8 ..... ..... ..... ..... ..... ..... ..... .....12 No KW 58596 ..... ..... ..... ..... ..... ..... .....12 4 x 1.8 58597 ..... ..... ..... ..... ..... ..... .....14 No KW 58598 58592 ..... ..... ..... ..... ..... .....14 5 x 2.3 58556 58559 ..... ..... ..... ..... ..... .....15 No KW ...... ..... ..... ..... ..... ..... ..... .....15 5 x 2.3 58599 ..... ..... ..... ..... ..... ..... .....16 5 x 2.3 ..... 58593 ..... ..... ..... ..... ..... .....17 5 x 2.3 ...... ..... ..... ..... ..... ..... ..... .....19 No KW ...... ..... ..... ..... ..... ..... ..... .....19 6 x 2.8 58557 58560 56197 58563 58566 ..... ..... .....20 6 x 2.8 ..... 58594 ..... ..... ..... ..... ..... .....22 6 x 2.8 ..... ..... ..... ..... ..... ..... ..... .....24 8 x 3.3 58558 58561 58588 58564 58567 ..... ..... .....25 8 x 3.3 58600 58595 58589 ..... ..... ..... ..... .....28 No KW ..... ..... ..... ..... ..... ..... ..... .....28 8 x 3.3 ..... 58562 58590 58565 58568 58571 58575 .....30 8 x 3.3 ..... ..... ..... ..... ..... ..... ..... .....32 No KW ..... ..... ..... ..... ..... ..... ..... .....32 10 x 3.3 ..... ..... ..... 52806 58587 58585 58586 .....35 No KW ..... ..... ..... ..... ..... ..... ..... .....35 10 x 3.3 ..... ..... ..... ..... ..... ..... ..... .....38 10 x 3.3 ..... ..... ..... ..... 58569 58572 58576 5858040 12 x 3.3 ..... ..... ..... ..... ..... ..... ..... .....42 12 x 3.3 ..... ..... ..... ..... 58570 58573 58577 5858145 14 x 3.8 ..... ..... ..... ..... ..... ..... ..... .....48 No KW ..... ..... ..... ..... ..... ..... ..... .....48 14 x 3.8 ..... ..... ..... ..... ..... 58574 58578 5858250 No KW ..... ..... ..... ..... ..... ..... ..... .....50 14 x 3.8 ..... ..... ..... ..... ..... ..... ..... .....55 No KW ..... ..... ..... ..... ..... ..... ..... .....55 16 x 4.3 ..... ..... ..... ..... ..... ..... 58579 5858360 No KW ..... ..... ..... ..... ..... ..... ..... .....60 18 x 4.4 ..... ..... ..... ..... ..... ..... ..... .....65 No KW ..... ..... ..... ..... ..... ..... ..... 5858465 18 x 4.4 ..... ..... ..... ..... ..... ..... ..... .....

Item Selection

Note: *indicates L225 snap wrap spider is urethane, solid ring.

Page 12: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-12

JW

Item Selection

LC Type CouplingsOrdering requires selecting Item (UPC) numbers for one standard L Type hub (without collar attach-ment), (pgs. JW-9, JW-10), one LC Type hub (provides collar attachment), one standard snap wrapcenter insert, (pg. JW-11), and one collar with screws, (pg. JW-11).

LC225

.....

.....

.....

.....

.....

.....

.....12456

.....

.....

.....

.....

.....

.....50125

.....50126

.....12462

.....

.....5012712465

.....12466

.....1246846818

.....12472

.....12476124771248012482

LC190

.....

.....

.....

.....

.....

.....

.....12322

.....12323

.....

.....

.....

.....44161

.....44160

.....12327

.....

.....12329

.....

.....12332

.....1233412336

.....12337123391234144064

.....

.....

LC150

.....

.....

.....

.....

.....45412

.....

.....

.....

.....

.....

.....

.....60343

.....12069

.....12071

.....1207348273

.....12075

.....12077

.....

.....1207944159

.....12082

.....

.....

.....

.....

LC110

.....

.....

.....

.....11828

.....

.....

.....

.....11829118301183256566118341183655552118381184011841

.....

.....1184211844

.....118461184811849

.....

.....

.....

.....

.....

.....

.....

.....

LC100.....

.....

.....1157548768

.....

.....11577

.....5546641920

.....1157849553

.....11579

.....11580

.....1158159046

.....45257

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

LC099

.....

.....

.....

.....

.....

.....48886

.....

.....

.....

.....

.....56567

.....52825

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

LC095

.....

.....11133

.....

.....

.....11134

.....

.....111351113611137

.....1113811139

.....4415611140

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

LC090

453214532245323

.....

.....

.....45324

.....

.....45325

.....45326

.....

.....45327

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

Keyway

No KWNo KWNo KW1/8 x 1/16

No KW5/32 x 5/643/16 x 3/32

No KW1/8 x 1/163/16 x 3/323/16 x

3/323/16 x 3/321/4 x 1

81/4 x

1/81/4 x 1/8

3/16 x 3/321/4 x 1/81/4 x 1/81/4 x 1/8

5/16 x5 /32

5/16 x 5/325/16 x 5/323/8 x 3/165/16 x 5/323/8 x 3/163/8 x 3/163/8 x 3/163/8 x 3/167/16 x 7/321/2 x 1/41/2 x 1/41/2 x 1/41/2 x 1/41/2 x 1/45/8 x 5/16

Bore1/43/81/21/25/85/85/83/43/43/4

13/167/87/8

15/16

11

11/8

13/16

11/4

11/4

15/16

13/8

17/16

11/2

11/2

19/16

15/8

13/4

13/4

17/8

115/16

221/8

21/4

23/8

LC Type Inch HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC)) number, include 685144 as a prefix to the number shown in the table below.

Notes: 1. These “LC” hubs are drilled and tapped to accept collar mounting screws but the collar and hardware are not included.2. See L Type (inch or metric) coupling chart for standard hub.3. Tolerances for bore and keyways are found in Engineering Data section (pg. 16).4. All hubs are supplied standard with one set screw.

...

Page 13: Catalogo Lovejoy Serie Jaw

JW-13

Jaw Type

JW

Bore Keywaymm mm AL050 AL070 AL075 AL090 AL095 AL099 AL100 AL110 AL150

8 No KW ..... ..... 48973 ..... .... ..... ..... ..... .....10 3 x 1.4 ..... ..... 41924 56514 ..... ..... ..... ..... .....11 4 x 1.8 ..... 65694 51098 58620 ..... ..... ..... ..... .....12 4 x 1.8 ..... 56487 64655 60429 ..... ..... ..... ..... .....14 5 x 2.3 ..... 65696 47302 58621 56800 58624 ..... ..... .....15 5 x 2.3 ..... 62906 49633 58622 56801 ..... 49629 ..... .....16 5 x 2.3 ..... ..... 52221 ..... 47014 ..... 45012 ..... .....17 5 x 2.3 ..... ..... ..... 60887 44712 ..... 59164 ..... .....19 6 x 2.8 ..... 65698 47427 44679 47012 58625 47253 59064 .....20 No KW ..... ..... 56137 ..... ..... ..... ..... ..... .....20 6 x 2.8 ..... ..... 59394 61478 48347 49634 49630 49631 6087822 6 x 2.8 ..... ..... ..... ..... 47013 ..... ..... ..... .....24 8 x 3.3 ..... ..... ..... ..... 45736 58626 44058 45690 6463425 8 x 3.3 ..... ..... ..... ..... 65469 49709 55687 45933 6463328 8 x 3.3 ..... ..... ..... ..... 47015 58627 47393 45463 .....30 8 x 3.3 ..... ..... ..... ..... ..... 52048 58266 49632 4506332 10 x 3.3 ..... ..... ..... ..... ..... ..... ..... 54417 4434735 10 x 3.3 ..... ..... ..... ..... ..... ..... ..... 46215 6480336 10 x 3.3 ..... ..... ..... ..... ..... ..... ..... ..... 5173738 10 x 3.3 ..... ..... ..... ..... ..... ..... ..... 52692 5821542 12 x 3.3 ..... ..... ..... ..... ..... ..... ..... ..... 4540446 14 x 3.8 ..... ..... ..... ..... ..... ..... ..... ..... 64119

Type AL050 AL070 AL075 AL090/095 AL099/100 AL110 AL150

SOX (NBR) (solid) 10194 10406 10621 11070 11494 11724 18027SOX (NBR) (open center) ..... 10393 10620 10968 11492 11711 .....Urethane (solid) 37786 10395 ..... ..... ..... ..... .....Urethane (open center) ..... 10411 10626 11075 11499 11729 .....Hytrel (solid) 25307 ..... ..... ..... ..... 11717 .....Hytrel (open center) ..... 25308 25309 25310 11486 38097 .....Bronze (open center) 10198 10409 10624 11073 11497 11727 .....Snap Wrap w/ring ..... ..... ..... 24669 24670 24671 .....Snap Wrap no ring ..... ..... ..... 11071 11495 11725 .....

Item Selection

AL Type Coupling SpidersWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Note: AL Type couplings use the same spiders as L Type couplings, except AL150 which has four jaws instead of three.

AL Type Metric Hubs Standard Bore and Keyway Chart When referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

AL Type CouplingsOrdering requires selecting Item (UPC) numbers for two hubs and one spider.

1. Tolerances for bore and keyways are found in Engineering Data section (pg. 14).2. Lovejoy does not recommend reboring AL hubs.3. All hubs are supplied standard with one set screw, except the AL150 which is provided with two set screws.

Notes:

Page 14: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-14

JW

Item Selection

AL Type Couplings

AL Type Inch HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Bore Keyway AL050 AL070 AL075 AL090 AL095 AL099 AL100 AL110 AL1501/4 No KW 10252 10463 10630 10791 ..... ..... ..... ..... .....5/16 No KW 10253 10464 10631 10792 ..... ..... ..... ..... .....3/8 No KW 10254 10466 10632 10793 ..... ..... ..... ..... .....7/16 No KW 10256 10469 10633 10794 ..... ..... ..... ..... .....1/2 No KW 10257 10471 10634 10795 17847 17880 17914 ..... .....1/2

1/8 x 1/16 49706 10473 10635 10796 17848 17881 17915 ..... .....9/16 No KW ..... ..... 10637 10797 ..... ..... 56473 ..... .....9/16

1/8 x 1/16 ..... ..... 10638 44812 37994 44323 17917 ..... .....5/8 No KW 10259 10480 61817 44004 ..... ..... ..... 17977 180355/8

3/16 x 3/32 ..... 10482 10639 10798 17850 17882 17918 38888 4482811/16

3/16 x 3/32 ..... ..... 45227 10799 17851 45494 17919 44059 466423/4

1/8 x 1/16 ..... ..... 47835 47725 46295 ..... ..... ..... .....3/4

3/16 x 3/32 ..... 10491 10640 10800 17852 17883 17920 17978 1803613/16

3/16 x 3/32 ..... ..... 10641 10801 17853 17884 17921 ..... .....7/8

3/16 x 3/32 ..... ..... 10642 10802 17854 17885 17922 17979 1803715/16

1/4 x 1/8 ..... ..... ..... ..... 17855 17886 17923 17980 180381 1/4 x 1/8 ..... ..... ..... ..... 17856 17887 17924 17981 1803911/16

1/4 x 1/8 ..... ..... ..... ..... 17857 17888 17925 26094 1804011/8

1/4 x 1/8 ..... ..... ..... ..... 17858 17889 17926 17982 1804113/16

1/4 x 1/8 ..... ..... ..... ..... ..... 17890 17927 17983 1804211/4

1/4 x 1/8 ..... ..... ..... ..... ..... ..... 17928 17984 1804315/16

5/16 x 5/32 ..... ..... ..... ..... ..... ..... 17929 17985 1804413/8

5/16 x 5/32 ..... ..... ..... ..... ..... ..... 17930 17986 1804517/16

3/8 x 3/16 ..... ..... ..... ..... ..... ..... 45508 17987 1804611/2

3/8 x 3/16 ..... ..... ..... ..... ..... ... ..... 17988 1804719/16

3/8 x 3/16 ..... ..... ..... ..... ..... ..... ..... 17989 1804815/8

3/8 x 3/16 ..... ..... ..... ..... ..... ..... ..... 17990 18049111/16

3/8 x 3/16 ..... ..... ..... ..... ..... ..... ..... ..... 1805013/4

3/8 x 3/16 ..... ..... ..... ..... ..... ..... ..... ..... 18051113/16

1/2 x 1/4 ..... ..... ..... ..... ..... ..... ..... ..... 1805217/8

1/2 x 1/4 ..... ..... ..... ..... ..... ..... ..... ..... 18053

Notes:1. Tolerances for bore and keyways are found in Engineering Data section (pg. 16).2. Lovejoy does not recommend reboring AL hubs.3. All hubs are supplied standard with one set screw, except the AL150 which is provided with two set screws.

Ordering requires selecting Item (UPC) numbers for two hubs and one spider.

Size RSB 1/4 1/2 5/8 3/4 7/8 1" 1-1/8 1/8 1/ -3/8 1-1/2 1/2 1/ -5/8 1-3/4 1/4 1/ -7/8SS075 70001 70006 70007 70008 70009 70010 - - - - - - -SS095 70002 70011 70011 70012 70013 70014 70015 70016 - - - - -SS100 70003 - - - 70017 70018 70019 70020 70022 - - - -SS110 70004 - - - - - 70023 70024 70026 70027 70028 -SS150 70005 - - - - - 70029 70030 70032 70033 70034 70035 70036

SS Type Inch HubsType Inch HubsTStandard Bore and Keyway ChartWhen reference the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table shown.

Page 15: Catalogo Lovejoy Serie Jaw

Bore Keywaymm mm RRS090 RRS095 RRS099 RRS100 RRS110 RRS150 RRS190 RRS225

12 No KW 48276 ..... ..... ..... ..... ..... ..... .....14 No KW 41461 41465 ..... ..... ..... ..... ..... .....14 5 x 2.3 51231 41466 60094 45101 ..... ..... ..... .....15 No KW ..... 46561 52697 41469 ..... ..... ..... .....15 5 x 2.3 52096 45778 46972 47123 ..... ..... ..... .....16 5 x 2.3 49198 41325 52098 55534 52092 52471 ..... .....19 No KW 10777 ..... ..... ..... 41471 ..... ..... .....19 6 x 2.8 41462 41326 44157 41329 49700 48821 46717 .....20 6 x 2.8 41925 41467 47122 52093 41804 ..... 61497 .....23 8 x 3.3 50135 ..... ..... ..... ..... ..... ..... .....24 8 x 3.3 41463 41327 41990 41330 48301 48182 59109 .....25 8 x 3.3 41464 41468 45055 41470 41906 46751 52153 .....28 8 x 3.3 ..... 41328 50103 41331 41333 45679 52976 .....30 8 x 3.3 ..... ..... 47132 48317 45681 41738 44471 4898232 No KW ..... ..... ..... ..... ..... 41472 41473 4831932 10 x 3.3 ..... ..... ..... 41332 41334 41873 45562 4184935 10 x 3.3 ..... ..... ..... 49925 45682 46562 58035 5219738 10 x 3.3 ..... ..... ..... ..... 41335 41337 41474 4966440 12 x 3.3 ..... ..... ..... ..... 45683 48318 48320 4960542 12 x 3.3 ..... ..... ..... ..... 41336 41338 41475 47492

JW-15

Jaw Type

JW

RRS Type Coupling Spacer AssemblyWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Description RRS090 RRS095 RRS099 RRS100 RRS110 RRS150 RRS190 RRS225

31/2� Spacer Assembly 12620 12620 12630 12630 12644 12660 12676 126855� Spacer Assembly 26119 26119 26123 26123 26128 26770 27042 270417� Spacer Assembly 26120 26120 26124 26124 26129 27044 27043 27039100mm Spacer Assembly 55563 55563 55567 55567 55570 61056 61057 61058140mm Spacer Assembly 55281 55281 55569 55569 55571 55572 55573 55574180mm Spacer Assembly 61055 61055 55575 55575 55576 55577 55578 55579

Note: Spacer length denotes separation between shaft ends. Assembly includes spacer, two snap wrap spiders w/o ring,and two collars with screws. See page JW-8 for ordering information on spiders.

Item Selection

Radially Removable Spacer—RRS CouplingsThe RRS Type couplings range from sizes RRS090 to RRS225. Orderingrequires selecting Item (UPC) numbers for:

RRS090—RRS110: RRS150—RRS225:2 Standard RRS Hubs 1 Standard RRS Hub1 Spacer Assembly consisting of: 1 Standard RRSC Hub—

2 snap wrap spiders w/o ring Drilled for Collar2 collars with screws 1 Spacer Assembly consisting of:1 spacer 2 snap wrap spiders w/o ring

2 collars with screws1 spacer

RRS Type Metric HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Note: RRS Type Inch Hubs provided standard with two set screws at 90º.Metric Hubs provided standard with one set screw.

Note: DIN Metric Hubs are standard with one set screw only.

Page 16: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-16

JW

Item Selection

Radially Removable Spacer—RRS Couplings

Inch HubsStandard Bore and Keyway Chart

Bore5/83/43/47/8

111/813/811/215/813/417/8221/8

KeywayNo KWNo KW3/16 x 3/323/16 x 3/321/4 x 1/81/4 x 1/85/16 x 5/323/8 x 3/163/8 x 3/163/8 x 3/161/2 x 1/41/2 x 1/41/2 x 1/4

RRSC15045269

.....45312452704527144779440064963941881

.....45272

.....

.....

RRSC190.....

45281.....

45282452834528445285

.....45286452874528845289

.....

RRSC225.....

453014530345293453054510545306453074530845309419544531045311

Note: RRSC hubs are standard with two set screws and are drilled to accept retaining collar. Collars are supplied with spacers.

Keywaymm

No KW10 x 3.3 12 x 3.312 x 3.3

Boremm32384042

Standard Bore and Keyway Chart

RRS Type Inch HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

RRS090..........

4122756512

.....

.....

.....38143

.....38144

.....4122851672

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

KeywayNo KW3/16 x 3/32No KW1/8 x 1/163/16 x 3/323/16 x 3/32No KW3/16 x 3/32No KW3/16 x 3/321/4 x 1/83/16 x 3/321/4 x 1/81/4 x 1/85/16 x 5/321/4 x 1/85/16 x 5/323/8 x 3/163/8 x 3/163/8 x 3/163/8 x 3/161/2 x 1/41/2 x 1/41/2 x 1/45/8 x 5/16

RRS225........................................

4529045292

.....452914529445295

.....50743452964965845297452984529941953453004472445106

RRS190........................................

45273..........

452744527545276

.....4850344725489334662845277452784527945280

.....

.....

RRS150..............................

4526550163

.....45266

.....4526745268451534810445392440024965949638418804516244214

.....

.....

.....

RRS110..............................

38159..........

38160.....

381613816238163

.....3816438165515794081638166

.....

.....

.....

.....

.....

RRS10041231

.....5219938151

.....

.....

.....38152

.....3815352966381543815538156

.....3815738158

.....

.....

.....

.....

.....

.....

.....

.....

RRS09952184

.....41230

.....

.....

.....

.....38168

.....38169

.....381703817138172

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

RRS09541229

.....5035738145

.....44474

.....38146

.....38147

.....381483814938150

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

.....

Bore 7/167/161/21/21/29/165/85/83/43/47/87/8

111/811/811/413/817/1611/215/813/417/8221/823/8

Note: RRS inch hubs are standard with two set screws, including those with no keyway.

RRS Type Couplings—RRSC Hubs (Collar Drilled)When referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the tables below.Metric Hubs

RRSC22555683

.....

.....

.....

RRSC19055679556805568155682

RRSC150 55675556765567755678

Note: RRSC inch hubs are standard with two set screws and aredrilled to accept retaining collar. Collars are supplied withspacers.

Page 17: Catalogo Lovejoy Serie Jaw

JW-17

Jaw Type

JW

Bore Keywaymm mm C226 C276 C280 C285 C295 C295530 8 x 3.3 62792 ..... ..... ..... ..... .....35 10 x 3.3 60243 47386 ..... ..... ..... .....38 10 x 3.3 45348 62160 ..... ..... ..... .....40 12 x 3.3 49379 54037 ..... ..... ..... .....42 12 x 3.3 ..... 45219 ..... ..... ..... .....45 14 x 3.8 52550 44723 58265 ..... ..... .....48 14 x 3.8 54288 ..... 52205 ..... ..... .....55 16 x 4.3 58011 58444 49012 ..... ..... .....60 18 x 4.4 ..... 47265 49378 ..... ..... .....65 18 x 4.4 ..... 52008 ..... ..... ..... 5867670 20 x 4.9 ..... 59032 ..... 56794 54355 5867775 22 x 5.4 ..... ..... ..... ..... 47813 5867880 22 x 5.4 ..... ..... ..... 44487 58675 5867990 25 x 5.4 ..... ..... ..... 54363 ..... .....95 25 x 5.4 ..... ..... ..... ..... ..... 62695

Bore Keyway C226 C276 C280 C285 C295 C29557/8 RSB 40125 40126 ..... ..... .... .....11/8

1/4 x 1/8 26036 26050 ..... ..... ..... .....11/4 RSB .... ..... 26067 41036 ..... .....11/4

1/4 x 1/8 26037 26051 48988 47173 ..... .....13/8

5/16 x 5/32 26038 26052 46278 55546 ..... .....17/16

3/8 x 3/16 26039 ..... ..... ..... ..... .....11/2 RSB ..... ..... ..... ..... 41037 .....11/2

3/8 x 3/16 26040 26053 46277 48366 44824 .....15/8

3/8 x 3/16 26041 26054 46194 41892 56078 .....13/4 RSB ..... ..... ..... ..... ..... 4103813/4

3/8 x 3/16 26042 26055 44011 52311 45780 .....17/8

1/2 x 1/4 26043 26056 44012 51533 47080 490752 1/2 x 1/4 26044 26057 48194 ..... ..... .....21/8

1/2 x 1/4 26045 26058 44370 49809 44711 .....21/4

1/2 x 1/4 26046 44547 ..... ..... ..... .....23/8

5/8 x 5/16 26047 26060 44014 47288 44825 5270321/2

5/8 x 5/16 26048 46120 51998 56779 45249 4845425/8

5/8 x 5/16 ..... 46755 44013 ..... 50145 5454927/8 3/4 x 3/8 ..... 26064 51525 49456 52702 481083 3/4 x 3/8 ..... ..... 48193 ..... ..... .....33/8

7/8 x 7/16 ..... ..... ..... 47171 45402 4907731/2

7/8 x 7/16 ..... ..... ..... 46844 52988 4454535/8

7/8 x 7/16 ..... ..... ..... ..... ..... 5010633/4

7/8 x 7/16 ..... ..... ..... ..... ..... 5837837/8 1 x 1/2 ..... ..... ..... 48247 ..... 493514 1 x 1/2 ..... ..... ..... ..... ..... 55016

Size C226 C276 C280 C285 C295 C2955Number of Cushions 6 6 6 6 6 10SXB(NBR) cushion set 14547 14633 14712 14771 14805 14856Hytrel cushion set 27529 14637 14716 14774 14808 14859Bronze cushion set 14545 ..... ..... ..... 51914 51915Collar with hardware 40122 40123 40124 40292 40293 40293

Item Selection

C Type CouplingsComplete coupling selection includes two standard hubs, one cushion set, and one collar with hardware.

Note: RSB (Rough Stock Bore) hub has no keyway or set screw hole, it is not useable as shown and must be machined to proper bore tolerances. Hub includes inside sleeve and is drilled and tapped for collar bolts. Non-standard bores available—consult Lovejoy Engineering.

Note: Chemical resistance and compatibility for cushions is described in Engineering Data section (pg. ED-13).

Cushions and Collar ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Note: RSB (Rough Stock Bore) hub has no keyway or set screw hole, it is not useable as shown and must be machined to proper bore tolerances. Hub includes inside sleeve and isdrilled and tapped for collar bolts. Non-standard bores available—consult LovejoyEngineering. For RSB hub part numbers see the C Type Inch Hub chart.

C Type Metric HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

C Type Inch HubsStandard Bore and Keyway ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Page 18: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-18

JW

Bore H3067 H3567 H3667 H4067 H456721/8 RSB 48070 ….. ….. ….. …..25/8 RSB ….. 50883 ….. ….. …..3 RSB ….. ….. 47878 ….. …..31/4 RSB ….. ….. ….. 55473 …..31/2 RSB ….. ….. ….. 55477 …..

Notes: 1. RSB (Rough Stock Bore) hub has no keyway or set screw hole.

Item Selection

H Type Couplings

Cushions and Collar Chart

H Type HubsRough Stock Bore ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as aprefix to the number shown in the table below.

Size H3067 H3567 H3667 H4067 H4567No. of Cushions 14 14 14 14 14SXB cushion set 15365 15386 15419 15457 15473Hytrel cushion set 15367 15388 45223 15459 55475Collar w/hardware 15361 15381 15411 55472 55476

When referencing the Lovejoy Item (UPC) number, include 685144 as aprefix to the number shown in the table below.

2. RSB bores should not be used as shown and may need additional machining to reach proper tolerances.

Complete H Type coupling selection includes two hubs, two insidesleeves, one cushion set, and one collar with hardware. H Type couplinghubs are supplied with an inside sleeve. For technical assistance, pleasecontact Lovejoy Engineering.

Page 19: Catalogo Lovejoy Serie Jaw

JW-19

Jaw Type

JW

Bore RRC226 RRC276 RRC280 RRC285 RRC295 RRC2955

7/8 RSB 55770 55771 ..... ..... ..... .....11/4 RSB ..... ..... 52030 55772 ..... .....11/2 RSB ..... ..... ..... ..... 55773 .....13/4 RSB ..... ..... ..... ..... ..... 55774

RRC Type Spacer AssemblyWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

Description RRC226 RRC276 RRC280 RRC285 RRC295 RRC2955

31/2� Spacer Assembly 55709 55712 55715 55718 ….. …..4� Spacer Assembly ….. ….. ….. ….. 55721 557245� Spacer Assembly 55710 55713 55716 55719 55722 557517� Spacer Assembly 55711 55714 55717 55720 55723 55752

Item Selection

Radially Removable Spacer—RRC Coupling

RRC Type Adapter HubsStandard Rough Stock Bore ChartWhen referencing the Lovejoy Item (UPC) number, include 685144 as a prefix to the number shown in the table below.

The RRC Type sizes range from RRC226 to RRC2955.Ordering requires selecting Item (UPC) numbers for:2 RRC Hub Adapters (includes bolts)1 Spacer assembly consisting of:

� 2 RRC Jaw Rings� 1 collar with hardware� 1 set of SXB (NBR) cushions

Page 20: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-20

JW

L, AL & LC TYPEL035 SOX (NBR) 2 .006 .07 .1 .22 3.5 .40 .375 9 31.0L050/AL050 SOX (NBR) 2 .042 .50 .75 1.51 26.3 2.97 .625 16 18.0L050/AL050 Hytrel 2 .080 .96 1.43 2.88 50.0 5.65 .625 16 18.0L070/AL070 SOX (NBR) 2 .070 .84 1.23 2.52 43.2 4.88 .750 19 14.0L070/AL070 Hytrel 2 .180 2.16 3.26 6.48 114.0 12.88 .750 19 3.6L075/AL075 SOX (NBR) 3 .140 1.68 2.57 5.04 90.0 10.17 .875 22 11.0L075/AL075 Hytrel 3 .360 4.32 6.48 12.96 227.0 25.65 .875 22 3.6L090/AL090/LC090 SOX (NBR) 3 .230 2.76 4.11 8.28 144.0 16.27 1.00 25 9.0L090/AL090 Hytrel 3 .640 7.68 11.50 23.04 401.0 45.31 1.00 25 3.6L095/AL095/LC095 SOX (NBR) 3 .310 3.72 5.50 11.16 194.0 21.92 1.12 28 9.0L095/AL095 Hytrel 3 .890 10.68 16.00 32.04 561.0 63.38 1.12 28 3.6L099/AL099/LC099 SOX (NBR) 3 .500 6.00 9.10 18.00 318.0 35.93 1.18 30 7.0L099/AL099 Hytrel 3 1.260 15.12 22.60 45.36 792.0 89.48 1.18 30 3.6L100/AL100/LC100 SOX (NBR) 3 .660 7.92 11.90 23.76 417.0 47.11 1.38 35 7.0L100/AL100 Hytrel 3 1.800 21.60 32.40 64.80 1134.0 128.12 1.38 35 3.6L110/AL110/LC110 SOX (NBR) 3 1.260 15.12 23.00 45.36 792.0 89.48 1.62 42 5.0L110/AL110 Hytrel 3 3.600 43.20 65.00 129.60 2268.0 256.25 1.62 42 5.0L150/LC150 SOX (NBR) 3 2.000 24.00 35.00 72.00 1240.0 140.10 1.88 48 5.0L150 Hytrel 3 5.900 70.80 106.00 212.40 3708.0 418.95 1.88 48 5.0AL-150 SOX (NBR) 4 2.300 27.60 41.40 82.80 1450.0 163.83 1.88 48 5.0L190/LC190 SOX (NBR) 3 2.700 32.40 49.00 97.20 1728.0 195.24 2.12 55 5.0L190 Hytrel 3 7.400 88.80 134.00 266.40 4680.0 528.77 2.12 55 5.0L225/LC225 SOX (NBR) 3 3.700 44.40 67.00 133.20 2340.0 264.38 2.62 65 4.2L225 Hytrel 3 9.900 118.80 178.00 356.40 6228.0 703.67 2.62 65 4.2L276 SOX (NBR) 3 7.500 90.00 135.00 + 4716.0 532.84 2.88 73 1.8C TypeC226 SXB (NBR) 3 4.700 56.40 85.00 169.20 2988.0 337.60 2.50 64 4.8C226 Hytrel 3 9.400 112.80 170.00 338.40 5940.0 671.13 2.50 64 4.8C276 SXB (NBR) 3 7.500 90.00 135.00 270.00 4716.0 532.84 2.88 73 4.2C276 Hytrel 3 15.000 180.00 269.00 540.00 9432.0 1065.67 2.88 73 4.2C280 SXB (NBR) 3 12.000 144.00 216.00 + 7560.0 854.17 3.00 76 3.5C280 Hytrel 3 22.000 264.00 396.00 + 13866.0 1566.65 3.00 76 3.5C285 SXB (NBR) 3 14.600 175.20 262.00 + 9182.0 1037.43 4.00 102 3.2C285 Hytrel 3 26.000 312.00 476.00 + 16660.0 1882.33 4.00 102 3.2C295 SXB (NBR) 3 18.000 216.00 324.00 + 11340.0 1281.25 3.50 89 2.3C295 Hytrel 3 36.000 432.00 648.00 + 22680.0 2562.50 3.50 89 2.3C2955 SXB (NBR) 5 30.000 360.00 540.00 + 18900.0 2135.42 4.00 102 2.3C2955 Hytrel 5 60.000 720.00 1080.00 + 37800.0 4270.83 4.00 102 2.3H TypeH3067 SXB (NBR) 7 53.000 636.00 954.00 + 33396.0 3773.25 4.50 114 2.3H3067 Hytrel 7 75.000 900.00 1348.00 + 47196.0 5332.44 4.00 102 2.3H3567 SXB (NBR) 7 74.000 888.00 1332.00 + 46632.0 5268.72 5.00 127 2.1H3567 Hytrel 7 100.000 1200.00 1799.00 + 63000.0 7118.06 4.50 114 2.1H3667 SXB (NBR) 7 103.000 1236.00 1851.00 + 64812.0 7322.78 5.62 143 1.9H3667 Hytrel 7 140.000 1680.00 2519.00 + 88200.0 9965.28 5.00 127 1.9H4067 SXB (NBR) 7 140.000 1680.00 2520.00 + 88224.0 9967.99 6.25 159 1.8H4067 Hytrel 7 200.000 2400.00 3600.00 + 126000.0 14236.11 5.50 140 1.8H4567 SXB (NBR) 7 190.000 2280.00 + + 119700.0 13524.30 7.00 178 1.5H4567 Hytrel 7 270.000 3240.00 + + 170000.0 19207.45 6.00 152 1.5RRS TypeRRS090 SOX (NBR) 3 .230 2.76 4.11 8.28 144.0 16.27 1.00 25 3.6RRS095 SOX (NBR) 3 .310 3.72 5.50 11.16 194.0 21.92 1.12 28 3.6RRS099 SOX (NBR) 3 .500 6.00 9.10 18.00 318.0 35.93 1.18 30 3.6RRS100 SOX (NBR) 3 .660 7.92 11.90 23.76 417.0 47.11 1.38 35 3.6RRS110 SOX (NBR) 3 1.260 15.12 23.00 45.36 792.0 89.48 1.62 42 3.6RRS150 SOX (NBR) 3 2.000 24.00 35.00 72.00 1240.0 140.10 1.88 48 3.6RRS190 SOX (NBR) 3 2.700 32.40 49.00 97.20 1728.0 195.24 2.12 55 3.6

Performance DataJaw Type Coupling Ratings See chart on page JW-7 for Bronze and Urethane ratings.

MaximumBore

inch mmMax. RPM

x1000Size

Note: + indicates exceeds RPM capacity; see page JW-3 for other speed limits due to the elastomer type.

ElastomericMember

Basic HP Ratings@ Varying RPM

100 1200 1800 3600Numberof Jaws

Torque Ratingin-lbs Nm

Page 21: Catalogo Lovejoy Serie Jaw

JW-21

Jaw Type

JW

Solid Center Spiders Open Center Spiders Snap Wrap Spiders All

Material Available Dimensions Material Available Dimensions Material DimensionsNBR Urethane Hytrel Bronze NBR Ureth. Hytrel Bronze

Size SOX URE HYT BRZ A D H SOX URE HYT BRZ A H NBR AA HH W B

L035 X ..... ..... ..... 0.62 ..... ..... ..... ..... ..... ..... ..... ..... N/A ..... ..... .28 .21L050 X X X ..... 1.07 ..... ..... ..... ..... ..... X 1.07 0.31 N/A ..... ..... .42 .27L070 X X ..... ..... 1.38 ..... ..... X X X X 1.38 0.50 N/A ..... ..... .42 .27L075 X ..... ..... ..... 1.75 ..... ..... X X X X 1.75 0.75 N/A ..... ..... .44 .27L090/L095 X ..... ..... ..... 2.12 .18 0.88 X X X X 2.12 0.88 X 2.56 1.06 .44 .36L099/L100 X ..... ..... ..... 2.54 .25 1.03 X X X X 2.54 1.03 X 3.08 1.37 .61 .43L110 X ..... X ..... 3.31 NBR .25 1.19 X X X X 3.31 1.18 X 3.87 1.50 .75 .45

HYT .18L150 X ..... X ..... 3.75 NBR .31 1.25 X X X X 3.75 1.25 X 4.56 1.75 .88 .59

HYT .21L190 X ..... X ..... 4.50 NBR .31 1.38 X X X X 4.50 1.38 X 5.18 2.25 .88 .60

HYT .18L225 X ..... X ..... 4.98 NBR .38 1.75 X X X X 4.98 1.75 URE. 5.44 2.75 .88 .73

HYT .18L276 ..... ..... ..... ..... ..... ..... ..... X ..... ..... X 6.19 1.75 N/A ..... ..... 1.45 .75

Elastomers In Compression (Spiders)

Dimensional Data

Notes: 1. X indicates Available.2. See pages JW-3 and JW-7 for more information on spiders.

Elastomer Dimensional Data—Inch

Page 22: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-22

JW

MomentLength Set Set of Inertia

Outer Overall Thru Hub Screw Collar Screw Weight lbs WR2

Style Bore Dia. Length Gap Bore Dia. Clearance Location Dia. Size Min. Max. lb-in2

Size No. Min. Max. OD OAL G LTB HD CL SL CD T Bore Bore (Solid)L035 1 .125 .375 .63 .81 0.28 0.27 0.63 N/A 0.13 N/A #6-32 0.1 0.1 .003L050 1 .250 .625 1.08 1.71 0.48 0.62 1.08 N/A 0.31 N/A 1/4-20 0.3 0.2 .054L070 1 .250 .750 1.36 1.98 0.48 0.75 1.36 N/A 0.38 N/A 1/4-20 0.6 0.4 .115L075 1 .250 .875 1.75 2.13 0.50 0.82 1.75 N/A 0.31 N/A 1/4-20 1.0 0.8 .388L090 1 .250 1.000 2.11 2.15 0.52 0.82 2.11 N/A 0.44 N/A 1/4-20 1.5 1.2 .772L095 1 .437 1.125 2.11 2.51 0.52 1.00 2.11 N/A 0.44 N/A 5/16-18 1.8 1.3 .890L099 1 .437 1.188 2.54 2.84 0.71 1.06 2.54 N/A 0.44 N/A 5/16-18 2.5 2.0 2.048L100 1 .437 1.375 2.54 3.48 0.71 1.38 2.54 N/A 0.44 N/A 5/16-18 3.2 2.4 2.783L110 1 .625 1.625 3.32 4.22 0.88 1.68 3.32 N/A 0.75 N/A 3/8-16 6.6 5.3 8.993L150 1 .625 1.875 3.75 4.50 1.00 1.75 3.75 N/A 0.75 N/A 3/8-16 8.8 7.0 11.477L190 2 .750 2.125 4.50 4.86 1.00 1.94 4.00 N/A 0.88 N/A 1/2-13 15.3 12.3 39.256L225 2 .750 2.625 5.00 5.34 1.00 2.18 4.25 N/A 1.00 N/A 1/2-13 19.6 15.0 65.000L276 2 .875 2.875 6.18 7.82 1.58 3.12 5.00 N/A 1.56 N/A 1/2-13 40.0 30.5 188.000

C226 3 .875 2.500 5.15 7.00 1.50 2.75 4.12 .12 1.38 5.50 1/2-13 29.0 22.0 74C276 3 .875 2.875 6.18 7.87 1.63 3.12 5.00 .12 1.56 6.53 1/2-13 47.0 36.0 188C280 3 1.250 3.000 7.50 7.87 1.63 3.12 5.50 .12 1.56 7.81 1/2-13 61.0 49.0 362C285 3 1.250 4.000 8.50 9.13 1.63 3.75 6.50 .12 1.75 8.88 5/8-11 87.0 68.0 642C295 3 1.500 3.500 9.12 9.38 1.88 3.75 6.25 .12 1.88 9.62 5/8-11 97.0 78.0 862C2955 3 1.750 4.000 9.12 10.38 1.88 4.25 7.12 .12 2.12 9.62 5/8-11 117.0 90.0 932

H3067SXB(NBR) 3 2.125 4.500 10.00 11.62 2.12 4.75 7.00 .12 2.37 10.68 5/8-11 162.0 123.0 1485HYTREL 2.125 4.000 10.00 11.62 2.12 4.75 7.00 .12 2.37 10.68 5/8-11 162.0 123.0 1485H3567SXB(NBR) 3 2.625 5.000 11.00 12.38 2.38 5.00 7.75 .12 2.50 11.68 5/8-11 246.0 195.0 2174HYTREL 2.625 4.500 11.00 12.38 2.38 5.00 7.75 .12 2.50 11.68 5/8-11 246.0 195.0 2174H3667SXB(NBR) 3 3.000 5.625 12.00 13.88 2.62 5.63 8.75 .12 2.81 12.45 3/4-10 262.0 190.0 3591HYTREL 3.000 5.000 12.00 13.88 2.62 5.63 8.75 .12 2.81 12.45 3/4-10 262.0 190.0 3591H4067SXB(NBR) 3 3.250 6.250 13.25 15.38 2.88 6.25 9.75 .12 3.12 14.00 3/4-10 390.0 291.0 6287HYTREL 3.250 5.500 13.25 15.38 2.88 6.25 9.75 .12 3.12 14.00 3/4-10 390.0 291.0 6287H4567SXB(NBR) 3 3.500 7.000 14.50 17.12 3.12 7.00 10.75 .12 3.50 15.75 3/4-10 575.0 435.0 10565HYTREL 3.500 6.000 14.50 17.12 3.12 7.00 10.75 .12 3.50 15.75 3/4-10 575.0 435.0 10565

Dimensional Data

L Type, C Type & H Type Couplings

Notes: 1. N/A indicates not applicable.2. Maximum bore is less for H Type couplings with Hytrel due to increased torque capacity.3. Jaw coupling hubs are standard with one set screw, for two set screws see RRS & RRC sections.4. See pages JW-7 and JW-20 for Performance Data.

Style 1 Style 2 Style 3

Dimensional Data—Inch

Page 23: Catalogo Lovejoy Serie Jaw

JW-23

Jaw Type

JW

MomentLength Set Set of Inertia

Outer Overall Jaw Thru Hub Clear- Screw Collar Screw WR2

Style Bore Dia. Length Gap Bore Dia. ance Location Dia. Size Weight lbs lb-in2

Size No. Min. Max. OD OAL G LTB HD CL SL CD T Solid Max. Bore (Solid)

Dimensional Data

Style 1 Style 2

Style 1

LC Type Couplings

LC Type Dimensional Data—Inch

MomentLength Set Set of Inertia

Outer Overall Jaw Thru Hub Clear- Screw Collar Screw WR2

Style Bore Dia. Length Gap Bore Dia. ance Location Dia. Size Weight lbs lb-in2

Size No. Min. Max. OD OAL G LTB HD CL SL CD T Solid Max. Bore (Solid)

LC090 1 .250 1.00 2.11 2.12 .50 .81 2.11 N/A .44 2.54 1/4-20 1.5 1.2 .772LC095 1 .437 1.12 2.11 2.50 .50 1.00 2.11 N/A .44 2.54 5/16-18 1.8 1.3 .890LC099 1 .437 1.18 2.53 2.87 .75 1.06 2.53 N/A .44 3.11 5/16-18 2.5 2.0 2.048LC100 1 .437 1.37 2.53 3.50 .75 1.38 2.53 N/A .44 3.11 5/

16-18 3.5 2.5 2.783LC110 1 .625 1.62 3.31 4.25 .87 1.69 3.31 N/A .75 3.81 3/8-16 6.6 5.0 8.993LC150 1 .625 1.88 3.75 4.50 1.00 1.75 3.75 N/A .75 4.41 3/8-16 9.1 7.0 11.477LC190 2 .750 2.12 4.50 4.88 1.00 1.94 4 00 N/A .88 5.01 1/2-13 17.0 13.0 39.256LC225 2 .875 2.62 5.00 5.38 1.00 2.19 4.25 N/A 1.00 5.61 1/2-13 23.0 18.0 65.003

AL Type Dimensional Data—Inch Style 2

AL050 1 .250 .625 1.08 1.60 .48 .62 1.08 N/A .31 N/A 1/4-20 0.2 0.2 0.020AL070 1 .250 .750 1.36 2.00 .50 .75 1.36 N/A .38 N/A 1/4-20 0.3 0.2 0.040AL075 2 .250 .875 1.75 2.12 .50 .81 1.53 N/A .31 N/A 1/4-20 0.4 0.3 0.121AL090 2 .500 .875 2.12 2.34 .52 .91 1.53 N/A .34 N/A 1/4-20 0.5 0.4 0.271AL095 1 .500 1.125 2.12 2.50 .50 1.00 2.12 N/A .44 N/A 5/16-18 0.8 0.6 0.336AL099 2 .500 1.187 2.53 2.81 .75 1.03 2.06 N/A .44 N/A 5/16-18 1.0 0.8 0.644AL100 2 .500 1.375 2.53 3.50 .75 1.37 2.41 N/A .44 N/A 5/16-18 1.5 1.1 1.207AL110 1 .625 1.625 3.31 4.25 .87 1.69 3.31 N/A .75 N/A 5/16-18 2.7 2.1 3.531AL1502 2 .625 1.875 4.25 4.50 1.00 1.75 3.19 N/A .63 N/A 5/16-182 3.7 2.8 7.002

Notes: 1. N/A indicates not applicable2. Two set screws provided with AL150.3. See pages JW-7 and JW-20 for Performance Data.

Note: N/A indicates not applicable

AL Type Coupling

Page 24: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-24

JW Hub Length Hub Set SetOuter Overall Thru Step Screw Collar Screw

Style Bore Diameter Length Spacer Bore Diameter Clearance Location Diameter Size WeightSize No. Min. Max. OD OAL S LTB HD CL SL CD T lbs.

RRS090 1 .250 1.000 2.11 5.12 3.50 .81 ..... .09 .43 2.50 1/4-20 1.76.62 5.00 1.88.62 7.00 1.9

RRS095 1 .437 1.125 2.11 5.50 3.50 1.00 ..... .09 .43 2.50 5/16-18 1.97.00 5.00 2.09.00 7.00 2.1

RRS099 1 .437 1.187 2.53 5.62 3.50 1.06 ..... .12 .44 3.12 5/16-18 2.27.12 5.00 2.59.12 7.00 2.8

RRS100 1 .437 1.375 2.53 6.25 3.50 1.38 ..... .12 44 3.12 5/16-18 3.27.75 5.00 3.59.75 7.00 3.8

RRS110 1 .625 1.625 3.31 6.88 3.50 1.68 ..... .12 .75 3.81 5/16-18 6.28.36 5.00 6.6

10.36 7.00 7.2RRS150 2 .625 1.875 3.75 7.00 3.50 1.75 ..... .12 .62 4.44 3/8-16 12.2

8.50 5.00 15.710.50 7.00 20.3

RRS190 3 .750 2.125 4.50 7.38 3.50 1.94 4.00 .12 .88 5.00 1/2-13 23.08.88 5.00 28.2

10.88 7.00 35.0RRS225 3 .750 2.625 5.00 7.88 3.50 2.18 4.25 .12 1.00 5.62 1/2-13 26.5

9.38 5.00 33.011.38 7.00 41.4

RRC226 4 .875 2.125 5.16 9.19 3.50 2.84 4.12 N/A 1.38 5.50 1/2-13 37.010.68 5.00 43.012.68 7.00 49.0

RRC276 4 .875 2.875 6.18 8.60 3.50 2.47 5.00 N/A 1.00 6.50 1/2-13 52.09.94 5.00 59.0

11.94 7.00 69.0RRC280 4 1.250 3.375 7.50 8.50 3.50 2.47 5.50 N/A 1.00 7.81 1/2-13 66.0

9.94 5.00 75.011.94 7.00 87.0

RRC285 4 1.250 4.125 8.50 9.31 3.50 2.87 6.50 N/A 1.00 8.88 1/2-13 92.010.75 5.00 104.012.75 7.00 121.0

RRC295 4 1.500 4.125 9.12 9.50 4.00 2.75 6.50 N/A 1.38 9.56 1/2-13 100.010.50 5.00 112.012.50 7.00 128.0

RRC2955 4 1.750 4.125 9.12 9.50 4.00 2.75 6.50 N/A 1.88 9.56 5/8-11 96.010.50 5.00 111.012.50 7.00 132.0

Dimensional Data

RRS & RRC Type Dimensional Data—Inch

Notes: 1. N/A indicates not applicable.2. See pages JW-7 and JW-20 for Performance Data.

ss

s

Style 1

Style 3 Style 4

Style 2

Page 25: Catalogo Lovejoy Serie Jaw

Standard Dimensions Special DimensionsComplete Couplings Hub Complete Couplings Hub

Size Overall Length Length Thru Bore Overall Length Length Thru Bore(OAL) (LTB) (OAL) (LTB)

L050 1.720 .62 1.10 .311.34 .432.24 .88

L070 2.000 .75 1.23 .383.00 1.25

L095 2.500 1.00 3.86 1.68L100 3.500 1.375 7.99 3.62L110 4.250 1.69 2.37 .75

2.47 .806.63 2.88

Distance OverallBetween Length Spacer Spacer

Style Bore (mm) Shafts OAL Weight WeightSize No. Min. Max. S mm mm lbs. Kg.RRS090 1 12 25 100 141 .83 .38

140 181 1.21 .55180 221 1.59 .79

RRS095 1 14 28 100 151 .83 .38140 191 1.21 .55180 231 1.59 .79

RRS099 1 15 30 100 154 1.08 .49140 194 1.63 .74180 234 2.17 .98

RRS100 1 15 35 100 170 1.08 .49140 210 1.63 .74180 250 2.17 .98

RRS110 1 19 42 100 186 1.64 .74140 226 2.55 1.16180 266 3.48 1.58

RRS150 2 28 48 100 189 5.92 2.69140 229 9.54 4.33180 269 13.19 5.98

RRS190 2 28 55 100 199 8.75 3.97140 239 14.00 6.35180 277 19.26 8.74

RRS225 2 32 65 100 221 10.83 4.91140 261 17.49 7.93180 291 24.18 10.97

JW-25

Jaw Type

JW

Dimensional Data

Lovejoy has available special length versions of selected sizes of the L Type Jaw Coupling hubs.

Notes: 1. For ordering information on any special length jaw hub, please contact Lovejoy Customer Service.2. The Overall Length is calculated using two hubs with the same length thru bore.

Special Length L Type Hubs

RRS Dimensional Data—Metric Spacers

Note: See pages JW-7 and JW-20 for Performance Data.

Page 26: Catalogo Lovejoy Serie Jaw

Jaw Type

JW-26

JW