catálogo general ritz puesta a tierra transitoria

Successor of RITZ-CHANCE

Ref.: ATR-031I-01

ISO 9001

TEMPORARY GROUNDING EQUIPMENTTEMPORARY GROUNDING EQUIPMENT

Sucessora da RITZ-CHANCE

01

Note: Since the Ritz do Brasil has a policy of continuous product improvement, it reserves the right to change design and specifications without notice.

INDEX

Product Page

- Grounding Clamps 05 to 09

- Cluster Grounding Clamps 10

- Suspension Cluster 11

- Accessories 12 to 14

- Sectional Hot Sticks 15

- Grip-All Clampsticks (Shotgun) 16 - 17

- Heads 18

- Conditioning 19

- AC Voltage Detectors 20

- Grounding and Temporary Short-Circuiting Stick for Secondary Systems (LV) 21

- Grounding and Temporary Short-Circuiting Equipment for Secondary Systems (LV) 22

- Overhead Distribution Grounding Set with Pressure-Type Terminals 23

- Grounding and Temporary Short-Circuiting for Transformer Jumper - 15 kV Class 24

- Grounding and Temporary Short-Circuiting - Cemig Standard 25

- Light Grounding and Temporary Short-Circuiting for Distribution Systems up to 34,5 kV 26

- Standard Grounding and Temporary Short-Circuit for Distribution Systems up to 34,5 kV 27 - 29

- Standard Grounding and Temporary Short-Circuiting for Distribution Systems up to 22 kV 28, 30 - 31

- Grounding and Temporary Short-Circuiting with Telescopic Stick for Distribution Systemsup to 34,5 kV 32

- Grounding and Temporary Short-Circuiting with Sectional Stick for Distribution Systemsup to 34,5 kV 33

- Grounding and Temporary Short-Circuiting for Transmission Lines up to 500kV Towers 34

- Grounding and Temporary Short-Circuiting with Sectional Stick for Transmission Lines upto 138 kV, Wooden, Concrete or Metallic Structures 35

- Grounding and Temporary Short-Circuiting for Substations 36

- Grounding and Temporary Short-Circuiting for Cubicles - 15 kV Class 37 - 38

- Socket Ball Clamp for Temporary Grounding 39

- Sequence of Temporary Grounding and Short-Circuiting Set Installation - Overhead Lines 40

Sucessora da RITZ-CHANCE02

OVERALL GOALS, OBJECTIVES AND OPERATING PRINCIPLES OF

RITZ DO BRASIL

We want to conduct a successful, diversified and growing

manufacturing business in products and services, that

contributes importantly to the uninterrupted supply of

electrical energy all over the world, always having in mind

the absolute safety of all electricians and workmen

involved in that activity.

EMIL RITZDirector President


03

ISO 9001 - CERTIFICATIONOur QUALITY is your SAFETY

Sucessora da RITZ-CHANCE04

40 Years of History The history of RITZ DO BRASIL S.A., began with the arrival of the

young and determined Austrian engineer, Emil Ritz, to Brazil, in 1950. Initially established in Porto Alegre and So Paulo, he transferred

to Belo Horizonte in 1955 as a sales representative. In 1960, he founded the company RITZ COMRCIO E INDSTRIA LTDA., pioneer in Brazil in the manufacturing of thermo-elements for measurement of temperature of liquid steel. This innovating spirit has been a key success factor of the company over the years.

RITZ DO BRASIL S.A. was the first Brazilian company to manufacture::

1960 - MICRO THERMO-ELEMENTS FOR THE STEEL-INDUSTRY 1967 - FIBERGLASS CYLINDERS FOR HV-BREAKERS 1968 - CAST EPOXY INSULATORS 1971 - HOT LINE TOOLS & GROUNDING EQUIPMENT 1972 - HV-DETECTORS 1978 - FIBERGLASS LADDERS 1982 - INSULATED HYDRAULIC LIFTING UNITS

Since 1973, RITZ DO BRASIL S.A., is located in the industrial district of Betim, close to Belo Horizonte, on the highway from Belo Horizonte to So Paulo. It was the first industry to settle in this area. In that same year, the company made a joint-venture with the well known American company A. B. CHANCE. During the 16 years of association, the entire technology and manufacturing know-how for all HOT LINE TOOLS (for power distribution networks, substations and transmission lines up to 800 kV) was successfully trasnsferred to the Brazilian company. The registered trademark

is respected by all customers as a symbol of high quality products manufactured according to international technical standards and under a ISO 9001 certified quality system.

The selection criteria of its sub-suppliers and a rigorous quality control of the incoming raw materials, the in-process controls and the final testing at the in-house laboratories, guarantee the quality of the products manufactured by RITZ DO BRASIL S.A.

The administrative building of RITZ DO BRASIL S.A., was constructed as a copy of the large mansions of the coffee-barons of Brazilian colonial times. Trees and green fields found throughout the premises provide an aggreeable working atmosphere where the RITZ QUALITY achieves a deeper meaning covering not only the products but also environment and leisure activities of the RITZ-TEAM.

4040

ANOSANOS

ISO 9001

for overhead distribution systems


03

GRAMPOS DE ATERRAMENTOSucessora da RITZ-CHANCE

05

GROUNDING CLAMPS

Smooth jaws, Bronzeeyescrew with finethreads, Bronze pressure-type terminal.

G1810-2

1 - Body 2 - Terminal and fastener screw

CATALOG N

MATERIAL

G3403-B G3403-BT

ALUMINUM-1BRONZE-2

ALUMINUM-1BRONZE-2

350 35028.000 28.00020.000 20.000

47722,5

6CU/4CA

47722,5

6CU/4CA4,0 4,0

70 7016 163,0 3,0

0,48 0,48Weight Each (kg)Recommended Torque (kgf/m)Jumper Range - Min. (mm)Jumper Range - Max. (mm)

Main Line Range - Min. ( mm)

Main Line Range-Max.

Fault Current -30 Cycles (A)Fault Current -15 Cycles (A)Continuous Current (A)

(MCM-CAA)( mm)(AWG)

Connection through bronzeeye screw, bronze pressure-type terminals.

G1710G3403-B

T-handles for manual connectionto grounded structure, bronzepressure-type terminals.

G3403-BT G1710-T

Spring-pressure-type, quickcontact to be used withDST-1/U cluster.

GAR-2

G1710-TG1710

BRONZE BRONZE

200 20012.000 12.0008.000 8.000

4,0 4,0

25 2516 162,3 2,3

0,45 0,45

336,419,0

6CU/4CA

336,419,0

6CU/4CA

G1810-2

ALUMINUM-1BRONZE-2

28.00020.000

4,0

25

0,6

300

70

3,0

--14,58

6CU/4CA

GAR-2

ALUMINUM--

6.800

4,0- - -

0,35

336,419,0

6CU/4CA

Grounding Clamp FIXED ON RITZGLAS POLESSeries G3403-B, G1710 and G1810-2

SINGLE MODEL EXTENSION MODEL TELESCOPIC MODELwithout extension with sectional extension with telescopic extension

25mm

25mm

CAT. NHG3403-BFHG1710-F

HG1810-2F

1.25

0mm

1.25

0mm

1.25

0mm

Note: Other lengths can be ordered

Notes: 1 - Intermediary section can be

ordered to 32 x 1.250mm RITZGLAS stick.

2 - Base section 32 x 1.450 mm, RITZGLAS stick, with

sliding - proof handle.

Extended length: 1.800mmRetracted length: 1.090mm

CAT. N

CAT. N

CAT. N

HG3403-BV

VMR/L-I

VMR/L-P

HG1710-VHG1810-2V

CAT. NHG3403-BTL-18HG1710-TL-18

HG1810-2TL-18

Extension section 25mm

Base section 25mmwith sliding-proof handle

G3622-1 C600-0434Quick fitting by spring and connection through bronzeeyescrew, bronze pressure-type terminal.

Serrated interchangeable jaws, quick fitting by spring,connection through bronze eyescrew, bronze pressure-typeterminal.

C600-0965

1 - Body2 - Fastener screw


06

GROUNDING CLAMPS

Serrated interchangeable jaws, bronze eyescrew, bronzepressure-type terminal.

C600-0065Serrated interchangeable jaws cable connection, withterminal threads.

CATALOG N G3622-1 C600-0434 C600-0065 C600-0965

MATERIAL ALUMINUM-1BRONZE-2400

35.00025.000

95253,0 3,0

90029,0

6

150038,0

6

95430,0

6

95430,0

64,0 4,0 4,0 4,0

0,68

ALUMINUM-1BRONZE-2

ALUMINUM-1BRONZE-2

ALUMINUM-1BRONZE-2

40040.00030.000

95

0,90

25 25

40040.000

30.000

95

3,00,50

40040.00030.000

95253,0

0,72

for transmission lines

Continuous Current (A)

Main Line Range - Max.

Weight Each (kg)Recommended Torque (kgf/m)

Jumper Range - Max. (mm)Main Line Range - Min. ( mm)

Fault Current -30 Cycles (A)Fault Current -15 Cycles (A)

Jumper Range - Min. (mm)

(MCM-CAA)( mm)(CU)


07

GROUNDING CLAMPS

All-angle, allowing it to be used in continuous angles up to 75 left or right, serrated jaws, bronze eye-screw, bronze pressure-typeterminal.

NEW MODELS: with pre-adjustable angles locking system and fixed by butterfly nut, bronze pressure-type terminal, bronze eyescrew.

CATALOG N G4229-1SJ G4228-10SJ G4229-1/EL* G4228-10/EL*

MATERIAL ALUMINUM-1BRONZE-2400

40.00030.000

95253,0 3,0

95430,0

--2

95430,0

--2

--73,0

2 1/22

--73,0

2 1/22

6,5 6,5 6,5 6,5

1,10

ALUMINUM-1BRONZE-2

ALUMINUMAND BRONZE

ALUMINUMAND BRONZE

40040.00030.000

95

1,70

25 25

40040,000

30.000

95

3,01,87

40040.00030.000

95253,0

2,60

1 - Body 2 - Fastener screw* New eyescrew model, which can be used with a hot stick with a ME-U head or a VMR-0198 head.

G4228-10SJG4229-1SJ

G4229-1/EL G4228-10/EL

for substations and transmission lines


Main Line Range - Max.(MCM-CAA)( mm)(IPS)(CU)





CATALOG N

MATERIAL

1 - Body2 - Teminal and fastener screw.

G3367-1Bronze body

G3367-2Aluminum body

G3368

To be used in rectangular or circular busbar.Bronze eyescrew, bronze pressure-type terminal.

With movable jaw, allowing a larger variety ofconnections, with bronze eyescrew, bronzepressure-type terminal.

Adjustable bracket two terminals for twin groundingcable, bronze eyescrew, pressure-type terminal

G3369

Movable adjustable bracket, bronze eyescrew, bronzepressure-type terminal.

C600-0337

ALUMINUM-1BRONZE-2

400

30.00040.000

50 or 12 x 100 59525

G3368

3,01,00

40040.00030.000

1689095253,53,5

3,30

BRONZE ALUMINUM-1BRONZE-2ALUMINUM-1BRONZE-2

400400 400

30.00030.000 30.00040.00040.000 40.000

55 109595 952525 25

3,0 3,01,102,50 2,20

63,563,5 100

G3369G3367-2G3367-1 C600-0337

ALUMINUM-1BRONZE-2


08

GROUNDING CLAMPSfor substations


Main Line Range - Max. ( mm or mm)





G3363 - 2 G3363 - 3SJThe serrated jaws are suitable for connection to metallicstructures, extra fastener screw for a better electric contact,bronze pressure-type terminal

G3363-1C600-1617 C600-0085Greater contact area, for metallic structuresconnection, movable bracket which fits toeven and inclined shapes, bronze pressure-type terminal, bronze T-handle.

For connection to grounding rod,metallic structures or ground net.Bronze pressure- type terminal, bronzeT-handle.

Aluminum body and retainer, Bronzescrubber-type contact pads, BronzeT-handle with fine threads, Bronzepressure-type terminal.

CATALOG N

MATERIAL

G3363-2

ALUMINUM-1BRONZE-2

40040.00030.000

95253,0

38

3,2

0,80

G3363-3SJ

3,0

38

3,2

ALUMINUM-1BRONZE-2

ALUMINUM-1BRONZE-2

ALUMINUM-1BRONZE-2

400 40040040.00043.000 25.000

25.00038

3,295253,0

0,75

30.00030.000102

51107333,01,1

95

0,75

25

C600-1617

25,4

3,0

25

BRONZE

40040,000

30.000

95

3,01,22

G3363-1C600-0085 G3363-4SJ

BRONZE

40040.00030.000 32

5,095253,0

1,09

1 - Body 2 - Terminal and screw fastener* for connection to grounding rod and for CAR/ST-04 grounding cable conditioning.


09

GROUNDING CLAMPS

CF-1 *Metallic fixing reel, for groundingcables with bronze clamp, fixed bybronze-handle.Aprox. Weight: 1,85 kg.

Aluminum body, Serrated jaws,Bronze T-handle with fine threads,Bronze pressure-type-terminal.

for connection to earth

G3363-4SJ


Main Line Range - Max. (mm)


Jumper Range - Max. (mm)Main Line Range - Min. (mm)




10

CLUSTER GROUNDING CLAMPS

HG 39013-Cluster (small)

G34053-Cluster Set

G38033-Cluster Set

With Snap-On (Duckbill-type) Aluminum-body clamps. Smooth jaws, Bronzeeyescrews with fine threads, and3-phase Aluminum cluster bar withBronze Pressure-type terminals.

Aluminum Bodied, Snap-On Grounding Clamp. Equipped with cable-insulation anchor straps to provide a positive grip on the grounding cable.

With C-Type Aluminum-boldy clamps.Smooth jaws, Bronze eyescrews withAcme threads, and 3-phase Aluminumcluster bar with Bronze Pressure-type-terminals.

CATALOG N

MATERIAL ALUMINUM350 400 400

20.000 25.000 25.00028.500 36.000 35.000

3,0 3,0 3,0

63624,0

8

90029,0

6

90029,0

6

3,0 4,0 4,0

70 95 9525 25 25

G3405

2,00 3,00 5,45

ALUMINUMALUMINUM

G3803 HG 3901


Main Line Range - Max.(MCM-CAA)(mm)(CU)





SADDLE CLUSTERS

A greater efficiency in performing a grounding work depends on the procedures used to connect the clamps tothe conductors. RITZ DO BRASIL suspension clusters allow the clamps to be raised simultaneously, providinga safe and quick work sequence.

Allow placing of an intermediary grounding point on the structure. Available in 3 models, as follows.


11

SUSPENSION CLUSTERS

DST - 1/U DST - 3

DST - 4 G4754-1

DST - 5 DST - 5V DST - 6

Suitable for installation and removal of springpressure-type grounding clamps of GAR-2. It has an universal fitting, adaptable to hot-stick with CS-U head.Approximate Weight: 0,49 kg.

Light model, aluminum body, bronze pressure-typeterminals for cabels up to 25mm, suitable forG-1710 clamps.Approximate Weight: 0,45kg

Aluminum body, bronze pressure-type terminals, for cables up to 70mm, suitable for G-3403/B clamps.Approximate Weight: 0,62 kg.

Terminal block for 4 bronze pressure-type terminals,for grounding cables from 16mm to 95mm.Approximate Weight: 0,90 kg.

Aluminum body, with steel chain and fastening handle granting good electrical contact to the steel-structure.

Approximate Weight: 3,40 kg

Aluminum body, with steel chainand quick locking system.

Approximate Weight: 2,67 kg.

Economic model, CEMIG Standard,with hot galvanized steel plate.

Approximate Weight: 1,60 kg

CLUSTER SUPPORT, 1 - TERMINAL TYPEConveniently hangs grounding sets on the pole to facilitate lifting clamps - one at a time to the conductors. Accepts plain ferrules on 25 to 95mm grounding cable. Copper bar length is 279mm.

Catalog NC600-0152 Ground Cluster Support 4.3 kg

Description Weight

C600-0152

C600-0617

Clamp resting support - HANGER STUDS

GROUND RODS

Lifting tools for substation grounding jobs

Hanger studs are mounted on the main clamp and permit additional clamps to be fixed and elevated to the conductor through the main clamp. It is a safe way to improve the speed of grounding process. Those hanger studs can be mounted on any type of RITZ clamps, except small models G-1710. The C600-0080 stud is to be used with clamps with threaded terminal.

CATALOG NG3625G3626

C600-0080

MATERIALALUMINUMALUMINUM

BRONZE

APPROXIMATE WEIGHT0,04 kg.0,04 kg.

0,145 kg.


12

ACCESSORIES

G3625 (set) G3626 (pc) C600-0080 (pc)

SCREW GROUND RODGT3370

SCREW GROUND RODGT3370-10

GROUND RODGT3370-PS

Copperweld rod, 17 1mm diameter and 1.500mm total length, steel-tube handle, d ismountab le fo r easier conditioning, brass-thread.


Cooperweld rod, 17 1mm diameter and 1 . 0 0 0 m m t o t a l length, brass thread. I t s h a n d l e i s dismountable for an easier conditioning.


19mm haxagonal sections hot dip ga l van i zed -s tee l 1.200mm length. With steel head to be ins ta l led w i th a hammer.


C600-0619 C600-0618

C600-0620Extension Pole

C600-0621Bottom Pole

This is a complete set for grounding substation busbars, when de-energized for maintenance.

Mounted large capacity busbar clamps are available in 2 sizes to reach any manageable height.

A plastisol coated shepherd Hook lift stick is available to reduce the effort required to raise and install the clamps on the overhead busbar.

Cables, ferrules and small grounding clamps should be ordered separately.

ACCESSORIES:C600-0617 - Lift hook assembly, 32 x 2.640mm RITZGLAS pole, includes

block and rope assembly.C600-0620 - 32 x 3.650mm Extension Pole (middle section).C600-0621 - 32 x 2.430mm Bottom Pole.

30.000 30.000

CATALOG NMATERIAL

Pole dimensions (mm)

ALUMINUM400 400

43.000 43.000

3,0 3,0

168 114114 9,3295 9525 25

C600-0618

4.5 kg32 x 2.742

4.2 kg32 x 2.690

ALUMINUMC600-0619

T600-0891 - Electrostatic Grounding Set Pre-assembled for ready use, includes:

- RITZGLAS handle (1.066 x 32mm);- Copper contact hook;- T-handle aluminum grounding clamp with 38mm flat face jaws;

- Extra-flexible copper Grounding cable, with yellow Neoprene jacket and Copper terminal at each end;

- Weight: 3,2 kg.

T600-0891Electrostatic

Grounding SetWeight each: 3.2 kg.


Main Line Range - Max. (mm)

Recommended Torque (kgf/m)




Weight Each (kg)


13

ACCESSORIESGrounding cables and FerrulesCopper CableExtra-flexible, available in crystal-clear (PVC) insulation providing an easy inspection of the copper-strands of the cable.

Can be supplied also with orange insulation granting better visibility of the temporary grounding equipment.

Aluminum CableExtra-flexible, much lighter (compared with equivalent copper cable) supplied with crystal-clear PVC insulation, providing an easy inspection of the aluminum strands of the cable.Note: The aluminum cables are supplied in predetermined lengths and with the correct ferrules pressed over the cable in our factory to grant perfect electric connection.

Copper ferrules:

Plain-plug typefor pressure-type grounding-clamps terminal

Shrouded plain copper ferrules Unshrouded plain copper ferrules

Threaded-stud typefor tapped or drilled grounding-clamps terminals

Shrouded threaded copper ferrules Unshrouded threaded cooper ferrules

CATALOG N

CTC-16 3.5 16 10,03 220,0025 11,52 318,0035 12,90 421,00507095

14,5317,0019,03

573,00793,00

1.036,00

CTC-25 6.0CTC-35 8.0CTC-50 12.0CTC-70 16.0CTC-95 20.0

SECTION(mm)

SHORT CIRCUITRATING (kA/1s)

EXTERNAL CA.(mm)

WEIGHTCA

(kg/km)

CAT.N

CTA-50 7.0CTA-120 17.5

SECTION(mm)

EXTERNALDIAMETER

(mm)

APPROX.WEIGHT(kg/km)

50120

1521

225518

SHORT CIRCUITRATING (kA/1s)

1 unit each,not installedCatalog No.C600-2630 #2 C600-2630A

C600-2631AC600-2632AC600-2633A

1/02/04/0

C600-2631C600-2632C600-2633

CableSize,AWG

2 unitsinstalled

Catalog No.

1 unit each,not installedCatalog No.C600-2622 #2 C600-2622A

C600-2623AC600-2624AC600-2625A

1/02/04/0

C600-2623C600-2624C600-2625

CableSize,AWG

2 unitsinstalled

Catalog No.

1 unit each,not installedCatalog No.


C600-2614

C600-2606

#2

#2

C600-2614A

C600-2606A

C600-2615A

C600-2607A

C600-2616A

C600-2608A

C600-2617A

C600-2609A

1/0

1/0

2/0

2/0

4/0

4/0

C600-2615

C600-2607

C600-2616

C600-2608

C600-2617

C600-2609

CableSize,AWG

CableSize,AWG

2 unitsinstalled

Catalog No.

2 unitsinstalled

Catalog No.

For 2 units installed, specify cable and length


ALUMINUM FERRULESPlain-plug typefor pressure-type grounding-clamp terminals

Shrouded plain aluminum ferrules

Threaded-stud typefor tapped or drilled grounding-clamp terminals

Shrouded threaded aluminum ferrules

Unshrouded threaded aluminum ferrules


14

ACCESSORIES





C600-2626

C600-2618

C600-2610

C600-2602

#2

#2

#2

#2

C600-2626A

C600-2618A

C600-2610A

C600-2602A

C600-2627A

C600-2619A

C600-2611A

C600-2603A

C600-2628A

C600-2620A

C600-2612A

C600-2604A

C600-2629A

C600-2621A

C600-2613A

C600-2605A

1/0

1/0

1/0

1/0

2/0

2/0

2/0

2/0

4/0

4/0

4/0

4/0

C600-2627

C600-2619

C600-2611

C600-2603

C600-2628

C600-2620

C600-2612

C600-2604

C600-2629

C600-2621

C600-2613

C600-2605

CableSize,AWG

CableSize,AWG

CableSize,AWG

CableSize,AWG

2 unitsinstalled

Catalog No.

2 unitsinstalled

Catalog No.

1 ferrule withheat shrink applied,

Catalog No.C600-1658 #2 P600-1593

P600-1593P600-1593P600-1593

1/02/04/0

C600-1659C600-1660C600-1661

CableSize,AWG

Shrink Tubing only(5-inch length),

Catalog No.

1 ferrule withheat shrink applied,

Catalog Nr.C600-1662 #2 P600-1593

P600-1593P600-1593P600-1593

1/02/04/0

C600-1663C600-1664C600-1665

CableSize,AWG

Shrink Tubing only(5-inch length),

Catalog Nr.

2 unitsinstalled

Catalog No.

2 unitsinstalled

Catalog No.

Visual inspection of cable condition through clear heat-shr ink tube determines breakage or corrosion that otherwise requires continuity test. Factory-assembled units expose 1/2of cable strands at junction point.

Visual inspection of cable condition through clear heat-shr ink tube determines breakage or corrosion that otherwise requires continuity test. Factory-assembled units expose 1/2of cable strands at junction point.

Unshrouded plain aluminum ferrules

Shrink tubingon Unshrouded plain aluminum ferrulesClear heat-shrink tubes provide corrosion-inhibitor by excluding moisture and stress-relief for cable jacket and ferrule-to-stranding connection.


Shrink tubingon Unshrouded threaded aluminum ferrulesClear heat-shrink tubes provide corrosion-inhibitor by excluding moisture and stress-relief for cable jacket and ferrule-to-stranding connection.

Total length 1.450mm (ALL SECTIONS)Working Length 1.250mm

Top-section with UNIVERSAL HEAD CS-U

Working Length 1.250mm

Intermediary section

Working Length 1.450mm

Base Section

STANDARD Model:

LIGHT MODEL - Exclusivity of RITZ DO BRASIL

Catalog N

VMR-15VMR-30VMR-45VMR-70VMR-90

Description

Hot Stick - 1 sectionHot Stick - 2 sections (base + top)Hot Stick - 3 sections (base + intermediary + top)Hot Stick - 4 sections (base + 2 intermediary + top)Hot Stick - 5 sections (base + 3 intermediary + top)

Overalllength(mm)1.2502.7003.9505.2006.450

Max.Voltage

(kV)20

150300400500

Approx.Weight

(kg)0,902,303,504,705,90

Catalog N

VMR-15/LVMR-30/LVMR-45/LVMR-70/LVMR-90/L

Description

Hot Stick - 1 sectionHot Stick - 2 sections (base + top)Hot Stick - 3 sections (base + intermediary + top)Hot Stick - 4 sections (base + 2 intermediary + top)Hot Stick - 5 sections (base + 3 intermediary + top)

Overalllength(mm)1.2502.7003.9505.2006.450

Max.Voltage

(kV)20

150300400500

Approx.Weight

(kg)0,801,702,503,304,20

Offering considerable economic and operational advantages

Diameter of base and intermediary section is 32mm , top section is 25mm

Brass fitting pin Stainless steel protection ring

RITZGLAS Fiberglass-epoxy tube,filled with polyurethanefoam.

The RITZGLAS poles are submitted to 100 kV electrical tests in each 300mm, assuring an ideal insulation. Tests are made according to NBR 6936, ASTM F 711, IEC 855.

Diameter of base and intermediary section is 38mm , top section is 32mm

NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.


15

SECTIONAL HOT STICK

C403-0294

RITZGLAS GRIP-ALL CLAMPSTICK is the most used HOT LINE TOOL and makes part of any toolset of electrical live line maintenance. The position of the hook is operated through a voidfree pulltruded fiberglass rod, allowing three different basic positions:

Position to hook t h e g r o u n d i n g clamp eye or some other part to be handled.

In this position the hook closes the grounding clamp eye, allowing it to b e s w i v e l l e d , including in angles.

When drawn back into the head, the hook keeps the grounding clamp completely locked to the grip-all stick, which is ideal for its instal lat ion and removal.

OPEN CLOSED DRAWN BACK

C403-0298DRAWN BACK

For universalhead onhandle end ofany Single -Piece or HingedGrip-All, addsuffix A toCatalog No.

Universal Adapter

M1867

Grip-All ClampstickAssist Ring

CS-U Universal head onhandle end

E403-2543

HINGED STYLE



16

GRIP-ALL CLAMPSTICKS (Shotgun)

STANDARD MODEL

LIGHT MODEL (EXCLUSIVITY OF RITZ)offering considerable economic and operational advantages

HINGED MODEL

ACCESSORIES

RITZGLAS GRIP-ALL CLAMPSTICK is manufactured in three versions:STANDARD - using a 32mm pole.LIGHT - using a 25mm pole (exclusivity of RITZ).HINGED - using a 32mm pole.

Catalog N (mm) Overall Length (mm)

C403-0291 32 1.3501.97032C403-02922.58032C403-02933.19032C403-02943.80032C403-0295

Model

StandardStandardStandardStandardStandard

Max. Voltage (kV) Approx. Weight(kg)15 2,70

3,00353,401383,702304,10345

Catalog N

Catalog N

(mm)Model Max. Voltage (kV)

1.350 15 1,902,20351.9702,501382.5802,802303.190

2525252525 3,103453.800

C403-0291/LC403-0292/LC403-0293/LC403-0294/LC403-0295/L

LightLightLightLightLight

The Grip-All Stick bags are the ones with an S before the reference of each model.

(mm) Dimensions (mm)Extended

Approx. Weight(kg)

C403-0296 323232323232

1.015 2.005 3,604,104,504,705,005,20

2.5903.2003.8104.4205.030

1.32016251.9302.2352.540

C403-0297C403-0298C403-0299C403-0342C403-0343

Folded

Grip-All Extension - C403-0377

CatalogN Description

C403-0377C403-0378E403-2543M1867

32mm x 1.800mm Grip-All Extension32mm x 1.200mm Grip-All Extension

Grip-All Assist RingUniversal Adapter

Approx.Weight

(kg)

2,002,600,680,10



17

GRIP-ALL CLAMPSTICKS (Shotgun)

Overall Length (mm) Approx. Weight(kg)


18

HEADSGrounding clamp heads

Heads for switch operation

There are three types of heads for grounding clamps, all of them are universal and made with aluminum alloy adaptable to the RITZGLAS hot sticks which have CS-U head.

ME-U

Clamp locking system by a semi-sphere with adjustable pressure.

Approximate weight: 0,20 kg.

VMR-0198

It has a steel shaft, which is inserted into the screw eye and allows a perfect fixing by spring action.Approximate weight: 0,30 kg.

M4455-29B

Clamp locking and unlocking is made through a twisting movement.Allows articulating the grounding clamp, making it easier to work with it in angles.Approximate weight: 0,30 kg.

CP-13/U

Bronze head, with shaft for circuit breaker switch operation and cutout-switches operation.

Approximate weight: 0,25 kg.

Metallic case

Water-proof Bags

For cables and grounding equipment conditioning.

Due to the water-proof bags low weight, they are very practical and safe for grounding equipment transportation. These bags are available in the following basic models:

a) Grounding Equipment Bags:Made with high resistance water-proof canvas, these bags have inner divisions for a perfect conditioning of the grounding and temporary short circuit equipment.

b) Hot Stick Bags:Made with reinforced canvas with inner divisions,suitable for hot sticks and grounding rods conditioning and transportation.

c) Case-like Bags:Made with reinforced canvas, with fiberglass bottom, suitable for cables and hardware conditioning.

CATALOGN

EMT-01 180 X 205 X 500 2,432,87180 X 205 X 650EMT-01A

DIMENSIONS(mm)

APPROX. WEIGHT(kg)


19

CONDITIONING

CATALOGNo. DESCRIPTION

APPROX.WEIGHT

(kg)SE/ST-01/B Canvas bag for grounding equipment model CAR/ST-01/B

Canvas bag for grounding equipment model CAR/ST-02Canvas bag for grounding equipment model CAR/ST-03Canvas bag for grounding equipment model CAR/ST-05Canvas bag for grounding equipment model CAR/ST-05/TLCanvas bag for grounding equipment model CAR/ST-05/TL-18Canvas bag for grounding equipment model CAR/ST-06Canvas bag for grounding equipment model CAR/LT-03Canvas bag for grounding equipment model CAR/LT-04Canvas bag for grounding equipment model CAR/SE-01Canvas bag for VMR-45 and grounding rod conditioningCase-like bag, with fiberglass bottomCanvas bag, with divisions for cables and grounding equipmenthardware, without hot stick and grounding rodCanvas bag for Low Voltage grounding equipment, 05 gripsCanvas bag for Low Voltage grounding equipment, 04 grips

SE/ST-02SE/ST-03SE/ST-05

1,951,952,302,302,302,302,102,652,652,300,504,00

0,70

0,480,47

SE/ST-05/TLSE/ST-05TL-18

SE/ST-06SE/LT-3SE/LT-4

SE/SE-01SLD-45/TSLM-01

SE/BA-01

SE/SC-10/5SE/SC-10/4


20

AC VOLTAGE DETECTORSSuper Tester

Multi-uso tester (110 V through 15 kV) - Detectavolt (1 kV through 15 kV)

Contact tester2 models: STANDARD (with on/off-switch) and STAND BY (without on/off-switch)

SUPER TESTER is a monopolar, portable, strong and versatile non-contact voltage detector. Its modern electronic circuits provide quick and safe indications by sound and intermittent luminous warnings.

A built-in test circuit is available, which checks the instrument in all its working modes.

Monopolar portable non-contact voltage detector, for detecting voltage in AC electric installations. Available in 2 models, to be used with bare conductors, such as distribution lines, substations, cubicles, etc.

CONTACT TESTER is a monopolar contact voltage detector for AC-systems. The updated electronic circuit grants a safe and immediate indication by intermittent sound and flash light. The perfect function of the tester can be checked by pressing a TEST-Button which activates an internal test-circuit.

Note: Other voltage ranges can be provided under request.

DESCRIPTION Monopolar high voltage detector SUPER TESTER

CATALOG No.H-1990/ST-138 for 1kV through 138kV ACH-1990/ST-800 for 1kV through 800kV AC180 mm x 100 mm x 90 mm- Luminous - with 4 front LEDS- Sound - with electro-acustic speaker

9V alkaline battery - 15 hours durability undercontinuous work

Built-in with front buttom conditioning

50 / 60 Hz

DIMENSIONS

WARNING SIGNALS

BATTERY

WORKINGFREQUENCY

75A maximum, when emitting signalsDEMANDWORKING

TESTTester: 440g Case: 360gAPPROX. WEIGHTPlastic CaseCONDITIONING

TECHNICAL CHARACTERISTICS

TECHNICAL CHARACTERISTICSCATALOG No. DMU-15 DTV-15

110 V - 15 k V (AC) 1 kV - 15 kV (AC)One 9V alkaline battery

By contact or inductionBoth: Sound and luminous

110 mm x 70 mm x 28 mm

Canvas case160 grams

WORKING RANGEBATTERY

WORKINGSIGNAL

DIMENSIONS

CONDITIONINGAPPROX. WEIGHT

DESCRIPTION Monopolar contact voltage detector for AC-systems.

CATALOG No.

CT-01-20 (1 - 20 kV)CT-05-35 (5 - 35 kV)CT-20-70 (20 - 70 kV)

230 mm x 100 mm x 90 mm- Luminous - with 4 front LEDS- Sound - with electro-acustic speaker

9V alkaline battery - 15 hours durability undercontinuous work

Built-in with front buttom conditioning

50 / 60 Hz

DIMENSIONS

WARNING SIGNALS

BATTERY

WORKINGRANGE

324 mWDEMANDWORKING

TEST0,590 kg (with case)APPROX. WEIGHTPlastic caseCONDITIONING


MODELS NORMAL STAND BYCT-03-36/SB (3 - 36 kV)CT-20-70/SB (20 - 70 kV)CT-70-140/SB (70 - 140 kV)CT-130-230/SB (130 - 230 kV)


21

GROUNDING AND TEMPORARY SHORT-CIRCUITING STICKFOR SECONDARY SYSTEMS (LV)

Temporary short-circuiting stickfor three fase secondary systemsApplications

Characteristics

It is very simple and practical, allowing simultaneous connection of all three phase conductors to the earth conductor, causing a short circuit with a single move.

The fixing grips are connected to the conductor by pressure springs, providing a fast installation, without damaging the conductors.

The grips linking bar has a screw in its end, making it possible to connect a conductor to the ground.

The temporary short-circuiting stick for secondary systems is used in overhead low voltage lines which are not energized, providing safety during dead line maintenance against electrical accidents, which may be caused by an accidental switch of the system, lightning strikes, etc.

25,4mm diameter RITZGLAS stick, with dropping device and sliding proof handle.

Aluminum alloy Grips and linking bar.

Special steel springs.

CATALOG NOVERALL LENGTHNUMBER OF GRIPSMAX. CONNECTIONMIN. CONNECTIONWEIGHT

CAR/SC-011.200 mm

04298,1 mm9,81 mm1,10 kg

CAR/SC-01-51.400 mm

05298,1 mm9,81 mm1,50 kg


345m

m18

5mm

200m

m20

0mm

200m

m45

mm

25m

m

1200

mm

Model: CAR/SC-10/4EquipmentITEM 01 - 04 un - Ref.: HG-1710-F30

Grounding clamp fixed to a 25/300mm RITZGLAS stick, with sliding proof grip (120mm).

ITEM 02 - 1,20m - Ref.: CTC-16Ultra-flexible 16mm copper cable, with crystal clear insulation.

ITEM 03 - 01 un - Ref.: SE/SC-10/4Canvas bag with inner divisions for equipment conditioning.


22

GROUNDING AND TEMPORARY SHORT-CIRCUITINGEQUIPMENT FOR SECONDARY SYSTEMS (LV)

Model: CAR/SC-10/5EquipmentITEM 01 - 05 un - Ref.: HG-1710-F30

Grounding clamp fixed to a 25/300mm RITZGLAS stick, with sliding proof grip (120mm).

ITEM 02 - 1,60m - Ref.: CTC-16Ultra-flexible 16mm copper cable, with crystal clear insulation.

ITEM 03 - 01 un - Ref.: SE/SC-10/5Canvas bag with inner divisions for equipment conditioning.


23

OVERHEAD DISTRIBUTION GROUNDING SET WITHPRESSURE-TYPE TERMINALS

Model: T600-0641/BThis complete set of ground clamps, cable and accessories supplies all the equipment needed for many types of distribution structures in one easy-to-use kit. The jumper terminals are factory crimped to the grounding cable.

This kit was designed for use on of structures of 7,2 up to 69 kV.

This table below lists the various components completely assembly in the Distribution Grounding Set.

Equipment:Item 01 - 10 un - Ref.: C600-0065

Serrated jaw, C Clamp, for Plain Plug terminals.

Item 02 - 01 un - Ref.: C600-0152Ground Cluster Support.

Item 03 - 18 m - Ref.: CTC-2525mm Copper Ground Cable, 3 Cables 1,8m long, 1 Cable 3,6m long and 1 Cable 9,0m long.

Item 04 - 10 un - Ref.: C600-261825mm Plain Plug Ferrules.

Item 05 - 03 un - Ref.: G3626Clamp Support Stud.

Item 06 - 01 un - Ref.: GT3370Screw Ground Rod.

11

1

1

1

1

1

11

1

2

33

3

3

3

6

GROUNDING AND TEMPORARY SHORT-CIRCUITING FORTRANSFORMER JUMPER - Class 15kV

Model: CAR/JT-01

ITEM 01 - 03 un - Ref.: HG1710-600FBronze grounding clamp, fixed to a 600mm fiberglass pole with sliding proof handle, 2 clamps with double connector and 1 clamp with single connector.

ITEM 02 - 3,60m - Ref.: CTC-16 Ultra-flexible 16mm copper cable, with crystal clear insulation, 2 cables 0,80m long and 1 cable 2,00m long.

ITEM 03 - 01 un - Ref.: G1710-TGrounding clamp with T type fastening screw.

ITEM 04 - 01 un - Ref.: EMT-01AMetallic case for equipment conditioning.

Equipment

12

1

2

13 2


24


25

GROUDING AND TEMPORARY SHORT-CIRCUITING - CEMIG STANDARD

2

PHASE

PHASE

PHASE

0,5 m

0,5 m

NEUTRAL

SECONDARY EQUIPMENT

1 - PRIMARY EQUIPMENTQUANT. UN. CAT. N DESCRIPTION

04 un G 3403/B Aluminum alloy grounding clamp with eye screw.

Clamp support.

25mm extra flexible copper cable with crystal clearinsulation, 2 cables 2,5meters long and 1 cable 5,0meter long.

G 3625

CTC-25

CJ

m

01

10

CONDITIONING (OPTIONAL)QUANT. UN. REF. DESCRIPTION

01 un SL/M-01 Case-like canvas bag with fiberglass bottom, 250 x 650mm.

HOT STICK FOR EQUIPMENTINSTALLATION

QUANT. UN. CAT. N DESCRIPTION

01

01

01

un

un

un

VMR-45/L

VMR-0198

SLD-45/LB

Sectional RITZGLAS hot stick, 3.950mm length,including:

* 01 un - VMR/L-S -End element, 25 / 1.250mm, with CS/U head.* 01 un - VMR/L-I - Intermediary element, 32 / 1.250mm.* 01 un - VMR/L-P - Base element, 32 / 1.250mm.

Aluminum alloy head for grounding clamp.

Canvas bag with inner divisions for 3 elements stickand additional bag for heads.

3 - SADDLE EQUIPMENTQUANT. UN. CAT. N DESCRIPTION

02

01

un

un

G 3403/B

GT-3370-PS

Aluminum alloy grounding clamp with eye screw.

Carbon steel hexagonal grounding rod, 1.200 mm totallength.

Saddle cluster.

25mm extra flexible copper cable with crystal-clearinsulation, 1 cable 7 meters long and 1 cable 8,0meters long.

DST/6

CTC - 25

un

m

01

15

2 - SECONDARY EQUIPMENTQUANT. UN. CAT. N DESCRIPTION

04 un G 3403/B Aluminum alloy grounding clamp with eye screw.

25mm extra flexible copper cable with crystal-clearinsulation, 3 cables 0,5 meters long.CTC - 25m1,5

1

PHASE PHASE PHASE

2,5 m 5,0 m

PRIMARY EQUIPMENT

3

NEUTRAL

SADDLE

GROUNDING ROD

SADDLE EQUIPMENT

7,0 m

8,0 m

NEUTRAL

0,5 m


26

LIGHT GROUNDING AND TEMPORARY SHORT-CIRCUITINGFOR DISTRIBUTION SYSTEMS UP TO 34,5 kV

4

7

8

7

44

5

6

9

Model: CAR/ST-01/LEquipmentITEM 01 - 01 un - Ref.: VMR-45/L - RITZGLAS

sectional stick, 3.950mm overall length, including:

01 un - Ref.: VMR/L-S - End element 25/1.250mm with CS-U universal head.

01 un - Ref.: VMR/L-I - Intermediary element, 32/1.250mm.

01 un - Ref.: VMR/L-P - Base element, 32/1.450mm.

ITEM 02 - 01un - Ref.: CP-13/U - Head for switch operation.

ITEM 03 - 01 un - Ref.: VMR-0198 - Head for grounding clamp.

ITEM 04 - 03 un - Ref.: G1710 - Twisting grounding clamp, with eye screw.

ITEM 05 - 01 un - Ref.: DST-4 - Suspension cluster for simultaneous lifting of all grounding clamps.

ITEM 06 - 01 un - Ref. : G1710-T - Twist ing grounding clamp with T screw.

ITEM 07 - 04 m - Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, 2 cables 2 meters long.

ITEM 08 - 12 m - Ref.: CTC-16 - Extra flexible 16 mm copper cable, with crystal clear insulation.

ITEM 09 - 01 un - Ref.: GT3370-PS - Grounding rod, 19mm, hexagonal section, hot galvanized, 1.200mm length.

ITEM 10 - 01 un - Ref.: SE/BA-01 - Canvas bag for equipment conditioning (except items 01 and 09).

ITEM 11 - 01un - Ref.: SLD-45/T - Canvas bag for hot stick and grounding rod conditioning.


27

STANDARD GROUNDING AND TEMPORARY SHORT CIRCUITFOR DISTRIBUTION SYSTEMS UP TO 34.5 kV.

4

7

7

7

44

5

68

Model: CAR/ST-01/B

EquipmentITEM 01 - 01 un - Ref.: VMR-45 - RITZGLAS

sectionable stick, 3.950mm total length, including:

01 un - Ref.: VMR-S - End element 3 2 / 1 . 2 5 0 m m , w i t h C S - U universal head.

01 un - Ref.: VMR-I - Intermediary element, 38 / 1.250mm.

01 un - Ref.: VMR-P - Base element, 38 / 1.450mm.



ITEM 04 - 03 un - Ref.: G3403-B - Twist ing grounding clamp, with eye screw.

ITEM 05 - 01 un - Ref.: DST-3 - Suspension cluster for simultaneous grounding clamp raising.

ITEM 06 - 01 un - Ref.: G3403-BT - Twisting grounding clamp with T screw.

ITEM 07 - 16 m - Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, two 2 meters pieces and one 12 meter piece.

ITEM 08 - 01 un - Ref.: GT3370-10 - Copper steel grounding rod, 17mm diameter, 1.000mm length, with threaded brass end.

ITEM 09 - 01 un - Ref.: SE/ST-01 - Canvas bag for equipment conditioning.


28

STANDARD GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR DISTRIBUTION SYSTEMS UP TO 22 kV

Model: CAR/ST-02

EquipmentITEM 01 - 03 un - Ref.: HG 1710 - F - Twisting

grounding clamp, fixed to a 25mm RITZGLAS sectional stick, 1.200mm overall length.

ITEM 02 - 01 un - Ref.: DST-4 - Suspension cluster for simultaneously lifting all grounding clamps up to the line to be grounded.

ITEM 03 - 01 un - Ref.: GT3370 - Copper steel grounding rod, with brass thread a n d d e t a c h a b l e h a n d l e , 1.500mm length.

ITEM 04 - 01 un - Ref.: G3363-1 - Fixing clamp, to be connected to grounding rod.

ITEM 05 - 16 m - Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, 2 cables 2 meters long to connect the clamps to the cluster (ground center) and 1 cable 12 meters long to connect the cluster to the grounding rod.

ITEM 06 - 01 un - Ref.: SE/ST-02 - Canvas case for equipment conditioning and transportation.

1

5

5

5

1

2

1

4

3


29

STANDARD GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR DISTRIBUTION SYSTEMS UP TO 34,5 kV

4

88

44

5

7

9

8

77

6

Model: CAR/ST-03



01 un - Ref.: VMR-S - End element 32/1.250mm, with CS-U universal head.

01 un - Ref.: VMR-I - Intermediary element, 38x 1.250mm.

01 un - Ref.: VMR-P - Base element 38 x1.450mm.



ITEM 04 - 03 un - Ref.: G3403-B - Twisting grounding clamp, with eye screw.

ITEM 05 - 01 un - Ref.: DST-3 - Suspension cluster for simultaneous lifiting of all grounding clamps.

ITEM 06 - 01 un - Ref.: DST-5V - Saddle cluster, for intermediary ground point.


ITEM 08 - 17 m - Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, 2 cables 2 meters long , 1 cable 3 meters long and 1 cable 10 meters long.

ITEM 09 - 01 un - Ref.: GT3370 - Copper steel grounding rod, 17mm diameter, 1.500mm length, with threaded brass end.

ITEM 10 - 01 un - Ref.: SLD-45/T - Canvas bag with inner divisions for hot stick and grounding rod conditioning.

ITEM 11 - 01 un - Ref.: SLM-01 - Case-like canvas bag, with fiberglass bottom, for cables and hardware conditioning.

8


30


Model: CAR/ST-04

EquipmentITEM 01 - 01 un - Ref.: VMR-45/L - RITZGLAS


01 un - Ref.: VMR/L-S - End element 25 / 1.250mm, with CS-U universal head.

01 un - Ref.: VMR/L-I - Intermediary element, 32 / 1.250mm.

01 un - Ref.: VMR/L-P - Base element, 32 / 1.250mm.


ITEM 03 - 03 un - Ref.: GAR-2 - Pressure grounding clamp, quick contact by spring- connection.

ITEM 04 - 01 un - Ref.: DST-1/U - Suspension cluster, for installation and removal of the grounding clamps.

ITEM 05 - 01 un - Ref.: CF-1 - Metallic reel, with brass clamps for connection to the grounding rod and conditioning of ground cable.

ITEM 06 - 01 un - Ref.: GT3370-10-T - Copper steel grounding rod, 17mm diameter, 1.000mm length, with threaded brass end.

ITEM 07 - 16 m - Ref.: CTC-16 - Extra flexible 16mm copper cable, with crystal clear insulation, 2 cables 2 meters long and 1 cable 12 meters long.

ITEM 08 - 06 un - Ref.: TC-16 - Terminal for 16mm extra flexible copper cable.

ITEM 09 - 01 un - Ref.: EMT-01 - Metallic case for conditioning and transportation of cables and hardwares with handle and lock, orange color.

ITEM 10 - 01 un - Ref.: SLD-45/m - Canvas bag with inner divisions for hot stick and grounding rod conditioning.

3

7

7

7

33

6

5


31


1

5

1

2

1

4

6

Model: CAR/ST-05

EquipmentITEM 01 - 03 un - Ref.: HG3403/B-F - Twisting

grounding clamp, fixed to a 25mm RITZGLAS sectional stick, 1.250mm overall length.


ITEM 03 - 01 un - Ref.:DST-5V -Saddle cluster, for intermediary ground.

ITEM 04 - 03 un - Ref.: G3403/B-T - Clamp for contact with ground.

ITEM 05 - 17 m - Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, 2 cables 2 meters long, 1 cable 3 meters long and 1 cable 10 meters long.



5 5

5

3

44


32

GROUNDING AND TEMPORARY SHORT-CIRCUITING WITHTELESCOPIC STICK FOR DISTRIBUTION SYSTEMS UP TO34,5 kV

1

1

5

5

1

3

5

2

4

Model: CAR/ST-05TL/18

EquipmentITEM 01 - 03 un - Ref.: HG3403-BTL/18 - Twisting

grounding clamp, fixed to a 25mm telescopic RITZGLAS stick, with sliding proof handle and 1.800mm length when extended.

ITEM 02 - 01 un -Ref.: G3403-BT - Twisting grounding clamp with T screw.


ITEM 04 - 01 un - Ref.: GT3370/PS - 19mm hexagonal section grounding rod , ho t ga lvan ized and 1.200mm overall length.

ITEM 05 - 16 m - Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, 2 cables 2 meters long and 1 cable 12 meters long.

ITEM 06 - 01 un - Ref.: SE/ST-05TL - Canvas bag for equipment conditioning.

Note: For connection with neutral, add Ref.: G3403-BT to item 02.


33

GROUNDING AND TEMPORARY SHORT-CIRCUITING WITHSECTIONAL STICK FOR DISTRIBUTION SYSTEMS UP TO34,5 kV

3

3 37

7

7

5

4

6

Model: CAR/ST-06

EquipmentITEM 01 - 01 un - Ref.: VMR-70/L - RITZGLAS


01 un - Ref.: VMR/L-S - End element 25 / 1.250mm, with CS-U universal head.

02 un - Ref.: VMR/L-I - Intermediary element, 32 / 1.250mm.

01 un - Ref.: VMR/L-P - Base element, 32/1.450mm.

ITEM 02 - 01un - Ref.: CP13/U - Head for switch operation.

ITEM 03 - 03 un - Ref.: HG3403-BV - Twisting grounding clamp, fixed to a 25 / 1.250mm end element, with device for attachment of an extension to it.



ITEM 06 - 01 un - Ref.: GT3370/PS - 19mm hexagonal section grounding rod , ho t ga lvan ized and 1.200mm total length.

ITEM 07 - 16 m - Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, 2 cable 2 meters long and 1 cable 12 meters long.


Nota: For connection with neutral, add Ref.: G-3403-BT to item 04.


34

GROUNDING AND TEMPORARY SHORT-CIRCUITING FORTRANSMISSION LINES UP TO 500 kV TOWERS

Model: CAR/LT-03EquipmentITEM 01 - 01 un - Ref.: VMR-70 - RITZGLAS sectional stick, 5.200mm overall length, including:

01 un - Ref.: VMR-S - End element 32 / 1.250mm, with CS-U universal head.


01 un - Ref.: VMR-P - Base element, 38x1.450mm.

ITEM 02 - 01 un - Ref.: VMR-0198 - Head for grounding clamp operation.

ITEM 03 - 04 un - Ref.: C600-0965 - Twisting grounding clamp, with serrated jaw and eye screw.

ITEM 04 - 04 un - Ref.: C600-1617 - Twisting grounding clamp with T screw.

ITEM 05 - 32 m - Ref.: CTC-95 - Extra flexible 95mm copper cable, with crystal clear insulation, 4 cables 8 meters long.

ITEM 06 - 01 un - Ref.: SE/LT-03 - Canvas bag for equipment conditioning.

Note: A smaller grounding cable can be ordered, depending on the short circuit current of the system.

3

3

3

3

55

5

4 44

4


35

GROUNDING AND TEMPORARY SHORT-CIRCUITING WITHSECTIONAL STICK FOR TRANSMISSION LINES UP TO 138kVWOODEN, CONCRETE OR METALLIC STRUCTURES

Model: CAR/LT-04





01 un - Ref.: VMR-P - Base element, 38 / 1.450mm.

ITEM 02 - 01 un - Ref.: VMR-0198 - Head for grounding clamp operation.

ITEM 03 - 04 un - Ref.: G3622-1 - Twisting grounding clamp with eye screw.

ITEM 04 - 03 un - Ref.: G3622-1/S - Twisting grounding clamp with support and eye screw.

ITEM 05 - 03 un - Ref.: G3363-1 - Twisting grounding clamp with T screw.

ITEM 06 - 31 m - Ref.: CTC-95 - Extra flexible 95mm copper cable with crystal clear insulation, 4 cables 4 meters long and 1 cable 15 meters long.

ITEM 07 - 01 un - Ref.: DST-5V - Saddle cluster, for intermediary ground point.


ITEM 09 - 01 un - Ref.: SE/LT-04 - Canvas bag for equipment conditioning.

Note: A smaller grounding cable can be ordered, depending on the short circuit current of the system.

3

3

4

3

44

36

6

6

6

6

55

7

5

8

Model: CAR/SE for substation up to 138 kV.

4

6

5

Note: Single phase representation

Equipment

ITEM 01 - 01 un - Ref.: VMR-90 - RITZGLAS sectional stick, 6.450mm overall length, including:



01 un - Ref.: VMR-P - Base element, 38 / 1.450mm

ITEM 02 - 01 un - Ref.: CP13/U - Head for switch operation.

ITEM 03 - 01 un - Ref.: ME/U - Intermediary head for grounding clamp installation.

ITEM 04 - 03 un - Ref.: G3368 - Bus bar grounding clamp.

ITEM 05 - 03 un - Ref.: G3363-1 - Clamp for contact with ground.

ITEM 06 - 03 un -Ref.: CTC-25 - Extra flexible 25mm copper cable, with crystal clear insulation, 10 meters length.

ITEM 07 - 01un - Ref.: SE/SE - Canvas bag

NOTE: The components of the set above support a specific substation pattern and there are cases which the cable length and/or diameter must be changed, as well as the grounding clamps, depending on the heights of the structures, short circuit currents or the diameter/width of the bus bars.

To define the proper cables and clamps, refer to other sections of the present catalog.

GROUNDING AND TEMPORARY SHORT-CIRCUITING FORSUBSTATIONS


36


37

GROUNDING AND TEMPORARY SHORT-CIRCUITING FORCUBICLES - 15 kV CLASS.

INSTALLATION POSITION DETAILS

Two models, that provide a perfect connection, either in rectangular or circular section bus bar.

For rectangular section bus bar, please see pictures 02 and 04, in order to choose the correct clamp.

LIGHTPRACTICAL

SAFE

TWISTING BRONZE CLAMP

FIBERGLASS POLE

SLIDING PROOF HANDLE

FIG. 01 FIG. 02 FIG. 03 FIG. 04

Clamp Cat. N: HT600-0465F Clamp Cat. N: HG1710-600F


38

GROUNDING AND TEMPORARY SHORT-CIRCUITING FORCUBICLES - 15 kV CLASS

MODEL: CAR/CB-01

ITEM 01 - 03 un - Ref.: HT600-0465FBronze twisting grounding clamp, fixed to a fiberglass pole with sliding proof handle, 600 mm overall length.

ITEM 02 - 09 m - Ref.: CTC-25Extra flexible 25mm copper cable, with crystal clear insulation, 3 meters length.

ITEM 03 - 01 un - Ref.: G3363-1Bronze alloy twisting grounding clamp with T screw, for connection with ground.

MODEL: CAR/CB-02

ITEM 01 - 03 un - Ref.: HG1710-600FBronze twisting grounding clamp, fixed to a fiberglass pole with sliding proof handle, 600mm overall length.

ITEM 02 - 09 m - Ref.: CTC-25Extra flexible 25mm copper cable, with crystal clear insulation, 3 meters length.

ITEM 03 - 01 un - Ref.: G3363-1Bronze twisting grounding clamp with T screw, for connection with ground.


Maximum working voltage 15kVContinuous Current 200 AFault current 15 cycles 12.000 AFault circuit current 30 cycles 8.000 AMain line range - Max. 19 mmMain line range - Min. 4 mmRecommended torque 2 DaN/mApproximate weight - without case 6.850 kg

- with case 9.650 kg

CONDITIONING

Ref.: EMT-01AOrange metallic case, 175 x 295 x 650mm, with handle, two quick catches and padlock.

COMPLEMENTARY ITEM

Ref.: DMU-15 or DTV-15MULTI-USO TESTER voltage detector,110V through 15kV or DETECTAVOLT voltage detector, 1 kV through 15 kV.

IMPORTANT NOTE:Never install the Grounding and Temporary Short-Circuiting set without making sure there is no voltage in the working site.Use a Multi-Uso Tester or Detectavolt voltage detector.For further information, please refer to its specific catalog.

HT600-0465F HG1710-600F

G3363-1

EMT-01A

DMU-15

INTRODUCTION:

USE:

ADVANTAGES:

TECHNICAL CHARACTERISTICS:FLV-3584

FLV-3585

The new SOCKET BALL clamp was designed to solve many kinds of problems regarding temporary grounding, such as insufficient space or contact surface for installation.

Inside cubicles, specially the ones with rectangular bus bars, where the regular clamps are too big to be used, SOCKET-BALL clamps overcome installation difficulties with extreme operational easiness, providing a safe connection able to withstand high short circuit currents.

A brand new model, the SOCKET-BALL clamp is suitable for grounding of:

- Cubicles;- Indoor and outdoor substations;- Hot line vehicles;- Painted transmission lines structures, where it is not possible to get a perfect electric contact using regular grounding clamps.

- Reduced size and weight;- High currents withstand;- High mechanical strength;- Multiangular installation position.

Ref.:SOCKET-BALL temporary grounding clamp.

- Bronze;- Eye fastening screw;- M8 screw, nut and ring, for fixation of the terminal to the grounding

cable;- Installation torque: 3 DaN/M;- Max. Short circuit current: 30.000 A - 30 cycles 43.000 A - 15 cycles- Approximate weight: 0,40 kg.

Ref.:BALL PIN for temporary grounding point.

- Tinned steel screw;- M12 x 40mm thread, nut and bronze ring.- 26mm diameter tinned bronze alloy connection ball.- Installation torque: 3,5 DaN/M;- Approximate weight: 0,20 kg.

Note: There must be ordered enough ball pins to be installed in the bus bars, terminals and other parts of the electrical system, providing enough grounding points.

COMPLETE SET:For ordering a complete grounding equipment, including clamp, ball pin, cable, insulated stick, voltage detector, conditioning bag, a.s.o., Talk to our Sales Department in order to have each of these items correctly dimensioned, obtaining therefore, an equipment able to meet both the electric and mechanical requirements of your installation.

POSITIONS

TEMPORARYGROUNDING CLAMP

SOCKET BALL

FLV-3585BALL Pin


39

SOCKET BALL CLAMP FOR TEMPORARY GROUNDING

FLV-3584SOCKET-BALLClamp

MULTIANGULAR

POSITIONS


40

SEQUENCE OF TEMPORARY GROUNDING ANDSHORT-CIRCUITING SET INSTALLATION - OVERHEAD LINES

With Contact Tester high voltage detector attached to

a RITZGLAS hot stick, verifies that the system is de-energized..

Using a suspension cluster set and a RITZGLAS hot

stick, slowly lift the clamps and connect the set to the central phase.

Always using a RITZGLAS hot stick, as is usual in hot line maintenance, remove one clamp from the cluster set and connect it to the lateral phase.

Repeat the last step, connecting the third clamp to the other lateral phase, concluding the short circuit of the three phases.Note: The clamps must be attached directly to the conductor and never to preformed wire connections or similar.

After the installation of the grounding set is over, the eletrician is allowed to have access to the conductors, that is to say, the line can be assumed to be de-energized only when it is properly grounded..

Install the ground rod and attach the proper grounding clamp to its vertical shaft. The ground rod should be driven as deep as possible, leaving above the ground only the length needed to attach the grounding clamp.

Previously fixed to the pole, connect the saddle cluster support to the ground rod t h r o u g h t h e p r o p e r grounding clamps and cable.

Detail of saddle cluster support, which will also be c o n n e c t e d t o p h a s e conductors through proper grounding clamps and cables.

Successor of RITZ-CHANCE

Rod. BR 381 - Km 430 - CP.: 54 - CEP.: 32530-000 - Betim - MGFone: (+55 31) 3539.7000 - Fax: (+55 31) 3539.7100

e-mail: [email protected] page: www.ritzbrasil.com.br

We are leaders in HOT LINE SUBSTATION MAINTENANCE and HOT LINE TOOLS for Distribution and Transmission Systems up to 800 kV.

(A. B. CHANCE - Technology ) Visit our WEBSITE or ask for specific documentation .www.ritzbrasil.com.br

catálogo general ritz puesta a tierra transitoria

Documents

standard grounding

light grounding

cluster grounding clamps

history of ritz

kv class

successor of ritz

kv towers

distribution systemsup