catalogo de fornecedores internacional 2013

2013

Capa_Catalogo_South-America-MArket 2013.indd 1 3/6/13 3:04 PM

Untitled-1 1 3/6/13 3:40 PM

Inde

x IntroductionInternational Suppliers Guide for the South American Market - Composites, Polyurethane and Engineered Plastics shows companies which operate in the South American market. This International Guide is to be used by professionals, all over the world, who want to make business in South America and are looking for a suitable partner.In the next pages, you will fi nd complete descriptions of several companies and their products and services.More information can be found at www.tecnologiademateriais.com.br or [email protected]

Simone Martins SouzaExecutive DirectorIn

dex

Executive Director Simone Martins Souza (Mtb 027303)Journalist (technical editor)Rodrigo Contrera (editor técnico)Marketing & EventsTamara LeiteSales RepresentativesRosely PinhoTabatha Magalhães

www.artsim.com.br

AdministrationDanilo Oliveira SilvaCirculationCristiane Shirley GuimarãesInternetAndré Tavares de OliveiraDesktop publishingMarcelo Marcondes MarinPrintingArtSim Proj. Gráfi cos Ltda.

South American Market - Composites & Polyurethane Companies 2013Editora do Administrador Ltda. All rights reserved.

Editora do Administrador Ltda.Rua José Gonçalves, 9605727-250 São Paulo – SPPhone: 55 - 11 2899-6373e-mail: [email protected]

Press & Trade ShowsComposites & Engineered Plastics Magazine ............................................... 23/27Polyurethane Magazine .......................... 24/27Industrial Seminar ....................................... 02Online Composites, Epoxy, Polyurethane and Engineered Plastics Catalogue .............. 18South American Congress on Composites, Polyurethane and Engineered Plastics ..... 25/26International Composites, Polyurethane and Engineered Plastics Conference ............ 28FEIPLAR COMPOSITES & FEIPUR 2014 ......... 28

DistributorsAbcol .......................................................... 20Colormix ..................................................... 12Mastergel ................................................... 09Novapol ...................................................... 04Transtécnica ................................................ 10VI Fiberglass ................................................ 11

Equipment manufacturerFiberpu ....................................................... 08Korthfi ber ................................................... 22Transtécnica ................................................ 10

ProcessorsBlitz ............................................................ 21

Raw Material ManufacturersAirplast ....................................................... 17Asta Química .............................................. 16Ecomax ....................................................... 05

Evonik .................................................... 14/15Jushi ........................................................... 13Novapol ...................................................... 04Polystell ...................................................... 19Reichhold .................................................... 06Texiglass ...................................................... 07

ProductsAdditives .............................. 9/11/14/15/19/20Adhesives ..................................... 4/5/9/11/20Assemble roving ......................................... 13ATH .............................................................. 4Calcium carbonate .............................. 9/11/20Carbon fi ber tapes ........................................ 7Chopped strand mat ................... 4/9/11/13/20Chopped strands ........................ 4/9/11/13/20Coil tensioner ............................................. 22Composites equipment ....................... 9/10/20Copolymer for fl exible foams ...................... 17Core materials .................................... 9/11/20Covering & molded process ........................ 21Direct roving ............................................... 13Epoxy resins ..................................... 4/9/11/20Fabrics .......................................... 4/7/9/11/20Fiberglass screens .......................................... 7Fiberglass tapes ............................................. 7Fiberglass yarns ............................................. 7Fiberglass ................................. 4/7/9/11/13/20Filament winding machine .......................... 22Fillers ............................................... 4/9/11/20Flexible foam injection (polyurethane) ......... 21Gelcoats ....................................... 4/6/9/11/20Glass Wool Insulation Production ................ 21HF Welding process .................................... 21IMC ............................................................ 16

Integral skin foam injection (polyurethane) ............................................ 21Low pressure injection machine................ 8/10Mats ................................................ 4/9/11/20Metton (DCPD) .......................................... 21Micronized PET ........................................... 17Molds ................................................... 6/9/20Multiaxial fabrics ...................... 4/7/9/11/13/20Non-reactive paste ........................................ 9Peroxides ......................................... 4/9/11/20PET based TPU ............................................ 17Pigments ................................ 4/9/11/12/16/20Polyester polyol ........................................... 17Polyester resins ............................. 4/6/9/11/20Polyurethane injection equipment ....... 8/10/20Reinforcements ........................... 4/9/11/13/20Release agents ................................. 4/9/11/20Replacement parts ........................................ 8Rigid foam injection (polyurethane) ............. 21Rigid foam production (polyurethane) ......... 21RIM/RRIM .................................................... 21Roving ........................................ 4/9/11/13/20Semi-rigid foam injection (polyurethane) ..... 21Special polyurethane foam ............................ 5Stitch-bonded combo mat .......................... 13Styrene monomer ............................ 4/9/11/20Surface treatment and painting ................... 21Titanium dioxide ...................................... 9/20Tools and devices development ........ 4/9/11/21Urethane-methacrylate resins ........................ 4Vegetal oil-based polyurethane polyol ........... 5Vegetal oil-based polyurethane products ....... 5Vinylster resin ............................... 4/6/9/11/20Woven roving ............................. 4/9/11/13/20

CompaniesAbcol ...........................................20Airplast ........................................17Asta Química ...............................16Blitz .............................................21Colormix ......................................12Ecomax ........................................05

Evonik .....................................14/15Fiberpu ........................................08Jushi ............................................13Korthfi ber ....................................22Mastergel ....................................09Novapol .........................................4

Polystell .......................................19Reichhold .....................................06Texiglass .......................................07Transtécnica .................................10VI Fiberglass .................................11

3

Indice Cat int 2013.indd 1 3/8/13 3:54 PM

Avenida Talma Rodrigues Ribeiro S/N, lado impar, Lote 02, Quadra XV - Serra, ES 29168-089 - Brazil - +55 (27) 3298-1100

www.novapol.com.br

C O M P O S I T E M A T E R I A L S • A N I N N O V A T I V E C O M P A N Y

PORTFOLIO APPLICATIONSResins/Gel Coats/Adhesives

PARTNERSNovapol distributes products from

leading worldwide manufacturers for the

composite industry, such as:

Axel Plastics (Mold releases)

Huber (ATH and fillers)

Owens Corning (Fiberglass)

Scott Bader (Structural Adhesives,

Urethane-Methacrylate resins)

Swancor (Vinylester and Epoxy resins)

United Initiators (Peroxides)

Others

NOVAPOL Composite Materials is one the most important manufacturers of resins for the composites market, and composite materials in Brazil and Latin America.

NOVAPOL Composite Materials belongs to IMSA Group, which, through its subsidiaries in its Chemical Business Unit, manufactures resins and materials in facilities in Colombia, Brazil, Mexico, Ecuador and Venezuela, with sales activities in 11 countries.

Through its own technology developments and an active technical license agreement from Scott Bader in the UK, NOVAPOL Composite Materials boasts a wide portfolio of products serving different market segments in the composites industry.

NOVAPOL Composite Materials has incorporated the know-how in manufacturing parts in LPSMC (Sheet Molding Compound and Low Pressure Sheet Molding Compound), changing completely the competitiveness parameters of the composites industry in the region.

We improve our customers’ habitat, providing sustainable and innovative solutions

Cat Int Novapol 2013_03.indd 1 3/8/13 3:59 PM

AddressRua Alcântara, 474 - Vila Maria - São Paulo - SP - Brazil

Phone: 55 11 2631-0178

Adhesive – It was developed to join several substrates: wood, glass, ceramics and metal, presenting excellent production adhesion, without the characteristic epoxy based adhesive odour. It is easy to handle and can cure with the hardener addition (usage rate of 100 : 30 parts in weight).

Vegetable oil-based products

www.ecomax.ind.br

ECOMAX is an innovative company which provides vegetal oil-based polyurethane products, respecting the environment, besides providing high quality level and excellent cost-effectiveness. Another company´s objective is to present adequate solutions to each customer necessity.

ECOMAX offers a broad product line to support several markets such as: Marine, Wind Energy, Thermal Insulation, Civil Building, Automotive, and many others. As Ecomax´s main business, the company manufactures polyols (vegetal oil-based), used directly in its own products or sold to companies which use it in their production line. The vegetable oil-based polyol was developed with proprietary technology. With high hydroxyl content, it is used in the rigid foam manufacturing. The product also presents large cross-linking degree, providing more dimensional stability to foams.

Special polyurethane foam, developed with proprietary technology for application in boats, wind blades and automotive markets, among others. Its main characteristic is the excellent compression hardness and large flexibility in curvatures, together with the high polyurethane performance.

It is a self-extinguishing product (it does not propagate flames) and offers extremely low water absorption ( 0,1% of the area). It is manufactured in several densities (45 kg/m³ till 400 kg/m³), according to the project necessity.

Cat Internacional 2013_Ecomax.indd 1 3/7/13 3:24 PM

Everywhere Performance Matters

With 20 manufacturing sites and 5 technology centers in 12 countries, Reichhold develops and supplies innovative and sustainable resins and gelcoats to support the growth of composites and coatings worldwide. With over 85 years of experience, Reichhold also has the global resources to provide focused solutions to the needs of our customers for a variety of markets and applications.

In Brazil, Reichhold has been the pioneer and leader in the manufacture of synthetic resins since its foundation in 1948. Reichhold employs over 350 people in two manufacturing plants located in Mogi das Cruzes-SP, Southeastern Brazil, and Simões Filho-BA, Northeastern Brazil, as well as one of the five global research centers in Mogi das Cruzes. The following South America countries are served by the Brazilian operations: Argentina, Bolivia, Brazil, Chile, Paraguay, Uruguay, and Venezuela.

Reichhold’s success is due to a strong belief in its core values of safety, ethics, customer support, and respect for the environment.

Resins: Polyester, Vinyl Ester, and PhenolicGelcoatsPigmented Pastes

www.reichhold.com • [email protected] • Phone: +55 11 4795-8136

Anuncio 1.indd 1 05/03/13 15:20

Since 1986, producing Fiberglass, Carbon Fiber, and Aramid (Kevlar®) fabrics.

TEXIGLASS is a market leader in Latin America, exporting products to all continents.

TEXIGLASS manufactures products for various industries such as composites (reinforced plastic), marine, aeronautics and aerospace, abrasives, civil construction, and many others.

TEXIGLASS is proud to sponsor universities and associations, and it cooperates with university programs, as well as the development of new technologies.

TEXIGLASS sponsors sports events by donating materials for manufacturing sports items which are made of Carbon Fiber, Fiberglass, etc.

TEXIGLASS’ own headquarters is located in modern industrial buildings on a land area of 22,000m², in the city of Vinhedo, state of São Paulo, 60 km away from the city of São Paulo, and is surrounded by modern highways and airports, having a privileged logistic situation.

TEXIGLASS is a very prestigious company in its field of activity. It enjoys an excellent financial situation and has established lines of credit with all its domestic and international suppliers.

[email protected]: +55 19 3515.5500Rua Angelo Bevilacqua, 1064, Distrito IndustrialVinhedo, CEP 13280-000 - São Paulo - Brazil

ProductsFabrics for the Building IndustryFabrics for Reinforced PlasticsFabrics for Thermal and Accoustic IsolationFiberglass ScreensFiberglass YarnsFiberglass TapesCarbon Fiber TapesCarbon Fiber Fabrics

Please do not hesitate in contacting us if you need further information.

Cat Int 2013 Texiglass.indd 1 3/5/13 11:02 AM

Fiberpu

Developing Equipment

Company´s Portfolio• Low pressure injection machine

• Replacement parts

• Technical services

• 24-hour telephone assistance

• Fast customer support

With wide experience in equipment development for the POLYURETHANE industry and working in the industry for more than 12 years, Marcelo Vilaça, Fiberpu director, introduced into the market a complete and low pressure equipment with CLP automation, with jacketed material reservois for a better temperature control concerning to the polyol and isocyanate.Besides these characteristics, the equipment offers excellent cost-effectiveness, once it presents a reduced cost comparing to other competing options.Another advantage provided to Fiberpu customers is the ease of trading and payment conditions.

Polyurethane Application Solution

Equipment characteristics:

7000 RPM dynamic head

Jacketed material reservois

CLP automation

High pressure material hoses

Command keyboard in the head

Material mixer in the reservois

Arm with pneumatic piston

For more information on our company and products – www.fiperpu.com.br

Phones:

55 – 11 – 5811-1125 or 55 - 11 – 7713-4234 (mobile)

São Paulo - Brazil

Anuncio Fiber PU ING.indd 1 3/7/13 10:10 AM

Address:Rua Anaburgo, 4000 – Bairro Vila NovaJoinville – Santa Catarina – [email protected]

Phone: 55 (47) 3432-0009www.mastergelcompositos.com.br

Here ideas are born and dreams come trueA new concept in compositesA new concept in compositesA new concept in compositesA new concept in composites

Injection Head

Control Cabinet

Catalyst/Hardenerratio adjustment

Catalyst/Pump

Resin/Pump

Resin/Pickup

Mains switch

Solvent tank

Catalyst Pickup

Solvet Resevoir

Machines and components• RTM injection machines with advanced technology

• Metallic inserts

• Sealing rubbers and mold construction

• Imported calibrated self-adhesive wax

MaxguardTM marine gelcoat with LE (low emission) technologyLow styrene emission with superior quality.

Own production of fi rst line materials

• Gelcoat(isophthalic, isophthalic NPG,

orthophthalic, vinylster, primer)

• Non-reactive pastes

• Molds in GFRP

• Resins

• Fabrics

• Mats

• Roving

• Peroxides

• Release agents

• Titanium dioxide

• Calcium carbonate

• Styrene monomer

• Additives

Products Resale

Joining the knowledge of Brazilian Resin Transfer Moulding market with English technology for the manufacturing of machines and molds, Mastergel makes it possible to use RTM in your company.

Cat Internacional 2013_MasterGel.indd 1 3/7/13 10:21 AM

PARTNERS

Investing in the future with responsibility

Line of products:VI offers more than hundred items:

• resins• gelcoats• reinforcements• equipment• accessories• additives• catalysts and initiators• core materials• minerals fi llers• release agents• solvents• others

www.vifiber.com.br

[email protected]

THE LARGEST DISTRIBUTOR IN

BRAZIL FOR RESINS AND FIBERS

PARTNERS

DISTRIBUTION ALL OVER BRAZIL

São Paulo • 11 2413-0344Rio de Janeiro • 21 3882-3672Goiânia • 62 3293-2855Bahia • 71 3379-6667 / 3379-4898Porto Alegre • 51 3012-5851Guarujá • 13 3358-3093Espírito Santo • 27 3359-3780Recife • 81 3339-8089Ribeirão Preto • soon

VI Fiberglass Catalogo Internacional 2013.indd 1 3/8/13 1:10 PM

MarketsColormix works in the plasti cs, thermoset plasti cs/composites, engineering plasti cs and rubber fi elds, and it also works in the paint market, civil building and cosmeti cs markets.

Diff erenti alsWe improve our competencies in regular basis to guarantee competi ti ve quality, agility, regularity, technical qualifi cati ons and supply.

Products

Colormix has a wide range of soluti ons in pigments of eff ect to sati sfy your needs in colour.With an exclusive portf olio, Colormix has a complete line of metallic, organic and inorganic pigments based on iron oxides and ultramar blues. Colormix has a specialized team and a wide applicati ons laboratory. Colormix off ers the support that you need to sati sfy your needs in soluti ons in colours and eff ects.

Organic Ftalocianines Pigments - P.B. 15:0 - Ftalocianine Blue α- P.B. 15:1 - Ftalocianine Blue α estab.- P.B. 15:3 - Ftalocianine Blue β- P.B. 15:4 - Ftalocianine Blue β non fl ocul. Organic Pigments HPP’s- P.R. 122 - P.R. 254 - P.O. 72 - P.Y. 83

- P.Y. 180- P.Y. 191- P.V. 19- P.V. 23

Inorganic Pigments - Natural Iron Oxides- Syntheti c Iron Oxides- Ultramarine Blues

Aluminum Pigments - Leafi ng and Non-Leafi ng- Flake and Silver Dollar - Paste, Powder, Pellet - Water based, solvent based, plasti fi cant - Silica coated Gold Bronze Pigments- Powder, Pellet- Silica coated

Pearlescent Pigments - Natural pearls- Syntheti c pearls- Glass pearls

Partners

Descubra as cores da sua vida

®

Address: Av. do Rio Bonito, 269 -São Paulo, BrazilPhone: (55 11) 5545-6641 / 6643

www.colormix.net.br

Cat Internacional 2013_colormix.indd 1 3/8/13 5:36 PM

JUSHI GROUP SINOSIA is part of the historical track of worldwide success of the marketing & selling arm of Jushi Group. The Jushi Group has grown into a global leading manufacturer and promoter of fi berglass products, trough the 40 years of intensive development. With the overseas expansion of the Company, Jushi Group Sinosia (a JV, forming as subsidiary of Jushi Group) has committed a rule in extended the market presence by setting up regional Head Quarter in Hong Kong, with various offi ces, distribution networks in:

1. The South Africa and Africa (incl. two (2) CSM manufacturing plant in South Africa with a total capacity of (16,000)tons, offering both Power Binder & Emulsion Binder CSM from (100grams up to 900grams) and fl exible width from (300mm up to 3300mm).

2. The South and Central America (Brazil, Egypt, Argentina, Chile, Peru, Uruguay, Ecuador, Colombia and Venezuela, Costa Rica, Panama & region)

Jushi Group Sinosia strong presence in South America, through Jushi Group (BZ) Sinosia Compositos Materiais Co., Ltda., with vast portfolio of products, technology, highly talented & skilled workforce help out the company to serve the current and future customers in this growing Composites Industry with the solutions they need to be successful.

product line

Direct RovingChopped StrandsChopped Strand MatStitch–bonded Combo MatWoven RovingAssemble RovingMultiaxial Fabrics

Complete portfolio of glass fi bers for reinforcements with over than 20 products category and more than 1,000 specifi cations.

Welcome to share for ways forward & see us at JEC, Jushi Group, booth No. J19

JUSHI GROUP (BZ) SINOSIA COMPÓSITOS MATERIAIS LTDASouth America Office: Rua Jaime Reis, n. 86, CEP: 80.510-010 Curitiba, PR – BrasilSales & Distribution Center: Rua Joaquim Simões, n. 313-A, CEP: 13.290-000Louveira – SP – BrasilT. (+55 19) 3878 1033; FAX: (+55 19) 3878 2933Email: [email protected]: www. Jushisinosia.com.br Jushi Group (HK) Sinosia Composite Materials Co., Ltd. (Regional HQ)Room 901 Bonham Centre, 79 – 85 Bonham Strand East, Central, Hong KongT. (+852) 2541 1114 (hunting); F. (+852) 2854 0404 /2544 3157

Jushi_release.indd 1 3/8/13 10:49 AM

Evonik expands services to increase support to manufacturers of PU foamsEvonik gets together with manufacturers to announce new services to adapt the foams to the new standards laid down by ABNT - Brazilian Technical Standards Association for the manufacturing of mattresses.

Evonik has expanded its South American Technical Center for Polyurethanes by purchasing new equipment and providing services to help PU foam formulators adjust their foams to the new ABNT standards (ABNT NBR 13579-1 and ABNT NBR 13579-2ABNT) concerning the manufacture of mattresses. These new standards will be mandatory as of August, 2013. The new equipment will allow clients to accurately reproduce their production process. The ability to conduct tests with foams using conventional equipment (box) and cylindrical molds will be crucial to meet the new requirements. Sampling and testing of the foams can also be done on-site to identify the best formulation to meet the demands of the new standards. Evonik held an event to announce the expansion of its platform of technical services in the Le Blanc location in Americana, state of São Paulo. Approximately 150 customers were present, consisting of at least one customer from each South American country. The group included a large number of key accounts and all of the Evonik South American distributors and agents, representing 60% of the regional PU industry. The event offered technical lectures, a visit to the new laboratory, tutorial videos and a

Polyurethanes Technical Center South AmericaI

”Comfort is so overrated.“Well, we don’t think so. We think we all deserve it. Actually we continuously develop new products which help you to innovate foams providing ever better comfort properties. Used in our cars’ seats and headrests, or for noise, vibration, and shock absorbing parts. Feeling comfortable is more than having a convenient seat it is also about feeling safe. We know the formula for comfort. Because we understand products’ needs. Do you speak foam? We do.

showroom designed especially for the occasion. “This get together was very important to introduce the major advantages of early testing and demonstrate strong technical support to the industry during this change in standards,” says Roberto Luiz, South American Regional Business Manager for Comfort & Insulation.The technical center and testing support are available to the polyurethane industry, namely clients, distributors, manufacturers of raw materials, machinery manufacturers, and other Evonik partners. This way, our customers have access to a pilot plant for their developments, which can provide better results in less time and at lower costs.

Full Technical Support

The new service package represents a high level of technical support to flexible foam manufacturers in the South American region. The equipment is able to simulate real conditions of production processes on a laboratory

scale, which will be crucial to make necessary adjustments.The South American Technical Center is designed to partner with our customers to help create solutions to challenges in the industry and help differentiate their products within the flexible foam markets. We also leverage our global range of technical support to provide the most up-to-date solutions in all regions of the world and offer support on global platforms. Among the full technical support services provided by the Technical Central are customized projects, reproduction of productive processes, evaluation of foam physical properties, and chemical and process training sessions. Clients can thus benefit from well-trained teams, obtain more performance from their products, increase efficiencies, and leverage laboratory support. The products and services to the industry of polyurethanes are a result of investment in research & development aimed at innovating and meeting the needs of this market.

+55 11 98700-0567

ProductsAQUASTAPigment dispersion used for the coloration of paints, coatings, waxes, adhesives, among other products water based. It is available in a wide range of colors and tonalities.

MOTOASTAPigment dispersion used for the coloration of ether polyurethane system. It is available in a wide range of colors and tonalities with high concentration of pigment and high coloring power.

PASTERNIZ MPigment dispersion in a multicompatible solvent, used for the coloration of coatings, industrial paints, leather and shoes soles fi nishing paints, metal fi nishing paints, architectural paints, auto refi nishing paint and adhesives, among other products solvent based. It is available in a wide range of colors and tonalities with high concentration of pigment and high coloring power.

POLASTAPigment dispersion used for the coloration of polyvinyl chloride emulsion (plastisol) and polyurethane, made with plasticizer vehicle. It is available in a wide range of colors and tonalities with high concentration of pigment and high coloring power.

POLÉSTERPigment dispersion used for the coloration of ester polyurethane system. It is available in a wide range of colors and tonalities with high concentration of pigment and high coloring power.

TINTASTATintasta TF it is a In Mould Coating - IMC for polyurethane.

R. Joaquim Correia Junior, 4590 - Distrito Industrial CEP 14406-093 - Franca - SP - Brazil

Phone 55 16 3711.3555www.astaquimica.com.br

Os pigmentos desta linha são dispersos e moídos em Fluído de Silicone

destinados à coloração de BORRACHAe FLUÍDO de SILICONE.

Como toda linha ASTA sua formulação é de alta concentração de pigmento,

resultando em uma ótima cobertura e tingimento.

A linha SILPAST pode ser desenvolvida na cor desejada pelo cliente, sendo

fornecida em baldes:

" "

3, 10 e 20 Kg.

Os pigmentos da linha ASTAPOX são destinados à coloração de

sistemas EPÓXI. Como são dispersos e moídos em "Resina Epóxi Isenta

de Solvente", facilita sua homogeneização e incorporação na formulação

da tinta, assim otimizando e agilizando o processo com a vantagem de

não gerar poeira.

Trata-se de um produto com alta concentração de pigmento, resultando

em uma ótima cobertura e facilitando a formulação de cores pelo seu alto

poder tintorial.

A ASTAPOX confere maior

facilitando assim sua aplicação e eliminando possíveis manchas e

riscos.

A linha ASTAPOX pode ser desenvolvida na cor desejada pelo cliente,

sendo fornecida em baldes: .

alastramento e nivelamento na tinta epóxi,

3, 10 e 20 Kg

São pigmentos dispersos e moidos em "Resina Poliéster Não Reativa"

destinados à coloração de RESINAPOLIÉSTER e .

Possui alta concentração de pigmento e uma variada gama de cores,

dando liberdade de criação a seus projetos.

A linha ASTAGEL pode ser desenvolvida na cor desejada pelo cliente,

sendo fornecida em baldes:

GELCOAT

3, 10 e 20 Kg.

Obs.: A ASTA não utiliza pigmentos com "METAL PESADO".

ASTAPOXAstapox pigments are appropriate to the coloring of epoxy systems. As they are dispersed and ground in solvent free epoxy resin, they permit easy homogenization and incorporation in the paint formulation.

ASTAGELDispersed and ground pigments in “Non Reactive Polyester Resin” for the coloring of Polyester Resin and Gelcoat. They present high concentration of pigments and a wide range of colours.

SILPASTThis line of pigments are dispersed and ground in “Silicone Fluid”, and should be used in the coloring of rubber and silicone fl uid.

ASTA QUÍMICA was founded in june of 1988, initially known as Asta Tintas Especiais (Asta Special Paints), started as a producer of pigment pastes used for the coloration of polyurethane soles, PVC and paints. Thru the time, the company invested in technology, starting its business in other markets like: industrial paints, decorative paints, furniture paints, automotive paints and polyurethane pieces, toys, adhesives and polyurethane foams. Nowadays, our products are used in: PVC emulsion, foam and molded pieces of polyurethane, water based paints, artifi cial leather, technical pieces of polyurethane, polyurethane systems, high performance solvent based paints, silicone, gelcoat (polyester resin), epoxy, polyurea, and others.

SPECIALITY The ASTA QUÍMICA has two laboratories. The laboratory for control of quality, that verifi es the fi nal products and the raw materials, and the laboratory for research & development, always searching for the utmost in technology and cost-benefi t. Besides, we count with a high qualifi ed technical crew, specialized in tailor made developments, according to the technical and application necessities. Besides our quality, we are always investing in the quality of our services, searching for total satisfaction of our clients.

Asta Quimica_cat int 2013.indd 1 3/7/13 5:09 PM

Air Plast is primarily engaged in PET – polyethylene terephthalate micronizing, and in its use as a raw material in polyurethane foam industry, as well as blends with other resins. Based on advanced research, with ecological conscience, Air Plast developed a PET polymer micronizing process, which was adjusted in terms of rheology to be used as a component in polyurethane foam formulations, with the objective of reducing costs and GHG emission in the productive process (in several densities, it replaces part of the polyol). Air Plast also produces basic PET polyester polyol applied in polyurethane foams formulations such as molded, rigid, structural and others. The company introduced into the market:• PET based TPU – this thermoplastic polyurethane, with excellent mechanical resistance, can be used in many markets: shoes, hydraulic hoses, electrical wire and cabling, etc.• Copolymer to flexible foams – this product replaces the conventional copolymer, and it can be applied in steering whell, surf boards, fi lters, automotive parts, etc.All these new technologies offers reduced costs and excellent performance.

Benefits of use:• Reduction of production costs• Ecological sustainability• Less gas emissions in the production process

ProductsMicronized PETPolyurethane foams may include micronized PET with the benefi ts of reducing production costs and the emission of pollutants, keeping the same mechanical properties in accordance with the technical rules governing the sector. TM 40 micronized PET, in extremely low particle size, is used as a component in several densities polyurethane foams, replacing parts of the polyol by weight, ranging from 10% to 40%, according to the required density. Thus, the micronized PET interacts with the other components, becoming part of the foam formulation. This means that it doesn´t have either the “fi ller” action or behaviour, but keeps the same mechanical properties required by the law. It leaves no ash content. The product is supplied with a polymer nanoparticle percentage.

Airpol T400 Polyester PolyolIn line with the global trend of new composites products search and sustainability with production costs reduction, Air Plast developed AIRPOL T400. PET polyester polyol is obtained through a polymer depolymerization process, held in reactors, which resulted in a product with the same chemical properties of a conventional polyester polyol. The result is a high miscible polyol, compatible with various types of MDIs, with a hydroxyl number around 200 to 250 KOH/g (this rate can range from 60 to 450, according to the need) and viscosity between 2000 and 5000 CPs. The material can be satisfactorily used in rigid, semi-rigid, molded, injected foams, as in other blends.

Benefits of use:• Reduction of production costs• Ecological sustainability• Less gas emissions in the production process

Thus, the micronized PET interacts with the other components, becoming part of the foam formulation. This means that it doesn´t have either the “fi ller” action or behaviour, but keeps the same mechanical properties required by the law. It leaves no ash content. The product is supplied with a polymer nanoparticle percentage.

various types of MDIs, with a hydroxyl number around 200 to 250 KOH/g (this rate can range from 60 to 450, according to the need) and viscosity between 2000 and 5000 CPs. The material can be satisfactorily used in rigid, semi-rigid, molded, injected foams, as in other blends.

AddressAvenida Guaraciaba, 268 - Sertãozinho - Mauá - SP 09370-840 - BrazilPhone 55 11 4544.1252 - www.airplast.com.br - [email protected]

Air-plast_cat_int 2013.indd 1 3/8/13 2:13 PM

Companies profi le

Machines & EquipmentRaw materials

[email protected]

(55 11) 2899-6395

Company´s logoBanner 200x140px




Company´s logoBanner 200x140px Company´s logo

Banner 485x90px


Esporte & lazerMercado de bicicletas encerra 2012 dentro da expectativaAções tomadas pelo Governo Federal no fi nal de 2011elevando as alíquotas de importação de peças de 20% para 35% foram fundamentais no desem-penho do setor no ano que termina...Leia mais

AutomotivoBateria para veículos elétricos e ônibus híbridosSomente a cidade de São Paulo conta com mais de sete milhões de veículos automotores. Eles são os principais responsáveis pela baixa qualidade do ar e emissão de gases que provocam o efeito estufa...Leia mais

FEIPLAR COMPOSITES & FEIPUR

Feira e Congresso Int. de Composites, Poliuretano e Plásticos de Engenharia, em São Paulo, SP, Brasil. Veja com de-talhes o público que visitou o evento: Número de visitantes – Total: 14.500...Leia mais

ContactKnow how to advertKnow the online catalogueHome

Aut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarResidências • Prédios • Escritórios • Náutica • Hotelaria

Aut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizarAut matizar

Forms of participation

[email protected] (55 11) 2899-6395Contacts:

a) 3 products insertion = free b) Unlimited number of products – Valour: US$ 420 – for a three-month period US$ 792 – for a six-month period US$ 1.536 – for one-year periodBene� ts:1) Complete information on your company (company´s name, address, phone, fax, email, website, complete line of products) in the

“Company pro� le” session.2) Your company´s logo in the home page3) Your company´s logo in your main products pages4) The name of your company will be in bold in all lists of products (supplied by your company) + link to your company´s website5) Your company can make any changes, at any time6) At the homepage, there will be products releases. Your company can send products texts to be released in this area of the online

catalogue – no limit

Catalogo de fornecedores participac‟ao.indd 1 3/8/13 10:16 AM

Products

55 11 3728-8000 www.polystell.com.br

Polystell do Brasil Ltda, a Brazilian additives manufacturer, certified byISO 9001 standards, is attentive to market innovations and in search ofnew technological partnerships. It is considered one the most importantcompanies in the sector, since the supply of conventional additives fordecorative, automotive, boat, road marking and industrial paints, as wellas in the development of customized solutions which aggregate costreduction in a high value-added product. For the composites industry,Wildon Lopes, chemical engineer and executive director, says that Polystellkeeps in its line of products more than hundred items, including additivesfor gel coats, epoxy, unsaturated polyester, polyurethane and others.

QUALITY AND EFFICIENCYIN ADDITIVES AND CHEMICAL SPECIALTIES

POLYSTELL ADDITIVES – performance and solutions in:

UV Absorbers, alkaline, antiblocking, antifoaming, antistatic, antifloculante, anticratera, Low odor agents, polar activator, coalescent, releasing, emulsifiers, defoamers, dispersant, diluents for laminating, stabilizer, matting agents, water-repellent, surface levelling, pigmented pastes, liquid colors, adhesion promoter, surface tension reduction, surfactant, styrene monomer suppressant, wetting agents, besides additives for biodegradable masterbatch, antifoam (mineral oil based, silicone-free and PH extreme); thixotropic, flexibilizing, impact and gloss agents.

Highlight is given to:POLYVELL 3485-LSE – REDUCTION ODOR AGENT for DCPD – Unsaturated polyester resin.POLYVELL 3700 – Low odor agent for unsaturated polyester resin.POLYUMEC 5752 D10 – Green Line – Wetting and Styrene reductor (low cost).POLYUMEC 5491-ROLL- OFF – wetting additive - reduces the need of using deep rolling during the lamination process.POLYUMEC 5802-DI – Resistance and aesthetic quality to SMC/BMC. POLYADIT 4004 – Liquid rheology additive for gelcoat.POLYVELL 3000 – Silicone based surface additive - reduces the “surface tension” of the gelcoat.POLYNano-SILVER – Antibacterial technology and antifungal additives for composites.POLYNano-CLAY – Mechanical and water barrier properties for polyester Gelcoat system.POLYADIT 4108 – wetting and dispersing additive for gelcoat.POLYVELL 3479 – Superior finish gloss and low porosity surface additive for gelcoat.

Cat Int 2013 Polystell.indd 1 3/6/13 9:17 AM

Partners

Address

Technical knowledge and Composites experience ABCol, distributor of raw materials, auxiliary products, machines and accessories since 1985, supplies items to the whole Brazilian territory. One of the largest distributors in the country, Abcol offers more than hundred products for the manufacturing of parts in composites. Abcol keeps a wide area for raw materials stocks and has performed innovative actions such as the materials kits. Buying these kits, the processors receive raw materials in the right quantity and size for the manufacturing of their parts. The customer informs Abcol about its products and Abcol prepares all the pieces of raw materials, reducing drastically time and loss of material. These kits are prepared to marine and wind energy sectors.

R. dos Mármores, 67 - Vila ProsperidadeSão Caetano do Sul – SP – BrazilPhone: 11 2137-3665 - Fax: 11 2137-3669

Quality • Advanced Technology • Technical SupportQuality • Advanced Technology • Technical SupportQuality • Advanced Technology • Technical Support

The best way between the manufacturer and the processors

www.abcol.com.br

Cat Internacional 2013_Abcol.indd 1 3/6/13 6:26 PM

Since 1970, pioneer in Polyurethane injection in Brazil, the company has been using its own technology in raw material processing and tool manufacturing. BLITZ Plastics has undergone a deep reorganization, presenting intelligent and customized solutions, offering technical support throughout the project, focusing on its clients, suppliers and strategic partners. By doing so, it became an agile, modern and competitive company, incorporating in its portfolio new products and services.

BLITZ Special Projects is a company with leading technology and qualified professionals, concerned to the environment and sustainable development, following the changes in the global scene.It is certified according to ISO 9001:2008 and ISO TS16949:2009 standards. The company is located in Ribeirão Pires (SP), with an area of 53,350 m2, within easy reach of São Paulo capital and close to main highways.

We operate and supply parts for the following markets:

Agricultural machinesATM´s machinesAutomotive ( cars, trucks and buses )Civil ConstructionConstruction machinesDefense ( Army / Navy )Industrial ProductsMarineMedical-hospital equipment

For more information, please visit www.blitz.ind.br Phone: 55 11 4828-3444 / [email protected]

We have the following processes in line:

• Coverings & molded

• Glass Wool Insulation Production

• HF Welding ( sunvisors )

• Metton ( DCPD ) – Liquid Molding Resign

• Polyurethane Injection:

- Integral-Skin

- Flexible

- Semi-Rigid

- Rigid

- RIM / RRIM

• Polyurethane Rigid Foam Production

• Surface treatment and Painting

• Tools and Devices development

43 years

Cat Internacional 2013 Blitz.indd 1 3/7/13 10:08 AM

THE FIRST FILAMENT WINDING MACHINE WITH FOUR PROGRAMMABLE AXES [CNC KTH2012] IN BRAZIL

Rua Dilma Cazoto Nascimento, 60 • Vargem Grande Paulista – SP – Brazile-mail: korthfi ber@korthfi ber.com.br • Phone: (55 11) 4612-0488

www.korthfi ber.com.br

Set up a meeting and come to see our Filament Winding equipment

This equipment enables the manufacturing of cylindrical and conical pipes, and connectorsIt also allows the manufacturing of pressure vessel, with polar windingVersatile machine, with high productivity

Totally controlled by Korthmix® CNC

NEW TECHNOLOGY 1

NEW TECHNOLOGY 2

NEW TECHNOLOGY 2

4-axe CNC machine

COIL TENSIONER

Specially developed to work with carbon and aramid fi bers, this equipment allows the individual unwinding traction control of up till 16 fi ber rolls. With a solid construction and Tefl on® (PTFE) guide rollers with spherical bearings, it enables to guide the carbon or aramid tapes, without twists existence till the wet bath entrance. It can be used with the fi lament winding machine from Korthfi ber, or with other equipment which was projected to work with these sorts of fi bers.

Korthfiber Cat Int 2013.indd 1 3/6/13 2:07 PM

*This schedule can be changed without previous notice

More information: (55 11) 2899-6381 [email protected] www.tecnologiademateriais.com.br

EDITORIAL CALENDAR* 2013Subjects January/March March/April May/June July/August September/October November/

December

Aerospace EmbraerAviation market in Brazil

New technologies + Fiber Placement

EAB 2013 + Hand lay-up

Latin American aviation market

International technologies

Automotive Electric vehicles New technologies AutomecAutomotive research + Technologies for buses

Autoparts 2013Duas Rodas Exhibition + Fenatran

Civil Building Civil Building Guide

Pole market + Feicon 2013

Gelcoats/topcoatsSynthetic marble and solid surface

Tiles, coverages and similar

Infrastructure for sports

Nautical/Marine New technologiesRio BoatShow/Motorshow

Epoxy resin Navalshore 2013São Paulo BoatShow

Aggressive environments

Vinylester resinsEquipments for filament winding

Technologies for coatings

Petrol & GasSugar cane and alcohol

Basic sanitation

Processes Infusion/vacuum RTM Pultrusion guide BMC/SMCContinuous lamination

Innovation in processes

Sustainability Wind energyResins of renewable sources

Recycling Solar power Greenbuilding 2013 Clean industry

Reinforcements Glass fiber Carbon fiber Natural fibers Aramid fiber New reinforcements Nonwoven

ApplicationsFeiplar Composites 2013/ACMA 2014

JEC 2013 Feiplastic 2013 Sports and leisureComposites Europe 2013

Excellence Award + K 2013

Epoxy Raw materials for moulds

High Tg resins Lamination

Technologies Tools and accessories

Intertial cores Equipments Shield Prepregs Flame retardance

Raw materials Organic peroxides and accelerators

Adhesives – raw materials and equipments

Release agents Fillers and AdditivesLong fiber thermoplastics

Dyes and pigments

Industries AbrasivesElectric & Eletronical

AgroindustrySpray-up and hand lay-up

Defense and security Paper and pulp

Electric & Eletronical Epoxy FIEE Applications

Railway New technologies New applicationsInternational highlights

Market Software and automation

Composites distribution

Distribution – engineering plastics

Special Internet Plastic mass Polymeric concrete Class A surface Craft

Closing dates 18th March 5th April 4th June 2nd August 24th September 31st October

PAUTA_PR_2013_CAT INT.indd 1 3/7/13 2:24 PM

Subjects January/March March/April May/June July/August September/October

November/December

Thermal insulation Panels manufacturing

Spray applicationNaval market applications

Systems Febrava 2013 New products

Technologies Release agents Flame retardance Polyurea Recycling IsocyanatesInternational developments

Raw materials Additives Polyether polyolAdhesives and

sealantsPolyester polyol Pigments Biocides

Equipment Low pressureMolds and prototypes

Foam blocks High pressure Blowing agentsMolded flexible

foam

Industries Wind energy Trains Mining Petrol & Gas RehabilitationElectric &

Electronical

Process & Materials RIM/RRIM Elastomers Feiplastic 2013 Polyisocyanurate Integral skin K 2013

Civil building Civil Building GuideWaterproofing +

Feicon 2013Coatings Acoustic insulation Greenbulding 2013

Façades & building revitalization

Automotive New applications TPU Automec 2013 New technologies Autoparts 2013Flexible foam applications

Furniture FIMMA 2013Flexible foams

systemsInternational news

Developments in Brazil

Brasil Móveis 2013

Shoes Couromoda 2013 Systems Fimec 2013 TPU New applications TPU

Applications Sport infrastructure Tags and giftsInternational

highlights

Market Distribution

Internet Special Inspiramais 2013Brazil Road Expo

2013Frames Marine Abrafati 2013

Closing dates 18th March 15th April 4th June 2nd August 14th September 31st October

*This schedule can be changed without previous notice

More information: (55 11) 2899-6381 [email protected] www.tecnologiademateriais.com.br

EDITORIAL CALENDAR* 2013

PAUTA_PU_2013_CAT INT.indd 1 3/7/13 2:24 PM

www.congresosudamericano.com(55 11) [email protected] information:

II South American Congress on Composites, Polyurethane and Engineering Plastics

Bogota, Colombia4th and 5th September, 2013

III South American Congress on Composites, Polyurethane and Engineering Plastics

Porto Alegre, RS, Brazil6th and 7th November, 2013

The target of the congress is to present raw material, equipment, auxiliary materials and other solutions used in the manufacturing of parts in composites, polyurethane and engineering plastics. The lectures will be held simultaneously in three rooms (1 room for composites, 1 for polyurethane and 1 for engineering plastics). During the two days of the event, the attendees will get in touch with a wide range of new solutions (or highlighted technologies) to manufacture their products. There will be simultaneous translation Portuguese / Spanish or English / Spanish.

Alongside with the lectures it will be held the Table-top, an exhibition area with tables (and chairs) for the presentation of products and also for the customer attendance. Besides that, it will also be organized Business Roundtables, with the goal of bringing potential customers to the attendance tables. There will be collective support for Portuguese/Spanish or English/Spanish translation.

The public has free entrance. However, for the lectures (conference), the participation will be directed and exclusive to manufacturers of parts (processors) in composites, polyurethane and engineering plastics or industrial users. It will not be allowed the participation of suppliers of raw materials or equipment, with the exception of the sponsors of this event. For the Table-top exhibition and Business Roundtables, there are no restrictions on the entrance.

25

Congresso sudamericano_ING.indd 1 3/8/13 3:53 PM

www.congresosudamericano.com(55 11) [email protected] information:

ALPHA SPONSORSHIP 1) A 40-minute technical-commercial presentation, in one of the two-

days of the event (to avoid the repetition of the presentation theme, the control will be done by the organization according with the date of the sponsorship acquisition)

2) One table in the Table-top area (1 table + 3 chairs), with the possibility of distribution of technical material, commercial samples and gifts to event attendees

3) Possibility of placing 2 banners (one banner in the lecture room in the day of the sponsor´s lecture, and one banner in the Table-top area, in the two days of the event)

4) Distribution of technical material, commercial samples and gifts to the attendees of the event in the two days

5) Publication of your logo in 40 materials - before, during and after the event

6) Publication of your logo in the paper block that will be inserted in the folders distributed to the attendee

7) Coverage of the sponsor presentation at Revista Composites e Plásticos de Engenharia or Revista Poliuretano (Composites and Engineering Plastics Magazine or Polyurethane Magazine)

8) Exclusive release of the sponsor company will be sent to processors all over South America for the Business Roundtables meetings

9) Press release in Portuguese, Spanish and English on the technologies that will be presented by the sponsor company

10) Registration of three professionals from the sponsor company11) Company name mention in the press releases12) Possibility to make promotions, distribute gifts, make drawings, and/or

any kind of action or merchandising with all the event attendees, with previous approval of the organization

13) Logo appearance at the Congress official website14) Insertion of the sponsor´s company logo at the site, with link to the

sponsor´s homepage15) Possibility of institutional video demonstration in the Table-top area and

Business Roundtables (maximum 3 minutes)16) Insertion of the sponsor´s company logo in invitations and certificates17) Publication of the corporate profile of the sponsor´s company at the

website18) Mention of the company name in the opening and closing ceremonial19) Possibility of actions in the reception, coffee-break and lunch time 20) Online exclusive invitation of the sponsor´s company

BETA SPONSORSHIP 1) One table in the Table-top area (1 table + 3 chairs), with the possibility

of distribution of technical material, commercial samples and gifts to event attendees

2) Possibility of placing 2 banners (one banner in the lecture room in the day of sponsor´s lecture, and one banner in the Table-top area, in the two days of the event)

3) Distribution of technical material, commercial samples and gifts to the attendees of the event in the two days

4) Publication of your logo in 30 materials - before, during and after the event

5) Publication of your logo in the paper block that will be inserted in the folders distributed to the attendees

6) Exclusive release of the sponsor company will be send to processors all over South America for the Business Roundtables meetings

7) Press release in Portuguese, Spanish and English on the technologies that will be presented by the sponsor company

8) Registration of two professionals from the sponsor company9) Company name mention in the press releases10) Possibility to make promotions, distribute gifts, make drawings, and/or

any kind of action or merchandising with all the event attendees, with previous approval of the organization

11) Logo appearance at the Congress official website12) Possibility of institutional video demonstration in the Table-top area and

Business Roundtables (maximum 3 minutes)13) Publication of the corporate profile of the sponsor´s company at the

website14) Mention of the company name in the opening and closing ceremonial15) Possibility of actions in the reception, coffee-break and lunch time 16) Online exclusive invitation of the sponsor´s company

The companies can take part of the event through the acquisition of two different sponsorship quotes:

26

Congresso sudamericano_ING.indd 2 3/8/13 3:53 PM

U m a p u b l i c a ç ã o p a r a o s

m e r c a d o s d e c o r r o s ã o ,

c o n s t r u ç ã o c i v i l ,

t r a n s p o r t e e

e s p o r t e & l a z e r

ISSN-1518-3092

w w w. t e c n o l o g i a d e m a t e r i a i s . c o m . b r

Publicação daEditora do Administrador

Ano XV • nº80mai./jun. 2012

CasaE: materiaisJEC: novidades

Feicon Batimat 2012Argentina: copoliéster e SMC

CasaE: materiaisJEC: novidades

Feicon Batimat 2012

SAE Brasil: Nanotecnologias

Petróleo & Gás

Publicação da

Capa_PR80_04.indd 1

7/24/12 10:35 AM

More information on advertising:Email: [email protected]: 55 11 2899-6395www.tecnologiademateriais.com.br

Argentina: copoliéster e SMC

U m a p u b l i c a ç ã o p a r a o s

m e r c a d o s d e c o r r o s ã o ,

c o n s t r u ç ã o c i v i l ,

t r a n s p o r t e e e s p o r t e & l a z e r

ISSN-1518-3092w w w. t e c n o l o g i a d e m a t e r i a i s . c o m . b r


Ano XV • nº82out./nov. 2012

Policarbonato: coberturasRetardância à chama

Ferroviário: peçasAçúcar e álcool: mercado

Policarbonato: coberturas Açúcar e álcool: mercadoRetardância à chama

Ferroviário: peças

Construção civil:Telhas em composites

Painel Eventos EsportivosPainel Petróleo e Gás

Capa_PR82_01.indd 1

12/3/12 3:48 PM

ISSN-1518-3092w w w. t e c n o l o g i a d e m a t e r i a i s . c o m . b r


Ano XV • nº82out./nov. 2012

Telhas em compositesTelhas em composites

Painel Eventos EsportivosPainel Eventos EsportivosPainel Eventos EsportivosPainel Eventos EsportivosPainel Eventos EsportivosPainel Petróleo e GásPainel Petróleo e Gás

w w w. f e i p u r. c o m . b r

w w w. f e i p l a r. c o m . b r

EDIÇÃO DE COBERTURA

FEIPLAR COMPOSITES& FEIPUR 2012

ISSN-1518-3092nov./fev. 2013 www.tecnologiademateriais.com.br

Expositores • Congressos • Painéis Setoriais

Prêmio Excelência 2012

Demonstrações Técnicas • Compocity • Hall da Fama

Conferência SAMPE Brasil

Capa_EDICAO DE COBERTURA_01.indd 1

2/15/13 4:14 PM

Uma publicação para os mercados da

construção civil, automotivo, calçados,

mineração, isolamentos térmico e acústico,

refrigeração, moveleiro, entre outros

Poliureia: o estádio de remo da Lagoa Rodrigo de Freitas

P u b l i c a ç ã o d a E d i t o r a d o A d m i n i s t r a d o r • A n o X • N º 4 9 • a b r i l / j u l h o • 2 0 1 2



Correias de PU Retardantes de chamaImpermeabilização Feicon-Batimat 2012

Agentes de expansão

Agroindústria: semirrígidas

Capa_PU49_01.indd 1

6/20/12 5:14 PM

Poliureia: o estádio Poliureia: o estádio Poliureia: o estádio Poliureia: o estádio Poliureia: o estádio Poliureia: o estádio de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa de remo da Lagoa Rodrigo de FreitasRodrigo de FreitasRodrigo de FreitasRodrigo de FreitasRodrigo de FreitasRodrigo de Freitas

P u b l i c a ç ã o d a E d i t o r a d o A d m i n i s t r a d o r • A n o X • N º 4 9 • a b r i l / j u l h o • 2 0 1 2P u b l i c a ç ã o d a E d i t o r a d o A d m i n i s t r a d o r • A n o X • N º 4 9 • a b r i l / j u l h o • 2 0 1 2


Feicon-Batimat 2012

Agentes de expansãoAgentes de expansãoAgentes de expansãoAgentes de expansãoAgentes de expansãoAgentes de expansão

Agroindústria: semirrígidasAgroindústria: semirrígidasAgroindústria: semirrígidasAgroindústria: semirrígidasAgroindústria: semirrígidasAgroindústria: semirrígidasAgroindústria: semirrígidas

Uma publicação para os mercados da

construção civil, automotivo, calçados,

mineração, isolamentos térmico e acústico,

refrigeração, moveleiro, entre outros

Adesivos para

móveis

P u b l i c a ç ã o d a E d i t o r a d o A d m i n i s t r a d o r • A n o X • N º 5 0 • a g o s t o / s e t e m b r o • 2 0 12



Poliol poliéter: mercadoMineração: tipos de peças

Espumas de alta resiliênciaAcústica: tecnologias

Desmoldantes: produtividade

Capa_PU50_01.indd 1

9/14/12 10:03 AM

P u b l i c a ç ã o d a E d i t o r a d o A d m i n i s t r a d o r • A n o X • N º 5 0 • a g o s t o / s e t e m b r o • 2 0 12


Acústica: tecnologias

Isolamento térmico:

matérias-primas e processos

P u b l i c a ç ã o d a E d i t o r a d o A d m i n i s t r a d o r • A n o X • N º 51 • o u t u b r o / n o v e m b r o • 2 012



Construção civil: casa de PU PU: 75 anos de históriaEquipamentos: avanços Calçados: tecnologia

Sustentabilidade: Green Building

Capa_PU51_01.indd 1

11/23/12 3:57 PM

EditorialComposites & Engineered Plastics Magazine aims to show new technologies (raw material and equipment), general processing solutions and ideas for new applications, concerning composites and engineered plastics. CirculationIt is published monthly and circulates all over South America. ReadershipThis magazine is distributed to composites and engineered plastics processors and user industries (automotive, aerospace, rail, civil building, architecture, sport & leisure, chemi-cal and petrochemical, electric/electronics, marine, pulp & paper, water disposal, sugar & alcohol, Government, universities, others.) 12.000 copies

EditorialPolyurethane Magazine aims to show the most advanced solutions for the manufacturing of polyurethane parts (fl exible, semi-rigid, rigid, structural, integral skin, CASE). It describes the available technologies in the Brazilian market (raw material and equipment), new applications and the development in several markets. CirculationIt is published monthly and circulates all over Brasil and in some South American countries. ReadershipThis magazine is distributed to polyurethane processors and user industries (automotive, furniture, footwear, civil building, architecture, sport & leisure, chemical and petrochemical, electric/electronics, mining, refrigeration, ther-moacoustic isolation, coatings, Government, universities, others.) 8.000 copies

Check the Editorial Calendar at www.tecnologiademateriais.com.br

Revistas_cat_int.indd 1 3/6/13 3:13 PM

November 2014Expo Center Norte – São Paulo, SP – Brazil

About 2012 edition:

14.500 visitors from 37 countries

290 exhibitors from 26 countries

9 technical demos for 580 professionals

111 technical presentations for an audience of 2.600 professionals

Composites and Polyurethane Excellence Awards

48% of the visitors were composites, polyurethane or engineered plasticsprocessors

Enhance your business in Latin America

8th International Exhibition and Conference on Composites, Polyurethane and Engineered Plastics

Phone: 55 11 [email protected]

www.feiplar.com.br or www.feipur.com.br

Feiplar catalogo intenacional 01.indd 1 3/6/13 3:37 PM

catalogo de fornecedores internacional 2013

Documents

polyurethane magazine

international composites

south american congress

engineered plastics

engineered plastics

online composites

feiplar composites feipur

administrador ltda