catalog - tmi systems design corporation description tmi no. page description tmi no. page...
TRANSCRIPT
the
catalogaccessories
accessories
INDEX
PAGEDESCRIPTION PAGEDESCRIPTIONTMI NO. TMI NO.
MISCELLANEOUS (CONT’D)
Finished Back Panels: 2, 3A1200, A1210
Swing Door Insert: 4A1298
Soffit Panels: 4A1300, A1310
Light Valance Panel: 4A1360
Shelves: 5A1400, A1571
Standards: 5
Brackets:
A2000, A2020
A2030, A2050 5, 6
Hanger (Captive): 6A2131
Louver Vent: 6A2210
Eraser Tray: 6A2250
Keyboard Tray: 6, 7A2310, A2320
Pencil Drawer: 7A2330
Grommet: 7A2340, A2350, A2360
Tote Trays: 8A2400, A2410
Tackboard: 8A2860
Markerboard: 9A2960
Toe Kick Vent: 10A8610
Wire Management: 10A8840
Expanded Metal: A8600 9
Geoshapes:Square: 11
Round:
X4000
X4100 11
Bullet: X4200 11Half Round: X4300 12
Gate: 12X7000
Fillers: FILLERB, FILLERW,
12FILLERT
COUNTERTOP SUPPORTS
Laminated Panels:
Single Faced: 1Double Faced: 1Angled: 1
A1000
A1010
A1020, A1040, A1050
Metal Supports:
Support Leg: 9Support Bracket:
A7410
A7453 9
Webbed Stiffener: 9A7620
KNEESPACE CLOSURE
Single Wide: 2A1100
Double Wide: 10A9616, A9619
Triple Wide: 10A9617
ACCESSORY COUNTERTOPS
Laminated:
Square: 11Round: 11
X2000
X2100
MISCELLANEOUS
Apron Rails: 2A1110, A1120
Coat Hook Panels:
Single Row: 3Double Row:
A1290, A1291
A1295, A1296, A1297 3, 4
Dispensing Trays: 8A2415, A2416
Toe Kick Panel: 2A1150
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
ACCESSORIES 1
A1000
A1050
A1010
A1020
A1040
Single face countertopsupport panel with VGSlaminate on both sidesand PVC edging onexposed edges.
Double face countertopsupport panel with VGSlaminate on both sidesand PVC edging onexposed edges.
Countertop support panelwith an angled front edgeextending to the floor, VGSlaminate on both sidesand PVC edging on exposededges.
Countertop support panelwith VGS laminate on bothsides, PVC edging on allexposed edges and a 3-1/2”wide mounting plate. Thepanel has a 6” high frontedge and is cut back at 45degrees.
Countertop support panelwith VGS laminate on bothsides, PVC edging on allexposed edges and a 3-1/2”wide mounting plate. Thepanel has a 4” high frontedge and is cut back at 45degrees.
3/4” 30”34”36”
13”17”23”28”
3/4” 30”34”36”
26”34”46”56”
3/4” 30”34”36”
13”17”23”28”
3/4” 21-3/8” 21-3/8”
3/4” 21-3/8” 21-3/8”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.
ACCESSORIES 2
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
A1100
A1200
A1110
A1120
A1150
Removable kneespaceclosure panel with VGSlaminate finish.
Front apron rail with PVCedging on the bottom edge.
Side apron rail with PVCedging on the front, backand bottom edges.
Finishing toe kick panelwith PVC edging on top edge.
For use with the A1210 backpanel to close off kneespacetoe kicks in island situations.
Back panel with VGS laminateon one side, balanced withCLS laminate, and PVC edgingon exposed edges.
Kneespace in island situationscan be closed off by using anA1150 toe kick panel.
24”27”30”33”36”
3/4”
24”27”30”33”36”39”42”45”48”
3/4”
13”17”23”28”
3/4”
24”27”30”33”36”
3/4”
119”Max.
3/4”
30”34”36”
3”Min.
3”Min.
6”
30”34”36”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
ACCESSORIES 3
A1210
A1296
A1290
A1291
A1295
Back panel with VGS laminateon both sides and PVC edgingon exposed edges.
Kneespace in island situationscan be closed off by using anA1150 toe kick panel.
Coat hook panel with a singlerow of cast satin aluminumdouble coat hooks spaced6” apart.
The panel is finished with VGSlaminate and PVC edging onall four edges.
Coat hook panel with a singlerow of cast satin aluminumcoat hooks spaced 6” apart.
The panel is finished with VGSlaminate and PVC edging onall four edges.
Coat hook panel with tworows of cast satin aluminumdouble coat hooks spaced6” apart.
The panel is finished with VGSlaminate and PVC edging onall four edges.
Coat hook panel with tworows of cast satin aluminumcoat hooks spaced 6” apart.
The panel is finished with VGSlaminate and PVC edging onall four edges.
119”Max.
3/4”
12”15”18”21”24”27”30”33”36”
3/4”
12”15”18”21”24”27”30”33”36”
3/4”
12”15”18”21”24”27”30”33”36”
3/4”
12”15”18”21”24”27”30”33”36”
3/4”
30”34”36”
6”
6”
6”Min.
6”Min.
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.
ACCESSORIES 4
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
A1297
A1360
A1298
A1300
A1310
Coat hook panel with tworows of cast satin aluminumcoat hooks spaced 6” apart.
The panel is finished with VGSlaminate and PVC edging onall four edges.
Swinging door insert withspring hinge.
Soffit front closure panelwith VGS laminate on frontside, balanced with CLSlaminate, and PVC edgingon all exposed edges.
Soffit side closure panelwith VGS laminate on frontside, balanced with CLSlaminate.
Field installed continuouslight valance panel withVGS laminate on front side,balanced with CLS laminateand PVC edging on thebottom edge.
12”15”18”21”24”27”30”33”36”
3/4”
8”16”
3/4”
119”Max.
3/4”
119”Max.
3/4”
6”Min.
8”16”
AsReq’d
2-1/2”Min.
119”Max.
3/4”AsReq’d
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
ACCESSORIES 5
A1400
A2020
A1571
A2000 Minimum of 1 required for every36” of shelving.
Minimum of 1 required for every36” of shelving.
Shelf with VGS laminate onboth sides and PVC edgingon all four edges.
Folding shelf assembly withtwo spring loaded brackets.
Shelving brackets are loadrated at 88 pounds per pair.
Shelving standard for usewith A2030 brackets andA1400 shelving.
Heavy duty shelving standardfor use with A2050 bracketsand A1400 shelving.
12”15”18”21”24”27”30”33”36”
12”14”16”18”
15”18”21”24”27”30”33”36”
12”15”18”
5/8” 1/2”
7/8” 3/4”
3/4”1”
3/4”1”
12”24”36”48”60”72”84”96”
12”24”36”48”60”72”84”96”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
A2030 Minimum of 1 required for every36” of shelving.
Shelving bracket for usewith A2000 standards andA1400 shelving.
8”10”12”14”18”20”
Copyright 2017 TMI Systems Corporation. All rights reserved.
ACCESSORIES 6
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
A2250
A2050
A2131
A2210
Minimum of 1 required for every36” of shelving.
Heavy duty shelving bracketfor use with A2020 standardsand A1400 shelving.
Captive clothing hanger.
Plastic chrome louver.
Magnetic eraser tray.
8”10”12”14”18”20”
17”
9”
12”
2-5/8”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
A2310 Keyboard and mouse not included.
Articulating keyboard traywith pull-out mouse pad.
30”
Copyright 2017 TMI Systems Corporation. All rights reserved.
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
ACCESSORIES 7
A2350
A2320
A2330
A2340
Keyboard not included.
Keyboard drawer.
Mounts under countertopor on top of countertop.
Molded pencil drawer.
Round grommet with2-7/8” opening.
Oval grommet.
22” 16”
21” 16”
3-5/8” 3-5/8”
6” 2-1/2”
3-1/2”
3”
3/4”
3/4”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
A2360
Paper slot grommet
12-1/2”17-1/2”
2-1/4”3/4”
Copyright 2017 TMI Systems Corporation. All rights reserved.
ACCESSORIES 8
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
A2860
Tackboard available as vinylcovered gray or beige, fabriccovered white, gray or beige,or in a natural colored corkplate.
30”36”48”
1”18”24”30”36”
A2416
A2400
A2410
A2415
Tote tray.
Tote tray.
Small dispensing tray withone removable plasticdivider.
Large dispensing tray withtwo removable plasticdividers.
10” 19”
13-3/4” 19”
6-1/4” 9-1/2”
6-1/4” 20-1/8”
3-1/2”
3-1/2”
2-7/8”
2-7/8”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
ACCESSORIES 9
A8600
Expanded metal shelf witha 3/4” x 3/4” x 10 gaugeangle iron frame and 16gauge expanded metalpanel with 1/2” openings.
13-1/8”Min.
13”17”23”28”
3/4”
A7620
Metal webbed stiffener foradditional support atcountertops or shelving.
48”Max.
4”3/4”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
A2960
A7410
Markerboard with erasertray, available in white,gray and beige.
Metal countertop supportleg with mounting plate.
30”36”48”
1”
1-3/4” 1-3/4”
18”24”30”36”
30”34”36”
A7453 TMI recommends 1 support bracket forevery 36” of countertop.
Metal countertop supportbracket with cutouts atthe top to accommodatecleats and wire management.
3” AsReq’d
AsReq’d
Copyright 2017 TMI Systems Corporation. All rights reserved.
ACCESSORIES 10
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
A8610
Metal louvered toe kick plate.
AsReq’d
3-3/4”
A8840
A9616
Plastic wire managementtrough.
Removable kneespace closurepanels with a fixed 6” widecenter panel for supportbracket placement, and fixedtoe base panels.
All panels are finished withVGS laminate surface.
36”42”48”54”60”66”72”
30”34”36”
48” 1-1/4”2-1/2”
A9617 Two A7453 support brackets areincluded.
A9619 One A7453 support brackets is included.
Removable kneespace closurepanels a fixed 6” wide centerpanel for support bracketplacement, and fixed toebase panels.
All panels are finished withVGS laminate surface.
36”42”48”54”60”66”72”
30”34”36”
Removable kneespace closurepanels two fixed 6” widepanels for support bracketplacement, and fixed toebase panels.
All panels are finished withVGS laminate surface.
60”66”72”78”84”90”96”102”
30”34”36”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.
X2000
Square table top with solidparticleboard core, finishedwith HGS laminate on theexposed face, balanced withCLS laminate, and 3mm PVCedging on all four edges.
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
ACCESSORIES 11
X4200
16” 30”36”
15”18”
Bullet geoshape with a2-1/2” high finished black baseand leveling glides.
All surfaces finished withVGS laminate.
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
X2100
X4000
X4100
Square geoshape with 3”radiused corners and a 2-1/2”high finished black basewith leveling glides.
All surfaces finished withVGS laminate.
16”22”28”
16”22”28”
16”22”28”
16”22”28”
15”18”28”
15”18”28”Round geoshape with a
2-1/2” high finished black baseand leveling glides.
All surfaces finished withVGS laminate.
Round table top with solidparticleboard core, finishedwith HGS laminate on theexposed face, balanced withCLS laminate, and 3mm PVCedging.
42”48”
42”48”
1”
42”48”
42”48”
1”
Copyright 2017 TMI Systems Corporation. All rights reserved.
X7000
Double acting swing gate withmounting hardware.
All surfaces finished with VGSlaminate.
Panels are field cut to meetconditions and installed.
Panels are field cut to meetconditions and installed.
FILLERB
FILLERT
Miscellaneous closure panelused to finish base cabinetinstallations.
Miscellaneous closure panelused to finish tall cabinetinstallations.
ACCESSORIES 12
PERSPECTIVE DESCRIPTIONTMI PRODUCT NO. W H D
Panels are field cut to meetconditions and installed.
FILLERW
Miscellaneous closure panelused to finish wall cabinetinstallations.
1”5”11”23”
18”24”30”36”
X4300
Two half round geoshapes with2-1/2” high finished black basesand leveling glides.
All surfaces finished withVGS laminate.
16”22”28”
8”11”14”
15”18”28”
30”33”36”
1-1/4”30”34”36”
1”5”11”23”
1”5”11”23”
30”34”36”
72”84”
A C C E S S O R I E SAll TMI catalog sections are available online at: www.tmisystems.com/products.html
Copyright 2017 TMI Systems Corporation. All rights reserved.