catalog cover page - o.b5z.neto.b5z.net/i/u/10024946/f/selectcatalog.pdfselect products catalog...

800-423-1174 Fax: 800-423-7107 www.select-hinges.com

The warranty that never ends for the hinge that never quits.SM

9770 Shaver Road Portage, MI 49024 Ph: 800-423-1174 Fax: 800-423-7107 www.select-hinges.com

R-9 Full


New construction

High traffi c doors

Wide doors

Extra heavy doors

Retrofi t door repairs

Replace butt/pivot hinges

Extend the life of your entrance

■

■

■

■

■

■

■

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com© 2007 SELECT Products Limited Printed in U.S.A. #CA-081307

SELECT Products Catalog Registration

Name

Company

Address

Phone

Fax

Date catalog received

Number of additional copies needed

For additional catalogs and future product updates,please fi ll out this form and fax it to 800-423-7107.



GE

AR

ED

CO

NT

INU

OU

S H

ING

ES

Concealed

Half Surface

Wide Throw Swing Clear

Full Surface

Toilet Partition

SL27SL11 SL14 SL18 SL24 SL26

SL57SL21

SL54SL53

SL41SL40

SL60/62

GEARED CONTINUOUS HINGES

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com © 2007 SELECT Products Limited Printed in U.S.A. #CA-081307

GE

AR

ED

CO

NT

INU

OU

S H

ING

ES

McKinney

SL11 SD 780-112 FMSLF MCK12 661SL11 HD 780-112HD FMSLFHD MCK12HD 661HD A110HD 112HDSL11 LL 780-112LL A110LLSL18 SD 780-111 FMSLI MCK14SL18 HD 780-111HD FMSLIHD MCK14HD A111HDSL18 LL 780-111LL A111LLSL 14 SD FMCSSL 14 HD FMCSHDSL24 SD 780-224 FM MCK25 662SL24 HD 780-224HD FMHD MCK25HD 662HD A240HD 224HDSL24 LL 780-224LL A240LLSL26 LL A260LLSL27 LL 780-226LL A270LLSL40HD 780-235HD WTFMHD MCKWTHDSL41HD 780-041HD A410HDSL41LL 780-041LL A410LLSL21SD 780-210 FS MCK22 665SL21HD 780-210HD FSHD MCK22HD 665HD A210HD 210HDSL57SD 780-157 FSCP MCK58 664SL57HD 780-157HD FSCPHD MCK58HD 664HD A570HD 157HDSL53HD 780-053HD A530HDSL54HD 780-054HD HSHD MCK54HD 663HD A540HD

SL60SL62

Aluminum GEARED Continuous Hinges

SELECT Roton Pemko(Pemko)

Stanley ABH IVES

COMPETITIVE COMPARISON OF CONTINUOUS HINGE PRODUCT LINES


Co

ncealed

5/16" square edge clearance (min.)

11/32" bevel edge clearance (min.)

11/16" 1/16"

1-29/32"

©S

EL

EC

T P

rodu

cts



1-9/16"1-7/8"

1/8"11/16"

©S

EL

EC

T P

rodu

cts

1/16"



1-9/16"

11/16"

©S

EL

EC

T P

rodu

cts



1-9/16"

11/16"

©S

EL

EC

T P

rodu

cts

SL11 SL14

SL18 SL24



11/16"

1-29/32" 2" Door

©S

EL

EC

T P

rodu

cts

SL27

11/16" 3/32"

2" Door

1-9/16"

1-13/16"



©S

EL

EC

T P

rodu

cts

SL26

Concealed Geared Continuous Hinges


FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

Concealed Geared Continuous Hinges

On conventional hinges, opening and “kickback” energy from closers and automatic operators concentrates on the top butt hinge. This force works against the top hinge, eventually forcing it apart or pulling it from the frame/door.

SELECT continuous hinges unite the door and frame into an integrated, sag-free unit. “Kickback” energy dissipates along the entire length of the door and frame and prevents hinge failure.

Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.

Conventional butt hinges Continuous hinges

Co

ncea

led

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com© 2007 SELECT Products Limited Printed in U.S.A. #HL-081307

All dimensions are measured in inches and [millimeters] from the top of the door to the centerline of the holes and bearings.

Choose location(s) for CTW prep(s) from bearing slot(s) dimensioned. CTW4/5 = 1 location; CTW8/10 = 2 locations; CTW12 = 3 locations.

■

■

FASTENER HOLE & BEARING LOCATIONSConcealed Geared Hinges

For 79" HDModels SL11, SL24 Clear only

38 fasteners / 31 bearings

For 83" SD Models SL11, SL14, SL18, SL24


Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com © 2007 SELECT Products Limited Printed in U.S.A. #HL-081307




■

■

For 83" HDModels SL11, SL14, SL18, SL24


For 83" LLModels SL11, SL18, SL24





■

■


For 83" LL Models SL26, SL27


For 85" SDModels SL11, SL14, SL18, SL24






■

■








■

■


For 85" LLModels SL26, SL27








■

■








■

■


For 95" LLModels SL26, SL27






For 120" HD Models SL11, SL14, SL18, SL24


For 120" LL Models SL11, SL18, SL24




■

■




■

■


For 120" LL Models SL26, SL27


SL11 Concealed Geared Continuous Hinge

SL11

1-3/4" do

ors

Flush mounted

For 1-3/4" doors

■

■



1-9/16"

11/16"©

SE

LE

CT

Prod

ucts


NOTES:

SL11

1-3/

4" d

oo

rs SL11 Concealed Geared Continuous Hinge

Reduce maintenance costs and hassles. Independent lab tests on an FRP door

prove SELECT hinges withstand 25 million cycles — more than 50 years of high-traffi c use. Pair-Matched™ hinge leaves, lifetime lubrication and anodizing after machining deliver the longest life of any continuous hinge.

Tested to last six decades

Because SELECT geared continuous hinges have proven themselves in independent testing, we offer the industry's only

Continuous Warranty. It covers any failure of our aluminum geared continuous hinges — with no expiration date — as long as they are properly installed. Durability and worry-free performance … guaranteed in writing. The warranty that never ends for the hinge that never quits.SM

After brutal testing, the State Department granted a SELECT geared continuous hinge its 60-minute certifi cation — the department's highest level. The hinge defl ected bullets in the Ballistic Resistance Test and withstood sledgehammers,

wedges and other tools in the Forced Entry Test. Approved for use in U.S. embassies overseas.

SELECT ships hinges faster than anyone in the industry. 99.9% of our hinge orders ship in 48 hours; more than half are shipped in only 24 hours. Projects won’t be delayed while waiting weeks for hinges.

Geared to ship in 48 hours

Certifi ed by the U.S. Department of State

Covered by the only Continuous Warranty


Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com© 2007 SELECT Products Limited Printed in U.S.A. #SP-081307

SPECIFICATIONS SL11 Concealed Geared Hinge



1-9/16"

1-9/16"7/16" min.clearance

required forcap rotation

2-9/32"

1-3/4"

11/16"

15/16"

Open 90˚

Open 180˚

MATERIAL: Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.

LENGTHS: 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.

RATINGS: Standard Duty — Tested per BHMA standards for medium frequency applications. For doors 48" wide (max.) weighing up to 200 pounds without frame or door reinforcement. 16 gauge hollow metal minimum or 1/8" aluminum minimum.

Heavy Duty — Tested per BHMA standards for high-frequency or heavy, medium-frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 450 pounds without frame or door reinforcement; up to 600 pounds with the use of Rivnuts in the frame and door.

Lead Lined — Low to medium frequency applications. For door 48" wide (max.) weighing up to 1,000 pounds and most lead lined doors. Rivnuts are recommended in the frame and door on extremely high, extremely heavy or wide doors.

FINISHES: All SL11 hinges are stocked in 204R1 Clear (.4–.7 mil) AA-M12C22A31 and 215 R1 Dark Bronze (.7 mil and thicker) AA-M12C22A44 anodized aluminum. Custom anodized or painted fi nishes are available. Product painted or anodized in the fi eld voids the SELECT hinge warranty.

CLOSERS: Conventional overhead surface, concealed sliding arm overhead or fl oor closers may be used with SELECT hinges. Pivot-type fl oor closers (with a fi xed, confl icting center pivot) must be replaced.

ORDER: Specify length, fi nish and standard-duty (SD), heavy-duty (HD) or heavy-duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.

BHMA CERTIFICATION: SL11HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26.2006 Grade 2. SL11XD geared continuous hinges (available on request) are BHMA certifi ed to BHMA Standard ANSI/BHMA A156.26 2006 Grade 1.

SL11 HINGE SCREW COUNT

HINGE LENGTH& DUTY RATING

DOORSCREWS

FRAMESCREWS

83" SD/HD 19 19

85" SD/HD 19 19

95" SD/HD 21 21

120" SD/HD 23 23

83" LL 26 26

85" LL 26 26

95" LL 30 30

120" LL 34 34

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com © 2007 SELECT Products Limited Printed in U.S.A. #SP-081307


SELECT Hinge PerformanceA SELECT geared continuous hinge has been tested in accordance with ANSI 250.4-1994 test procedure and acceptance criteria for physical endurance for steel doors and hardware and has surpassed 25,000,000 cycles during testing by an independent laboratory. On a door cycling 400,000 times per year, a SELECT hinge will be performing for over 62 years.

SELECT geared continuous hinges are built to handle abuse from high-traffi c applications. They are applied to the surface on the edge of the frame and door. No machining or reinforcement is required.

The revolutionary SELECT geared continuous hinge puts an end to costly and irritating hinge failure problems, the most common cause of entrance failure.

On conventional hinges, opening and "kick-back" energy concentrate on a few inches of fastened reinforcing plate — with the top hinge handling 100% of the force. Pinless SELECT hinges bond the door and frame into an integrated, sag-free unit. "Kick-back" energy dissipates along the entire length of the door and frame. (Compare this to a conventional hinge’s 4-1/2" to 5" at the top of the door and frame).

SELECT geared continuous hinges eliminate the gap between the door and frame, providing a weatherproof, rust-proof, tamper-proof barrier. When the door is closed, there are no accessible screws, bolts or pins.

SELECT geared continuous hinges are tested and listed by Underwriters Laboratories Inc. to standards UL10B, UL1OC (positive pressure) and UBC7.2. Hinges are fi re-rated for up to 1-1/2 hours. A special patented process can be added to increase the fi re rating to THREE hours (NO PINS REQUIRED). Contact SELECT for more information.

■

■

■

■

■

■

CONSISTENT TEMPLATINGHole pattern is identical on both Standard and Heavy Duty models—a SELECT benefi t not all hinge makers offer.

LIFETIME LUBRICATIONEliminates the need for periodic maintenance. Quiet performance. Fights gear cap wear. An exclusive SELECT benefi t.

TEMPLATED HOLE PATTERNSelect hinges line up perfectly, precisely, every time. Makes multiple installations easier and faster. An exclusive SELECT benefi t.

ANODIZED AFTER MACHININGHard, smooth surface delivers superior wear, durability and life, inhibits corrosion. Not all hinge makers follow SELECT’s lead in using this superior manufacturing process.

COATED FASTENERSProvide additional corrosion protection with either self-drilling thread-forming (SDTF) or thread-forming (TF) screws. An exclusive SELECT benefi t.

PATENTED 3-HR. FIRE RATINGAvailable without pins or studs. No extra parts to buy or install, no liability worries. Design innovation approved for positive and negative pressure. An exclusive SELECT benefi t.

PAIR-MATCHED™ HINGE LEAVESManufactured together, machined together and anodized together, making SELECT hinges fi t your doors better and last longer. An exclusive SELECT benefi t.

CUSTOM COLORSMatch any anodized or paint color on the gear cap or the entire hinge and fasteners, including our always in-stock Bone White gear caps.

SELECT Advantages

SL14

1-3/4" do

ors

1/16"



1-9/16"

11/16"©

SE

LE

CT

Prod

ucts



1/6" door inset

For 1-3/4" doors

Narrow frame leaf

Door edge protector

■

■

■

■

SL14

1-3/

4" d

oo

rs

NOTES:Reduce maintenance costs and hassles. Independent lab tests on an FRP door















1/16"

7/16"Min. Clearance Required for Cap Rotation



1-9/16"

1"

11/16"

Open 90˚

Open 180˚

2-3/8"

1-3/4"



RATINGS: Standard Duty — Tested per BHMA standards for medium frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 200 pounds without frame or door reinforcement.




ORDER: Specify length, fi nish and standard-duty (SD), heavy-duty (HD). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.

BHMA CERTIFICATION: SL14HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26.2006 Grade 2.



DOORSCREWS

FRAMESCREWS

83" SD/HD 19 19

85" SD/HD 19 19

95" SD/HD 21 21

120" HD 23 23









■

■

■

■

■

■









SELECT Advantages

SL18

1-3/4" do

ors



1-9/16"1-7/8"

1/8"11/16"©

SE

LE

CT

Prod

ucts



1/8" door inset

For 1-3/4" doors

■

■

SL18

1-3/

4" d

oo

rs


















1-9/16"1-7/8"

1/8"11/16"

Open 90˚

Open 180˚


2-13/32"

1-3/4"

1-3/32"





Lead Lined — Low to medium frequency applications. For door 48" wide (max.) weighing up to 1,000 pounds and most lead lined doors. Rivnuts are recommended in the frame and door on extremely high, extremely heavy or unusually wide doors.




BHMA CERTIFICATION: SL18HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26.2006 Grade 2. SL18XD geared continuous hinges (available on request) are BHMA certifi ed to BHMA Standard ANSI/BHMA A156.26 2006 Grade 1.



DOORSCREWS

FRAMESCREWS

83" SD/HD 19 19

85" SD/HD 19 19

95" SD/HD 21 21

120" SD/HD 23 23

83" LL 26 26

85" LL 26 26

95" LL 30 30

120" LL 34 34









■

■

■

■

■

■









SELECT Advantages

SL24

1-3/4" do

ors



11/16" 1/16"

1-29/32"

©S

EL

EC

T P

rodu

cts



1/16" door inset

For 1-3/4" doors

Door edge protector

■

■

■












SL24

1-3/

4" d

oo

rs


SL24Concealed Geared Continuous Hinge





11/16"

1"

1/16"

1-29/32"

2-3/8"

1-3/4"

Open 90˚

Open 180˚










BHMA CERTIFICATION: SL24HD geared continuous hinges conform to BHMA Standard ANSI/BHMA A156.26.2006 Grade 2. SL24XD geared continuous hinges (available on request) conform to BHMA Standard ANSI/BHMA A156.26 2006 Grade 1.



DOORSCREWS

FRAMESCREWS

83" SD/HD 19 19

85" SD/HD 19 19

95" SD/HD 21 21

120" SD/HD 23 23

83" LL 26 26

85" LL 26 26

95" LL 30 30

120" LL 34 34









■

■

■

■

■

■









SELECT Advantages

SL26

2" do

ors

3/32" door inset

For 2" doors

Narrow frame leaf

■

■

■

11/16" 3/32"

2" Door

1-9/16"

1-13/16"



©S

EL

EC

T P

rodu

cts














SL26

2" d

oo

rs





11/16" 3/32"

2" Door

1-9/16"

2-5/8"

1-13/16"



1-1/16"

Open 90˚

Open 180˚




RATINGS: Lead Lined — Low to medium frequency applications. For door 48" wide (max.) weighing up to 1,000 pounds and most lead lined doors. Rivnuts are recommended in the frame and door on extremely high, extremely heavy or unusually wide doors.

FINISHES: All SL26 hinges are stocked in 204R1 Clear (.4–.7 mil) AA-C12C22A31 and 215 R1 Dark Bronze (.7 mil and thicker) AA-M12C22A44 anodized aluminum. Custom anodized or painted fi nishes are available. Product painted or anodized in the fi eld voids the SELECT hinge warranty.


ORDER: Specify length, fi nish and heavy-duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" LL 25 25

85" LL 25 25

95" LL 29 29

120" LL 33 33









■

■

■

■

■

■









SELECT Advantages

SL27

2" do

ors



11/16"

1-29/32" 2" Door

©S

EL

EC

T P

rodu

cts



Flush mounted

For 2" doors

■

■












SL27

2" d

oo

rs







11/16"

15/16"

1-29/32"

1-9/16"

2-17/32"

2" Door

Open 90˚

Open 180˚




RATINGS: Lead Lined — Low to medium frequency applications. For door 48" wide (max.) weighing up to 1,000 pounds and most lead lined doors. Rivnuts are recommended in the frame and door on extremely high, extremely heavy or unusually wide doors.



ORDER: Specify length, fi nish and heavy-duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" LL 25 25

85" LL 25 25

95" LL 29 29

120" LL 33 33









■

■

■

■

■

■









SELECT Advantages


Wide Throw/Swing Clear Geared Hinges

Wid

e Thro

w / S

wing

Clear



15/16"

1-29/32"

1-25/32"

2-1/4"Req’d for rotation

1/16"

©S

EL

EC

T P

rodu

cts

SL41

SL40Wide Throw

Swing Clear



1-19/32"1-1/8"

1-11/16"©

SE

LE

CT

Prod

ucts


Wid

e T

hro

w /

Sw

ing

Cle

ar

Wide Throw/Swing Clear Geared Hinges





FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com

All dimensions are measured in inches and [millimeters] from the top of the door to the centerline of the holes and bearings. ■

© 2007 SELECT Products Limited Printed in U.S.A. #HL-081307

FASTENER HOLE LOCATIONSWide Throw Geared Hinges

For 95" HDModel SL40 Wide Throw


For 83" HDModel SL40 Wide Throw


SL40 Wide Throw Geared Continuous Hinge

SL40

1-3/4" do

ors

Provides clearance past brick moldings

For 1-3/4" doors

■

■



1-19/32"1-1/8"

1-11/16"

©S

EL

EC

T P

rodu

cts


NOTES:

SL40

1-3/

4" d

oo

rs SL40 Wide Throw Geared Continuous Hinge














SPECIFICATIONS SL40 Wide Throw Geared Hinge



1-19/32"

1-11/16"

15/16"

3-5/32"

1-3/4"

1-11/16"

7/16"min. clearance

required for cap rotation

Open 90˚

1/4"

2-3/4"

15/16"

Open 180˚


LENGTHS: 83"and 95" lengths standard for nominal door heights. Custom lengths are available.

RATINGS: Heavy Duty — Tested per BHMA standards for high-frequency or heavy, medium-frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 450 pounds without frame or door reinforcement; up to 600 pounds with the use of Rivnuts in the frame and door.



ORDER: Specify length, fi nish and heavy-duty (HD). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" HD 19 19

95" HD 20 20


SPECIFICATIONS SL40 Wide Throw Geared Hinge







■

■

■

■

■

■









SELECT Advantages

SL41

1-3/4" do

ors



15/16"

1-29/32"

1-25/32"


1/16"

©S

EL

EC

T P

rodu

cts


SL41 Swing Clear Geared Continuous Hinge

1/6" door inset

For 1-3/4" doors

■

■

SL41

1-3/

4" d

oo

rs













SL41 Swing Clear Geared Continuous Hinge


SPECIFICATIONS SL41 Swing Clear Geared Hinge



15/16"

1-29/32"

1-25/32"


1/16"

1-1/8"Open 180˚

2-1/4"Clearance required

for cap rotation (min.)

1-1/2"Frame face formounting (min.)

27/32"

Open 90˚



RATINGS: Heavy Duty — Tested per BHMA standards for high-frequency or heavy, medium-frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 450 pounds without frame or door reinforcement; up to 600 pounds with the use of Rivnuts in the frame and door.




ORDER: Specify length, fi nish and heavy-duty (HD) or heavy-duty with additional fastener holes (LL). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" HD 19 25

85" HD 19 25

95" HD 21 27

120" HD 23 29

83" LL 26 32

85" LL 26 32

95" LL 30 36

120" LL 34 40


SPECIFICATIONS SL41 Swing Clear Geared Hinge







■

■

■

■

■

■









SELECT Advantages


Half Surface Geared Continuous Hinges

3/32"

3/16"

1-9/16"

1-3/16"

1-1/16"

1-7/8"

7/16"11/16"

©S

EL

EC

T P

rodu

cts

SL53

3/32"

3/16"

1-29/32"

1-3/16"

1-1/16"

1-7/8"

7/16"11/16"

©S

EL

EC

T P

rodu

cts

SL54

Half S

urface


Hal

f S

urfa

ce

Half Surface Geared Continuous Hinges





FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT


All dimensions are measured in inches and [millimeters] from the top of the door to the centerline of the holes.

Dimensions shown inside boxes are locator screw mounting holes.

■

■


FASTENER HOLE LOCATIONSHalf Surface Geared Hinges

For 83" HDModels SL53, SL54





FASTENER HOLE LOCATIONSHalf Surface Geared Hinges

All dimensions are measured in inches and [millimeters] from the top of the door to the centerline of the holes.

Dimensions shown inside boxes are locator screw mounting holes.

■

■





SL53 Half Surface Geared Continuous Hinge

SL53

1-3/4" do

ors

3/32" door inset

Narrow frame leaf

For 1-3/4" doors

Long barrel nuts (up to 2-1/4" max.) available for thicker doors

■

■

■

■


3/32"

3/16"

1-9/16"

1-3/16"

1-1/16"

1-7/8"

7/16"11/16"

©S

EL

EC

T P

rodu

cts

NOTES:

SL53

1-3/

4" d

oo

rs SL53 Half Surface Geared Continuous Hinge














SPECIFICATIONS SL53 Half Surface Geared Hinge

3/32"

3/16"

1-9/16"

1-3/16"

1-1/16"

1-7/8"

7/16"11/16"

5/8"Open 180˚

2-3/8"

Open 90˚

1-3/4"

7/16"Clearance required




RATINGS: Heavy Duty — Tested per BHMA standards for high-frequency or heavy, medium-frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 450 pounds without frame or door reinforcement; up to 600 pounds with the use of Rivnuts in the frame.

FINISHES: All SL53 hinges are stocked in 204R1 Clear (.4–.7 mil) AA-M12C22A31 and .215 R1 Dark Bronze (.7 mil and thicker) AA-M12C22A44 anodized aluminum. Custom anodized or painted fi nishes are available. Product painted or anodized in the fi eld voids the SELECT hinge warranty.


ORDER: Specify length, fi nish and heavy-duty (HD). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws, 1/4-20 through-bolts and 1/4-20 shoulder screws (for doors up to 1-3/4" thick) are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" HD 10 19

85" HD 10 19

95" HD 11 21

120" HD 14 23









■

■

■

■

■

■









SELECT Advantages

SL54

1-3/4" do

ors

3/32"

3/16"

1-29/32"

1-3/16"

1-1/16"

1-7/8"

7/16"11/16"

©S

EL

EC

T P

rodu

cts



3/32" door inset

Full frame leaf

For 1-3/4" doors


■

■

■

■

SL54

1-3/

4" d

oo

rs
















3/32"

3/16"

1-29/32"

1-3/16"

1-1/16"

1-7/8"

7/16"11/16"

5/8" Open 180˚

2-3/8"

Open 90˚

1-3/4"

7/16"Clearance required




RATINGS: Heavy Duty — Tested per BHMA standards for high-frequency or heavy, medium-frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 450 pounds without frame or door reinforcement; up to 600 pounds with the use of Rivnuts in the frame.



ORDER: Specify length, fi nish and heavy-duty (HD). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws, 1/4-20 through-bolts and 1/4-20 shoulder screws (for doors up to 1-3/4" thick) are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" HD 10 19

85" HD 10 19

95" HD 11 21

120" HD 14 23









■

■

■

■

■

■









SELECT Advantages


Full Surface Geared Continuous Hinges

1/32"

15/32"15/16"

1-9/32"

3-1/16"

1/16"

1-5/8"

©SELECT Products

SL21

1-1/16"

1/16"

3/4"

7/8" min. "

7/16"

25/32"

19/32"

3-3/16"

1-7/16"©SELECT Products

SL57

1/16 Full Surface


Full

Sur

face

Full Surface Geared Continuous Hinges





FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT


All dimensions are measured in inches and [millimeters] from the top of the door to the centerline of the holes. Dimensions shown inside boxes are locator screw mounting holes.

■

■

FASTENER HOLE LOCATIONSFull Surface Geared Hinges

For 83" SD & HDModels SL21, SL57

24 fasteners / SD:16 bearings / HD:32 bearings




FASTENER HOLE LOCATIONSFull Surface Geared Hinges

All dimensions are measured in inches and [millimeters] from the top of the door to the centerline of the holes. Dimensions shown inside boxes are locator screw mounting holes.

■

■





SL21 Full Surface Geared Continuous Hinge

SL21

1-3/4" do

ors

1/32" door inset

Swing clear design

For 1-3/4" doors


■

■

■

■

1/32"

15/32"15/16"

1-9/32"

3-1/16"

1/16"

1-5/8"

©SELECT Products


NOTES:

SL21

1-3/

4" d

oo

rs SL21Full Surface Geared Continuous Hinge













Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com© 2007 SELECT Products Limitted Printed in U.S.A. #SP-081307

SPECIFICATIONS SL21 Full Surface Geared Hinge

1-9/32"

3-1/16"

1/16"

1-5/8"

Open 90˚

Open 110˚

Open 180˚


1-1/32"

1-3/4"

1-5/32"

9/16"




Heavy Duty — Tested per BHMA standards for high-frequency or heavy, medium-frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 450 pounds without frame or door reinforcement; up to 600 pounds with the use of Rivnuts in the frame.



ORDER: Specify length, fi nish and standard-duty (SD), heavy-duty (HD). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws, 1/4-20 through-bolts and 1/4-20 shoulder screws (for doors up to 1-3/4" thick) are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" SD/HD 10 14

85" SD/HD 10 14

95" SD/HD 11 15

120" SD/HD 14 18









■

■

■

■

■

■









SELECT Advantages

SL57

1-3/4" do

ors

1-1/16"

1/16"

3/4"

7/8" min. "

7/16"

25/32"

19/32"

3-3/16"

1-7/16"©SELECT Products

1/16



1/16" door inset

Narrow frame leaf

For 1-3/4" doors


■

■

■

■

SL57

1-3/

4" d

oo

rs
















1-1/16"

1/16"

7/8" min.

25/32"

3-3/16"

2-1/4"

1-3/4"

Open 90˚

Open 180˚11/16"

1-1/16"



RATINGS: Standard Duty — Tested per BHMA standards for medium frequency applications. For doors 48" wide (max.) weighing up to 200 pounds without frame or door reinforcement. 16 gauge hollow metal minimum or 1/8" aluminum minimum.

Heavy Duty — Tested per BHMA standards for high-frequency or heavy, medium-frequency applications. For doors 48" wide (max.) in 16 gauge hollow metal (min.) or 1/8" aluminum (min.) weighing up to 450 pounds without frame or door reinforcement; up to 600 pounds with the use of Rivnuts in the frame.



ORDER: Specify length, fi nish and standard-duty (SD), heavy-duty (HD). Also, specify door and frame screw applications. 12-24 x 1/2" thread-forming 410SS Phillips undercut fl athead screws, 1/4-20 through-bolts and 1/4-20 shoulder screws (for doors up to 1-3/4" thick) are provided as a standard pack unless otherwise specifi ed. Wood and self-drilling, thread-forming screws also available. Security screws optional at extra cost.



DOORSCREWS

FRAMESCREWS

83" SD/HD 10 14

85" SD/HD 10 14

95" SD/HD 11 15

120" SD/HD 14 18









■

■

■

■

■

■









SELECT Advantages


Toilet P

artition

Toilet Partition Geared Continuous Hinges

3-7/16"

1/16"

1-3/16"

1-1/16"

25/32"7/16"

1-3/16"

1-1/16"

©SELECT Products

SL60/62


Toile

t P

arti

tio

n

Toilet Partition Geared Continuous Hinges





FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT


All dimensions are measured in inches and [millimeters] from the top of the door to the centerline of the holes. Minimum hinge length for two spring bearings on SL62 = 43-1/2".

■

■


FASTENER HOLE LOCATIONSToilet Partition Geared Hinges

57" SDModel SL60:

10 fasteners11 bearings

Model SL62:

10 fasteners9 single bearings 2 spring bearings

SL60/62 Toilet Partition Geared Continuous Hinge

SL60/6

2

For 3/4", 1" and 1-1/4" partitions

One-way fasteners

■

■

3-7/16"

1/16"

1-3/16"

1-1/16"

25/32"7/16"

1-3/16"

1-1/16"

©SELECT Products


NOTES:

SL60/6

2 SL60/62 Toilet Partition Geared Continuous Hinge














SPECIFICATIONS SL60/SL62 Toilet Partition Geared Hinge

3-7/16"

1/16"

1-3/16"

1-1/16"

25/32"7/16"

1-3/16"

1-1/16"

Open 90˚

1-3/4" 1-9/16"

SL62 opens 120˚

SL60 opens 180˚1-1/8"


LENGTHS: 57" length standard for nominal door heights. Custom lengths are available.

RATINGS: For high frequency partition doors weighing up to 100 pounds without frame or door reinforcement.

FINISHES: All SL60/62 hinges are stocked in 204R1 Clear (.4–.7 mil) AA-M12C22A31 anodized aluminum. Custom anodized or painted fi nishes are available. Product painted or anodized in the fi eld voids the SELECT hinge warranty.

FASTENERS: Fasteners available for 3/4", 1" and 1-1/4" partitions. The SL60 and SL62 are supplied with one-way, slotted, chrome-fi nished 10-24 fasteners and a 5/64" hex key to install the door leaf and pilaster leaf covers.

SL60/SL62 HINGE SCREW COUNT


DOORSCREWS

FRAMESCREWS

57" 5 5


SPECIFICATIONS SL60/SL62 Toilet Partition Geared Hinge

SELECT Hinge PerformanceSELECT geared continuous hinges are built to handle abuse from high-traffi c applications. They are applied to the surface on the edge of the frame and door. No machining or reinforcement is required.




■

■

■

■








SELECT Advantages


PIN

& B

AR

RE

L C

ON

TIN

UO

US

HIN

GE

S

SL200 SL300 SL305

Concealed

Half Mortise

Swing Clear

Edge Guard

SL310 SL311

SL303 SL306

Full Surface

SL302 SL309

Toilet Partition

SL402

SL308

Half Surface

PIN & BARREL CONTINUOUS HINGES


PIN

& B

AR

RE

L C

ON

TIN

UO

US

HIN

GE

S

SELECT Markar Hager McKinney Stanley ABH IVES

SL300 FM-300 790-900 MCK FM300 651 A500 700SL302 FS-302 MCK FS302 657 A502 702SL303 HS-303 790-903 A503SL305 HG-305 790-905 MCK HG305 652 A505 705SL306 HG-306 790-906 MCK HG306 655 A506SL308 EG-308 EG341 A538SL309 FS/SC-309 790-909SL310 HG-310SL311 HG-311 MCK HG311 656 A511 711SL402 FS-402-TPSL200 FM-200 FM3700 641 600

PIN & BARREL Continuous Hinges

COMPETITIVE COMPARISON OF CONTINUOUS HINGE PRODUCT LINES


Co

ncealed

SL200

1/8"

1/16"

1-7/8"

2-1/4"

3/8"7/8"



©S

EL

EC

T P

rodu

cts

3/8" clearance (min.)

3/8" 3/8"

3/16"

2-1/4"

1-7/8"

3/4"

©S

EL

EC

T P

rodu

cts

SL305

5/16" bevel edgeclearance (min.)


1/8"

1/16"

3/8"

2-1/4"

1-7/8"

©S

EL

EC

T P

rodu

cts

SL300

Concealed Pin & Barrel Continuous Hinges


FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICKBACK

FORCE OFKICKBACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

Concealed Pin & Barrel Continuous Hinges




Co

ncea

led

SL200 Concealed Pin & Barrel Continuous Hinge

SL200



1/8"

1/16"

3/8"

2-1/4"

1-7/8"

©S

EL

EC

T P

rodu

cts


Primer painted carbon steel

1/8" door inset

For doors weighing up to 600 lb.

48" maximum door width

■

■

■

■

SL200 SL200

Concealed Pin & Barrel Continuous Hinge

NOTES:SELECT ships hinges faster than anyone in the industry. 99.9% of our hinge orders ship in 48 hours; more than half are shipped in only 24 hours. Projects won’t be delayed while waiting weeks for hinges.




SPECIFICATIONS SL200 Concealed Pin & Barrel Hinge


2-3/8"


Door open 90˚

Door open 180˚

1/8"

1/16"

7/8"

3/8"

2-1/4"

1-7/8"

MATERIAL: 14 gauge 1012 cold-rolled steel with .25" diameter 304 stainless pin. Long-life nylon split bearings.


RATINGS: For doors 48" wide (max.) weighing up to 600 pounds without frame or door reinforcement.

FINISH: Gray powder coat primer.


ORDER: Specify hinge length. Universal screw pack contains10-24 x 7/8" self-drilling zinc plated 410SS screws and 10 x 1-1/4" Phillips fl athead undercut sheet metal screws.

BHMA CERTIFICATION: SL200 pin & barrel continuous hinges conform to BHMA Standard ANSI/BHMA A156.26.2006 Grade 2.


HINGE LENGTH DOORSCREWS

FRAMESCREWS

83" 21 21

85" 18 18

95" 23 23

120" 27 27



VARIETY OF FINISHESAvailable in scratch-resistant and Kynar® painted fi nishes to match, contrast or accent your building’s design.

NYLON DOUBLE BEARINGSCreate a strong, free-moving assembly that allows closers and other door hardware to function properly.

1/4-IN. STAINLESS STEEL RODDelivers high tensile strength by forming a strong, free-moving unit. Flexible and strong in abused openings.

TEMPLATED HOLE PATTERNSelect hinges line up perfectly, precisely, every time. Makes installation easier and faster.

3-HR. FIRE RATINGFire-rated out of the package. No extra parts to buy or install, no liability worries.

GRAY POWDER COAT PRIMER CARBON STEELCarbon steel hinge with stainless steel pin creates a tough, highly secure opening.

SELECT Advantages

ADJUSTA-SCREW™ FASTENERSRemedy out-of-square doors and frames easily. Correct fi t variances up to 3/8" along full length of door.

END CAPSSpiral-knurled steel caps seal the barrel ends to contain hinge rod.

SELECT pin & barrel continuous hinges are tested and listed by Underwriters Laboratories Inc. to standards UL10B, UL1OC (positive pressure) and UBC7.2.

■

SL300

1/8"

1/16"

1-7/8"

2-1/4"

3/8"7/8"



©S

EL

EC

T P

rodu

cts



Stainless steel

1/8" door inset



■

■

■

■

SL300







1/8"

1/16"

1-7/8"

2-1/4"

3/8"



1/8"

1/16"

1-7/8"

2-1/4"

3/8"



7/8"7/8"

2-3/8"

Door open 90˚

Door open 180˚

MATERIAL: 14 gauge 304 stainless steel with .25" diameter 304 stainless pin. Long-life nylon split bearings.



FINISH: US32D satin stainless steel (630).


ORDER: Specify hinge length. Universal screw pack contains 10-24 x 7/8" self-drilling 410SS Phillips undercut fl athead screws and 10 x 1-1/4" sheet metal screws.




FRAMESCREWS

83" 21 21

85" 18 18

95" 23 23

120" 27 27



VARIETY OF FINISHESAvailable in polished, brushed and painted fi nishes to match, contrast or accent your building’s design.






CORROSION-RESISTANT STAINLESS STEELStainless steel pin & barrel construction creates a tough, highly secure opening.


SELECT AdvantagesSELECT pin & barrel continuous hinges are tested and listed by Underwriters Laboratories Inc. to standards UL10B, UL1OC (positive pressure) and UBC7.2.

■


SL305


3/8" 3/8"

3/16"

2-1/4"

1-7/8"

3/4"

©S

EL

EC

T P

rodu

cts


Stainless steel

Door guard



Adjusta-Screws™ included

Specify if for metal door

■

■

■

■

■

■




SL305





3/8"

11/16"

3/8"

3/16"

2-1/4"

1-7/8"

2-3/8"

Door open 90˚

Door open 180˚






ORDER: Specify hinge length. Universal screw pack contains 10-24 x 7/8" self-drilling 410SS Phillips undercut fl athead screws, 10 x 1-1/4" Phillips undercut fl athead sheet metal screws, 10-24 x 3/4" Phillips undercut fl athead machine screws and right-hand Adjust-Screws™ for wood doors. Specify left-hand Adjusta-Screws™ for metal doors.




FRAMESCREWS

83" 21 21

85" 18 18

95" 23 23

120" 27 27












■


Swing Clear Pin & Barrel Continuous Hinges

Sw

ing C

lear

SL310


1-3/8"

1-9/16"

1/4"

1/8"

1/32"3/4"

©S

EL

EC

T P

rodu

cts


1/8"

1-3/8"

3/4"

3/4"

1-9/16"

1/4"

©S

EL

EC

T P

rodu

cts

SL311


Sw

ing

Cle

ar

Swing Clear Pin & Barrel Continuous Hinges

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT




SL310 Swing Clear Pin & Barrel Continuous Hinge

SL310


1-3/8"

1-9/16"

1/4"

1/8"

1/32"3/4"

©S

EL

EC

T P

rodu

cts


Stainless steel

Adjust-Screws™ included

Specify if for metal door

For doors weighing up to 600 lbs.

48" max. door width

■

■

■

■

■

SL310 SL310

Swing Clear Pin & Barrel Continuous Hinge





SPECIFICATIONS SL310 Swing Clear Pin & Barrel Hinge

© 2007 SELECT Products Limited Printed in U.S.A. #SP-081307


1-3/8"

1-9/16"

1/4"

1/8"

1/32"3/4"

Door open 90˚

3/4"

MATERIAL: 14 gauge 304 stainless steel barrel with .25" diameter 304 stainless pin. Long-life nylon split bearings.





ORDER: Specify hinge length. Universal screw pack contains 10-24 x 7/8" self-drilling 410SS Phillips undercut fl athead screws, 10 x 1-1/4" Phillips undercut fl athead sheet metal screws, 10-24 x 3/4" Phillips undercut fl athead machine screws and right-hand Adjust-Screws™ for wood doors. Specify left-hand Adjusta-Screws™ for metal doors.




FRAMESCREWS

83" 21 21

85" 18 18

95" 23 23

120" 27 27













■

SL311


1/8"

1-3/8"

3/4"

3/4"

1-9/16"

1/4"

©S

EL

EC

T P

rodu

cts



Stainless steel


48" max. door width

■

■

■

SL311









1/8"

1-3/8"

3/4"

1-9/16"

1/4"

Door open 90˚

3/4"






ORDER: Specify hinge length. Universal screw pack contains 10-24 x 7/8" self-drilling 410SS Phillips undercut fl athead screws and 10 x 1-1/4" Phillips undercut fl athead sheet metal screws.




FRAMESCREWS

83" 21 21

85" 18 18

95" 23 23

120" 27 27













■


Half Surface/Half Mortise Pin & Barrel Hinges

SL3031/8"

3/8" 7/16"


1-11/16"

1-7/8"

©SELECT Products


3/4"

1-11/16"

7/16"

3/16"

2-1/4"

©SELECT Products

SL306Half Mortise

Half Surface

Half S

urface / Half M

ortise


Hal

f S

urfa

ce /

Hal

f M

ort

ise

Half Surface/Half Mortise Pin & Barrel Hinges

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT




SL303 Half Surface Pin & Barrel Continuous Hinge

SL303

1/8"

3/8" 7/16"


1-11/16"

1-7/8"

©SELECT Products


Stainless steel


48" max. door width

Brushed aluminum leaf cover

■

■

■

■

SL303 SL303

Half Surface Pin & Barrel Continuous Hinge





SPECIFICATIONS SL303 Half Surface Pin & Barrel Hinge

1/8"

3/8" 7/16"


2-3/8"

1-11/16"

1-7/8"






ORDER: Specify hinge ength. Universal screw pack contains 10-24 x 7/8" self-drilling 410SS Phillips undercut fl athead screws, 10 x 1-1/4" Phillips undercut fl athead sheet metal screws and 1/4-20 x 3/4" self-drilling Torx panhead screws.




FRAMESCREWS

83" 14 21

85" 14 18

95" 16 23

120" 20 27


SPECIFICATIONS SL303 Half Surface Pin & Barrel Hinge










■

SL306


3/4"

1-11/16"

7/16"

3/16"

2-1/4"

©SELECT Products


SL306 Half Mortise Pin & Barrel Continuous Hinge

Stainless steel


48" max. door width


■

■

■

■

SL306




SL306 Half Mortise Pin & Barrel Continuous Hinge


SPECIFICATIONS SL306 Half Mortise Pin & Barrel Hinge


3/4"

1-11/16"

7/16"

3/16"

Door open 90˚

2-1/4






ORDER: Specify hinge length. Universal screw pack contains 10-24 x 7/8" self-drilling 410SS Phillips undercut fl athead screws, 10 x 1-1/4" Phillips undercut fl athead sheet metal screws and 1/4-20 x 3/4" self-drilling Torx panhead screws.




FRAMESCREWS

83" 21 14

85" 18 14

95" 23 16

120" 27 20


SPECIFICATIONS SL306 Half Mortise Pin & Barrel Hinge










■


Full Surface Pin & Barrel Continuous Hinges

SL302

SL309


7/16"

1-3/4" 1-3/4"

©SELECT Products

1/8"

7/16"3-3/8"

1/4"


©SELECT Products

1-7/16"1-9/16"

Full Surface


Full

Sur

face

Full Surface Pin & Barrel Continuous Hinges

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT




SL302 Full Surface Pin & Barrel Continuous Hinge

SL302


7/16"

1-3/4" 1-3/4"

©SELECT Products


Stainless steel


48" max. door width

Brushed aluminum leaf covers

■

■

■

■

SL302 SL302

Full Surface Pin & Barrel Continuous Hinge





SPECIFICATIONS SL302 Full Surface Pin & Barrel Hinge


7/16"

1-3/4" 1-3/4"

2-1/4"

Door open 90˚






ORDER: Specify hinge length. 1/4-20 x 3/4" zinc plated steel Torx panhead Tek screws are provided as a standard pack.




FRAMESCREWS

83" 14 14

85" 14 14

95" 16 16

120" 20 20












■

SL309








1/8"

7/16"3-3/8"

1/4"


1-7/16"1-9/16"

Door open 90˚

5/8"






ORDER: Specify hinge length. Universal screw pack contains 10-24 x 7/8" self-drilling 410SS Phillips undercut fl athead screws, 10 x 1-1/4" Phillips undercut fl athead sheet metal screws and 1/4-20 x 3/4" self-drilling Torx panhead screws.




FRAMESCREWS

83" 14 21

85" 14 18

95" 16 23

120" 20 27













■


Toilet P

artition

Toilet Partition Pin & Barrel Continuous Hinges

SL402


7/16" 7/16"

1-5/8" 1-5/8"

1/16"

©SELECT Products





Toile

t P

arti

tio

n

Toilet Partition Pin & Barrel Continuous Hinges

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

FORCE OFKICK-BACK

FORCE OFKICK-BACK

FORCE OFDOOR WEIGHT

FORCE OFDOOR WEIGHT

SL402 Toilet Partition Pin & Barrel Continuous Hinge

SL402

Bright dip anodized aluminum

Spring-loaded

Max. door weight 80 lb.

Safety lift feature available

■

■

■

■


7/16" 7/16"

1-5/8" 1-5/8"

1/16"

©SELECT Products


NOTES:

SL402 SL402

Toilet Partition Pin & Barrel Continuous Hinge





SPECIFICATIONS SL402 Toilet Partition Pin & Barrel Hinge



Door open 90˚

7/16" 7/16"

1-5/8" 1-5/8"

1-1/2"

1/16"

MATERIAL: 6463-T5 aluminum with .25" diameter 304 stainless pin and stainless steel spring mechanism. Long-life nylon split bearings.

LENGTHS: 54" and 57" lengths standard for nominal door heights. Custom lengths are available.


FINISH: Bright dipped anodized.

ORDER: Specify if safety lift feature is required. Special lengths available: 24" minimum; 72" maximum. #14 x 3/4" Torx button head sheet metal screws are provided as a standard pack. One-way shoulder screws optional at extra cost.



FRAMESCREWS

54" 6 6

57" 6 6


SPECIFICATIONS SL402 Toilet Partition Pin & Barrel Hinge










■


Edge Guard for Pin & Barrel Continuous Hinges

Ed

ge

Gua

rd

NOTES:

SL308

1-3/

4" d

oo

rs SL308 Edge Guard for Pin & Barrel Continuous Hinge





SPECIFICATIONS SL308 Continuous Edge Guard

1/8"

3/4"

1-3/4"


MATERIAL: 16 gauge 304 stainless steel.



ORDER: Specify edge guard length. #10 x 1-1/4" Phillips fl athead undercut 304SS sheet metal screws are provided as a standard pack. Adjust-Screws™ optional at extra cost. Specify wood or metal door.

SL308 EDGE GUARD SCREW COUNT

HINGE LENGTH DOOR SCREWS

83" 7

85" 7

95" 8

120" 10


SPECIFICATIONS SL308 Continuous Edge Guard





SELECT Advantages


ELE

CT

RIC

PR

EP

MO

DIF

ICAT

ION

S

ELECTRIC PREP MODIFICATIONS


Geared

Electric P

reps

Geared Hinge Electric Preps


Gea

red

Ele

ctri

c P

rep

s

Geared Hinge Electric Preps

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com© 2007 SELECT Products Limited Printed in U.S.A. #EP-081307

GEARED HINGE ELECTRIC PREPS

Specify dimensions

CUTOUTCENTERLINE

9/16"Diameter

HINGELENGTH

HANDING (FROM KEYED SIDE):Right hand

Right hand reverse

o

o

Left hand

Left hand reverse

o

o

EPT Specifi cation Template

CUTOUT LOCATION:Door leafo Frame leafo

HINGE MODEL:

POWER TRANSFER SELECTION:Adams Rite 4612-1

Securitron EPT

Yale EPT

RCI 9512

Dorma ES105

ooooo

Adams Rite 4612-2

Securitron EPTL

Yale EPTL

RCI 9513

Precision EPT-5

ooooo

CUTOUT SHAPE (MATCH EPT MOUNTING FLANGE):Round endo Square endo

Please fi ll out this form and fax it to

SELECT Products Limited800-423-7107

COMPANY:

APPROVED BY:

DATE:

DOOR MARKINGS:

P.O. NUMBER:



9-1/8"

EPT (Electric Power Transfer)

PREPS: SELECT geared continuous hinges can be prepared for the Von Duprin EPT2 and EPT10 power transfer unit and the Von Duprin PNT1 pneumatic transfer unit; others available upon request. Contact factory for quotes and availability on preparations for power transfer units.

LOCATION: Specify the dimension from the top of the hinge to the centerline of the cutout. (Cutout length is 9-1/8"; centerline of the cutout is 4-9/16" from the top edge of cutout.) Hinge is installed fl ush with the top of the door.

HANDING: Specify the handing of each door requiring the EPT. Handing not required on SL11 and SL27.

ORDER: Use suffi x “EPT” or “PNT” plus the location (and handing if required). Example: SL24 HD 83" Clear EPT 41" from top of hinge to centerline, RH.

AVAILABILITY: Available on geared hinge models SL11, SL14, SL18, SL24, SL26, SL27, SL53 and SL54.

LEAD TIME: 48 hours (on most orders).

IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for EPT before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.

Ph: 800-423-1174 | Fax: 800-423-7107 | www.select-hinges.com © 2007 SELECT Products Limited Printed in U.S.A. #EP-081307


PREPS: SELECT geared continuous hinges can be prepared for exposed contacts to provide non-continuous current. 50V AC/DC at 1 amp.

LOCATION: Specify the dimension from the top of the hinge to contacts. Avoid putting contacts within one inch of a fastener hole. Hinge is installed fl ush with the top of the door.

HANDING: Specify the handing of each door requiring the EC. Handing not required on SL11, SL27 and SL40.

ORDER: Use suffi x “EC” plus the number of contacts required (and handing if required). Minimum two contacts, maximum four contacts. Example: SL24 HD 83" Clear EC2 36" from top of hinge, RH.



WARRANTY: 1 year on electrical components.

IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for EC before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.

EC (Exposed Contacts)


EMS (Exposed Monitor Switch)

PREPS: SELECT geared continuous hinges can be prepared for an exposed monitor switch to provide non-continuous current. 48V DC at 250MA 30W maximum.

LOCATION: Specify the dimension from the top of the hinge to contacts. Avoid putting switch within one inch of a fastener hole. Hinge is installed fl ush with the top of the door.

HANDING: Specify the handing of each door requiring the EMS.

ORDER: Use suffi x “EMS” plus the location of the switch (and handing if required). Only one switch required.Example: SL24 HD 83" Clear EMS 36" from top of hinge, RH.




IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for EMS before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.



CTW (Concealed Through-Wire)GEARED HINGE ELECTRIC PREPS

PREPS: SELECT geared continuous hinges can be prepared for concealed electric through-wires to provide continuous current. Through-wires available in sets of 4, 5, 8 or 10 (12-wire sets available upon engineering approval). 22 gauge wire with 8" leads (approx). 120V AC/DC at 3-6 amps per conductor.

NOTE: CTW4 and CTW5 preps require the replacement of one hinge bearing with a special bearing containing wires; CTW8 and CTW10 preps require the replacement of two bearings; CTW12 prep requires the replacement of three bearings.

LOCATION: Specify the dimension from the top of the hinge to CTW centerline. Hinge is installed fl ush with the top of the door. Refer to the “Fastener Hole and Bearing Locations” in the Concealed hinge section to choose bearing location(s).

HANDING: Specify the handing of each door requiring the CTW. Handing not required on SL11 and SL27.

ORDER: Use suffi x “CTW” plus the number of wires required. Indicate location of the CTW (and handing if required). Example: SL24 HD 83" Clear CTW4 42-25/32" from top of hinge, RH.

AVAILABILITY: Available on geared hinge models SL11, SL14, SL18, SL24, SL26, and SL27.

LEAD TIME: 48 Hours (on most orders).


IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for CTW before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.


CMG (Concealed Adjustable Magnetic Monitor Switch)

PREPS: SELECT geared continuous hinges can be prepared for a concealed magnetic monitor switch to provide non-continuous current. 22 gauge wire with 12" leads (approx). 30V DC. Maximum current 100A, maximum contact rating 20W.

LOCATION: Using template provided, specify the dimension from the top of the hinge to switch. Avoid putting switch within one inch of a fastener hole. Hinge is installed fl ush with the top of the door.

HANDING: Specify the handing of each door requiring the CMG.

ORDER: Use suffi x “CMG” plus the location of the switch (and handing if required). Only one switch required. Example: SL24 HD 83" Clear CMG 36" from top of hinge, RH.




IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for CMG before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.



RP (Removable Panel)GEARED HINGE ELECTRIC PREPS

PREPS: SELECT geared continuous hinges can be prepared with removable hinge leaf panels to allow easy access to electrical components.

LOCATION: Dimensions will differ depending on the hinge model and electrical components requested. A template requiring customer's approval will be designed by a SELECT engineer based on the customer's order. Hinges are installed fl ush with the top of the door.

HANDING: Specify the handing of each door requiring the RP.

ORDER: Use suffi x “RP” (Removable Panel), plus handing. Example: SL24 HD 83" Clear CTW4 42-25/32" from top of hinge to centerline, RP, RH.

AVAILABILITY: Available on geared hinge models SL11, SL14, SL18, SL24, SL26, SL27.


IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for RP before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.



PREPS: SELECT geared continuous hinges can be prepared with hinge leaf panels to allow easy access to electrical components.

LOCATION: Dimensions will differ depending on the hinge model and electrical components requested. A template requiring customer's approval will be designed by a SELECT engineer based on the customer's order. Hinges are installed fl ush with the top of the door.

HANDING: Specify the handing of each door requiring the AP.

ORDER: Use suffi x “AP” (Access Panel), plus handing. Example: SL24 HD 83" Clear CTW4 42-25/32" from top of hinge to centerline, AP, RH.

AVAILABILITY: Available on geared hinge models SL11, SL14, SL18, SL24, SL26, SL27.


IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for AP before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.

AP (Access Panel)


Pin &

Barrel E

lectric Prep

s

Pin & Barrel Hinge Electric Preps


Pin

& B

arre

l Ele

ctri

c P

rep

s

Pin & Barrel Hinge Electric Preps


PIN & BARREL HINGE ELECTRIC PREPS ETAP (Electrical Transfer Access Prep)

PREPS: SELECT pin & barrel continuous hinges can be prepared for the CE, AMS and ES modifi cations that allow easy, one-person access to wiring between hinge and door. (CE is shown.)

LOCATION: Panel is approximately 16" in length. Panel location depends on the electrical prep modifi cation being installed.

HANDING: Specify the handing of each door requiring the ETAP.

ORDER: Use suffi x “ETAP” plus the location and handing. Example: SL300 83 SS, CE-4D@40-11/16", LH ETAP.

AVAILABILITY: Available on pin & barrel hinge models SL200, SL300, SL305.

LEAD TIME: Contact your SELECT representative.


IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for ETAP before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.


PIN & BARREL HINGE ELECTRIC PREPS

1-1/2" deep typ.door and frame

1-1/8" dia. typ.door and frame

PREPS: SELECT pin & barrel continuous hinges can be prepared for the adjustable concealed monitoring switch. Rigid welded assembly gives you the ability to adjust your monitoring switch to work with all applications.

LOCATION: Specify centerline dimension from top of hinge for custom locations. Standard locations from top of hinge to centerline of AMS are as follows: 79" hinge = 35-3/8" 83" hinge = 37-9/16" 85" hinge = 38-1/2" 95" hinge = 43-1/2"

HANDING: Specify the handing of each door requiring the AMS.

ORDER: Use suffi x “AMS”, location and handing. Example: SL300 83 SS, AMS@25-3/8", LH.

AVAILABILITY: Available on pin & barrel hinge models SL200, SL300, SL305. NOT AVAILABLE on powder coat fi nishes.



IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for AMS before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.

AMS (Adjustable Concealed Monitoring Switch)


EMS (Exposed Monitoring Switch)

PREPS: SELECT pin & barrel continuous hinges can be prepared for an exposed monitor switch. 120V AC/DC at 250A 30W or 28V AC/DC at 1A 30W.

LOCATION: 14-1/2" unless otherwise specifi ed.

HANDING: Specify the handing of each door requiring the EMS.

ORDER: Use suffi x “EMS” plus the location of the switch and handing. Example: SL300 83 SS, EMS@14-1/2", LH.

AVAILABILITY: Available on pin & barrel hinge models SL200, SL300, SL305.



IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for EMS before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.


14-1/2"

15/16"

1/4"

3/4"


CTP-VD (Current Transfer Prep-Von Duprin®)PIN & BARREL HINGE ELECTRIC PREPS

PREPS: SELECT pin & barrel continuous hinges can be prepared for Von Duprin power transfer unit.

LOCATION: Specify centerline dimension from top of hinge for custom locations. Standard locations from top of hinge to centerline of CTP-VD are as follows: 79" hinge = 39-9/8" 83" hinge = 41-9/16" 85" hinge = 42-1/2" 95" hinge = 47-1/2"

HANDING: Specify the handing of each door requiring the CTP.

ORDER: Use suffi x “CTP-VD”, location and handing. Example: SL300 83 SS, CTP-VD@39-3/8", LH

AVAILABILITY: Available on pin & barrel hinge models SL200, SL300, SL303, SL305, SL306.



IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for CTP-VD before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.

1-1/4"

Top of hinge to

centerline of cutout

1-5/8"

9-1/16"


CTP-AR (Current Transfer Prep-Adams Rite®)

PREPS: SELECT pin & barrel continuous hinges can be prepared for Adams Rite 4612 power transfer unit.

LOCATION: Specify centerline dimension from top of hinge for custom locations. Standard locations from top of hinge to centerline of CTP-AR are as follows: 79" hinge = 39-3/8" 83" hinge = 41-9/16" 85" hinge = 42-1/2" 95" hinge = 47-1/2"

HANDING: Specify the handing of each door requiring the CTP-AR.

ORDER: Use suffi x “CTP-AR”, location and handing. Example: SL300 83 SS, CTP-AR@39-3/8", LH.

AVAILABILITY: Available on pin & barrel hinge models SL200, SL300, SL303, SL305, SL306.



IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for CTP-AR before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.


Door

Top of hinge to

centerline of cutout


CE (Concealed Current Transfer)PIN & BARREL HINGE ELECTRIC PREPS

1-3/4"1-7/8"

PREPS: SELECT pin & barrel continuous hinges can be prepared with concealed current transfer. Available with 4 wires (CE-4D) or 8 wires (CE-8D).

LOCATION: Contact factory for available locations and template for door and frame preparation.

HANDING: Specify the handing of each door requiring the CE.

ORDER: Use suffi x “CE”, location and handing. Example: SL300 83 SS, CE-4D@40-11/16", LH.

AVAILABILITY: Available on pin & barrel hinge models SL200, SL300, SL305. NOT AVAILABLE on raised barrel applications.



IMPORTANT: SELECT Products Limited does not recommend preparing door and frame for CE before receipt of hinge. If door and frame must be prepared before receipt of hinge, contact factory for special template.

800-423-1174 Fax: 800-423-7107 www.select-hinges.com


9770 Shaver Road Portage, MI 49024 Ph: 800-423-1174 Fax: 800-423-7107 www.select-hinges.com

R-9 Full

catalog cover page - o.b5z.neto.b5z.net/i/u/10024946/f/selectcatalog.pdfselect products catalog...

Documents