Current instructions at www.jeco-inc.com 1-800-893-3006 Page 1 of 3

Parts List:

A. Left Leg Qty:1 B. Right Leg Qty:1 C. Seat Back Qty:1 D. Seat Qty:1

E.Bolt( M6*50mm) Qty:4 F. Bolt( M6*55mm) Qty:4 G. Washer Qty:8 H. Hexagonal Nut(M6)Qty:4

I. Plastic Cap Qty:4 J. Screw Cap Qty:8 K. Wrench Qty:1 L. Hexagonal WrenchQty:1

Thanks for shopping with Jeco

SKU# PB008 /

1-800-893-3006Ontario, CA 91761

Made in China

If you have questions regarding this product, call1-800-893-3006 Mon.-Fri. 9:00-5:00 PST

(California) and ask for our product specialists, ore-mail: cs@jeco-inc.com

See many more products on the Internet!www.jeco-inc.com

15010103Cast Iron Park Bench

Current instructions at www.jeco-inc.com 1-800-893-3006 Page 2 of 3

To Assemble:

Please save this manual for future reference.

Caution: Read, understand and follow all instructions before using this park bench.

Account for all parts and hardware before beginning assembly.

Assembly tool required is cross screwdriver which is included in hardware pack.

Step 1: Use 2 pcs long bolt # F and 2 pcs washer # G to attach the seat back(# C) and the right arm # B as belowdiagram. Do not tighten bolts until the bench is completely intact. Repeat the same procedure to the other sidefor arm # A.

Step 2: Attach the seat # D and arm # B by using 2 pcs short bolt # E, 2 pcs washer # G and 2 pcs nut # H ,please refer to below diagram. Repeat the same procedure to the other side for arm # A.

C A

B

GF

A

B

D

E GH

Current instructions at www.jeco-inc.com 1-800-893-3006 Page 3 of 3

Step 3: Make sure all parts in the park bench are in their right positions. Use wrench # K and hexagonal wrench #L to tighten all bolts. Cover all nuts # H with caps # I. Cover all bolts # E & # F with caps # J.

Now, your park bench is ready for use.

J

I