cassette system installation...installation instructions cordless roller shades 1) mount the...

2
3) Install the Shade Attach the bracketrail system to the wall brackets by holding the bottom lip of the bracketrail system up to the bottom of the wall bracket that is already mounted on the wall. While holding the bottom of the bracketrail system in place, gradually bring up the top lip of the bracketrail system to the top of the wall bracket. Press firmly untill you hear an audible click. First hold the bracketrail system in place with the bottom lip on the bottom of the wall bracket. Press the top of the bracketrail system onto the top of the wall bracket until you hear an audible ckick. 1) Mount the Brackets Mount the brackets to the wall or window frame, with the outside brackets no further than 2” (5 cm) from the ends of the headrail. On wide shades, space the additional bracket(s) at equal intervals. 2) Mount the Headrail Position the headrail with the front panel (A) resting on the top lip of all brackets. Push the bottom front of the headrail firmly backwards and toward the window until the lip on the rear of the headrail engages the bracket and snaps into place, (B) as shown. Cassette System Installation 2" (5 cm) Max. Space Evenly Space Evenly 2" (5 cm) Max. For wall or outside mounts, use the rear bracket holes. For inside or ceiling mounts, use the top bracket holes. Make sure the release tab is always mounted on the bottom. Make sure the release tab is always mounted on the bottom. A B Push here backwards and toward the window. 5/2013

Upload: others

Post on 26-Mar-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Cassette System Installation...Installation Instructions Cordless Roller Shades 1) Mount the Bracketrail The shade will come pre-installed on the white bracketrail system. If the clutch

3) Install the ShadeAttach the bracketrail system to the wall brackets by holding the bottom lip of the bracketrail system up to the bottom of the wall bracket that is already mounted on thewall.While holding the bottom of the bracketrail system in place, gradually bring up thetop lip of the bracketrail system to the top of the wall bracket. Press firmly untill you hearan audible click.

First hold the bracketrail system in place withthe bottom lip on the bottom of the wallbracket.

Press the top of the bracketrail system ontothe top of the wall bracket until you hear an audible ckick.

1) Mount the BracketsMount the brackets to the wall or window frame, with the outside brackets no furtherthan 2” (5 cm) from the ends of the headrail. On wide shades, space the additionalbracket(s) at equal intervals.

2) Mount the HeadrailPosition the headrail with the front panel (A) resting on the top lip of all brackets. Pushthe bottom front of the headrail firmly backwards and toward the window until the lip onthe rear of the headrail engages the bracket and snaps into place, (B) as shown.

Cassette System Installation

2"(5 cm)

Max.

Space Evenly Space Evenly 2"(5 cm)Max.

For wall or outsidemounts, use the

rear bracket holes.

For insideor ceiling

mounts, usethe topbracket

holes.

Make surethe releasetab is alwaysmounted onthe bottom.Make sure the

release tab isalways mountedon the bottom.

A

B

Push here backwards and toward the window.

5/2013

Page 2: Cassette System Installation...Installation Instructions Cordless Roller Shades 1) Mount the Bracketrail The shade will come pre-installed on the white bracketrail system. If the clutch

Installation InstructionsCordless Roller Shades

1) Mount the BracketrailThe shade will come pre-installed on the white bracketrail system. If the clutch ison the left end of the shade, reverse the bracket positions, left for right. Attacheither the pin-end, screw adjust bracket, or wheel adjust bracket to the otherside.

2) Mount the Wall BracketsThis system utilizes wall brackets provided (pictured below). Mount the wall brackets evenly spaced and approximately 1/2˝ above the opening on the wall.

Side Adjust Mounting Bracket Wheel Adjust Mounting Bracket

UniversalMounting Bracket

UniversalMounting Bracket

Bracket WheelAdjust

Bracket SideAdjust

Stop Device

Bracket WheelAdjust

Stop Device

Bracket SideAdjust

UniversalMounting Bracket

IMPORTANT: To prevent accidental damage to fabric, DO NOT open or cut the packaging around your shade with a utility knife or razor blade.