casing cementing module
DESCRIPTION
ExcelTRANSCRIPT
Page 1
CASING and CEMENTING ModuleLease and Block: Well Name & No:
OCS-G-Number: Permit MD: KOP:
Prepared By: Permit TVD: Date:
VENDORS:Casing Crews & Service: Frank's Casing Crews
Cement & Cement Service: HalliburtonCement Accessories: Gemoco, Centralizers. Davis Lynch, Float Equipment
Liner Equipment & Service: 0Mudline Hanger & Service: 0
Other Related Services: 0Wellhead Equipment: Cameron-Cooper
DEPTH CASING POINTS:Drive Pipe: 357' 2nd Drilling Liner:Conductor: None Production Liner:
Surface: 3,400' Production Tie-back String:Intermediate: 9,748' Production Long String:
1st Drilling Liner: None
1. DRIVE PIPE . . . .OD Drive Pipe: 20" Wall Thickness: 0.50" Slot: E Air Gap:
Penetration BML: 205' Pre Driven: Yes Water Depth: 48'
Wellhead: 20" 2M Swedge Flanged For NU Hydril and Diverter System
Accessories: 20" Hydrill with Diverter System0
2. CONDUCTOR CASING . . . .Hole Size: 0.000" Casing OD: 0.000"
Setting Depth, MD: 0' Setting Depth, TVD: 0'
INTERVAL Interval Cum DESIGN SAFETY FACTORFrom To Footage Wt/Ft Conn Grade Weight Weight Tension
0 0 0 0.00 0.00 0 0 0 0.000 0 0 0.00 0 0 0 0
Design Conditions -Backup Gradient: 0 , ppg Mud Weight: 0.0 , ppg
Fracture Gradient: 0.0 , ppg
Cement Design -% Excess OH: 0 Sacks of Lead: 0
Cement Top: 0' Slurry Wt. Lead: 0
Thickening Time: 0.0 hr Yield, ft³/sx Lead: 0.00
Placement Time: 0.0 hr Volume, ft³ Lead: 0
Type Lead Cement: 0
Type Tail Cement: 0
Well head: 0
Accessories: 00
Page 2
3. SURFACE CASING . . . .Hole Size: 17.500" Casing OD: 13.375"
Setting Depth, MD: 3,400' Setting Depth, TVD: 3,400'
INTERVAL Interval Cum DESIGN SAFETY FACTORFrom To Footage Wt/Ft Conn Grade Weight Weight Tension
0 3,400 3,400 61.00 Buttress K-55 207,400 207,400 4.640 0 0 0.00 0 0 0 0 0.00
Design Conditions -Backup Gradient: 8.942 , ppg Mud Weight: 9.4 , ppg
Fracture Gradient: 14.3 , ppgCement Design -
% Excess OH: 100 Sacks of Lead: 1,366
Cement Top: 48' Slurry Wt. Lead: 11.4
Thickening Time: 5.0 hr Yield, ft³/sx Lead: 2.81
Placement Time: 3.5 hr Volume, ft³ Lead: 3,840
Type Lead Cement: PREMIUM + 3% ASM + .25% D-Air-1
Type Tail Cement: PREMIUM + .25% D-Air-1
Well Head: 13-3/8" x 13-5/8" 5M SOW Head with two 2 1/16" 5M Gate Valves on flanged outletsBackup SOW Head Configured same
Accessories: Cementing Head and Swage with Buttress connectionPre-installed 13-3/8" Float Shoe and Collar, Top and Bottom Plugs, 6-Turbolators.
4. INTERMEDIATE CASING . . . .Hole Size: 12.250" Casing OD: 9.625"
Setting Depth, MD: 9,746' Setting Depth, TVD: 9,128'
INTERVAL Interval Cum DESIGN SAFETY FACTORFrom To Footage Wt/Ft Conn Grade Weight Weight Tension
0 9,746 9,746 47.00 LT&C S95 458,062 458,062 2.270 0 0 0.00 0 0 0 0 0.00
Design Conditions -Backup Gradient: 8.942 , ppg Completion Fluid Wt: 13.2 , ppg
Pore PSI For MASP: 12.0 , ppg TVD For MASP: 9,128'
Cement Design -% Excess OH: 50 Sacks of Lead: 1,960
Cement Top MD: 3,000' Slurry Wt. Lead: 14.5
Thickening Time: 6.0 hr Yield, ft³/sx Lead: 1.61
Placement Time: 3.0 hr Volume, ft³ Lead: 3,156
Spacer: 50 bbls Dual Purpose @ 13.5 ppg
Type Lead Cement: Premium + 15% Salt + 4% Gel + 3/4% CFR-2 + Retarder for 6 hr. Pumping Time
Type Tail Cement: None
Well head: 13-5/8" 5M x 10" 5M Tubing Spool with flg outlets, two 2-1/16" 5M Gate Valves InstalledType "S" Slip and Seal Ass'y
Accessories: Pre-installed Float Shoe and Collar, Top and Bottom Plugs50 Turbolators, Cementing Head and Swedge with LT&C threads
Page 3
5. PRODUCTION CASING . . . .Hole Size: 9.875" Casing OD: 7.625"
Setting Depth, MD: 11,712' Setting Depth, TVD: 10,830'
INTERVAL Interval Cum DESIGN SAFETY FACTORFrom To Footage Wt/Ft Conn Grade Weight Weight Tension
0 11,712 11,712 33.70 LT&C S95 394,694 394,694 1.980 0 0 0.00 0 0 0 0 0.00
Design Conditions -Backup Gradient: 12.0 , ppg Completion Fluid Wt.: 13.2 , ppg
Pore PSI For MASP: 11.8 , ppg TVD For MASP: 10,830'
Cement Design -% Excess OH: 50 Sacks of Lead: 777
Cement Top: 3,400' Slurry Wt. Lead: 14.5
Thickening Time: 5.0 hr Yield, ft³/sx Lead: 1.61
Placement Time: 4.0 hr Volume, ft³ Lead: 1,251
Spacer: 50 BBLS Dual Purpose mixed @ 15.0 ppg
Type Lead Cement: PREMIUM + 8%KCl + .6%Halad 22-A + 3/4% CFR-2 + Retarder for 6 hrs Pumping
0
Type Tail Cement: NoneWell head: 1-12" x 7 5/8" Type 'CA' Slip and Seal Ass'y and 1-12" x 7-5/8" X-bushing
10" 5M Dry Hole Tree w/one 2-1/16" 5M Gate Valved installed
Accessories: 07-5/8" Float Collar and Shoe Pre-installed, 60-Turbolators, Top & Bottom Plugs.Cementing Head and Swage with LT&C Connections, Thread Lock, Casing Dope
0000
Operational comments for special tubulars, handling tools, running procedures, cementing procedures, cementing accessories, cement testing, casing and shoe testing, wellhead equipment, or other relevant to string in question.
Install 6" Air Operated Valve 12' above water line for lost returns.
None required.
Torque Turn this string.
Drive Pipe:
Conductor Casing:
Surface Casing:
Intermediate Casing:
Production Long String or Liners:
Page 4
6. PRODUCTION LINER . . . .
Hole Size: 0.000" Casing OD: 0.000"
Setting Depth, MD: 0' Setting Depth, TVD: 0'
Top of Liner, MD: 0' Top of Liner, TVD: 0'
INTERVAL Interval Cum DESIGN SAFETY FACTORFrom To Footage Wt/Ft Conn Grade Weight Weight Tension
0 0 0 0.00 0.00 0 0 0 0.00
Design Conditions -Backup Gradient: 0.0 , ppg Completion Fluid Wt.: 0.0 , ppg
Pore PSI For MASP: 0.0 , ppg TVD For MASP: 0'
Cement Design -% Excess OH: 0 Sacks of Lead: 0
Cement Top: 0' Slurry Wt. Lead: 0
Thickening Time: 0.0 hr Yield, ft³/sx Lead: 0
Placement Time: 0.0 hr Volume, ft³ Lead: 0
Spacer: 0
Type Lead Cement: 00
Type Tail Cement: 0
Well head: 00
Accessories: 000
Liner Equipment: 00
Page 5
DRILLING CASING LINER SECTION
Hole Size: 0.000" Casing OD: 0.000"
Setting Depth, MD: 0' Setting Depth, TVD: 0'
Top of Liner, MD: 0' Top of Liner, TVD: 0'
INTERVAL Interval Cum DESIGN SAFETY FACTORFrom To Footage Wt/Ft Conn Grade Weight Weight Tension
0 0 0 0.00 0.00 0 0 0 0.00
Design Conditions -Backup Gradient: 0.0 , ppg Completion Fluid Wt.: 0.0 , ppg
Pore PSI For MASP: 0.0 , ppg TVD For MASP: 0'
Cement Design -% Excess OH: 0 Sacks of Lead: 0
Cement Top: 0' Slurry Wt. Lead: 0
Thickening Time: 0.0 hr Yield, ft³/sx Lead: 0
Placement Time: 0.0 hr Volume, ft³ Lead: 0
Spacer: 0
Type Lead Cement: 00
Type Tail Cement: 0
Well head: 00
Accessories: 000
Liner Equipment: 00
Page 6
DRILLING CASING LINER SECTION
Hole Size: 0.000" Casing OD: 0.000"
Setting Depth, MD: 0' Setting Depth, TVD: 0'
Top of Liner, MD: 0' Top of Liner, TVD: 0'
INTERVAL Interval Cum DESIGN SAFETY FACTORFrom To Footage Wt/Ft Conn Grade Weight Weight Tension
0 0 0 0.00 0.00 0 0 0 0.00
Design Conditions -Backup Gradient: 0.0 , ppg Completion Fluid Wt.: 0.0 , ppg
Pore PSI For MASP: 0.0 , ppg TVD For MASP: 0'
Cement Design -% Excess OH: 0 Sacks of Lead: 0
Cement Top: 0' Slurry Wt. Lead: 0.0
Thickening Time: 0.0 hr Yield, ft³/sx Lead: 0
Placement Time: 0.0 hr Volume, ft³ Lead: 0
Spacer: 0
Type Lead Cement: 00
Type Tail Cement: 0
Well head: 00
Accessories: 00
Liner Equipment: 00
Page 7
0
Rig Elevation:
NoneNoneNone
11,712'
104' Pipe ID: 19.0"
Setting Depth: 357'
Drift Diameter: 0.000"
Clearance: 0.000"
DESIGN SAFETY FACTORCollapse Top Burst Btm Burst
0.00 0.00 0.000.00
Gas Gradient: 0.000
MASP, psi: 0
Sacks of Tail: 0
Slurry Wt. Tail: 0
Yield,, ft³/sx Tail: 0
Volume, ft³ Tail: 0
Page 8
Drift Diameter: 12.515"
Clearance: 1.563"
DESIGN SAFETY FACTORCollapse Top Burst Btm Burst
1.16 1.41 1.840.00 0.00 0.00
Gas Gradient: 0.100
MASP, psi: 2,193
Sacks of Tail: 650
Slurry Wt. Tail: 15.6
Yield, ft³/sx Tail: 1.18
Volume, ft³ Tail: 767
Drift Diameter: 8.681"
Clearance: 0.813"
DESIGN SAFETY FACTORCollapse Top Burst Btm Burst
1.41 1.62 1.100.00 0.00 0.00
Fracture Gradient: #REF!
Mud Weight: 12.5
MASP, psi: 5,021
Sacks of Tail: None
Slurry Wt. Tail: 0
Yield, ft³/sx Tail: 0
Volume, ft³ Tail: 0
Page 9
Drift Diameter: 6.875"
Clearance: 0.625"
Estimated BHT: 180 ºF
DESIGN SAFETY FACTORCollapse Top Burst Btm Burst
1.18 1.87 1.300.00 0.00 0.00
Mud Weight: 13.2
MASP, psi: 5,021
Sacks of Tail: None
Slurry Wt. Tail: 0
Yield, ft³/sx Tail: 0
Volume, ft³ Tail: 0
Operational comments for special tubulars, handling tools, running procedures, cementing procedures, cementing accessories, cement testing, casing and shoe testing, wellhead equipment, or other relevant to string in question.
Page 10
Drift Diameter: 0.000"
Clearance: 0.000"
DESIGN SAFETY FACTORCollapse Top Burst Btm Burst
0.00 0.00 0.00
Mud Weight: 0.0
MASP, psi: 0
Sacks of Tail: 0
Slurry Wt. Tail: 0
Yield, ft³/sx Tail: 0
Volume, ft³ Tail: 0
Page 11
Drift Diameter: 0.000"
Clearance: 0.000"
DESIGN SAFETY FACTORCollapse Top Burst Btm Burst
0.00 0.00 0.00
Mud Weight: 0.0
MASP, psi: 0
Sacks of Tail: 0
Slurry Wt. Tail: 0
Yield, ft³/sx Tail: 0
Volume, ft³ Tail: 0
Page 12
Drift Diameter: 0.000"
Clearance: 0.000"
DESIGN SAFETY FACTORCollapse Top Burst Btm Burst
0.00 0.00 0.00
Mud Weight: 0.0
MASP, psi: 0
Sacks of Tail: 0
Slurry Wt. Tail: 0
Yield, ft³/sx Tail: 0
Volume, ft³ Tail: 0