case study sis mini (in pole) | manchester · the client (aone+area 10) chose this sis electrical...
TRANSCRIPT
Case Study
SIS Mini (in pole) | Manchester
Project: Passively Safe Signage, M56 Junction 6Product: SIS Mini (in pole)Client: AONE+ Area 10
SIS Mini (in pole) | Manchester...The SIS SOLO (Mini) has been installed on a passively safe signage scheme on the M56 near Manchester. The client (AONE+Area 10) chose this SIS Electrical disconnection system as it enabled all the SIS monitoring equipment to be installed above ground in the nearby lighting column.
As the new signs were being powered from this non passive lighting column, it enabled the SIS sensor cable and Sensor to be easily installed as part of the works. The end product leaves the client with an economical, above ground, zero volt electrical disconnection system which is simple and safe to maintain.
www.nal.ltd.uk
A One+ Area 10We were looking for a system
where we did not have to install
additional access chambers or
pillars. With NAL’s help a new
system was developed, and we are
delighted with the flexibility that
this option gives us for Passively
Safe Signage.
SIS Impact Sensor
SIS SOLO Monitor Unit
Weir Lane, Worcester WR2 4AY Tel: 01905 427100 Fax: 01905 427030 Email: [email protected]