case study digitech ink jet a4 f - comtec ipe word - case study_digitech_ink jet_a4_f.docx author...
TRANSCRIPT
Ritemp Technologies Pty. Ltd.
1084 South Road Edwardstown SA 5039
PO Box 338 Magil SA 5072
Telephone: + 61 8 8374 4633
Fax: + 61 8 8299 0892
Email: [email protected]
Digitech
challenge Current ink jet cartridge mold design/ cycle time does not yield sufficient parts current mold/ part characteristics Conventional: 4 cavity Current Cycle Time: Confidential part details Weight: 20.0 g Nominal Thickness: 2.40mm Material: PETG 15% GR
evaluation 1- Part analysis used to determine optimal curing time using Ritemp™ 2- Projected NEW cycle time reduction greater than 20% 3- New stack design by Ritemp™
Ritemp™ benefits 1. Greater than 20% reduction in
cycle time 2. Cooled with 3 GPM’s per mold half
3. Tolerance CPK improved 40%