case study chute design/build - kemper equipment€¦ · case study chute design/build. custom hood...
TRANSCRIPT
CASE STUDYChute Design/Build
Custom hood and spoon chute minimize material breakdown
SPECS: Incoming and outgoing conveyors, 24" belt width, 170 TPH at 300 FPM moving 30mm x 60mm and 60mm x 120mm chemical grade limestone
CHALLENGE: Chemical grade limestone producer needed to change direction and transfer product between conveyors , while maintaining speed and limiting product breakdown
SOLUTION: Kemper Equipment designed an adjustable chute with controls that tweak material flow, limiting impact while optimizing speed of material flow so that the limestone moves at the same rate from one conveyor to the next
Better with Kemper
For innovation, knowledge, safety and commitment, trust Kemper
610-273-2066 [email protected]