CASE STUDY 1 –EIGRPTopology Diagram

Instructions Plan Design a Physical Topology and Implement the complex International

Travel Agency (ITA) EIGRP network based on the above diagram and following specifications.

Implement the design on the lab set of routers. Verify that all configurations are optional and functioning according to

the guidelines

ScenarioThe ITA needs its core network set up with EIGRP with the following specifications. It has also recently acquired Local Travel Agency, which was running OSPF. Use the addressing scheme shown in the diagram.

1. The ITA core network is running EIGRP in AS 1. 2. Summarize the loopback interfaces on R2 with the best possible summary

to the other EIGRP routers 3. Loopback 192 on R3 represents a connection to the Internet. Originate a

default route into EIGRP from R3.4. The Local Travel Agency router, R4, needs to communicate with the ITA

core via OSPF area 0. 5. Redistribute OSPF into EIGRP. 6. Originate a default route into the OSPF process from R3. 7. Configure R2 to act as a DHCP server on the Ethernet subnet between R2

and R3.