carro elétrico - evlink-2012-catalog

Catalog2800CT1001R04/12

2012Class 2800

Electric Vehicle Charging SolutionsPowering the Future of Sustainable Mobility

CONTENTS

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2

Indoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

Outdoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6

Wall-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6Pedestal-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7

DC Quick Charging Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0

RFID Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14

Electric Vehicle Charging SolutionsDescription

© 2011–2012 Schneider ElectricAll Rights Reserved

2

Schneider Electric has developed a line of Electric Vehicle (EV) charging solutions for your unique needs. Schneider Electric will work with you to deliver the best charging infrastructure solution that includes product, installation, maintenance, and an infrastructure management system.

Our EV charging products are compatible with safety standards and industry specific standards, such as the Society of Automotive Engineers standards (SAE J1772).

Description Smart Charging, Smart Savings, Smart Grid

Residential Charging SolutionsOur residential charging stations provide simple, easy-to-install, and user-friendly solutions for charging electric vehicles at home. Installations are provided by a network of licensed installers.

Commercial and Fleet Charging SolutionsFleet and commercial customers can count on charging solutions that offer convenient public and private access.

DC Quick Charging SolutionsThe EVlink™ DC Quick Charger allows users to charge 80 percent of the battery in less than 30 minutes and provides a simple, efficient and safe way to quickly charge electric vehicles.

EVlink DC Quick Charging Stations are CHAdeMO compliant.

Electric Vehicle Charging SolutionsIndoor Charging Stations

3© 2011–2012 Schneider ElectricAll Rights Reserved

Indoor Charging Stations

Features

Catalog Numbers

Indoor Charging Station

Residential Applications

• Segmented charge and delay charge progress indicator

• Stop Button and Indicator• Power status and system

detected fault indicator• Delay button and indicator

Cable Holder:

• Supports and helps organize the cable• Independently mounted from enclosure

Connector and Cord:

• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)

Enclosure:

• Non-metallic• Indoor wall-mount

(stud, drywall, or masonry wall)

Protection:

• Integral Ground Fault Protection at 5 mA• Ground fault function tested before each charge

cycle begins• Auto restart after ground fault or main power loss

Interface:

Table 1: Indoor Charging Station—Wall-Mount

Catalog Number

Output Voltage System

Output Current

Mounting Type

Charging Units

Application Features

EV2430WS 240 Vac only 30 A Wall Single Indoor Delay Start



4

Technical Specifications

N L1 L2

OvercurrentProtection

Device

120/240 Vac Only

EquipmentGround

SolidNeutral

240 V

120 V

120 V

Ground

ElectricVehicle

ChargingStation

Figure 1: Indoor Charging Station Wiring Diagram

Table 2: Indoor Charging Stations

Power Specifications

Input Power240 Vac Only, single-phase, 60 Hz, 30 A maximum

Input Power Connection Line 1, Line 2, and Ground

Feeder Circuit Breaker 2-pole, 40 A, non-GFCI type

Output Power 240 Vac, 30 A, 7.2 kW max.

Physical SpecificationsEnclosure Type Type 1 (Indoor only)

Enclosure Dimensions (W x H x D)9.53 x 12.73 x 4.36 in.(242 x 323 x 111 mm)

Enclosure Mounting Wall-mount

Cable Type SAE J1772

Cable Length 18 ft. (5.5 m)

Cable Management Non-retractable, separate from the enclosure

Shipping Weight 17.0 lbs. (7.71 kg)

User InterfacePower Available Status indicator

Charging Eight-segment progress indicator

Ground Fault Red status indicator

Stop Push button and red stop indicator

Delay StartPush button to delay up to eight hours, in one-hour increments

ProtectionGround Fault Protection Integral, CCID 5 mA, auto reset

Ground Fault Protection System Test Automatic at the beginning of each charge cycle

EnvironmentalOperating Temperature -22°F to 131°F (-30°C to 55°C)

Electro-static Discharge 15 kV open air, 8 kV contact

Surge 6 kV

Radiated Immunity 20 V/m

Conducted Immunity 20 V

Electrical Fast Transient/Burst (EFTB) 2 kV

Emissions FCC Class B

Standards ComplianceNEC Article 625

SAE J1772

UL 2594, UL 2231-1, UL 2231-2, UL 991, UL 1998, and UL 2251



DimensionsFigure 2: Indoor Charging Station

in.(mm) Dimensions:

9.53(242)

12.7(323)

4.4(111)

Figure 3: Cable Bracket

3.1(79)

5.5(140)

5.2(132)

8.2(208)

1.5(38)

3.3(84)

4.3(109)

4.5(114)

.25(6.4)

3.0(76)

1.5(38)2x

1.25(32)2x

6x

in.(mm)Dimensions:

Electric Vehicle Charging SolutionsOutdoor Charging Stations


6

Outdoor Charging Stations

Wall-Mount

Features

Catalog Numbers

Interface:

• Power status• Charge indicator• System detected fault indicator

Cable Holder:

• Connector dock• Supports and helps organize the cable• Independently mounted from enclosure

Connector and Cord:


Enclosure:

• Metallic enclosure• Indoor/outdoor wall-mount

Outdoor Charging Station (Wall-Mount)

Residential and Commercial Applications

Authentication:

• Localized RFID solution (optional)

Protection:

• Integral Ground Fault Protection at 5 mA• Ground fault function tested before each charge

cycle begins• Auto restart after ground fault or main power loss

Table 3: Outdoor Charging Stations—Wall-Mount

Catalog Number

Output Voltage System

Output Current

Mounting Type

Charging Units

Application Features

EV230WSR 208–240 Vac 30 A Wall Single Indoor/Outdoor —

EV230WSRR 208–240 Vac 30 A Wall Single Indoor/Outdoor RFID (non-networked)



Pedestal-Mount

Features

Catalog Numbers

Table 4: Outdoor Charging Stations—Pedestal-Mount

Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Authentication

EV230PSR 208–240 Vac 30 A Pedestal Single Outdoor —

EV230PDR 208–240 Vac 30 A Pedestal Dual Outdoor —

EV230PSRR 208–240 Vac 30 A Pedestal Single Outdoor RFID (non-networked)

EV230PDRR 208–240 Vac 30 A Pedestal Dual Outdoor RFID (non-networked)

Interface:

• Power status• Charge indicator• System detected fault indicator

Cable and Connector Holders:

• Support and help organize cables• Connector storage• Integral with the enclosure

Connector and Cable:


Enclosure:

• Metallic enclosure• Pedestal-mount

Protection:

• Integral Ground Fault Protection at 5 mA• Ground fault function tested before each charge cycle begins• Auto restart after ground fault or main power loss

Outdoor Charging Station (Single Unit, Pedestal-Mount)

Commercial Applications

Authentication:

• Localized RFID solution (optional)

Mounting:

• Metallic Pedestal

Outdoor Charging Station (Dual Unit, Pedestal-Mount)

Commercial Applications



8


Outdoor Pedestal-Mount Charging Stations

Outdoor Wall-Mount Charging Station

Single Unit Dual Unit

Table 5: Outdoor Charging Stations (Wall and Pedestal Mount)

Power Specifications (Each charging unit)

Input Power 208–240 Vac, 30 A, single phase, 60 Hz

Input Power Connection Line 1, Line 2, and Ground

Feeder Circuit Breaker 2-pole, 40 A, non-GFCI type

Output Power 208–240 Vac, 30 A

Physical Specifications

Enclosure Type Type 3R

Enclosure Dimensions See Dimensions on Page 9

Enclosure Mounting Wall or Pedestal

Cable Type SAE J1772

Cable Length 18 ft. (5.5 m)

Cable Management Non-retractable, integral with the enclosure

Unit OptionsSingle unit (Wall-mount)Single or Dual units (Pedestal-mount)

User Interface

Power Available Status indicator

Charging Blinking blue indicator

System Detected Fault Red status indicator

Authentication

Type Non-networked RFID authentication card

Programming Radio frequency remote control

Protection

Ground Fault Protection Integral, CCID 5 mA, auto reset

Ground Fault Protection System Test Automatic at the beginning of each charge cycle

Environmental

Operating Temperature -22°F to 131°F (-30°C to 55°C)

Electro-static Discharge 15 kV open air, 8 kV contact

Surge 6 kV

Radiated Immunity 20 V/m

Conducted Immunity 20 V

Electrical Fast Transient/Burst (EFTB) 2 kV

Emissions FCC Class B

Standards Compliance

NEC Article 625

SAE J1772

UL 2594, UL 2231-1 & UL 2231-2, UL 991, UL 1998 and UL 2251



Dimensions

Figure 4: Outdoor Wall-Mount Charging Station

Figure 5: Cable Bracket with Connector Dock

9.8(250)

13.1 (333)

18.1 (460)

20.5 (521)

6.7(170)

7.1(181)

in.(mm)Dimensions:

4.0(102)

2.0(50.8)

3.8(97)

5.8(148)

5.0(127)

in.(mm)Dimensions:

Figure 6: Pedestal Base for Outdoor Charging Station

Figure 7: Outdoor Pedestal-Mount Charging Station

7.9(200) 5.9

(150)

7.9(200)

.70(17.5)

3.9(98)

4.1(103)2x

1.8(46)2x 4.3

(108)2x

2x

.80(20)2x5.9

(150)

4.9(125)

2x1.0(25)2x

4.1(103)

3.7(93)2x

4x R .30(7.5)

3.0(76.2)

Dimensions: in.(mm)

49.6(1260)

49.6(1260)

6.6(166.5)

6.6(166.5)

7.9(200)

7.9(200)

5.2(133)

Single Unit Dual Unit

13.0(330)

6.7(170)

13.0(330)

in.(mm)Dimensions:

Electric Vehicle Charging SolutionsDC Quick Charging Station


10

DC Quick Charging Station

The EVlink™ 50 kW charging station allows compatible vehicles to be recharged to 80% in approximately 30 minutes.

Features

NOTE: EVlink™ DC Quick Charging Stations are CHAdeMO compliant.

Wireless Communication Antenna (optional)

Connector and Cable:

• 125 A dc connector• CHAdeMO compliant• Cable length: 20 ft. (6.1 m)

Enclosure:

• Metallic enclosure• Pedestal-mount

RFID Authentication orCredit Card Reader (optional)

Metallic Pedestal

Touch Screen Display

• 5.7 in. backlit LCD touch screen• Display of residual charge and set point

Power Compartment Cover

Emergency Stop Button

Catalog Numbers

Table 6: DC Quick Charging Stations

Catalog Number Authentication Input VoltageInput

CurrentOutput Voltage

Output Current

Mounting Type

Charging Units

Application

EVF20850DTR RFID (non-networked)208 V, 3-phase 160 A

500 Vdc Max.

125 AMax.

Pedestal Single Outdoor

EVF20850DTB Credit Card Pedestal Single Outdoor

EVF24050DTR RFID (non-networked)240 V, 3-phase 140 A

Pedestal Single Outdoor

EVF24050DTB Credit Card Pedestal Single Outdoor



Technical Specifications Table 7: DC Quick Charging Stations

Power Specifications (Each charging unit)

Input Power 58 kVA

Input Power Connection

Control Compartment Line and Neutral

Power Compartment Line 1, Line 2, Line 3, and Ground

Feeder Circuit BreakerConductors feeding the charging station and the upstream overcurrent protection must be sized in accordance with local electrical codes.

Output Power 50 kW max.

Physical Specifications

Enclosure Type NEMA 3R

Enclosure Dimensions 84 x 42 x 34 in. (2138 x 1068 x 869 m)

Enclosure Mounting Pedestal

Cable Type CHAdeMO compliant 1

1 Schneider Electric will adapt to SAE when standard is released.

Cable Length 20 ft (6.1 m)

Cable Management Non-retractable, integral with the enclosure

Unit OptionsWireless communication antenna, User ID RFID tag reader, Credit Card Reader

Shipping Weight 1650 lbs (748 kg)

Authentication

RFID Card Option Charging station stored RFID card IDs

Major Credit Card Option Secure cellular network

Environmental

Operating Temperature -22°F to 122°F (-30°C to +50°C)

Storage Temperature -4°F to 176°F (-20°C to +80°C)

RoHS All elements are RoHs compliant

Standards Compliance and Certifications

UL 2202 Electric Vehicle (EV) Charging System Equipment

UL 2231-1 and 2231-2 Personnel Protection Systems for Electric Vehicles (EV) supply circuits

UL 2251 Plugs, Receptacles and Couplers for Electric Vehicles



12

The DC Quick Charging Station includes a 7.5 inch LCD touch screen display. Additional options include an RFID tag reader and credit card reader.

The touch screen provides:

• User friendly graphic access

• Secure administrative access to change settings

• Usage, operation, and fault instructions

Touch Screen Display

Figure 8: Touch Screen Display and Other Options

A

B

C

A

Touch Screen Display+ RFID Reader

Touch Screen Display+ Credit Card Reader

(A) Touch screen

(B) RFID tag reader

(C) Credit card reader



Dimensions

Figure 9: DC Quick Charging Station

33.8(858.5)

26.8(680.7)

3.0(76)

73.9(1877)

83.4(2118.3)

87.5(2222.5)

42(1066.8)

20.2(513.1)

36.8(934.7)

21.1(535.9)

in.(mm) Dimensions:


Electric Vehicle Charging Solutions Radio Frequency Identification (RFID) Accessories

14

Radio Frequency Identification (RFID) Accessories

The RFID solution for Schneider Electric EV charging stations consists of the following accessories:

• Handheld Programmer

• RFID Authentication Card

Handheld Programmer

EVRFIDHP

Features• Used to add and remove users

• One needed for total charging station system

• Connects via radio frequency

• Feedback via audio tone and LED indicator on Proximity Reader

• 4-digit PIN access


Frequency 125 kHz / 62.5 kHz

Dimensions 7.0 x 2.5 x 0.75 in. (178 x 63.5 x 19 mm)

Weight 7 oz. (200 g)

Operating Temperature -22°F to 131°F (-30°C to 55°C)

Color Black

Material ABS

Description Catalog Number

RFID Handheld Programmer EVRFIDHP

RFID Authentication Cards

EVRFIDKF-10

Features• Wallet friendly

• Robust and durable design

• Industry standard format

• Unique ID codes


Frequency 125 kHz / 62.5 kHz

Weight 0.31 oz. (8.8 g)

Operating Temperature -40°F to 158°F (-40°C to +70°C)

Humidity 0–100% non-condensing

Material ABS

Description Catalog Number

RFID Authentication Card (Quantity of 10) EVRFIDKF-10

Electric Vehicle Charging SolutionsRadio Frequency Identification (RFID) Accessories


Accessory DimensionsFigure 10: Handheld Programmer

Figure 11: RFID Authentication Cards

2.5(63.5)

7.0(178)

.75(19)

in.(mm)Dimensions:

2.13(54)

.034(.86)

3.37(85.5)

in.(mm)Dimensions:

2800CT1001R04/12 © 2011–2012 Schneider Electric All Rights Reserved

Schneider Electric USA, Inc.1601 Mercer RoadLexington, KY 40511 USA1-888-778-2733www.schneider-electric.us

Schneider Electric™ and EVlink™ are trademark owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are property of their respective owners.

carro elétrico - evlink-2012-catalog

Documents

environmentaloperating temperature electro

auto reset automatic

main power loss

credit card reader

outdoor charging stationswall

localized rfid solution

outdoor charging station

rfid tag reader