carpentry oxy-fuel know how’s electrode numbering welds & positions general shop safety 200...
TRANSCRIPT
CarpentryOxy-fuel
Know How’sElectrode
NumberingWelds & Positions
General shop safety
200 200 200 200 200
400 400 400 400 400
600 600 600 600 600
800 800 800 800 800
1000 1000 1000 1000 1000final jeopardy
May 2007
Click to check answer
Carpentry 200
Stationary piece of equipment used to rip a piece of plywood.
Answer:
What is table saw?
Back to game board
Oxy-fuel Know How’s for 200
Never stand in front of this when turning on gas
Click to check answer
Oxy-fuel Know How’s for 200
Answer:
What are the gauges?
Back to game board
Electrode Numbering for 200
Identify the tensile strength on this rod: E6013
Click to check answer
Electrode Numbering for 200
Answer:
What is 60 thousand pounds?
Back to game board
Welds & Positions for 200
Click to check answer
Welds & Positions for 200
Answer:What is a butt?
Back to game board
General Shop Safety
Class of fire when paper and clothes are on fire
Click to check answer
General Safety
Answer:What is class A?
Back to game board
Carpentry 400
Click to check answer
Portable saw that can be used to rip a piece of plywood.
Carpentry 400
Answer:
What is circular saw?
Back to game board
Daily Double
Click to continue
Daily Double
Never use acetylene at a pressure greater than this
Click to check answer
Daily Double
Answer:What is 15 PSI?
Back to game board
Electrode Numbering for 400
The third digit from the left indicates this
Click to check answer
Electrode Numbering for 400
Answer:What is the welding position?
Back to game board
Welds & Positions for 400
Click to check answer
Welds & Positions for 400
Answer:
What is flat?
Back to game board
General shop safety 400
Numbered lens used when cutting with the oxyacetylene torch.
Click to check answer
More Welding Terms for 400
Answer:What is a #5 lens?
Back to game board
Carpentry 600
Click to check answer
One should use this saw to cut a hole for a door knob.
Carpentry 600
Answer:What is jigsaw?
Back to game board
Oxy-fuel Know How’s for 600
A carbonizing flame occurs when there is too much of this gas.
Click to check answer
Oxy-fuel Know How’s for 600
Answer:
What is acetylene?
Back to game board
Electrode Numbering for 600
Welding position for this rod: E7048
Click to check answer
Electrode Numbering for 600
Answer:
What is vertical down only?
Back to game board
Welds & Positions for 600
Click to check answer
Welds & Positions for 600
Answer:What is a tee?
Back to game board
Number of lens used when welding
Click to check answer
General safety 600
Answer:
What is a #10 lens?
Back to game board
Carpentry 800
Click to check answer
This should be worn at all times in the shop to prevent eye injuries.
Carpentry 800
Answer:What is safety glasses?
Back to game board
Oxy-fuel Know How’s for 800
Preheat metal to this color before starting to cut
Click to check answer
Oxy-fuel Know How’s for 800
Answer:What is cherry red?
Back to game board
Electrode Numbering for 800
The last digit on a welding rod indicates this
Click to check answer
Electrode Numbering for 800
Answer:
What is current?
Back to game board
Welding positions
Click to check answer
.Makes vertical and overhead welds so difficult.
Welding positions for 800
Answer:
What is gravity?
Back to game board
More Welding Terms for 800
Measure of energy available or work that can be done
Click to check answer
General safety
Fire hazard if not short or put up.
More Welding Terms for 800
Answer:
What is a watt?
Back to game board
What is long hair?
Carpentry 1000
Click to check answer
Stationary tool used for difficult cuts.
Carpentry 1000
Answer:
What is bandsaw?
Back to game board
Oxy-fuel Know How’s for 1000
A burning inside the torch that causes a squealing or hissing noise
Click to check answer
Oxy-fuel Know How’s for 1000
Answer:What is flashback?
Back to game board
Electrode Numbering for 1000
What the E stands for
Click to check answer
Electrode Numbering for 1000
Answer:What is electrode?
Back to game board
Welds & Positions for 1000
Click to check answer
Welds & Positions for 1000
Answer:What is vertical down?
Back to game board
Daily Double
Click to continue
Daily Double
One should say what before striking an arc to prevent welding flash.
Click to check answer
Daily Double
Answer:
What is cover?
Back to game board