cargo accessment

53

Upload: banyar-thein-win

Post on 26-Oct-2014

123 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Cargo Accessment
Page 2: Cargo Accessment

ASCARGO INTERNACIONAL, S.L.Ribera de Axpe, 5048950 ERANDIO-BILBAO-SPAINFax: +34 944 800 559 / +34 944 800 1 32email: [email protected]: +34 - 944 800 753

CARGO ACCESS EQUIPMENTMANUFACTURES:

Spare Parts

Page 3: Cargo Accessment

HATCH COVER EQUIPMENT

CLEATS

WHEELS

RUBBERSEALINGS

HYDRAULICS

Single Pull Cover Rod Connected

ASCARGO cares about quality.

INTERNATIONAL COODINATION - EDIFICIO "UDONDO" - RIBERA DE AXPE, 5048950 ERANDIO - VIZCAYA (SPAIN)TELEPH. +34 - 94 480 07 53 - TELEX: 65511 ZUBIC EFAX: + 34 - 94 480 05 59 / 94 480 01 32

Wheel guide rail

Compression bar

Coaming bar Panel top plateCross joint cleat

Rubber gaskets

Wire to winch orcrane hook

Balancing roller

Connecting rod

Srew Cleat

Eccentricwheel

Coaming hatch stays

Coaming

Page 4: Cargo Accessment

CARGO ACCESSEQUIPMENT

SINCE 1958

HATCH COVER PARTS& REPAIRS

For ordering please specify thefollowing points:

1. Name of original manufacturer

2. Part name

3. Part number

4. Shipyard Hull number

5. Lloyd's Register No.

Fax: + 34 944 800 559www.ascargo.com

3

Page 5: Cargo Accessment

HISTORYBased on the ideas of Scottish brothers Robert and Joseph MacGregor, thechange from wooden Hatch covers to mechanically operated hatch covers beganto take place in 1950s.Thus, the name MacGregor became synonymuswhit the various of mechanically operated hatch covers.1949 - Macgregor- Comarain formed by Henri Kummerman in France1951 - Dipl.-ING.H.K. Kloess founded Deutsche MacGregor1954 - Elcano (Sevilla) built in Spain the first ship with mechanically operatedhatch covers with MacGregor licence named "Benisanet"1955 - Dr. R. Zubiaga Naval Ing. (Newcastle,King´s College) founded Cargocover(later ASCARGO)1956 - First balanlift single-pull with connecting rods projected by ASCARGO(Cargocover) for Euskalduna Shipyard (Bilbao)1960 - First reefer fitted in Spain with ASCARGO hatch covers1966 - The three Swedish shipbuilding Goups Eriksberg, Gotaverken andKockums,founded a joint hatchcover company: ASCA (Associaeted Cargo GearAB) The activities in this field conducted separalely in the past by thesethree yards was been acquired by ASCA1967 - ASCARGO (Spain) associated with ASCA for Southern Europa, Centraland South America and Africa1967 - OY NAVIRE Ab (Finland) associated with ASCA for Finland andGermany west market1967 - ASCA built the biggest workshop for hatch covers KAYABA industryCo (Japon)1969 - Balanlift single-pull instaled by ASCA under ASCARGO license inVerolme United and Van der Giessen in Holand, Aaborg Vaerf A/S in Denmark,Warsila (Finland), Rauma Repola O/Y(Finland) Kanada Zosen and IzumiZosen (Japon)1969 - Navire Cargo Gear AB formed in Finland

4

Page 6: Cargo Accessment

1970 - Agreement between Oy NAVIRE Ab and ASCARGO1971 - Balanlift single-pull instaled by NAVIRE-KAYABA under ASCARGOlicence in Mitsui (Japon) and Sandyaso Japan Shoji1973 - When in 1973 ASCA was acquired by NAVIRE Oy, we ASCARGOdecided to pursue our own course1967-1973 - Balanlift single-pull instaled in Finland (25 ships), Norway (10),Japan (10), Argentina (3), Brasil (2), Holand (2) by ASCA (Sweden) andNAVIRE (Finland) under ASCARGO licence1967-1973 - ASCA and NAVIRE instaled more than 150 under ASCARGOlicence1980 - ASCARGO design the C/Nº 125 "Tista" at CASSENS WERFT(GERMANY)1981 - Kone corporation acquired NAVIRE1982 - ASCARGO design the first general purpose vehicle carrier,able totransport cars, trailers and wheeled flats loaded with containers. The ro/carcarrier with a capacity for 60,12,5m.long trailers,120 TEU and 537 cars1983 - The international MacGregor organisation was acquired by NAVIREO/Y1985 - MacGregor Far East ltd. (MGFE) and Tsuji Heavy Heavy IndustriesCo. Have both signed an agreement with Kvaerner, under which they willcollaborate regarding cargo access equipment, in Japan, Korea, China andTaiwan1986 - MACOR, Marine Systems International gmbH was formed from DeutscheMacGregor GmbH (1951)1970-1988 - MacGregor had monopoly at the public Spanish Shipyards becauseof MacGregor/AESA Sevilla licence1970-1988 - ASCARGO obtained 90% of the Spanish market in PrivateShipyards1993 - Incentive, the international industrial group, acquired MacGregor-Navire´s shares from Kone Corporation and form MacGregor group1994 - ASCARGO acquired HATCHWAY DYNAMICS S.A.1995 - ASCARGO developped a specialized Spare Parts Department focusedin attending demands from customers all around the world2003 - More than 1000 list of reference under ASCARGO name

5

Page 7: Cargo Accessment

The brothers Robert and Joseph Mac Gregor from Whitley Bay inNorthumberland invented watertight steel hatch covers withmechanical operating systems to replace the time consuming woodenhatch covers.

ASCARGO originates from CARGOCOVER and ASCA whichcompany was formed by the three main Swedish shipyards back in1966.

All ship's hatch covers can be serviced and supplied with spareparts through the ASCARGO organization.

When there is a need of spare parts and/or service work for ourproducts, our resources are world-wide.

6

INTERNATIONAL1958SPAIN 1955

GÖTAVERKENERIKSBERGKOCKUMS

Sweden 1966

Page 8: Cargo Accessment

What we do:GENERAL SERVICING

This includes new fabrication or repairs to steelwork for all kinds of cargo access equipment,the renewal or refurbishing of piping, wiring and hydraulics, the replacement of rubber sealing.Work can be carried out either in port or at sea.

SERVICE STATIONS

ASCARGO INTERNATIONAL Service Stations are in all the world's major ports. All ourService Stations are capable of providing engineers and equipment and carry out full surveywork.

EMERGENCY REPAIRS

The servicing operation is on call 24 hours a day, 7 days a week. ASCARGO engineers canbe ready to meet the ship on arrival in port, to carry out immediate repairs and will, if necessary,sail with the ship.

Non-standard parts of older or specialised vessels, or any kind of hatch-cover can ususallybe delivered in less than one week.

TRAVELLING SHIPS REPAIRS SQUADS

With adequate planning, major programmes can be made without loss of cargo handling timeor ship's schedule. This involves minor work being carried out at the sea and major work inport.

SPARE PARTS FOR VESSELS BUILT IN SPAIN

An important requirement of Shipwners who have built vessels in Spain or have purchasedSpanish built ships is their need to obtain Spanish made spare parts. This service is providedby ASCARGO through its SPARE PARTS DEPT.

HYDRAULIC & PIPEWORK SERVICE

ASCARGO is one of the few Companies which can offer total hydraulic and pipework capability.We are able to offer our specially trained and highly skilled Engineers and pipe fittersexperienced in both high and low pressure hydraulic systems in all types of ships. Our repairfacility is capable of repairing hydraulic cylinders, minipacks, power packs, pumps, jacks andmotor gearbox units. We can also design and modify existing designs on such items as mini-packs and power packs. Rods and barrels can be replaced, rods and bores re-chromed.

7

Page 9: Cargo Accessment

8

Our factories also manufacture their own hydraulic cylinders, minipacks power packs, givinga total refurbishment capability.

MAINTAINING RO-RO ACCESS EQUIPMENT BY ASCARGO

Ro-Ro Equipment of any type can be maintained by the ASCARGO Service Division.

HYDRAULIC EQUIPMENT

ASCARGO can supply promptly, any of the following elements:

Hydraulic power set componentsValvesManual distributorsElectrovalvesCylindersDouble acting cylindersHigh pressure rigid pipingHigh pressure flexible pipingPipe connections

N.B.:

As a wide variety of spare parts are available, coding all these parts is endless, coding hasbeen done only for the most common items accordingly:

Before ordering, please clearly specify the following points to avoid unnecessary confusionand misdelivery.

1. Part Name2. Part Number3. Name of Original Manufacturer4. Shipyard Hull Number5. Besides above, Necessary information if any

Page 10: Cargo Accessment

9

Contents INTERNATIONAL STANDARD SPARE PARTS

PageDESCRIPTION

Linear 10.00..........................................................................................................................

Other Paking Linear..............................................................................................................

MGN 10977...........................................................................................................................

Corner and End Pieces........................................................................................................

Corner and End Pieces........................................................................................................

Screw 11.00..........................................................................................................................

Screw 11.02..........................................................................................................................

Screw 11.03..........................................................................................................................

Flush 11.50 (IMPA: 233226-233235)....................................................................................

Quick Acting 13.00 / Lenght 315mm (IMPA: 233250)...........................................................

Quick Acting 13.01 / Lenght 405mm (IMPA: 233251-233261)..............................................

Quick Acting 13.02 (IMPA: 233266-233269).........................................................................

Quick Acting 13.03 / Lenght 440mm.....................................................................................

Quick Acting 13.04 / Lenght 285mm.....................................................................................

Quick Acting QE-80B / Lenght 315mm.................................................................................

Quick Acting QE-81B / Lenght 180mm.................................................................................

Quick Acting NCG 10424 / Lenght 275mm...........................................................................

Quick Acting NCG 10797 / Lenght 265mm...........................................................................

Quick Acting 110.00 / Lenght 450mm...................................................................................

Wedge Type 12.00.................................................................................................................

Wedge Type 112.01........................................................................................................................................

Wedge 91201 / CS-5D............................................................................................................

Eccentric 20.00 Diameter 200mm (IMPA: 233271)...............................................................

Eccentric 20.02 Diameter 260mm (IMPA: 233273-233285).................................................

Sprocket Wheels...................................................................................................................

Chain Guide Rollers of All Types in All Sizes........................................................................

Ballancing Roller 22.04 Double Link 2'5-4 tons (IMPA: 233291-233297).............................

Ballancing Roller 22.05 Single Link 2'5-4 tons (IMPA: 233301-233302)..............................

Ballancing Roller 22.09 Double above 4 tons (IMPA: 233306-233312)...............................

Ballancing Roller 22.10 Single above 4 tons (IMPA:233316-233317)..................................

40.05 2,5-4 tons (IMPA: 233331)..........................................................................................

40.06 2'5-4 tons (IMPA: 233332)..........................................................................................

40.07 above 4 tons (IMPA: 233333).....................................................................................

40.08 above 4 tons (IMPA: 233334).....................................................................................

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

30

31

32

32

33

34

35

35

36

36

37

37

38

38

Page

RUBBER SEALS

CLEATS

WHEELS

BALLANCING ROLLER

SHACKLE

Page 11: Cargo Accessment

10

Contents INTERNATIONAL STANDARD SPARE PARTS

PageDESCRIPTION

Chain Coupling SK .............................................................................................................

Thimbles..............................................................................................................................

Tumbuckles.........................................................................................................................

Shackles Dee......................................................................................................................

Shackles Bow......................................................................................................................

Sockets Open......................................................................................................................

Sockets Closed...................................................................................................................

Sockets Open Wedge.........................................................................................................

First-clip-clip........................................................................................................................

40.50 Left Hand (IMPA: 233321-233323)...........................................................................

40.51 Right Hand (IMPA: 233324-233326).........................................................................

40.52 Right Hand...............................................................................................................

40.53 Left Hand..................................................................................................................

Type MB..............................................................................................................................

Type KYB..........................................................................................................................................

Type AO-16000...................................................................................................................

M.G.01 (DV-1).....................................................................................................................

NCG 10548.........................................................................................................................

Motors.................................................................................................................................

Cylinders.............................................................................................................................

Gauges...............................................................................................................................

Cylinders Wheel Lifting.......................................................................................................

Filters..................................................................................................................................

Portable Pump Units...........................................................................................................

Hydraulics Power Units.......................................................................................................

Hoses..................................................................................................................................

Valves.................................................................................................................................

Pumps.................................................................................................................................

Photo-Cells.........................................................................................................................

Limit-Switches.....................................................................................................................

Motors.................................................................................................................................

Rotating Lamps and Alarms................................................................................................

Cables................................................................................................................................

Canseal / Canseal-R..........................................................................................................

SteamKote..........................................................................................................................

39

40

40

40

40

40

40

40

40

41

42

43

43

44

45

46

47

47

48

48

48

48

48

48

48

48

48

48

49

49

49

49

49

50

51

Page

CHAIN ANDCONNECTING CHAINS

JUNCTION PIECES

JACKS

DRAIN VALVES

HYDRAULICCOMPONENTS

ELECTRICCOMPONENTS

HATCH SEALING TAPES

ANTICORROSION TAPES

Page 12: Cargo Accessment

11

INTERNATIONAL STANDARD SPARE PARTS

Rubber seals

Natural rubber - 170.00Oil resistant rubber24-02126

Natural rubber - 170.20

Watertight joint -10.00.11 Watertight joint - 10.00.08

Oiltight joint - 10.00.14Oiltight joint - 10.0017

Oiltight joint - 58650079904-01001

92mm 69mm

Linear

94mm 71mm

50mm

32mm

71mm 71mm

40mm

71mm

Page 13: Cargo Accessment

12

INTERNATIONAL STANDARD SPARE PARTS

Rubber Seals

P4-11001 10-1028034-10415110-01-01

110-11-015-320-130

4-212834-104125-320-170

10-10800110-04-01

4-402834-10409110-02-01

34-10414110-09-01

79920-01001

Linear

Page 14: Cargo Accessment

13

INTERNATIONAL STANDARD SPARE PARTS

MGN 10977

Rubber Seals

When ordering please state

Whe

n or

derin

g pl

ease

sta

te

72 + 1,6-

67 +

1,6

-

Page 15: Cargo Accessment

14

INTERNATIONAL STANDARD SPARE PARTS

CORNER AND ENDPIECES

Rubber Seals

3-way corner 90º Right/Left hand (H) 3-way corner 45º Right/Left hand (H)

Corner 90º standing

Corner 90º flat

End piece 45ºEnd piece 90º

End piece ZZ 71 NCorner ZZ 71 K

Page 16: Cargo Accessment

15

INTERNATIONAL STANDARD SPARE PARTS

CORNER AND ENDPIECES

Rubber Seals

Page 17: Cargo Accessment

16

INTERNATIONAL STANDARD SPARE PARTS

SCREW 11.00

Cleats

Page 18: Cargo Accessment

17

INTERNATIONAL STANDARD SPARE PARTS

SCREW 11.02

Cleats

Page 19: Cargo Accessment

18

INTERNATIONAL STANDARD SPARE PARTS

SCREW 11.03

Cleats

Page 20: Cargo Accessment

19

INTERNATIONAL STANDARD SPARE PARTS

FLUSH 11.50

Cleats

IMPA CODES:

Flush 11.50: 23322611.50.01: 23322711.50.02: 23322811.50.03: 23322911.50.04: 23323011.50.05: 23323111.50.06: 23323211.50.07: 23323311.50.08: 23323411.50.09: 233235

Page 21: Cargo Accessment

20

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING 13.00LENGTH 315mm.

Cleats

IMPA CODE:

QUICK ACTING 13:00: 233250

Page 22: Cargo Accessment

21

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING 13.01LENGTH 405mm.

Cleats

IMPA CODES:

QUICK ACTING 13.01: 23325113.00.01: 23325213.00.02: 23325313.00.03: 23325413.00.04: 23325513.00.05: 23325613.00.06 23325713.00.07: 23325813.00.08: 23325913.00.09: 23326013.01.01: 233261

Page 23: Cargo Accessment

22

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING 13.02

Cleats

IMPA CODES:

QUICK ACTING 13.02: 23326613.00.02 23325313.00.03 23325413.00.04 23325513.00.05 23325613.00.06 23325713.00.07 23325813.00.08 23325913.00.09 23326013.02.01 23326713.02.02 23326813.02.03 233269

Page 24: Cargo Accessment

23

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING 13.03LENGTH 440mm.

Cleats

Page 25: Cargo Accessment

24

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING 13.04LENGTH 285mm.

Cleats

Page 26: Cargo Accessment

25

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING QE-80BLENGTH 315mm.

Cleats

Page 27: Cargo Accessment

26

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING QE-81BLENGTH 180mm.

Cleats

Page 28: Cargo Accessment

27

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING NCG 10424LENGTH 275mm.

Cleats

Page 29: Cargo Accessment

28

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING NCG 10797LENGTH 265mm.

Cleats

Page 30: Cargo Accessment

29

INTERNATIONAL STANDARD SPARE PARTS

QUICK ACTING 110.00LENGTH 450mm.

Cleats

Page 31: Cargo Accessment

30

INTERNATIONAL STANDARD SPARE PARTS

WEDGE TYPE 12.00

Cleats

WEDGE TYPE 112.01

Page 32: Cargo Accessment

31

INTERNATIONAL STANDARD SPARE PARTS

WEDGE 91201/CS-5D

Cleats

Page 33: Cargo Accessment

32

INTERNATIONAL STANDARD SPARE PARTS

ECCENTRIC 20.00DIAMETER 200mm.

Wheels

ECCENTRIC 20.02DIAMETER 260mm.

IMPA CODE: 233271

IMPA CODES:

ECCENTRIC 20.02: 23327320.03: 23327420.00.01: 23327520.00.02: 23327620.00.03: 23327720.00.04: 23327820.00.05: 23327920.00.06: 23328020.00.07: 23328120.00.08: 23328220.00.09: 23328320.00.10: 23328420.02.02: 233285

Page 34: Cargo Accessment

33

INTERNATIONAL STANDARD SPARE PARTS

SPROCKET WHEELS

Wheels

Page 35: Cargo Accessment

34

INTERNATIONAL STANDARD SPARE PARTS

CHAIN GUIDE ROLLERS OFALL TYPES IN ALL SIZES

Wheels

Page 36: Cargo Accessment

35

INTERNATIONAL STANDARD SPARE PARTS

BALLANCING ROLLER 22.04DOUBLE LINK 2'5 TONS

Ballancing roller

BALLANCING ROLLER 22.05SINGLE LINK 2'5-4 TONS

IMPA CODES:

22.04: 23329120.00.09: 23328322.00.01: 23329222.00.03: 23329322.00.04: 23329422.00.05: 23329522.00.10: 23329622.06.06: 233297

IMPA CODES:

22.05: 23330120.00.09: 23328322.00.01: 23329222.00.03: 23329322.00.04: 23329422.00.05: 23329522.00.10: 23329622.07.06: 233302

Page 37: Cargo Accessment

36

INTERNATIONAL STANDARD SPARE PARTS

BALLANCING ROLLER 22.09DOUBLE ABOVE 4 TONS

Ballancing roller

BALLANCING ROLLER 22.10SINGLE ABOVE 4 TONS

IMPA CODES:

22.09: 23330620.00.09: 23328320.03.01: 23330722.03.03: 23330822.03.04: 23330922.03.05: 23331022.03.10: 23331122.09.06: 233312

IMPA CODES:

22.10: 23331620.00.09: 23328320.03.01: 23330722.03.03: 23330822.03.04: 23330922.03.05: 23331022.03.10: 23331122.10.06: 233317

Page 38: Cargo Accessment

37

INTERNATIONAL STANDARD SPARE PARTS

40.05 2'5-4 TONS

Shackle

40.06 2'5-4 TONS

IMPA CODE: 233331

IMPA CODE: 233332

Page 39: Cargo Accessment

38

INTERNATIONAL STANDARD SPARE PARTS

40.07 ABOVE 4 TONS

Shackle

40.08 ABOVE 4 TONS

IMPA CODE: 233333

IMPA CODE: 233334

Page 40: Cargo Accessment

39

INTERNATIONAL STANDARD SPARE PARTS

CHAIN COUPLING SK

Chain and connecting chains

Page 41: Cargo Accessment

40

INTERNATIONAL STANDARD SPARE PARTS

Chain and connecting chains

Page 42: Cargo Accessment

41

INTERNATIONAL STANDARD SPARE PARTS

40.50 LEFT HAND

Junction pieces

IMPA CODES:

40.50: 23332140.50.01: 23332240.50.03: 233323

Page 43: Cargo Accessment

42

INTERNATIONAL STANDARD SPARE PARTS

40.51 RIGHT HAND

Junction pieces

IMPA CODES:

40.51: 23332440.51.02: 23332540.51.04: 233326

Page 44: Cargo Accessment

43

INTERNATIONAL STANDARD SPARE PARTS

40.52 RIGHT HAND40.53 LEFT HAND

Junction pieces

Page 45: Cargo Accessment

44

INTERNATIONAL STANDARD SPARE PARTS

TYPE MB

Jacks

Page 46: Cargo Accessment

45

INTERNATIONAL STANDARD SPARE PARTS

TYPE KYB

Jacks

Page 47: Cargo Accessment

46

INTERNATIONAL STANDARD SPARE PARTS

TYPE AO-16000

Jacks

Page 48: Cargo Accessment

47

INTERNATIONAL STANDARD SPARE PARTS

M.G.01 (DV-1)

Drain valves

NCG 10548

Page 49: Cargo Accessment

48

INTERNATIONAL STANDARD SPARE PARTS

Hydraulic components

Page 50: Cargo Accessment

49

INTERNATIONAL STANDARD SPARE PARTS

Electric components

Page 51: Cargo Accessment

50

INTERNATIONAL STANDARD SPARE PARTS

Hatch Sealing Tapes

CanSeal-R is the premium quality roll type marinetape recommended for moderate weatherconditions. CanSeal-R is available in two widthsand combines quality and convenience at a veryeconomical price.

Application Instructions:

1. Surface must be clean and dry2. Remove loose rust and old tape3. A thin layer of old CanSeal® tape can be usedas a base for the new application4. Remove paper backing from CanSeal® rolland press into place, covering hatch joint5. Step firmly on the full length of tape6. Note: In cold weather conditions it is advisableto heat the hatch surface and adhesive sideof tape before application.

CanSeal is the heavy duty hatch sealing tapemanufactured in Canada with extraordinarystrength, adhesion and flexibility. At 5.0 mm thickand reinforced with specially treated fiberglassmesh, CanSeal Marine Tape ensures that yourcargo will arrive damage free.

Specifications:

- Heavy duty hatch cover tape in strips- High tack adhesive mastic with fiberglass mesh reinforcement and polyethylene over- Modern polymer modification process flexibility- Extreme high and low end temperature performance

Application Instructions:- Surface must be clean and dry- Remove loose rust and old tape- A thin layer of old CanSeal tape can be used as a base for the new application- Remove paper backing from CanSeal strip and press into place, covering hatch joint- Step firmly on the full length of tape- Note: In cold weather conditions it is advisable to heat the hatch surface and adhesive side of tape before application

Page 52: Cargo Accessment

51

INTERNATIONAL STANDARD SPARE PARTS

Anti-Corrosion Tapes and Coatings for Deck Equipment

PetroWrap Anti-Corrosion Tape

The PetroWrap Anti-Corrosion System has been developed for long term protection of metalsurfaces that are underground, underwater, or exposed - even in the most severe environments.It consists of a cold applied system of petrolatum-based PetroWrap Anti-Corrosion Tape,PetroWrap Primer, and, where contouring is necessary, PetroWrap Mastic. PetroWrap adheresto surfaces without heating, even on damp and/or indifferently prepared areas.

The System:

- PetroWrap Primer Paste is a preparatory primer that displaces moisture, pacifies oxides, and fills small irregularities that occur on the surface to be wrapped with PetroWrap Anti-Corrosion Tape.- PetroWrap Mastic is a cold applied filler which profiles areas to be tape wrapped by easing contours on pipe joints, flanges, bolts, and other irregular shapes to be wrapped with PetroWrap Anti-Corrosion Tape.- PetroWrap Anti-Corrosion Tape consists of a non-woven, stitch bonded, synthetic fabric which has been fully impregnated with neutral petrolatum based compounds and inert fillers.

Applications:

- Steel pipes, flanges and valves- Welded pipe joints- Cooling tower piping- Pipe crossings- Tank bases- Waterproofing & sealing- Fire protection- Pipe & sprinkler systems- Electrical connection boxes- Cable splices- Hydraulic pipes, valves & fittings- Marine pilings

Specifications:

- Can be applied on wire-brushed surfaces- Repels water, salt, alkalis and acids- Protects new or corroded surfaces- Temperature variances from -40º C to +65º C- Will not crack, peel or hardenNon-toxic and environmentally friendly (Meets AWWA C217 Standard)

Application Instructions:

- Remove all contaminants such as dirt, oil, scale and excessive moisture.- Brush Petrowrap® Primer A evenly over surface to displace remaining moisture and ensure proper adhesion.- Press Petrowrap® Mastic B into surface irregularities to eliminate air pockets.- Wrap Petrowrap® Tape C spirally around prepared surface using even tension. An overlap of 55% is recommended to assure total protection.

Page 53: Cargo Accessment

52

INTERNATIONAL STANDARD SPARE PARTS

Anti-Corrosion Tapes and Coatings for Deck Equipment

SteamKote HT Pipe Dressing

SteamKote HT Pipe Dressing is a high temperature coating formulated to protect againstcorrosion on steam pipes, valves and deck equipment. SteamKote forms a flexible ‘'skin’'when cured that will not crack, peel or harden even under harsh marine conditions.

SteamKote is the only pipe dressing that is non-flammable.

Packaging:

- SteamKote is available in 16.0 kg (35.5 lb.) pails

Specifications:

- Temperature Range: -40º C to +230º C- Colour: Maroon- Weight: 16 kg/pail (35.5 lbs/pail)- Dry to Touch: 8 hours- Thickness Application: 3-4 mm- Coverage: 0.5 m2/kg (2.5 ft2/lb)

Application Instructions:

- Surface must be ambient temperature- Remove loose rust and old tape- Be sure surface is dry- Apply SteamKote evenly using a spatula or rubber gloves- Allow 8 hours before resuming operation of equipment