cardinal early entry green concrete saws early entry green concrete saws for the lowest overall cost...
TRANSCRIPT
Cardinal Saws & Bladeswww.cardinalblades.com
*SOFF-CUT is a registered trademark of Soff-Cut International, Inc. © Cardinal Saws & Blades 2008
CARDINAL Early Entry Green Concrete SawsFor the lowest overall cost per cut in the industry
CARDINAL Early Entry Saws and unique Green Sawing Technique • eliminate random cracks • prevent unsightly raveling • minimize joint chipping and spalling
CARDINAL is innovator of the industry’s original early entry saw for cutting uncured green concreteCARDINAL developed the world’s first Green Machine Early Entry saw. And, continuing this tradition of innovation, CARDINAL has developed an early entry saw to handle any size job, indoors or outdoors.
The CARDINAL GM 450 Green Machine - The original light weight, available with a 4 ½ HP gas engine or a 1 ½ HP electric motor, delivers an immediate boost to your bottom line: • Equipped with patented FlatTrac wheels which permit the cutting operation to proceed within one to two hours after the finishing process is completed…your time on-the-jobsite is minimized • Has a low price tag yet outperforms more expensive Soff-Cut™ saws • Uses the lowest cost, fastest cutting CARDINAL DIAMOND Blades • Does not require expensive skid plates that can scratch and damage concrete surfaces and need to be replaced with every blade.
CARDINAL Bigfoot™ Early Entry Saw - Boasting a powerful 22 HP engine is the ideal early entry saw for those really big jobs: • Amazingly operator friendly despite its size • Achieves a cutting depth up to 4” for the life of the blade • Infinitely-variable self-propelled operation • Dust vacuum attachment that requires no modifications • Patented servo-controlled Bigfoot™ tracks eliminates surface scratching • Fitted for CARDINAL quality diamond blades for optimum life and speed of cut • Hydraulic motors for blade and drive wheels transfer maximum horsepower where it's needed – not wasted overcoming skid plate drag • Hydraulic operations eliminate V-Belts, which need replacement and can fail when you can least afford it
Cardinal Saws and Blades • Conshohocken, PA 19428Tel: 610.828.6606 • Fax: 610.828.7798; Toll Free – Tel: 1.888.503.3353 • Fax: 888.504.4434
Specifications for the CARDINAL Early Entry Saws
*SOFF-CUT is a registered trademark of Soff-Cut International, Inc. © Cardinal Saws & Blades 2008
Cardinal Saws and Blades • Conshohocken, PA 19428Tel: 610.828.6606 • Fax: 610.828.7798; Toll Free – Tel: 1.888.503.3353 • Fax: 888.504.4434
Physical/Mechanical SpecificationsDimensions
Weight
Blade raise/lower system
Guide system
Handle
Cutting distance from Wall
Blade SpecificationsBlade type
Blade rotation
Blade shaft speed
Cutting depth
Engine SpecificationsGas-powered engine
Recommended engine speed
Optional electric engine
Cylinder
Controls
Starting system
Fuel – Oil – Cooling – ExhaustFuel
Fuel capacity
Oil system
Oil
Oil capacity
Air filter
Muffler
Emissions
Cooling
Average Cutting Rates*Soft aggregates
Medium aggregates
Hard aggregates
*Estimates only. Speed will vary with job conditions and concrete mixtures.
The CARDINAL GM 450 Green MachineHandle collapsed – 16” width x 42” length Handle extended – 16” width x 49” length
100 pounds
Manual release and engagement near handle bar
Convenient manual front and rear guides
Telescoping type with infinitely adjustable length
3 ½”
6.5” diameter x .095” or .225” thick dry cut with patented Z Arbor
Counter clockwise, up cutting
5400 RPM
1” to 1 ½” (25 mm – 38 mm) regardless of blade wear (new blade cutting depth of 1 ¾”)
4 ½ HP (3.2 KW) Subaru Robin Model EX-13 vibration-free, air-cooled 4 cycle, single slant cylinder, overhead camshaft gasoline engine
3600 RPM
1 ½ HP, 115/230 volt, totally enclosed, fan cooled
Aluminum with cast iron liner
Engine mounted manual throttle, choke and fuel shut off levers, manual on/off switch
Manual recoil starter with automatic mechanical compression release and zero kick back
Minimum 87 octane rating unleaded gasoline
0.7 gallon (2.7 liters)
Oil alert with automatic shutdown sensor
SAE 10W-30 viscosity detergent automotive type with API service class of SE or higher grade
0.60 quart (0.57 liter)
Cyclonic type
Silent type 75 dbA, exhaust deflector, spark arrestor
Complies with EPA Phase 2 and CARB Tier II USA regulations
Air cooled with internal and external cooling fins
15 ft/min. (4.7 m/min.)
10 ft/min. (3.0 m/min.)
5 ft/min. (1.6 m/min.)
CARDINAL Bigfoot™ Early Entry SawHandle lowest position – 88”L x 32”W x 36-1/2”H, Handle highest position – 67”L x 32”W x 48-1/2”H
536 pounds (243 kg)
Electro-mechanical actuator with height display
Laser Line generator
6 position adjustable
3 ½” at full depth
13 ½” to 14” x 0.125”, up to 0.5” thick dry cut with patent Z-Arbor
Counter clockwise, up cutting
3200 to 3600 RPM
¼” to 4 ¼” (6.3 mm – 108 mm) regardless of blade wear (new blade cutting depth of 4 ½”)
22 HP (16.4 KW) Subaru Robin Model EH65, air-cooled, 4 cycle, V-Twin cylinder, overhead valve gasoline engine
3600 RPM
None
Aluminum with cast Iron liner
Engine mounted manual throttle, choke and manual on/off switch
Electric start with automatic decompression system
Minimum 87 octane rating unleaded gasoline
5 gallon (18.9 liter)
Oil alert with indicator light and automatic shutdown sensor
SAE 10W-30 viscosity detergent automotive type with API service class of SE or higher grade
1.64 Quart (1.55 liter)
Heavy Duty Air Cleaner
Low noise, exhaust deflector, spark arrestor
Complies with EPA Phase 2 and CARB tier II USA regulations
Air cooled with internal and external cooling fins
25-35 ft/min. (8-11.3 m/min.)
15-25 ft/min. (5-8 m/min.)
5-15 ft/min. (1.5-5 m/min.)