car wash application - banner...

2
Car Wash Application Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected] P/N 110710 Rev. B In-Bay Automatic/Rollover Using Sensors From Banner Engineering Teller/Coin Box and Menu Selection • “Wakes up” teller. • Doors open when correct code is entered, and previous vehicle has exited bay. • Verifies that vehicle has departed coin box area. T30U Ultrasonic Data Sheets: p/n 57438 Analog p/n 59200 Discrete Chemical Level Sensors monitor the level of the soap and chemical solutions. Low levels may trigger alarms or automatic refills from remote tanks. Exit Verification • Verifies that vehicle has exited car wash. • Signals dryers to turn off. • Prompts entry doors to open and admit next vehicle. S18 M-GAGE Data Sheet: p/n 114430 S18 M-GAGE Data Sheet: p/n 114430 Entry/Exit Doors • Verifies that a vehicle has either entered or exited the car wash. • Prevents doors from closing on the vehicle. • Dual sensors may be used: one inside and one outside. S18 M-GAGE Data Sheet: p/n 114430 Under-Carriage Wash Trigger • Detects presence of a vehicle while it is in the undercarriage wash zone. • Signals the pumps to start/stop undercarriage wash. Vehicle Profiling • Accurately determines vehicle front and back bumper position. • Allows gantry to travel minimal distance to ensure a quick, close wash. • Helps prevent vehicle damage. • Most powerful “burn-thru” sensor, without requiring an external amplifier. QS30EX/RX Data Sheet: p/n 115011 QS30EX/RX Data Sheet: p/n 115011

Upload: hamien

Post on 08-May-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Car Wash Application - Banner Engineeringinfo.bannerengineering.com/cs/groups/public/documents/literature/... · Car Wash Application Banner Engineering Corp., 9714 Tenth Ave. No.,

Car Wash Application

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]

P/N 110710 Rev. B

In-Bay Automatic/RolloverUsing Sensors From Banner Engineering

Teller/Coin Box and Menu Selection • “Wakes up” teller. • Doors open when correct

code is entered, and previous vehicle has exited bay.

• Verifies that vehicle has departed coin box area.

T30U UltrasonicData Sheets: p/n 57438 Analog p/n 59200 Discrete

Chemical Level • Sensors monitor the level

of the soap and chemical solutions.

• Low levels may trigger alarms or automatic refills from remote tanks.

Exit Verification • Verifies that vehicle has

exited car wash. • Signals dryers to turn off. • Prompts entry doors

to open and admit next vehicle.

S18 M-GAGEData Sheet: p/n 114430

Exit Verification • Verifies that vehicle has

exited car wash. • Signals dryers to turn off. • Prompts entry doors • Prompts entry doors

to open and admit next vehicle.

S18 M-GAGEData Sheet: p/n 114430

Entry/Exit Doors • Verifies that a vehicle has either

entered or exited the car wash. • Prevents doors from closing on

the vehicle. • Dual sensors may be used:

one inside and one outside.

S18 M-GAGEData Sheet: p/n 114430

Under-Carriage Wash Trigger • Detects presence of a vehicle while

it is in the undercarriage wash zone. • Signals the pumps to start/stop

undercarriage wash.

Vehicle Profiling • Accurately determines vehicle

front and back bumper position. • Allows gantry to travel minimal

distance to ensure a quick, close wash.

• Helps prevent vehicle damage. • Most powerful “burn-thru”

sensor, without requiring an external amplifier.

Vehicle Profiling

• Allows gantry to travel minimal

• Helps prevent vehicle damage. • Most powerful “

QS30EX/RX Data Sheet: p/n 115011

Under-Carriage Wash TriggerUnder-Carriage Wash TriggerUnder-Carriage Wash TriggerUnder-Carriage Wash Trigger • Detects presence of a vehicle while

it is in the undercarriage wash zone. • Signals the pumps to start/stop

QS30EX/RX Data Sheet: p/n 115011

Page 2: Car Wash Application - Banner Engineeringinfo.bannerengineering.com/cs/groups/public/documents/literature/... · Car Wash Application Banner Engineering Corp., 9714 Tenth Ave. No.,

Car Wash Application

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]

P/N 110710 Rev. B

S18 M-GAGEData Sheet: p/n 114430

Under-Carriage Wash Trigger • Detects presence of a

vehicle while it is in the undercarriage wash zone.

• Signals the pumps to start/stop undercarriage wash .

Entry/Exit Doors • Verifies that vehicle has either

entered or exited the car wash. • Prevents doors from closing on

the vehicle. • Dual sensors may be used:

one inside and one outside.

QS30EX/RX Data Sheet: p/n 115011

Soap Activation • Detects front of vehicle and triggers

soap/foam jets. • Remains active while vehicle is

blocking the sensor.

T30U UltrasonicData Sheets: p/n 57438 Analog p/n 59200 Discrete

Chemical Level • Sensors monitor the level

of the soap and chemical solutions.

• Low levels may trigger alarms or automatic refills from remote tanks.

Rinse Activation • Detects front of vehicle and

triggers rinse cycle. • Remains active while vehicle

is blocking the sensor.

QS30EX/RX Data Sheet: p/n 115011

Anti-Collision • Verifies that prior vehicle

has exited car wash. • Allows conveyor to

“eject” car from system to exit the wash.

S18 M-GAGEData Sheet: p/n 114430

QS30EX/RX Data Sheet: p/n 115011

Dryer Activation • Triggers dryers to turn on

and off. • May control dryer distance

from vehicle.

QS30Data Sheet:QS30QS30EX/REX/RXXQS30QS30

Conveyorized TunnelUsing Sensors From Banner Engineering

S18 M-GAGEData Sheet: p/n 114430

QS30QS30EX/REX/RXX

QS30EX/RX Data Sheet: p/n 115011

T30U Ultrasonic

“eject” car from system to exit the wash.

S18 M-GAGEData Sheet: