caps, plugs glides and protectors - cords · pdf filebeaded. tough and flexible, fc-series...

CAPS, PLUGS,GLIDES AND

PROTECTORS

20 Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1

Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 Fax: 416-242-6819 Email: [email protected]

SHORT CAPS

Part Numbers

Please use the following system for part numbers:

VSC [ID in decimals] X [Length in decimals].

For instance, a cap with ID of .062" and length of 3/8" would be

part number VSC 062X.375.

Stock Sizes

Most sizes stocked in 1/2", 1" and 1-1/2" lengths. Short Caps

are also available in almost any length in .062" increments with

a minimum length of .187". For sizes not shown here, please

see Standard Short Caps and Long Caps sections.

LONG CAPS

.062, .080, .093 X 3/8, 1/2, 3/4

.112 X 3/8, 1/2, 3/4, 1

.125, .137, .142, .156 X 1/2, 3/4, 1, 1-1/2

.172, .187, .207, .219 .234, .250,

.234, .250, .281, .313

.343, .375, .406, .437

.468, .500, .531, .562

.625, .687, .750, .812

.843, .875, .937, 1.000

1.062 X 1, 1-1/2

1.187, 1.375, 1.500 X 1-1/2

1.625, 1.687, 1.750,

2.000, 2.250, 2.500, 2.750,

3.000, 3.500, 4.000 X 1-3/4

Flexible vinyl Short Caps fit snugly

without cracking or splitting. They have

excellent insulation qualities and resist

weather, moisture and chemicals. Suitable

for almost any application including

colour coding, thread protectors, insula-

tors, seals, cable ends, electronic

wiring, tools, decorations, masks, etc.

Hundreds of stock sizes. Others can

be produced to your specs where quan-

tities warrant.

Also available in high temperature

resistant material. Hi-temp series has

been used at up to 440oF for extended

periods without breakdown. Minimum

quantities will apply.

*Use an undersized diameter for a tight fit.

For example, if your outside diameter is 1/2",

use a .437 cap.

Inside Diameters* X Inside Lengths Inside Diameters* X Inside Lengths

Stock colours: Black or red.

In-Stock ProgrammeThe following sizes can be ordered from stock in black or red. Non-stock colours: white, blue, green, orange, yellow and gray.

Vinyl-Dipped Caps and Protectors

Minimum order 1000.

Long Caps come in diameters ranging

from 3/16" through 3-1/2". Most sizes are

available in inside lengths up to 5-1/4", in

1/16" increments and many are available to

8" lengths. Excellent as pipe protectors,

grips, caps for boiler tubes, connectors and

cable end seals. Tough and durable, Long

Caps are also used in many masking

applications.

21Cords Canada Ltd., 62 Densley Avenue, Toronto, ON M6M 5E1


NOTE: We suggest a slightly

undersized diameter for a

tight fit due to the softness and

flexibility of these caps. For

example, if the OD is .500, use

a .437 Short Cap.

Inside Dia.

A

Max. Inside

Length B

Nominal Wall

Thickness C

.062

.080

.093

.112

.125

.137

.142

.151

.156

.172

.187

.207

.219

.234

.240

.250

.281

.313

.331

.343

.375

.406

.420

.437

.468

.500

.531

.562

.625

.687

.730

.750

.500

.500

.750

1.000

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

2.500

1.500

1.500

2.500

1.500

2.500

1.500

1.500

2.500

1.500

2.500

1.500

1.500

1.500

1.500

1.500

.028

.028

.028

.030

.033

.033

.033

.038

.038

.038

.038

.038

.038

.038

.038

.042

.042

.042

.042

.042

.042

.055

.055

.055

.055

.055

.060

.060

.060

.060

.060

.060

VSC 062X.500

VSC 080X.500

VSC 093X.750

VSC 112X1.000

VSC 125X1.500

VSC 137X1.500

VSC 142X1.500

VSC 151X1.500

VSC 156X1.500

VSC 172X1.500

VSC 187X1.500

VSC 207X1.500

VSC 219X1.500

VSC 234X1.500

VSC 240X1.500

VSC 250X1.500

VSC 281X2.500

VSC 313X1.500

VSC 331X1.500

VSC 343X2.500

VSC 375X1.500

VSC 406X2.500

VSC 420X1.500

VSC 437X1.500

VSC 468X2.500

VSC 500X1.500

VSC 531X2.500

VSC 562X1.500

VSC 625X1.500

VSC 687X1.500

VSC 730X1.500

VSC 750X1.500

Part No.

Inside Dia.

A

Max. Inside

Length B

Nominal Wall

Thickness C

.812

.843

.875

.937

.950

1.000

1.062

1.125

1.187

1.250

1.313

1.375

1.500

1.625

1.687

1.750

1.875

2.000

2.125

2.250

2.375

2.500

2.625

2.750

3.000

3.125

3.250

3.500

3.625

4.000

4.750

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

1.500

2.000

1.500

1.500

1.500

1.500

1.500

2.000

1.500

1.750

1.500

1.500

1.500

1.750

1.500

1.500

1.750

1.500

1.500

1.750

1.750

2.000

.060

.060

.060

.060

.060

.060

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

.065

VSC 812X1.500

VSC 843X1.500

VSC 875X1.500

VSC 937X1.500

VSC 950X1.500

VSC 1000X1.500

VSC 1062X1.500

VSC 1125X1.500

VSC 1187X1.500

VSC 1250X1.500

VSC 1313X1.500

VSC 1375X1.500

VSC 1500X1.500

VSC 1625X1.500

VSC 1687X1.500

VSC 1750X1.500

VSC 1875X2.000

VSC 2000X1.500

VSC 2125X1.750

VSC 2250X1.500

VSC 2375X1.500

VSC 2500X1.500

VSC 2625X1.750

VSC 2750X1.500

VSC 3000X1.500

VSC 3125X1.750

VSC 3250X1.500

VSC 3500X1.500

VSC 3625X1.750

VSC 4000X1.750

VSC 4750X2.000

Part No.

Standard colours: Black, red.

Also available in white, blue, green, orange, yellow, gray.

STANDARD SHORT CAPS

Vinyl-Dipped Caps and Protectors CONTINUED

A B

C



RECTANGULAR VINYL CLOSURESR-Caps (Rectangular Caps) offer the largest

variety of these normally hard-to-find caps in all

popular sizes. Flexible and easy to work with,

R-Caps are used on flat wire or bar stock as

decorators, lever covers, identifiers, or handle

grips. Choose the size, length and bright colour

you need.

FLANGE COVERS

E-Z TAB CAPS

Tough, resilient, vinyl ASA flange covers

protect critical flange faces and prevent interior

damage and contamination.

These covers fit most American Standard

Association, Navy and Military sizes and work

with most tubing, including Marman, flared and

beaded. Tough and flexible, FC-series covers

can also be used on joints and flanges. Fit

most tubing sizes up to 6-1/2". Both types are

available in bright yellow.

Tough, flexible vinyl caps with convenient

extra-long pull tab that makes for easy removal

and application. Go on snugly and stay put for a

superior seal. Can be used as a paint mask,

shipping cap or thread protector.





PLUS-PLUGSUsed as a cap or plug to keep out moisture or

contamination, patented Plus-Plugs fit most

popular threaded and NPT sizes. Flexible non-

shredding material assures Plus-Plugs will not

pop out during manufacturing or shipping.

Patented 360° pull tab assures quick and easy

removal. Most popular sizes shipped from stock.

The clear synthetic material will not

contaminate paint systems. These caps

can be reused numerous times at lower

temperatures and can be used in

extreme temperatures up to 600°F.

Perfect for hard-to-fit small diameters.

The V-shaped design allows one plug to

fit multiple ports. No flange masks the

surface immediately around the port

opening.

Neoprene plugs are best for one-

directional paint spray. Silicone plugs

are for continuous use at 500°F and

intermittent use at 600°F and are of

particular use for the high bake

temperatures found in powder coating

applications.

SILICONE CAPS

NEOPRENE AND SILICONE TAPERED PLUGS



Masking Products

Polyethylene Sleeving

In addition to the masking capabilities of our vinyl caps and plugs, we offer

a variety of specialized masking products.

Painting discs are heat-resistant,

adhesive-backed crepe paper that with-

stand bake temperatures of 300°F for

one hour. They leave a clean line, with

no “creeping” under edges and no

residue or stain from the adhesive.

Plating discs last for up to one hour

at 200°F, resist more chemicals than

similar vinyl discs and resist curling

and shrinking.

Powder coating discs are made

of extra thick polyester, making them

effective for up to one hour at 425°F.

Use this self-sticking tape to conveniently

mask irregular shapes. No mess, no heat,

no tools required and uses no adhesive.

FINISHING DISCS

SILICONE TAPE

Prevents damage to surfaces.

Identifies various grades. Can cover

irregular contours, from flat to round,

and will stay in place until pushed off.

Minimum order one roll. Sold in full rolls only.

Part No. Fits Diameter Colour Mini Coil (ft.) Maxi Coil (ft.)

NG .25

NG .50

NG 1.00

NG 1.50

NG 2.00

NG 2.50

NG 3.00

NG 4.00

NG 5.00

NG 6.00

NG 7.00

1/4 to 1/2

1/2 to 1

1 to 1-1/2

1-1/2 to 2

2 to 2-1/2

2-1/2 to 3

3 to 4

4 to 5

5 to 6

6 to 7

7 to 9

Yellow

Blue

Red

Black

White

Yellow

Green

Orange

Brown

Blue

Natural

650

550

340

180

160

120

90

70

60

50

40

3000

2750

1700

900

800

600

450

350

300

250

200



Tapered and flexible for easy installation and removal, these

provide a snug fit as either a cap or plug. Protect threads and

keep dirt and moisture out of pipes, valves, tubes, etc.

When using as a cap, “I” dimension should be at least .020"

per inch less than diameter to be capped. When using as a

plug, “L” dimension should be at least .020" per inch larger

than opening. Larger diameters may require more interference.

NIA 234-A

NIA 235-C

NIA 235-T

NIA 235-V

NIA 236-X

NIA 236-L

NIA 237-Y

NIA 229-Z

NIA 238-D

NIA 1193

NIA 239-E

NIA 181

NIA 240

NIA 189-C

NIA 189

NIA 189-2

NIA 241

NIA 241-S

NIA 188

NIA 242

NIA 242-2

NIA 243

NIA 191

NIA 203

NIA 710

1/8

1/4

3/8

1/8

1/4

3/8

1/2

5/16

3/8

29/64

3/8

15/32

15/32

1/2

9/16

9/16

11/16

19/32

5/8

21/32

11/16

11/16

23/32

3/4

3/4

25/32

27/32

27/32

7/8

7/8

15/16

55/64

13/32

13/32

11/32

11/32

3/8

13/32

13/32

3/8

13/32

29/32

13/32

13/32

13/32

5/16

15/32

15/32

15/32

11/32

1/2

17/32

17/32

1/2

17/32

19/32

3/16

.052

.110

.146

.150

.175

.205

.235

.267

.298

.375

.328

.358

.384

.415

.408

.436

.469

.490

.487

.518

.549

.578

.614

.627

.688

.117

.177

.211

.210

.239

.273

.303

.333

.364

.375

.395

.422

.448

.485

.484

.504

.544

.550

.569

.606

.634

.665

.691

.723

.743

.116

.174

.210

.209

.239

.267

.299

.331

.362

.437

.392

.422

.448

.477

.472

.500

.533

.552

.551

.580

.610

.642

.678

.691

.750

.181

.241

.275

.269

.303

.335

.367

.397

.428

.437

.459

.486

.512

.547

.548

.568

.608

.612

.633

.668

.695

.729

.755

.787

.805

Part No. Cap Plug G H I J K L

N.P.T. Sizes

Minimums available on request.Orange Low Density Polyethylene. Mil Spec (MIL-C-5501/7, MIL-C-52078).

Continued

Tapered Caps and Plugs



NIA 245

NIA 246

NIA 204

NIA 247

NIA 192-2-C

NIA 192-1

NIA 192-2

NIA 277

NIA 248

NIA 709

NIA 249-1

NIA 249-2

NIA 249

NIA 249-W

NIA 153

NIA 193

NIA 250-S

NIA 250-SW

NIA 250

NIA 1153

NIA 251

NIA 205

NIA 252

NIA 253-S

NIA 253

NIA 727

NIA 253-2

NIA 254-S

NIA 254

NIA 194

NIA 195-F

NIA 195-S

NIA 255

NIA 1972

NIA 196

NIA 206

NIA 911

NIA 256

NIA 806

NIA 257

NIA 258

NIA 258-S

NIA 259

NIA 260

NIA 261

1/2

3/4

1

1-1/4

1-1/4

1-1/2

3/4

3/4

3/4

1

1-1/4

1-1/2

1-1/2

1

1

1-1/16

1-1/8

1-1/8

1-1/8

1-1/8

1-5/32

1-5/32

1-5/16

1-1/4

1-1/4

1-9/32

1-7/16

1-5/16

1-13/32

1-7/16

1-43/64

1-7/16

1-3/8

1-1/2

1-1/2

1-1/2

1-5/8

1-5/8

1-3/4

1-49/64

1-3/4

1-3/4

1-25/32

1-7/8

1-7/8

1-15/16

2-1/32

2

2-5/32

2-3/8

2-1/8

2-13/64

2-1/4

2-1/4

2-19/32

2-5/16

2-7/16

2-19/32

19/32

19/32

21/32

5/8

21/32

3/4

21/32

1/2

23/32

7/8

1/2

1-1/32

3/4

3/4

25/32

25/32

21/32

21/32

3/4

9/16

3/4

27/32

3/4

17/32

3/4

51/64

15/16

7/8

3/4

3/4

25/32

5/8

3/4

3/4

25/32

1

43/64

1

3/4

1

1

3/8

3/4

1-1/32

1

.663

.688

.739

.755

.790

.805

.805

.878

.855

.940

.918

.890

.903

.918

.933

1.029

1.113

1.113

1.115

1.155

1.162

1.175

1.231

1.286

1.248

1.340

1.282

1.384

1.387

1.455

1.498

1.514

1.569

1.664

1.688

1.743

1.785

1.783

1.885

1.839

1.917

2.060

1.953

2.000

2.074

.761

.785

.848

.869

.894

.909

.909

.980

.980

.960

.985

1.030

1.028

1.047

1.080

1.155

1.223

1.222

1.222

1.190

1.290

1.300

1.295

1.401

1.401

1.420

1.450

1.537

1.537

1.538

1.620

1.628

1.686

1.794

1.818

1.874

1.895

1.936

2.000

2.014

2.069

2.076

2.083

2.174

2.265

.727

.752

.803

.819

.854

.869

.869

.942

.915

1.020

.980

.950

.967

.975

.997

1.093

1.180

1.175

1.179

1.276

1.226

1.233

1.292

1.350

1.312

1.435

1.344

1.447

1.451

1.519

1.560

1.574

1.633

1.720

1.752

1.807

1.865

1.847

1.950

1.903

1.981

2.100

2.017

2.070

2.136

.825

.849

.912

.933

.958

.973

.973

1.040

1.040

1.040

1.049

1.090

1.092

1.104

1.144

1.219

1.284

1.284

1.286

1.312

1.354

1.358

1.356

1.465

1.465

1.500

1.507

1.600

1.601

1.602

1.682

1.688

1.750

1.850

1.882

1.938

1.975

2.000

2.065

2.078

2.133

2.140

2.147

2.244

2.312


N.P.T. Sizes

Minimums available on request.Orange Low Density Polyethylene. Mil Spec (MIL-C-5501/7).

Continued

Tapered Caps and Plugs CONTINUED



NIA 1230

NIA 262

NIA 207

NIA 708

NIA 263

NIA 264

NIA 265

NIA 267

NIA 266

NIA 199

NIA 2156

2.400

2.408

2.464

2.464

2.604

2.645

2.650

2.690

2.750

2.790

2.788

2.280

2.129

2.300

2.300

2.396

2.482

2.311

2.561

2.457

2.641

2.655

2.336

2.344

2.400

2.383

2.540

2.581

2.586

2.626

2.686

2.728

2.728

3/4

1-1/32

1

3/4

1-5/32

21/32

1

3/4

1

25/32

1/2

2.216

2.065

2.236

2.220

2.332

2.418

2.247

2.497

2.393

2.579

2.595

2-51/64

2-17/32

2-5/8

2-21/32

2-13/16

2-25/32

2-25/32

2-7/8

2-7/8

2-31/32

2-31/32

2-1/2

2


N.P.T. Sizes

Minimums available on request.

NIA 862

NIA 268

NIA 208

NIA 2046

NIA 228

NIA 269

NIA 270

NIA 200

NIA 209

NIA 338

NIA 341

NIA 339

NIA 303

NIA 340

NIA 405

NIA 406

NIA 342

NIA 343

NIA 407

NIA 344

NIA 345

NIA 346

NIA 351

NIA 352

NIA 365

NIA 366

NIA 367

NIA 368

NIA 369

NIA 370

NIA 390

2.870

2.982

2.990

3.103

3.159

3.244

3.367

3.452

3.562

3.602

3.732

3.802

3.920

4.074

4.140

4.459

4.622

4.852

5.100

5.494

5.620

5.874

6.184

6.564

6.774

7.124

7.656

7.846

8.146

8.736

10.130

2.790

2.918

2.926

3.041

3.079

3.174

3.297

3.382

3.492

3.542

3.658

3.722

3.840

3.994

4.060

4.379

4.542

4.782

5.020

5.385

5.544

5.784

6.094

6.500

6.668

7.038

7.576

7.762

8.058

8.622

9.980

2.626

2.786

2.656

2.915

2.916

2.910

3.018

3.250

3.200

3.406

3.478

3.596

3.710

3.848

3.940

4.134

4.288

4.568

4.900

5.217

5.390

5.606

5.918

6.329

6.562

6.961

7.253

7.574

7.877

8.558

9.810

23/32

3/4

1

3/4

15/32

1

1

3/4

1-1/8

3/4

1

3/4

3/4

3/4

3/4

15/16

1

7/8

11/16

7/8

1

1

1

7/8

1-1/2

1

1

1

1

1-1/2

1

3-1/16

3-1/4

3-1/8

3-11/32

3-13/32

3-3/8

3-1/2

3-5/8

3-11/16

3-7/8

4

4

4-1/8

4-3/8

4-17/32

4-15/16

5

5-1/4

5-7/16

5-7/8

6-1/8

6-1/4

6-5/8

6-15/16

7-3/16

7-5/8

7-15/16

8-1/8

8-3/8

9-1/8

10-1/2

2-1/2

3

3-1/2

4

5

6

Minimums available on request.


N.P.T. Sizes

Tolerances on all decimal dimensions are ± .010 per inch (example: 2.500 ± .010 per inch = .025).

Tolerances for fractional dimensions are ± 1/32" per inch.

Heat distortion temperatures are as follows:

Low Density Polyethylene: 100-121°F (66 P.S.I.)

Medium Density Polyethylene: 120-165°F (66 P.S.I.)

High Density Polyethylene: 140-180°F (66 P.S.I.)

Orange Low Density Polyethylene. Mil Spec (MIL-C-5501/7).

Orange Low Density Polyethylene.

M

.040

.030

.032

.033

.045

.035

.035

.035

.035

.045

.040

.040

.040

.040

.040

.060

.045

.060

.060

.060

.040

.065

.045

.065

.065

.065

.065

.070

.070

.070

.070

2.706

2.850

2.720

2.975

2.996

2.980

3.088

3.320

3.270

3.466

3.552

3.676

3.790

3.928

4.020

4.214

4.368

4.638

4.980

5.326

5.470

5.696

6.008

6.398

6.668

7.048

7.338

7.658

7.968

8.668

9.950

3

3-1/2

4

5

6

Extra Large Tapered Caps & Plugs

Tapered Caps and Plugs CONTINUED



CGC .312

CGC .437

CGC .500

CGC .625

CGC .750

CGC .875

CGC .937

CGC .968

CGC 1.000

CGC 1.125

CGC 1.250

CGC 1.500

CGC 1.625

CGC 1.750

CGC 2.000

5/16

7/16

1/2

5/8

3/4

7/8

15/16

31/32

1

1-1/8

1-1/4

1-1/2

1-5/8

1-3/4

2

.413

.610

.643

.661

.646

.653

.578

.655

.655

.669

.578

.625

.578

.570

.563

Part No. Tube OD O/A Height

CGC .625H

CGC .750H

CGC .875H

CGC .968H

CGC 1.000H

5/8

3/4

7/8

31/32

1

1.112

1.240

1.368

1.375

1.483

Part No. Tube OD O/A Height

CGS .500

CGS .625

CGS .750

CGS 1.000

CGS 1.250

CGS 1.500

1/2

5/8

3/4

1

1-1/4

1-1/2

Part No. Tube OD

Standard colour: Black or white.

Other sizes and colours available.



Looking for a different kind of protector?Check out our Feet and Bumpers section.

Cap Glides

CGR 1X2

CGR 1X3

CGR 2X3

1

1

2

2

3

3

Part No. W L



ROUND CAP GLIDES–STANDARD

ROUND CAP GLIDES–HEAVY DUTY

SQUARE CAP GLIDES

RECTANGULAR CAP GLIDES

VINYL CANE TIPS–HEAVY DUTY

CANE .625

CANE .750

5/8

3/4

Part No. Tube OD

Standard colour: Gray.

SHALLOW TUBE CAPS

LONG TUBE CAPS



Shallow, medium and long Tube Caps fit

almost every size of tubing diameter with a

snug friction fit.

Closures are primarily used to cap fittings,

threaded studs, machined parts and tubes

used for packaging drill bits and tools.

NIA 210-A

NIA 211-B

NIA 211-L

NIA 212-C

NIA 212-S

NIA 213-D

NIA 213-R

NIA 214-J

NIA 214-E

NIA 274-G

NIA 215-F

NIA 216-H

NIA 217

NIA 218

NIA 219

NIA 219-S

NIA 220

NIA 981*

NIA 220-H

NIA 221

NIA 221-S

NIA 222

NIA 222-H

NIA 835

NIA 223

NIA 201-T†

NIA 201-S

NIA 201

NIA 748

NIA 1202

NIA 960

NIA 138

NIA 138-2

3/32

1/8

1/8

5/32

11/64

3/16

13/64

7/32

1/4

9/32

5/16

3/8

7/16

1/2

9/16

9/16

5/8

5/8

5/8

11/16

11/16

3/4

3/4

13/16

13/16

7/8

7/8

7/8

29/32

29/32

63/64

1

1

5/8

5/8

3/4

19/32

5/8

5/8

5/8

3/4

7/8

3/4

7/8

7/8

7/8

7/8

7/8

5/8

7/8

7/8

15/16

7/8

3/4

7/8

15/16

11/16

7/8

5/8

5/8

7/8

3/4

7/8

1

3/4

1

Part No.

To Fit

OD L

NIA 448

NIA 224

NIA 289

NIA 1783

NIA 760

NIA 225

NIA 290

NIA 291

NIA 291-2

NIA 1008

NIA 1008-1

NIA 1699

NIA 226

NIA 327

NIA 230

NIA 1365

NIA 227

NIA 372

NIA 374

NIA 232

NIA 387

NIA 373

NIA 1528

NIA 1563

NIA 1521

NIA 2215

NIA 1540

NIA 377

NIA 1400

NIA 1363

NIA 324-3

1-1/16

1-1/8

1-1/4

1-5/16

1-3/8

1-3/8

1-1/2

1-5/8

1-23/32

1-3/4

1-3/4

1-7/8

2

2-1/8

2-1/4

2-1/4

2-1/2

2-19/32

2-5/8

2-3/4

3

3-1/8

3-1/4

3-7/16

3-1/2

3-33/64

4

4-1/8

4-13/16

4-55/64

8

1

7/8

1

1

5/8

1

1

1

1

7/8

1

1

1

7/8

7/8

1

7/8

1

1

1

1

1-3/8

1

1

1

2

1-1/8

1-1/2

41/64

1

2-1/4

Part No.

To Fit

OD L

NIA 213-S

NIA 214-S

NIA 1805

NIA 216-T

NIA 773

NIA 1031

NIA 218-S

NIA 838

NIA 222-S

NIA 1784

NIA 2003

NIA 1364

NIA 289-S

NIA 985

NIA 1025

3/16

1/4

5/16

3/8

7/16

7/16

1/2

23/32

3/4

1

1

1

1-1/4

1-3/8

2-1/8

15/32

1/2

3/8

15/32

7/32

1/2

1/2

15/32

3/8

1/2

1/2

5/8

1/2

11/32

1/2

Part No.

To Fit

OD L

NIA 214-L

NIA 216-L

NIA 1030

NIA 217-L

NIA 1834

NIA 220-U

NIA 222-L

NIA 201-M

NIA 138-L

NIA 289-M

NIA 289-L

NIA 428

NIA 428-2

NIA 290-L

NIA 291-L

NIA 291-3

NIA 226-L

15/64

3/8

27/64

7/16

5/8

5/8

3/4

7/8

1

1-1/4

1-1/4

1-3/8

1-3/8

1-1/2

1-5/8

1-27/32

2

1-1/8

1-1/8

1-1/4

1-1/2

2-1/2

1-1/2

2-15/32

1-3/4

1-3/4

1-1/2

1-3/4

1-1/2

1-19/32

1-3/4

1-1/4

1-7/32

1-1/2

Part No.

To Fit

OD L

Minimums on request.Orange Low Density Polyethylene.

Mil Spec (MIL-C-5501/9).





Tolerances on all decimal dimensions are ± .010 per inch

(example: 2.500 ± .010 per inch = .025).






Long Tube Caps

* 2 internal rings.

† .067 wall thickness.

Tube Caps

TUBE CAPS



Fits

Hole

Size A B C D E FPart No.

NIA 411-2

NIA 412-2

NIA 438-2

NIA 413-2

NIA 465-2

NIA 414-2

NIA 415-2

NIA 418-2

NIA 416-2

NIA 417-2

NIA 419-2

NIA 421-2

1/2

3/4

7/8

1

1-3/32

1-1/4

1-1/2

1-5/8

1-3/4

2

2-1/2

3

7/8

1-5/32

1-1/4

1-3/8

1-7/16

1-5/8

1-7/8

2

2-1/8

2-3/8

3

3-1/2

.538

.800

.915

1.050

1.125

1.308

1.550

1.675

1.800

2.050

2.570

3.060

.500

.750

.875

1.000

1.090

1.250

1.500

1.625

1.750

2.000

2.500

3.000

.430

.660

.795

.930

1.000

1.170

1.420

1.540

1.670

1.910

2.400

2.910

.125

.170

.155

.160

.160

.140

.150

.160

.160

.180

.160

.190

.285

.360

.350

.350

.350

.350

.370

.350

.350

.360

.380

.410

Type 1: Flush front.

Type 2: Recessed front.

Snap-In Plugs are tough, flexible

“finishing” plugs used extensively in all

sheet metal work to seal access holes.

Insertion is a snap. Thanks to an inter-

nal bead, they hold on tight when the

handling gets tough.

Snap-In Plugs are used by auto

rustproofers, on refrigeration units,

water heaters, steel doors, paint cans,

lawn mowers–even piggy banks!

These can be hot stamped with your

logo to provide a unique and attractive

solution for product identification. Call

us for a quote on hot stamping.

Minimums available on request. Black Low Density Polyethylene.

Tolerances on all decimal dimensions are ± .010 per inch (example: 2.500 ± .010 per inch = .025).






Flush Front

Snap-In PlugsTYPE 1 (Flush – fits 14-26 gauge material)

TYPE 2 (Recessed)

NIA 659*

NIA 659-1

NIA 411

NIA 430

NIA 430-S

NIA 437

NIA 412

NIA 438

NIA 413

NIA 465

NIA 457

NIA 414

NIA 415

NIA 416

NIA 417

NIA 419

NIA 472

NIA 421

NIA 425*

NIA 425-S*

3/8

3/8

1/2

5/8

5/8

11/16

3/4

7/8

1

1-3/32

1-3/16

1-1/4

1-1/2

1-3/4

2

2-1/2

2-5/8

3

4

4

3/4

3/4

7/8

1-1/16

13/16

1-1/16

1

1-5/32

1-7/16

1-5/16

1-9/16

1-5/8

1-7/8

2-1/8

2-7/16

3

3-1/8

3-3/8

4-1/2

4-1/2

.410

.410

.540

.675

.675

.710

.790

.910

1.070

1.150

1.240

1.290

1.540

1.790

2.080

2.580

2.675

3.060

4.100

4.100

.375

.375

.500

.615

.625

.680

.750

.875

1.010

1.090

1.200

1.250

1.500

1.750

2.020

2.520

2.645

3.000

4.020

4.020

.310

.305

.400

.500

.545

.556

.625

.750

.875

1.000

1.050

1.125

1.400

1.620

1.875

2.375

2.520

2.850

3.900

3.900

.090

.090

.110

.090

.140

.094

.100

.100

.110

.125

.100

.110

.110

.105

.100

.100

.100

.110

.150

.090

.060

.125

.090

.100

.080

.094

.090

.090

.094

.080

.100

.090

.090

.094

.094

.094

.094

.090

.080

.340

Fits

Hole

Size A B C D E FPart No.



The 1" to 6" polyethylene paper tube

plugs come with convenient fingerpull

tabs (one or two, depending on size),

and are 1/2" deep.

The 8" to 12" plugs have a wide

flange for easy removal from tubes and

are 1-1/4" deep.

TP 1000

TP 1250

TP 1375

TP 1500

TP 1750

TP 2000

TP 2250

TP 2500

1

1-1/4

1-3/8

1-1/2

1-3/4

2

2-1/4

2-1/2

Part No. Fits Tube ID Part No. Fits Tube ID

TP 2750

TP 3000

TP 3500

TP 4000

TP 5000

TP 6000

TP 8000

TP 10000

TP 12000

2-3/4

3

3-1/2

4

5

6

8

10

12

Knock-Out Seals

Paper Tube Plugs

Part No. Trade Size

Mounting Hole

Diameter

A

Head Diameter

B

Overall Height

Max. Chassis

Thickness

KOS1/2

KOS3/4

KOS1

KOS1-1/4

KOS1-1/2

KOS2

1/2

3/4

1

1-1/4

1-1/2

2

.875

1.093

1.375

1.750

2.000

2.500

1.015

1.218

1.500

1.906

2.140

2.750

.453

.453

.453

.453

.453

.750

.125

.125

.125

.125

.125

.250

These nylon electrical knock-out seals are moulded

in gray colour to resemble galvanized steel and lock

firmly in boxes up to 1/4". They install quickly with fin-

gertip pressure (no tools required).

Standard colour: Gray.

Standard colour: Natural white (1" to 6")

or black HDPE (8" to 12").

Other colours available for 1" to 6" sizes

(minimum order 10,000).



INSULATION PLUGSPRY OUT PLUGS

ALSO AVAILABLE:

Use when space inside the panel is a

problem. Shorty plugs have a limited

(1/8") protrusion inside the panel. They

have a matte finish head tapering to a

thin edge for a smooth finished look.

Quickly and easily installed.

Part No.

Mounting

Hole Diameter

Head

Thickness

A

Head

Diameter

B

Overall

Height

Maximum

Chassis

Thickness

SP218

SP281

SP312

SP343

SP375

SP406

SP437

SP468

SP500

SP531

SP593

SP625

SP750

SP781

SP875

SP1000*

.218

.281

.312

.343

.375

.406

.437

.468

.500

.531

.593

.625

.750

.781

.875

1.000 +010/-.000

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

9/32

11/32

3/8

13/32

15/32

15/32

17/32

17/32

37/64

19/32

11/16

23/32

27/32

57/64

31/32

1-13/64

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

1/4

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

.062

Minimum order 1000.

Standard colour: Black. Other colours available at premium charge if quantities are sufficient.

Shorty Plugs

*UL and CSA approvals pending.



Close unneeded chassis holes. Moulded of

black nylon, these feature a convex, matte finish

head that tapers to a thin edge. Gives your product

an uninterrupted, completed surface you can even

paint over. No tools required. Just a quick push

locks these firmly into chassis up to 1/4" thick.

DP187

DP250

DP312

DP375

DP437

DP500

DP562

DP625

DP687

DP750

DP812

DP875

DP1000

DP1093

DP1187

DP1250

DP1375

DP1500

DP1750

DP2000

DP2.093

DP2.25

DP2.5

DP3.0

DP3.375

DP3.5

DP4.0

DP5.0

DP6.0

.187

.250

.312

.375

.437

.500

.562

.625

.687

.750

.812

.875

1.000

1.093*

1.187

1.250

1.375

1.500

1.750

2.000

2.093**

2.250

2.500

3.000

3.375

3.500

4.000

5.000

6.000

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

1/16

5/64

7/64

7/64

7/64

7/64

7/64

7/64

7/64

7/64

7/64

1/4

5/16

3/8

15/32

17/32

37/64

21/32

23/32

25/32

59/64

57/64

1-1/64

1-13/64

1-7/32

1-5/16

1-3/8

1-1/2

1-43/64

1-29/32

2-9/64

2-1/4

2-27/64

2-23/32

3-11/64

3-21/32

3-21/32

4-5/32

5-7/32

6-7/32

15/64

5/16

5/16

13/32

13/32

13/32

13/32

13/32

13/32

13/32

13/32

29/64

29/64

29/64

29/64

29/64

29/64

29/64

29/64

15/32

3/4

3/4

3/4

3/4

3/4

3/4

3/4

25/32

25/32

.062

.062

.062

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.250

.250

.250

.250

.250

.250

.250

.250

.250

1,000

1,000

1,000

1,000

1,000

1,000

1,000

1,000

1,000

1,000

1,000

1,000

500

500

500

500

500

500

300

300

200

200

100

100

100

100

50

150

130

Part No.

Mounting

Hole Diameter

Head

Thickness

A

Head

Diameter

B

Overall

Height

Maximum

Chassis

Thickness

Minimum

Order

Qty.

Standard colour: Black. Other colours available at premium charge if quantities are sufficient.

* can be used up to 1.125 diameter.

** can be used up to 2.125 diameter.

Dome Plugs



Got a strain relief hole where it shouldn’t be? Don’t

start again; just fill it with a double “D” plug. These work

for other chorded or “DD” holes as well (holes punched

or moulded with two opposing flats). The convex, matte

finish head tapers to a thin edge, giving your chassis a

completed look. All sizes have a head thickness of

1/16", and fit a maximum chassis thickness of .125".

.437

.500

.562

.625

.750

.875

.390

.445

.530

.550

.625

.770

17/32

37/64

21/32

23/32

59/64

1-1/64

13/32

13/32

13/32

13/32

13/32

29/64

DD437-390

DD500-445

DD562-530

DD625-550

DD750-625

DD875-770

Part No.

Mounting

Hole Diameter

D

To Prevent

Rotation

A

Head

Diameter

B

Overall

Height

Minimum order 1000.

DOUBLE “D”

Dome Plugs CONTINUED

Closes unneeded panel holes and electrical knock-outs.

All-nylon construction. Convex matte finish head tapers to a

thin edge. (Approximate head thickness .063".)

Locking fingers ‘snap’ into holes with fingertip pressure

for quick and easy installation.

Withstands a push-back force of 35 pounds.

.500

.625

.750

.875

1.000

1.093 -1.125

1.187

1.250

1.375

1.500

1.750

2.000

.578

.718

.921

1.015

1.203

1.218

1.312

1.375

1.500

1.671

1.906

2.170

.562

.562

.562

.562

.562

.562

.562

.562

.562

.562

.562

.580

.250

.250

.250

.250

.250

.250

.250

.250

.250

.250

.250

.250

DPT500

DPT625

DPT750

DPT875

DPT1000

DPT1093

DPT1187

DPT1250

DPT1375

DPT1500

DPT1750

DPT2000

Part No.

Mounting

Hole Diameter

A

Head

Diameter

B

Overall

Height

Maximum

Chassis

Thickness

THICKER PANEL DOME

Standard Colour: Black or White.

Vent Plugs

PLUG ASSORTMENT LABKIT

Part No.

Mounting Hole

Diameter

A

Head

Diameter

B

Overall

Height

Maximum

Chassis

Thickness

No. of

Holes

VP500

VP625

VP750

VP875

VP1000

VP1093

VP1187

VP1250

SVP1250

VP1375

VP1500

VP1750

VP2000

VP2.5

VP3.0

VP3.5

VP4.0

.500

.625

.750

.875

1.000

1.093-1.125

1.187

1.250

1.250

1.375

1.500

1.750

2.000

2.500

3.000

3.500

4.000

.578

.734

.906

1.015

1.203

1.218

1.312

1.375

1.375

1.500

1.671

1.906

2.140

2.718

3.171

3.656

4.156

.406

.406

.406

.453

.453

.453

.453

.453

.453

.453

.453

.453

.468

.750

.750

.750

.750

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.125

.250

.250

.250

.250

4

5

8

9

9

9

10

10

4

11

13

13

19

19

26

38

48

Permits the passage of air for heat dissipation and

ventilation.

Convex, matte finish head tapers to a thin edge.

Locks firmly into chassis up to 1/4" thick.

Quick and easy installation with only fingertip pressure.

Standard colour: Black. White and other colours available at premium charge if quantities are sufficient.



Our labkits are perfect for product design departments, experimental labs and

for all prototype work.

LABKIT 3 is an assortment of plugs with approximately the following quantities

and part numbers. (Content may vary.)

25 each DP250, DP312, POP375, POP250, G437, G500, GPT500

15 each GPT625, DPT625

10 each DPT750, SP750, WP750

8 each SP875

5 each WP1000

4 each VP1000, VPT1000, DP1250

3 each DP1500

FLAT HEAD – 14-23 gauge

UC 1/2

UC 5/8

UC 3/4

UC 7/8

UC 1

UC 1X*

1/2

5/8

3/4

7/8

1

1

*10-14 gauge.

SQUARE

UT 3/4

UT 7/8

UT 1

NIA SQ 8-1-1EAE*

UT 1-1/4

3/4

7/8

1

1

1-1/4

*10-14 gauge.

BALL HEAD

UB 3/4

UB 7/8

UB 31/32

UB 1

3/4

7/8

31/32

1

UP 1 X 2

UP 1-1/2 X 3

UP 2 X 3-1/2

1 X 2

1-1/2 X 3

2 X 3-1/2

Part No. Tube OD

RECTANGULAR

UC 1-1/8

UC 1-1/4

UC 1-1/2

UC 1-3/4

UC 2

1-1/8

1-1/4

1-1/2

1-3/4

2

UB 1-1/4

UB 1-1/2

UB 1-3/4

1-1/4

1-1/2

1-3/4

UT 1-1/2

UT 2

UT 2X*

UT 2-1/2

1-1/2

2

2

2-1/2

Part No. Tube OD Part No. Tube OD



Universal Plug Glides

*10-14 gauge.





Plug glides are made of polyethyl-

ene. Also available in ABS by special

request.

As with most parts we offer, we

can also have glides designed to

your custom specifications.

PGC .625-D

PGC .750

PGC .875

PGC 1.000

PGC 1.125

PGC 1.250

5/8

3/4

7/8

1

1-1/8

1-1/4

16-18

16-18

16-18

16-18

16-18

16-18

Part No. Size Gauge

PGC 1.375

PGC 1.500

PGC 1.750

PGC 2.000

PGC 2.250

PGC 2.500

1-3/8

1-1/2

1-3/4

2

2-1/4

2-1/2

16

16-18

16-18

16-18

16

16 or 18

Part No. Size Gauge

PGA .750

PGA .875

3/4

7/8

16-18

16-18

Part No. Size Gauge

PGS .500

PGS .625

PGS .750

PGS .875

PGS 1.000

PGS 1.250

PGS 1.500

PGS 2.000

1/2

5/8

3/4

7/8

1

1-1/4

1-1/2

2

16-18

16-18

16-18

16-18

16-18

16-18

12, 14-16 or 18

16-18

Part No. Size Gauge

PGR .500X1

PGR .500X1.5

PGR .750X1.5

PGR 1.000X2

1/2 X 1

1/2 X 1-1/2

3/4 X 1-1/2

1 X 2

16-18

16-18

16-18

16-18

Part No. Size Gauge

Standard Colour: Black.

Also available: White.

Other sizes and gauges available for all styles.

Other styles also available.

Plug Glides

D is slightly domed.

ROUND

SQUARE

RECTANGULAR

ANGLED SQUARE

Ask about ourBall Glides

and Oval Glides.



Pipe Thread ProtectorsBoth open end and closed end protectors are made to completely

cover the threads of conduit pipe.

Smooth sided caps are designed to work well with automatic vibrating

feeders; they use an internal bead to hold on tight when the handling gets

rough.

Major producers of iron, steel and aluminum pipe and tubing use these

unique protectors for safer, damage-free shipments.

Ribbed, threaded caps provide durable protection for male

threads on standard threaded studs and fittings.

Because of their excellent seal, they are a popular mask

for painting and plating.

Threaded Square Head - hollow threaded plug prevents damage to tapped

holes and provides low-cost protection (less than metal) during low pressure

testing, shipping or in-plant handling. Durable plug is easily tightened with fingers

or wrench.

Flanged Square Head - hollow threaded plug locks into position for an extra-

tight seal due to flanged sealing surface and cannot be forced through opening.

Plug will withstand testing at a higher pressure than standard threaded plug and

offers low cost protection against damage of tapped holes.

Hexagonal Socket - a solid threaded plug offering exceptional strength as a

temporary or permanent closure. Hex socket accepts standard Allen wrench

sizes for easy tightening.

STANDARD THREADED CAPS

THREADED PIPE PLUGS

caps, plugs glides and protectors - cords · pdf filebeaded. tough and flexible, fc-series...

Documents