Capacitor BanksProduct Datasheet

2Evans Capacitor Company72 Boyd Avenue East Providence RI 02914 USA • 401.435.3555 • Fax: 401.435.3558

Product OverviewEvanscap capacitor bank assemblies are available with either 3 or 6 internal capacitors. The internal capacitors shall utilize sintered tantalum anodes and ruthenium oxide coated cathodes operating in aqueous electrolyte. The components shall be potted and hermetically sealed in a welded tantalum case with a glass-to-metal anode terminal seal. The capacitors are potted in an aluminum housing with a screw-attached cover. All required bleed resistors are included.

Rated Voltage Range 10VDC to 700VDC

Capacitance Range 1,100uF to 900,000uF

Life (@85ºC) Contact Factory for Informtaion

Capacitor Banks

Electrical Specifications

Mechanical SpecificationsTest Method Condition RemarksShock MIL-STD-202 METHOD 213 G Tested for 11ms at 50g

Vibration MIL-STD-202 METHOD 204 D 12 sweeps/axis, 20g peakMIL-STD-202 METHOD 214 I, Letter D 1.5 hours/axis, 12g peak

Moisture Resistance MIL-STD-202 METHOD 106 6V Polarity

Solderability To ANSI J-STD-002Operating Temperature Range -55ºC to +85ºCStorage Temperature Range -62ºC to +130ºC

3Evans Capacitor Company72 Boyd Avenue East Providence RI 02914 USA • 401.435.3555 • Fax: 401.435.3558

Capacitor Banks

3STHQ3 Wiring Schematic

3PTHQ3 Wiring Schematic

6PTHQ3 Wiring Schematic

6STHQ3 Wiring Schematic

Page 1 of 4 3PTHQ Rev. C.

Evans Capacitor Company www.evanscap.com

Product Specification

3PTHQ3 HYBRID® CAPACITOR

NUMBER 3PTHQ3 ISSUE 01 REVISION C (ECO13-022) DATE 8/15/13

1.0 Scope

This document contains specific electrical, mechanical, and environmental requirements and specifications for the 3PTHQ3 Hybrid® capacitor bank.

2.0 Construction 2.1 General

The three internal capacitors of the capacitor bank shall utilize sintered tantalum anodes and ruthenium oxide coated cathodes operating in aqueous electrolyte. The components shall be hermetically sealed in a welded tantalum case with a glass-to-metal anode terminal seal. The capacitors are potted in an aluminum housing with a screw-attached cover.

Figure 1: 3PTHQ3 capacitor bank schematic

4Evans Capacitor Company72 Boyd Avenue East Providence RI 02914 USA • 401.435.3555 • Fax: 401.435.3558

2D Drawing - 6 Pack Assembly

Capacitor Banks

2D Drawing - 3 Pack Assembly