canon eos rebel t4i flash replacement - the-eye.eu guides/canon eos rebel t4i...to reassemble your...
TRANSCRIPT
Canon EOS Rebel T4i Flash ReplacementIn this guide, users will be able to take apart the flash piece of the camera.
Written By: Jordan Rabold
Canon EOS Rebel T4i Flash Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5
INTRODUCTION
This guide details how to replace the flash bulb of this camera.
TOOLS:Tweezers (1)
Flush Wire Cutters (1)
Phillips #000 Screwdriver (1)
Canon EOS Rebel T4i Flash Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5
Step 1 — Battery
Locate the battery cover at thebottom of the camera.
Pull down on the black tab to openthe cover.
Step 2
Push the grey tab on the right side ofthe battery.
Remove the battery from the slot.
Canon EOS Rebel T4i Flash Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5
Step 3 — Flash
Using the Phillips screwdriver,unscrew the two 4.9mm Phillipshead screws which are locatedunderneath the flash.
Step 4
Remove the covering.
Canon EOS Rebel T4i Flash Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2017-06-18 02:37:17 AM.
Step 5
Use the tweezers to remove theexcess glue around the wiring. Thiswill allow you to cut the wire andremove the light in the next step.
Step 6
Use the wire cutters to cut the wiringconnected to the flash.
Canon EOS Rebel T4i Flash Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5