canon ae-1 tripod mount replacement · step 1 — tripod mount turn the camera so the bottom of the...
TRANSCRIPT
Canon AE-1 Tripod Mount ReplacementReplacing camera tripod mount
Written By: Ben Barber
Canon AE-1 Tripod Mount Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4
INTRODUCTION
Over time the tripod mount can become damaged and the tripod will no longer thread into thecamera. This guide will explain how to replace the tripod mount.
TOOLS:Phillips #00 Screwdriver (1)
PARTS:Replacement tripod mount (1)
Canon AE-1 Tripod Mount Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 4
Step 1 — Tripod Mount
Turn the camera so the bottom ofthe camera is facing up.
Remove the two Phillips screwsfrom the bottom cover using thePhillips #00 Screwdriver.
Step 2
Lift and remove the bottom coverfrom the camera.
Canon AE-1 Tripod Mount Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2017-06-21 09:23:39 PM.
Step 3
Remove the three screws securingthe tripod mount using the Phillips#00 Screwdriver.
Step 4
Lift and remove the tripod mountfrom the camera.
Canon AE-1 Tripod Mount Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 4