canoe/canalyzer new features...2017/04/10 · u new analysis window “timeline” u timely base,...
TRANSCRIPT
![Page 1: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/1.jpg)
V1.0 | 2018-04-10
Version 11.0
CANoe/CANalyzer New Features
![Page 2: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/2.jpg)
2
u Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 3: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/3.jpg)
3
u Release date 11.0
u 2018-04-20
u Supported bus systems
u CAN & CAN FD, LIN, FlexRay, MOST, J1708, Ethernet, WLAN
u Options
u AMD/XCP – CANoe
u Car2x
u Scope for CAN & CAN FD, LIN, FlexRay
u J1939, CANopen, J1587
u ISO11783 - CANoe
u Aerospace options: AFDX®, A429, CANaero
u Sensor: PSI5, SENT, SPI - CANoe
Overview
Release Information
![Page 4: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/4.jpg)
4
Release Information
u General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 5: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/5.jpg)
5
Main Benefits
General
u Communication concept to address service oriented architectures (SOA) and adaptive AUTOSAR
u Security Support – TLS/SecOC support
u Support for Multi Tasking Simulink models – emulation of a RT OS scheduling
u Offline VT System – setup and configuration of VT systems without physical connection
u VH6501 CAN disturbance interface – graphical panels for trigger and sequence configuration
u New licensing and installation concept – MSI compliant installer, tool characteristics determined by license only
![Page 6: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/6.jpg)
6
Setup and Licensing
General
u Complete new installation program
![Page 7: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/7.jpg)
7
u Complete new installation program
u Better support for software deployment> Full MSI compliant
> Dedicated setup for CANoe and CANalyzer
u Simple selection/deselection of additional demos or editors (e. g. ODX Studio, CANdela Studio, …)
u Licensing: Program variant and options depends only on the licenses
u Easy upgrade, side grade without the need for reinstall
u Full support of the new Vector licensing
Setup and Licensing
General
![Page 8: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/8.jpg)
8
u Support for service oriented architectures (SOA)
u Import and merging of multiple extracts
u Support of complex service interfaces
u Fields, Events, Methods, complex Data Types
u AUTOSAR Adaptive> R17-10 (11.0)
> R18-03 (11.0 SPx)
u Communication Object Editor
u Complex data types
u Encodings
u Signal groups
u vTESTstudio support
Communication Concept
General
![Page 9: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/9.jpg)
9
u Bindings
u Ethernet SOME/IP> Extended serialization of complex data types
> Fields
> IPv4/IPv6
> Simplified configuration interface
u CAN FD (11.0 SPx)> PDU based communication model
> Container PDU Support
u Model Generation (11.0 SPx)
u Ethernet + CAN
u NM, E2E, SecOC and fault injection
u Targeted customers
u VAG adaptive use cases
u DAG STAR 3 architecture
Communication Concept
General
More info:
DE – https://vector.com/vi_canoe_de.html#!vi_canoe_com_model_iframe_de.html
EN - https://vector.com/vi_canoe_en.html#!vi_canoe_com_model_iframe_en.html
![Page 10: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/10.jpg)
10
Interactive Generator for AUTOSAR PDUs (11.0 SPx)
u Supports ASR PDUs for CAN, FlexRay and Ethernet
u Support of ASR4.x for statically mapped PDUs (GM and BMW) and PDU streaming (DAG)
u Support of new communication concept as well as classic
AUTOSAR
General
![Page 11: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/11.jpg)
11
Security
General
u Security Manager & CANoe
u System variable support for Freshness start values
u Automatic download of Security Manager modules to RT systems (VN89xx…)
u Low level crypto functions (AES128 CBC ECB, CMAC, SHA256, SHA512) in CAPL
u Support of VLAN Ids at secured PDUs and Freshness messages
u TLS support (with SP2) for Ethernet
u Security Manager
u Copy to clipboard function for output window
u New AUTOSAR SecOC Template with JASPAR Freshness Manager
u OEM Security Packages
u Current available security support for DAG, Toyota, Nissan, VAG
u Further OEMS are under development / in planning
![Page 12: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/12.jpg)
12
Distribute CANoe to multiple computers
Multi CANoe
General
u Scalable CPU power for simulation and analysis
u Almost unlimited total channel count
u Common measurement start
u Time synchronization via HW sync and FDX
u System variable exchange via FDX
![Page 13: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/13.jpg)
13
u Split of video files during recording
u Simultaneous recording and splitting of video and logging files (logging trigger used)
u Field codes available for incremented video file names and folder names
Video Configuration dialog
Video Window
General
![Page 14: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/14.jpg)
14
Improved offline configuration
u Activate / deactivate files for offline analyze
u Integrated video file configuration
u Grouping of triggered video files by unique IDs
Offline Mode
General
![Page 15: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/15.jpg)
15
u Mapping Groups allow the configuration of different sets of mapping relations
u Dynamic Mapping Sets can be toggled via CAPL
u SymbolMappingSetDynamicGroup(“Dynamic Mapping 1“)
Mapping Dialog
General
![Page 16: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/16.jpg)
16
u Improved search functionality
u Wildcards * and ? are supported now
u Suspension of search to see all sub elements
u New Navigation Path control
u Shows the path to the selected element
u Allows navigation to parallel elements along the path
Symbol Explorer
General
![Page 17: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/17.jpg)
17
u Support of latest tool versions
u MATLAB/Simulink R2016b…R2018a
u Visual Studio 2015 and 2017
u Support of any data type in the Simulink model
u previously data was implicitly casted to double
u Raw/physical interpretation
u Support of system variables structs
u Create sysvar structs from non-virtual Simulink buses or
u Directly use predefined sysvar structs
MATLAB/Simulink Integration
General
![Page 18: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/18.jpg)
18
u Support for Multi Tasking Models
u Specify different sample times the Simulink code generation options
u Each sample time in the model is mapped to a specific task
u Creation of system variables for task info
u Emulation of a pre-emptive RT OS scheduler
MATLAB/Simulink Integration
General
Different colors = different sample times
![Page 19: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/19.jpg)
19
u Integration of ECU code via vVIRTUALtarget
u Support VN8900 connected via Ethernet in CANalyzer
u End of support for VN8910/A, VT6010, VT6050/A in distributed mode (CANoe RT)
u VN8900 Devices can still be used in Interface Mode
u Graphics Window CAPL API
u CAPL functions to control Clear, Pause, Fit and Time Interval
u CANalyzer: Automates the Graphics Window for manual analysis
u CANoe: Allows screenshot automation for test reports
Miscellaneous
General
![Page 20: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/20.jpg)
20
u Panel Overview WindowThe new window lists all controls and symbols of the selected panel
u You can quickly identify which symbols are assigned to the controls
u Assign symbols to the controls
u Find controls that are hidden or outside the panel
u Switch/IndicatorNow, you can enter not only concrete values but also value ranges for the switch values, e. g. for a digital tank display.
Panel Designer
General
![Page 21: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/21.jpg)
21
Release Information
General
u Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 22: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/22.jpg)
22
u Auto-Read: Send diagnostic requests with a defined cycle time and display selected diagnostic parameters of corresponding diagnostic response
u Trigger a diagnostic request manually to update corresponding response parameter(s)
Diagnostic Parameters Window
Diagnostics
![Page 23: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/23.jpg)
23
Improved Symbol Explorer for Diagnostics
Diagnostics
u Better representation of complex data structures
u Improved display of nested parameters
10.0: 11.0:
![Page 24: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/24.jpg)
24
Diagnostic Parameters as Trigger Block condition
Diagnostics
u Triggering on diagnostic parameter values
u Online- and Offline-mode supported
u No CAPL necessary in offline mode
u No CAPL necessary in online mode as well if corresponding requests are triggered using the Diagnostic Parameter Window
![Page 25: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/25.jpg)
25
u Improved behavior of the OSEK_TP.dll (since CANoe/CANalyzer 10.0 SP3)
u Diagnostic Channel (Tester side) support (new setting in “Diagnostics/ISO TP…” configuration dialog:
Mixed operation of CAN 2.0 and CAN FD
Diagnostics
![Page 26: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/26.jpg)
26
u Diagnostic Authentication using Security Sources configured with the Security Manager
u Display of DTC related parameters (e.g. DTC status byte) in analysis windows (State Tracker, Data-and Graphics Window) only depend on the corresponding DTC, no longer on the position of the DTC in the diagnostic response
u DoIP: Improved simulation behavior for IPv6 in combination with VLAN tags
u New/extended CAPL functions to enable parallel testing using the CAPL Callback Interface (CCI)
u Support sending and receiving of CAN frames with different types, e.g. sending frames with 11 bit ID and receiving frames with 29 bit ID (or vice versa)
Further Improvements
Diagnostics
![Page 27: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/27.jpg)
27
Release Information
General
Diagnostics
u Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 28: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/28.jpg)
28
Together with vTESTstudio 3.0:
u Navigate to a test case, test sequence, test fixture or test group in vTESTstudio as well as to single test commands within a test case
u Navigation supported into the Test Table Editor, the Test Sequence Diagram Editor and the State Diagram Editor in vTESTstudio
u Navigation supported from the CANoe Test Configuration window, the CANoe Test Trace window and the CANoe Test Report Viewer
Navigation into Test Design
Testing (CANoe only)
![Page 29: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/29.jpg)
29
Together with vTESTstudio 3.0:
u Access to communication concept of CANoe
u Dedicated Test Feature Set functionality in .NET C#
u Comfortable test design for e.g.
u Autosar Adaptive
u Ethernet Some/IP
Access to Communication Concept
Testing (CANoe only)
![Page 30: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/30.jpg)
30
u New analysis window “Timeline”
u Timely base, independent from structure
u Very useful for the analysis of activities that start/end across test cases
u Navigation from/to other views is supported
Report Viewer
Testing (CANoe only)
![Page 31: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/31.jpg)
31
u Navigation possibilites
u Navigation to CANoe…> … can be started on timestamps
> Navigation to test cases and further structural elements within test configurations
u Navigation to vSignalyzer (if available) based on timestamps
u Navigation to vTESTstudio based on testcases etc.
u Several further usability enhancements
Report Viewer
Testing (CANoe only)
![Page 32: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/32.jpg)
32
Release Information
General
Diagnostics
Testing (CANoe only)
u VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 33: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/33.jpg)
33
Motivation
u Measurements using VT System modules can now also be started when single or all modules are not available as real hardware
Configuration
u VT System modules can be switched individually or commonly into offline or online mode in the VT System Configuration dialog
u The offline/online state of each module is displayed in the VT System Control dialog
u Activation / deactivation of the VT System is now performed automatically, only dependent on the configuration of VT System modules. The formerly available manual VT System activation in the global options menu is therefore obsolete
u The network adapter for the VT System is now selected directly in the Configuration dialog of the VT System Single access point
for all VT System relevant settings
Offline VT System (1)
VT System
![Page 34: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/34.jpg)
34
Operation
u The offline/online state of each module can be read on
each channel by a corresponding Read-Only System Variable
u All measurement System Variables can be written via an
additional name space "Offline" in order to obtain the
expected test results also in the offline mode
u CAPL and .NET commands which involve VT System modules
return the expected result also when VT System modules are
not physically present or set offline
u The offline/online mode of all VT System modules is stored in
an additional file (*.vtcfg.local) by configurations who use the
VT System workplace specific use
Offline VT System (2)
VT System
![Page 35: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/35.jpg)
35
Motivation
u Successor of discontinued module VT6104
Main Features
u Network Interface Module for VT System
u 4 channels (CAN/LIN/J1708), configurable via piggybacks
u New: CAN FD support for all channels
u Hardware time stamp synchronization
u Relays for short circuit, open wire, bus termination
VT6104A – Network Interface Module
VT System
![Page 36: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/36.jpg)
36
Motivation
u Simulation of wheel speed sensors
u Serving e.g. powertrain or chassis ECUs with sensor signals
Main Features
u Application board for new VT7900 FPGA
u Simulation of wheel speed sensors
u 4 sensor simulation channels
u Voltage + current modulation
VT7820 - Rotation Sensor Simulation Board
VT System
s type
i type
v type
![Page 37: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/37.jpg)
37
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
u AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 38: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/38.jpg)
38
u Product Concept
u The single CANoe options .AMD and .XCP are combined to the new option CANoe .AMD/XCP
u No change of existing license bits required when upgrading to CANoe 11.0
u XCP on Ethernet
u When CANoe .Ethernet is available, a TCP/IP stack instance from any simulation node can be selected for communication with an XCP device
u Allows XCP connections to multiple ECUs with identical IP addresses (durability / end of line tests)
Main Benefits
AMD/XCP (CANoe only)
![Page 39: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/39.jpg)
39
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
u Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 40: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/40.jpg)
41
Option .Scope – New Features (CANoe /CANalyzer 11.0 SPx)
Scope
u New Graphics View with multi view concept
u Faster data representation
u Scope graphic windows support Y-Axis scaling in addition to grid scaling
u Multi cursor concept with generic cursor legend showing detailed information about sample points
u Global markers for each graph view
u One intelligent graph toolbar to control several graph views
u X- and Y-axes of several graph views can be synchronized
u Compare Mode to compare measurements in different graph and trace views
u CAPL Analysis
u Serial bit mask analysis for LIN conformance tests (eg. Duty Cycle Measurement)
u Flexray transition time measurement for single frames
![Page 41: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/41.jpg)
42
Option .Scope – New Features (CANoe /CANalyzer 11.0 SPx)
Scope
u Support of current measurements
u Current is measured using current probes
u Support of new scope hardware (11.0 SP3)
u Up to 4 channels, BNC single-ended
u Up to 16 digital channels (2 ports of 8 channels each)
u Support of signal decode for ARINC 429 specification
![Page 42: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/42.jpg)
43
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
u Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 43: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/43.jpg)
44
u Support of high-performance applications
u All standard functions of VT module still available
u Additional functions by user FPGA
u Full access to I/O hardware of VT module in user FPGA code
u Time-critical functions directly implemented on the VT module
u User-specific pre-processing of input signals
u Fast, precise hardware-generated output signals
u Implement protocol extensions deviating from CANoe standard features
u FPGA design by modeling
u Using Matlab/Simulink® with Altera DSP Builder block set
u Simple design tool for FPGA handling VT FPGA Manager
u Done by user himself or Vector project team
Support of User-Programmable FPGA on VT2710 (since 10.0 SP4)
Sensor
Test Module
user code
test execution
VT SystemCANoe
I/O
Ha
rdw
are
S
yste
m u
nd
er
Te
st
ECU
FPGA/µC – firmware
pre-processing
FPGA - user code
pre-processing
model execution
![Page 44: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/44.jpg)
45
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
u CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 45: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/45.jpg)
46
u Graphical user assistance added to sample configuration
u Sub-panels for trigger and sequence configuration
u Information about interface channel and trigger state
u Enable disturbance on device with feedback
VH6501 – CAN FD Disturbance Interface
CAN / CAN FD
1
2
1 2
3
3
![Page 46: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/46.jpg)
47
u Trigger Configuration Panel
u All CAN / CAN FD fields available
u Definition of bit mask values with dominant, recessive and don’t care
u Drop-Down list for trigger position definition
u Sequence Configuration Panel
u Selectable segment value (dominant, recessive, recessive stress)
u Selection between user defined and pre-calculated durations for arbitration and data phase
u Possibility to define multiple segments
VH6501 – CAN FD Disturbance Interface
CAN / CAN FD
![Page 47: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/47.jpg)
48
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
u Ethernet
LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 48: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/48.jpg)
49
IP Network Monitor
Ethernet
u Monitor for simple interpretation of SOME/IP communication relationship between network nodes
u Easy access to fundamental communication information such as amount of nodes, IP addresses, MAC addresses, VLAN, etc.
u No protocol knowledge required, ideal for reporting
u List of provided and consumed services per node, activity counter and status information
![Page 49: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/49.jpg)
50
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
u LIN
Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 50: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/50.jpg)
51
u Simple interactive configuration of a LIN master simulation
u Allows control of the schedule tables defined in the LDF file
u Control of the NM by simply sending sleep mode frames and wake-up signals
u Easily start and stop the scheduler
u Replaces the LIN Interactive Master
u Works as an independent LIN master
New LIN Interactive Scheduler
LIN
u Previously two blocks were required:
u Master Node Simulation: LIN Master Node from LDF
u Controlling of Master Schedules: LIN IM
u Only one block is required:
u LIN ISC (Interactive Scheduler) simulates the master and controls schedules
![Page 51: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/51.jpg)
52
u New CAPL API to control the LIN Master Mode
u Dynamically activate or deactivate the LIN Master Mode on a communication channel> This allows to dynamically toggle between a real and a simulated Master node in a measurement
u Restrict transmitting headers by selecting the node which models the Master behavior
> Master node defined in the LDF file
> Master node implemented in CAPL
> Master node modeled by a Replay Block
> Master node LIN stack modeled by a Node Layer DLL
Controlling the LIN Master Mode
LIN
Node can transmit headers
Node is blocked: No headers transmitted
![Page 52: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/52.jpg)
53
u New CAPL API that allows to transmit headers with their intended schedule
u Usually a master simulation waits until the network is idle before transmitting e.g. a response
u The new mode does not wait for an idle network but will transmit a header immediately when due> This allows a more accurate modelling of a Master node e.g. when testing a LIN Master stack with CANoe
> A slave node that is responding too slow would lead to a collision
New LIN Header Transmission Mode
LIN
Communication Cycle
LIN-Master
LIN-Slave 1
LIN-Slave 2
LIN-Slave 3
LIN-Frame 1 LIN-Frame 2 LIN-Frame 3
t0 Header 1
t1 Header 2
t2 Header 3
LIN-Schedule
t0 t1 t2Frame-Slot Frame-Slot Frame-Slot
LIN-Bus
Header 1
FrameHeader
TransmitResponse
Frame ResponseAccurate Length
Header 2
FrameHeader
TransmitResponse
Frame ResponseToo Long
Header 3
FrameHeader
TransmitResponse
Frame ResponseAccurate Length
Collision:
Header2 - Response
![Page 53: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/53.jpg)
54
u The Option Scope supports now bit mask analysis for LIN
u This allows automated physical layer tests
u CANoe will provide a sample configuration that shows a LIN duty cycle measurement
Option .Scope for LIN: Bit Mask Analysis
LIN
LIN Bittiming Analysis
Sample Configuration: Measure LIN Duty Cycle
![Page 54: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/54.jpg)
55
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
u Car2x
J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 55: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/55.jpg)
56
u Car2x scenario editor provides GUI to easy and fast configure a traffic scenario
u CANoe.Car2x imports the scenario and uses the data to createthe according Car2x communication
New Car2x Scenario Editor
Car2x
![Page 56: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/56.jpg)
57
u GUI to create routes and ITS stations on a map
u Configuration of speed and position of the ITS stations
u Scenario specific attributes can be added to configure the behavior
New Car2x Scenario Editor
Car2x
![Page 57: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/57.jpg)
58
u Timeline Window allows to scroll to a specific time or waypoint
u Attributes allows to configure scenario specific behavior
u Keypoints to define values at a specific time
New Car2x Scenario Editor
Car2x
Attributes
Keypoints
![Page 58: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/58.jpg)
59
u Car2x Scenario Manager imports scenario data
u Car2x IL can access the scenario data> Scenario Nodes are automatically mapped to database nodes
> Automatic assignment of scenario data to Car2x application messages
u Specific Nodelayer functions available > To start and stop a scenario from CAPL
> To access the scenario data from scenario manager
> Callback functions which are called if a keypoint changes
New Car2x Scenario Editor
Car2x
![Page 59: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/59.jpg)
60
u Automatic visualization of Car2x events in the Map window
u Content of BSM and DENM messages are automatically visualized
u Visualized content are event code (causeCode), path points and relevance area
u The map window details view lists the detected events> Fast overview of received events
> Fast location of events in the map window
> Fast access to frame which transmitted the event via doubleclick on event
Extended analysis of Car2x application messages
Car2x
![Page 60: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/60.jpg)
61
u Security
u Support of new security specification ETSI TS 103097 v1.3.1
u GeoNetworking Protocol
u Support of new GeoNetworking specification ETSI EN 302 636-4-1 V1.3.1
Protocol support
Car2x
![Page 61: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/61.jpg)
62
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
u J1939 / ISO11783
Summary
Agenda
Skip topic
![Page 62: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/62.jpg)
63
u Easy configuration with panel
u Well structured report
J1939-82 Compliance Test: 2015 specification has been implemented
J1939 / ISO11783
![Page 63: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/63.jpg)
64
u CANoe/CANalyzer: J1939 ARXML System Description can be used together with DBC files
Support for J1939 AUTOSAR (Version 4.2.2)
J1939 / ISO11783
DBC
ARXML
![Page 64: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/64.jpg)
65
u ISO11783_IL can simulate both the TIM Server and the TIM Client
u A comprehensive set of CAPL functions makes it possible to configure a TIM simulation as required
u The trace window provides specialized intelligent filters that clearly arrange TIM-relevant messages
ISO11783 Tractor Implement Management (TIM)
J1939 / ISO11783
![Page 65: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/65.jpg)
66
Release Information
General
Diagnostics
Testing (CANoe only)
VT System
AMD/XCP (CANoe only)
Scope
Sensor
CAN / CAN FD
Ethernet
LIN
Car2x
J1939 / ISO11783
u Summary
Agenda
Skip topic
![Page 66: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/66.jpg)
67
Main Benefits
Summary
u Communication concept to address service oriented architectures (SOA) and adaptive AUTOSAR
u Security Support – TLS/SecOC support
u Support for Multi Tasking Simulink models – emulation of a RT OS scheduling
u Offline VT System – setup and configuration of VT systems without physical connection
u VH6501 CAN disturbance interface – graphical panels for trigger and sequence configuration
u New licensing and installation concept – MSI compliant installer, tool characteristics determined by license only
![Page 67: CANoe/CANalyzer New Features...2017/04/10 · u New analysis window “Timeline” u Timely base, independent from structure u Very useful for the analysis of activities that start/end](https://reader033.vdocuments.us/reader033/viewer/2022051407/5feda4f8a0fddc379e7acd08/html5/thumbnails/67.jpg)
68 © 2017. Vector Informatik GmbH. All rights reserved. Any distribution or copying is subject to prior written approval by Vector. V1.0 | 2018-04-10
Author:PND8Vector Germany
For more information about Vectorand our products please visit
www.vector.com