cambium 450i launch materials - tcom.azureedge.net/media/files/tcom/knowledge-center/... · cambium...
TRANSCRIPT
Cambium 450i Launch Materials
July 2015
Cambium 450i: Key System Features
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 2
• Product Mission Statement:
– Cambium Network’s 450i product platform is the most scalable industrial-grade wireless broadband solution available.
– Triple the Processing Power
– Triple the Range
Improved Tx Power, Improved Rx Sensitivity
– PMP 450i: Now INDUSTRIAL STRENGTH!
Cambium 450i: Key System Features
Features Customer Benefit / Competitive Advantage
Ultra-wideband Radio (4900 – 5925 MHz)
One SKU to allow operation in all 5 GHz unlicensed bands, including support for 4.9 GHz licensed band.
Rugged Enclosure Specified using Industrial-rated components. Designed to meet IP66 and IP67 ratings for harsh environments. Optional ATEX/HAZLOC certified models available for hazardous deployments.
Dynamic Interference Filtering
Industry leading interference mitigation techniques to eliminate off channel noise impact to the system.
Updated SoC (FPGA) chipset
Triple the processing power compared to PMP 450. Allows for future platform enhancements, including 40 MHz channel bandwidths (doubling the capacity).
Multifunction AUX port A second Ethernet port with multiple functions allow for greater flexibility of deployment: add a camera or other PoE device directly, provide GPS timing in/out and an audible alignment tone.
Improved Transmit Power and Receive Sensitivity
Triple the range when additional power is allowed. Maintain higher output (therefore better coverage) when less powerful antennas may be employed. Increased range of every modulation. Link budgets are improved 7-10 dB when compared to PMP 450.
Updated Power Scheme Industry standard 802.3at PoE compatible.
Architectural Flexibility Ability for the Subscriber Modules (PMP) to become Backhauls (PTP)
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 3
PMP 450i and PTP 450i
• New Radio Design – Ultra Wide-band radio – 4900 to 5925 MHz support – Opens up new frequency bands (4.9, 5.1 and 5.2) – Includes Dynamic Interference Filtering – Improved Radio Characteristics
Increased Transmit Power Better Receive Sensitivity
• New FPGA / SoC architecture – Platform evolution to new generation processor – Expect to triple processing power of radio at launch
with path to >75k PPS – Allows for wider channel support leading to more
throughput
• Ruggedized, IP66/67
– Visually similar to PTP 650 – All metal construction – Increased Reliability in harsh environments – Optional ATEX/HAZLOC certified models available
• New Power scheme – 802.3at PoE compatible – Aux port with PoE Output
Allows direct connection of camera or other equipment
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 4
Available July 2015!
PMP/PTP 450i – High Gain Directional SM
• Integrated Flat Panel Antenna – 23 dBi Gain – 12” x 12” panel – 11° azimuth and elevation – Compact design – Easy Alignment and Installation – Can also function as PTP 450i
• New Tilt Bracket Assembly – Sturdy mounting bracket – Reasonably priced – Reduce installation time and effort
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 5
PMP/PTP 450i – Connectorized Radio
• Connectorized Radio
– Access Point
with current PMP 450 Sector
Antenna
Same mounting points at PMP
450 AP, so can replace that
radio on same antenna if
necessary
– Connectorized SM or BH
Pair with any dual pol antenna
to maximize gain
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 6
PMP 450i – Integrated Access Point
• Integrated AP
– 90° Sector Antenna (3 dB rolloff)
– 16 dBi Gain
– Only 5.5 lbs
– Easy to install, compact design
– Front-to-back isolation not suitable for
frequency re-use
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 7
Cambium 5GHz Sector Antenna
• Performance Differentiation
– Will replace Integrated Access Point
– Integrated 2x2 Dual-Pol Sector
– Optimized for ABAB channel re-use
– Null-fill
– Improved gain response across frequency and azimuth
– Easy to install
• Key Specifications
– 4.9 to 6.1 GHz
– 90 degree (3 dB beam width)
– 120 degree (6 dB beam width)
– Front/Back Ratio: > 32 dB
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 8
Available January 2016
Ruggedization
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 9
Cambium Networks
BUILT TO RUN, BUILT TO LAST
10
Mean Time Between Failure
MTBF excluding
lightning damage > 100
years
Wide Temperature Range
-40º to +140º C
-40º to +60º C
Wind Speed Survival
200 mph
More Than
5 Billion
Field Hours in service
Copyright 2015 Cambium Networks, Inc. All Rights Reserved.
Industry Track Record
More than 10 years experience
450i AUX Port
• Multiple Uses / Single RJ-45 Port
– Secondary Data Port (video camera; Wi-Fi hotspot)
100BaseT
PoE output (compliant with 802.3at)
– Sync
Powers external GPS Receiver
Receives sync signal OR generates sync signal (Remote AP applications)
Receives GPS serial data (statistics)
– Alignment tone
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 11
450i SYNC Options
Today Capabilities Requirements
CMM4 Power and SYNC Mixture of 450i, 450, 100
56V power supply RJ-45 Adaptor cables
uGPS SYNC Custom RJ-45 to RJ-12 cabling
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 12
Roadmap Capabilities Requirements
CMM5 Supports GigE Mix 650, 450i, 450, 100
56VDC Power Supply
GPS Module SYNC RJ-45 cable to AUX Port
450i POWER SUPPLY OPTIONS
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 13
AC Power Injector AC+DC Power Injector
Model # N000065L001B C000065L002A
Key Attributes Low-cost
Up to 60W
Extended Temperature Range Required for AUX port powering
48 VDC input 48 VDC output to resilient-mode
Supports longer cable runs Provides power to TDM Module
Inputs 120-240VAC 120-240VAC
48VDC
Temperature Range
0° C to 40° C 32° F to 104° F
-40° C to +60° C -40° F to 140° F
GigE Surge Suppressor
Copyright 2015 Cambium Networks, Ltd. All rights reserved.
Model Number C000000L033A
Connectors 2 x RJ-45 1000BaseT
Power 56VDC nominal (compatible with PMP/PTP 450i)
Protection Mode Line-to-Line and Line-to-Ground
Response time 5 ns, typical
Surge Rating 172A, 10/100 µs
Operating Temperature -40° F (-40C) to +140° F (+60C)
Operating Humidity 100% condensing
Mounting Pole or wall-mount
Dimensions 118 x 88 x 46 mm
Weight 0.16 kg
Environmental Protection
IP54
14
ATEX and HAZLOC Certified
ATEX (Atmospheres Explosibles) Equipment Group II
Category 3 / Zone 2
Gas Group IIC
Temperature Class T4
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 15
HAZLOC (Hazardous Locations)
Class 1 Location
Division 2
Gas Groups A, B, C, D
PMP 450i will also be available with ATEX / HAZLOC Certification
ATEX / HAZLOC Oil & Gas Applications
• Target Markets: – PetroChem
– Utility (Generation and Transmission)
– Defence
• Solution: – PTP 700 and 450i Series
– 4. 9 to 5.85 GHz
– ATEX and HAZLOC Compliant
– Dedicated SKUs
• Value Proposition – Universal radio for all applications
Non LOS
Over Water
Over long distance
High RF interference
– Avoid expensive NEMA
– Established field reliability
– Easy to plan and install link
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 16
17
Traditional Fixed Filter Makes Radio Susceptible to Neighboring Channel Interference
Cambium’s Dynamic Filtering Wraps around selected channel, Filtering out Interference from Neighboring Channels
Selected Channel
Static Filter
Dynamic Interference Filtering
Spectrum
Copyright 2015 Cambium Networks, Ltd. All rights reserved.
4.900 GHz
5.925 GHz
Clean Channel
Selected Channel
Dynamic Filter
Static Filter
Interference from Neighboring Channels Impacting the Radio
RADIO
Dynamic Filter
LINKPLANNER
Configuration Detail
Performance Summary
Path Profile
18 Copyright 2015 Cambium Networks, Ltd. All rights reserved.
LINKPlanner now does PMP
19 Copyright 2015 Cambium Networks, Ltd. All rights reserved.
LINKPlanner Features
• Planning
– PTP performance and availability
– PMP link budget
– Scenario planning
• Reports
– Bill of Materials
– Proposal
– Installation
• Products Supported
– PTP 250, 500, 600, 650
– PTP 800, 810, 820
– ePMP 1000, PMP 450 and PMP 450i (July)
20 Copyright 2015 Cambium Networks, Ltd. All rights reserved.
Cambium 450i Platform Summary
• Industry leading PMP and PTP solution for critical networks • Proven field reliability
– Built upon our quality legacy (preceding product fielded for >10 years) – >40 Year calculated MTBF (based on field returns and reliability testing)
• Extreme Scalability – Access Points can support many subscribers – Many Access Points can be deployed at each site for maximal throughput
• OFDM MIMO – 2x2 MIMO provides high bandwidth for LOS access – Single payload modulations provide link enhancement for nLOS and NLOS
• GPS synchronization – Maximize spectral efficiency, frequency re-use across network – Minimize self-interference, maintain low and consistent latency
• Robust Roadmap for future platform enhancements – Serving customer needs for years to come
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 21
Cambium 450i Ordering Guide
Copyright 2015 Cambium Networks, Ltd. All rights reserved.
1. Many available SKUs for this platform
2. PTP links priced competitively against PTP 450, and lower than PTP 650
3. License keys available to convert SM to BH
4. SM available in high gain (23 dBi) or connectorized options
5. AP available in Integrated (16 dBi, 90°) or connectorized options
6. AP has several SKUs that are region-specific (US, Canada, EU, ROW, DES-only)
7. New Accessories are available
Cambium 450i Pricing and Tiering
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 23
Product Structure Changes
• Radios and accessories sold individually (no PSU or bracket included)
• Several variation hardware modules
– Connectorized or Integrated
– FCC; IC; EU; RoW; DES-Only
• Software license keys
– Can upgrade the SM to BH
• Power Supply options
– AC+DC Power Injector (AC+DC, resilient operation, supports aux poe out, extended temperature range)
– AC Power Injector (low-cost)
– DC Power converter – Convert -48 VDC to +56 VDC
• Synchronization options available
– CMM4 using 56 VDC Power supply and dongle (or correct Ethernet cable)
– UGPS
• Mounting Kits sold separately
– New Tilt Bracket Assembly
– Traditional Articulating Mount for Integrated PTP radios
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 24
New Accessories
Category Part numbers MSRP Notes
Surge Suppressor
C000000L033A $35 New Gigabit surge suppressor
Power Supply N000065L001B C000065L002B N000000L034A
$80 $380 $35
56 VDC, 60W supply Enhanced AC+DC Power Injector 56 VDC, 30W supply (available soon)
AC Line Cords
N000065L003A N000065L004AN000065L005A
$20 $20 $20
US Line Cord Fig 8 (IEC-60320 Type C7) UK Line Cord Fig 8 (IEC-60320 Type C7) EU Line Cord Fig 8 (IEC-60320 Type C7)
Mounting Brackets
N000045L002A N000065L031A
$29 $80
New Tilt Bracket Assembly should cover most installations PTP articulating mount can be used for demanding installations
Spare Glands (10 Pack)
N000065L033A $400 PG16 style gland spares for use with AUX port on radios
Adapter for CMM4
N000045L001A $29 Ethernet Cable adapter for CMM4
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 25
Overview: PMP 450i Architecture
Operator’s
IP Network
C3VoIP
Base Station
AP Cluster
(Up to 12)
SS
SS
AP: Access Point SM: Subscriber Module
SS:– Surge Suppressor IP: Internet Protocol
CMM: Cluster Management Module C3VoIP – Cambium ATA Router
C A N O P Y
CMM
Subscriber Module
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 26
Ordering a PMP 450i Step by Step
First, visit LINKplanner!
1. Select Integrated or Connectorized Access Points (for your region)
2. Select Integrated or Connectorized Subscriber Modules
3. Select optional accessories
– 3a. Add Lightning Protection
– 3b. Do you require UGPS or CMM4 for sync?
– 3c. Add Power Supplies, Line cords and mounting kits
4. Select optional installation Tools
– Cable and connectors
5. Select a warranty period
6. Do you need spares?
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 27
MSRP Part Number List
Part Number Description MSRP
C050045A001A 5 GHz PMP 450i Connectorized Access Point (ROW) $2,895
C050045A002A 5 GHz PMP 450i Connectorized Access Point (FCC) $2,895
C050045A003A 5 GHz PMP 450i Connectorized Access Point (EU) $2,895
C050045A004A 5 GHz PMP 450i Connectorized Access Point (DES Only) $2,895
C050045A005A 5 GHz PMP 450i Integrated Access Point, 90 degree (ROW) $3,195
C050045A006A 5 GHz PMP 450i Integrated Access Point, 90 degree (FCC) $3,195
C050045A007A 5 GHz PMP 450i Integrated Access Point, 90 degree (EU) $3,195
C050045A008A 5 GHz PMP 450i Integrated Access Point, 90 degree (DES Only) $3,195
C050045C001A 5 GHz PMP 450i Connectorized Subscriber Module $649
C050045C002A 5 GHz PMP 450i SM, Integrated High Gain Antenna $699
C050045B001A 5 GHz PTP 450i END, Connectorized (ROW) $895
C050045B002A 5 GHz PTP 450i END, Integrated High Gain Antenna (ROW) $995
C050045B003A 5 GHz PTP 450i END, Connectorized (FCC) $895
C050045B004A 5 GHz PTP 450i END, Integrated High Gain Antenna (FCC) $995
C050045B005A 5 GHz PTP 450i END, Connectorized (EU) $895
C050045B006A 5 GHz PTP 450i END, Integrated High Gain Antenna (EU) $995
C050045B007A 5 GHz PTP 450i END, Connectorized (DES Only) $895
C050045B008A 5 GHz PTP 450i END, Integrated High Gain Antenna (DES only) $995
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 28
MSRP Part Number List (ATEX/HAZLOC)
Part Number Description MSRP
C050045A009A 5 GHz PMP 450i Conn Access Point (ROW), ATEX/HAZLOC $5,695
C050045A010A 5 GHz PMP 450i Conn Access Point (FCC), ATEX/HAZLOC $5,695
C050045A011A 5 GHz PMP 450i Conn Access Point (EU), ATEX/HAZLOC $5,695
C050045A012A 5 GHz PMP 450i Integrated Access Point, 90 degree (ROW), ATEX/HAZLOC $5,995
C050045A013A 5 GHz PMP 450i Integrated Access Point, 90 degree (FCC), ATEX/HAZLOC $5,995
C050045A014A 5 GHz PMP 450i Integrated Access Point, 90 degree (EU), ATEX/HAZLOC $5,995
C050045C003A 5 GHz PMP 450i Conn Subscriber Module, ATEX/HAZLOC $1,149
C050045C004A 5 GHz PMP 450i Integrated High Gain Antenna, ATEX/HAZLOC $1,199
C050045B009A 5 GHz PTP 450i END, Connectorized (ROW), ATEX/HAZLOC $2,495
C050045B010A 5 GHz PTP 450i END, Integrated High Gain Antenna (ROW), ATEX/HAZLOC $2,695
C050045B011A 5 GHz PTP 450i END, Connectorized (FCC), ATEX/HAZLOC $2,495
C050045B012A 5 GHz PTP 450i END, Integrated High Gain Antenna (FCC), ATEX/HAZLOC $2,695
C050045B013A 5 GHz PTP 450i END, Connectorized (EU), ATEX/HAZLOC $2,495
C050045B014A 5 GHz PTP 450i END, Integrated High Gain Antenna (EU), ATEX/HAZLOC $2,695
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 29
PMP 450i Example BOM
LINKPlanner will generate the BOM for you
Example: Deployment of a single sector in the US, using a connectorized AP with existing 90° sector antenna and 10 Integrated SMs, with UGPS and standalone Power Supplies.
Part Number Description Qty.
C050045A002A 5 GHz PMP 450i Connectorized Access Point (FCC) 1
85009324001 5.4-6.0 GHZ, ANTENNA FOR 90 DEGREE SECTOR 1
C050045C002A 5 GHz PMP 450i SM, Integrated High Gain Antenna 10
N000065L001B 56 VDC, 60W supply 11
N000065L003A US Line Cord Fig 8 (IEC-60320 Type C7) 11
1096H UGPS 1
N000045L002A Tilt Bracket Assembly 10
C000000L033A Gigabit Surge Suppressor 11
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 30
Thank You!
Copyright 2015 Cambium Networks, Ltd. All rights reserved. 31